Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date10 Dec 2024
Closing Date18 Dec 2024
Tender Amount₹ 25,00,000
Costs
EMD
₹ 50,000Document Cost
₹ 600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_267524_1Bid Award Id
ViewTender No
NIT No. 38 of 2024-25 Dated 09-12-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
1
6
6.75
... More
Demolishing brick work manually/by mechanical means including
stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge In cement mortar
1
1458
1458.45
... More
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) :From brick work in cement mortar
1
4944
4944.1
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :
A. Of area of 3 sqm. and below
1
285
285.25
... More
B. area beyond 3 Sqm.
1
390
390.5
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :
A. Of area of 3 sqm. and below
1
110
110.05
... More
B. of area beyond 3 Sqm.
1
145
145.75
... More
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
1
83
83.45
... More
Demolishing mud phaska in terracing and disposal of material within 50 meters lead
1
647
647.15
... More
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
1
38
38.9
... More
Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand
1
441
441.4
... More
Renewing glass panes, with putty and nails wherever necessary including raking out old putty :
A. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
1
991
991
... More
B. Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)
1
1130
1130.85
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level. A. 1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed
1
4826
4826.5
... More
B. 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone agg. 40mm nominal size) crushed
1
5202
5202.9
... More
C. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) crushed
1
5733
5733.6
... More
D. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) with 20% boulders
1
4818
4818.1
... More
E. 1:2:4 (1 cement : 2 coarse sand :4 graded crushed stone agg. 20mm nominal size) crushed
1
659
659.25
... More
F. 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
1
7275
7275.25
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
7571
7571.55
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
... More
Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:
1
142
142
... More
Extra for brick work in:Square or rectangular pillars
1
756
756.1
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
947
947.25
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
1
159
159.65
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1
cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
1
416
416.5
... More
Centering and shuttering including strutting, propping etc and removal of form work for:-
A.Foundation, footing, bases of columns.
1
286
286.35
... More
B. Suspended floors, roofs, Landing, balconies and access platform.
1
718
718.2
... More
C. Shelves (Cost in Situ)
1
718
718.2
... More
D. Edges of slab and breaks in floors and walls under 20 mm wide
1
262
262.2
... More
Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centering, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9588
9588.05
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1
181
181.6
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit
1
1760
1760.5
... More
Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.
1
545
545.75
... More
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead.
1
51
51.45
... More
White washing with lime to give an shades A. Old work (Two or more coats)
1
17
17.75
... More
B. Old work ( One or more coats)
1
10
10.8
... More
Removing white or colour wash by scrapping and sand papering and
preparing the surface smooth including necessary repairs to scratches etc. complete.
1
14
14.5
... More
Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.
1
50
50.7
... More
Removing dry or oil bound distemper, water proofing cement paint and
the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
18
18.7
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
1
88
88.6
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
1
86
86.75
... More
15mm Cement plaster on the rough side of single or half brick wall of mix:
A. 1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
... More
B. 1:4 (1 cement : 4 coarse sand)
1
327
327.85
... More
20 mm cement plaster of mix.1:6 (1 cement : 6 coarse sand)
1
390
390.05
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
1
164
164.6
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
1
66
66.85
... More
Finishing walls with acrylic smooth exterior paint of required shade on
New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1
185
185.2
... More
Finishing walls with water proofing cement paint of required shade on
New work (two or more coats applied @ 3.84 kg/10sqm)
1
98
98.75
... More
Finishing walls with water proofing cement paint of required shade:Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
1
94
94.85
... More
Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work
1
53
53.6
... More
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
1
149
149.05
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
1
86
86.75
... More
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
1
136
136.75
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
1
131
131.85
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
A. 1 mm thick.
1
138
138.1
... More
B. 2 mm thick
1
181
181.05
... More
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:
A. Internal work-exposed on wall with clamps at 1.00 meter spacing
1216 (16mm OD) pipe
1
289
289.3
... More
1620 (20 mm OD) pipe
1
322
322.4
... More
2025 (25 mm OD) pipe
1
425
425.1
... More
B. Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc.
1216 (16mm OD) pipe
1
492
492.35
... More
1620 (20 mm OD) pipe
1
515
515.7
... More
2025 (25 mm OD) pipe
1
632
632.85
... More
Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc Internal work-Exposed on wall
15 mm dia nominal bore (Medium)
1
360
360.55
... More
20 mm dia nominal bore (Medium)
1
431
431.2
... More
25 mm dia nominal bore (Medium)
1
529
529.7
... More
Providing and fixing G.I Pipes complete with G.I fittings including trenching and refilling etc (External work)
15 mm dia nominal bore (Medium)
1
206
206.5
... More
20 mm dia nominal bore (Medium)
1
255
255.2
... More
25 mm dia nominal bore (Medium)
1
339
339.25
... More
Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete.
15 mm nominal bore
1
264
264.25
... More
20 mm nominal bore
1
288
288.3
... More
25 mm nominal bore
1
320
320.4
... More
Providing and fixing on wall face un-plasticized - PVC moulded
fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Coupler 75 MM dia pipe
1
134
134.1
... More
110 MM dia pipe
1
179
179
... More
Providing and fixing PVC moulded fittings/accessories for PVC pipes including jointing with seal ring complete (Finolex / Supreme/Prince make)
75mm dia Plain bend
1
114
114.05
... More
110 mm dia Plain Bend
1
183
183.05
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
5493
5493.25
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.
1
5632
5632.4
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
1
4841
4841.2
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
1
1474
1474.15
... More
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity -White
1
1163
1163.85
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid.
1
673
673.6
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :
450x300x150 mm size
1
4855
4855.4
... More
600 x 450x 200 mm size
1
6139
6139.85
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board
A. 610x460mm bowl depth 200mm
1
3723
3723.55
... More
B. 470x420 mm bowl depth 178mm
1
3308
3308.8
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32mm dia
1
137
137.4
... More
Providing and fixing C.P fitting (Jaquar (Essco) /Marc/Cera make)
Short Nose bib cock
1
583
583.25
... More
Long Nose bib cock
1
712
712.6
... More
Angle Valve
1
582
582.35
... More
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1
8
8.75
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement
: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III)8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
11533
11533.5
... More
Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
9059
9059.2
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) A. Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
481
481.95
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
B. Powder coated aluminum (minimum thickness of powder
coated 50 microns)
1
607
607.4
... More
C. Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
1
522
522.7
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides.
1
933
933.35
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
1
1584
1584.45
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness
1
2407
2407.05
... More
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
456
456.4
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
A. 300 x 16mm
1
298
298.75
... More
B. 250 x 16mm
1
251
251.95
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
A. 200 x 10 mm
1
95
95.35
... More
B. 150 x 10 mm
1
83
83.8
... More
C. 100 x 10 mm
1
63
63.35
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
A. 125mm
1
68
68
... More
B. 100mm
1
60
60
... More
C. 75mm
1
51
51.95
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,
1
10401
10401.5
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
A. Second class Deodar wood : 30mm thick
1
3284
3284.7
... More
B. Second class Deodar wood : 35mm thick
1
3665
3665.8
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
1
1367
1367.25
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood 35mm
1
4256
4256
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class Teak wood
A. 50x12mm
1
214
214.75
... More
B. 50 x 20mm
1
275
275.05
... More
Providing and fixing brass curtain rods of wall thickness 1.25 mmwith two
brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.
A. 20 mm diameter.
1
318
318
... More
B. 25 mm diameter.
1
398
398.25
... More
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 kg/Cum of earth and gobri leeping with bhusa at 3.5kg/cum 8 earth and mixed with 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed (1 cement : 3 fine sand) with 2% of integal water proofing compound by weight of cement and finsihing neat with hand moulded FPS brick tiles.
1
1063
1063.8
... More
Extra for every additional 1 cm thickness of mud phaska.
1
20
20.4
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase
1
241
241.45
... More
Making khurras 45x45cm with average min. thickness of 5cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) over pvc sheet 1mx1mx400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
262
262.9
... More
Providing and laying water proofing treatment in sunkan portion of WCs, bathroom etc. by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. b)Second layer of sullary of cement @ 04242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curring for 48 hours. The Rates includes prepration of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.
1
485
485.1
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound
consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours.
The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately)
For the purpose of measurement the entire treated surface will be measured.
1
556
556.2
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
A. 40mm thick with 20 mm nominal size stone aggregate
1
510
510.25
... More
B. 50 mm thick with 20 mm nominal size stone agg (Crushed)
1
562
562.15
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, ofrequired size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed withmatching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Raj Nagar plain white marble/Udaipur green marble/zebra black marble Granite of any colour or shade (Area of slab upto 0.5 sqm) 16mm
1
4550
4550.35
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work
1
381
381.7
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
1
246
246.2
... More
Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S Flats square or round bars etc incl. priming coat with approved steel primer all complete.
A. Fixed to steel windows by welding
1
212
212
... More
B. Fixed to openings / wooden frames
1
231
231.15
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). ; Size of tile 60x60 cm
1
1490
1490.05
... More
Providing and laying integral cement based water proofing treatment including prepration of surfaces as required for treatment of roofs, balconies, terracies etc consisting of following operations a) applying a slurry coat of neat cement using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC Slab including adjoining walls upto 300mm height including cleaning the surface before treatment b) Laying brick bats with mortar using broken bricks/ Brick Bats 25mm to 115mm size with 50% of Cement mortar 1:5 (1 Cement : 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 Cement: 5 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of Junctions of walls and slabs) c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. d) finishing the surface with 20mm thick jointless cement mortar of mix 1 :4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved byEngineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finially finishing the surface with trowel with neat cement slurrv and making pattern of 300x300mm/sq 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurra as 65 mm.
1
1404
1404.65
... More
Providing and fixing of electrification as per necessisty at site
1
200
200
... More
Supply of labour for repair works
Black smith Ist class
1
784
784
... More
Carpanter Ist class
1
784
784
... More
Carpenter 2nd class
1
714
714
... More
Mason Ist class
1
784
784
... More
Mason 2nd class
1
714
714
... More
Painter
1
714
714
... More
Mazdoor
1
539
539
... More
Provding and fixing wall lining using heavy duty PVC panels [NSI]
1
120
120
... More
Provding and fixing ceiling using heavy duty PVC panels [NSI]
1
150
150
... More
Provding and fixing wall lining using heavy duty WPC panels [NSI]
1
300
300
... More
Providing and fixing Gypsum board ceiling including required accessories design as per direction of Engineer - In - Charge. [NSI]
1
250
250
... More
Carriage of material by M.T incl loading/unloading & stacking complete Reasi Sub- Division A.Brick av. Lead 80 km
1
3421
3421.41
... More
B. Brick tile av. Lead 80 km
1
1701
1701.85
... More
C. Sand av. Lead 10 km
1
275
275.66
... More
D. Stone agg. Below 40 mm nominal size av. Lead 10 km
1
275
275.66
... More
E. Disposal of material 3 km
1
327
327
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.( Group C)
1
990
990
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
1057
1057
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1
308
308
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as
required.
A .2 x 1.5 sq. mm + 1 x 1.5 sq mm earth wire
1
146
146
... More
B. 2 x 2.5 sq mm + 1 x 2.5 sq. mm earth wire
1
167
167
... More
C. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire
1
200
200
... More
D. 2 x 6 sq.mm + 1 x 6 sq.mm earth wire
1
249
249
... More
E. 4 X 4 sq. mm + 2 X 4 sq. mm earth wire
1
308
308
... More
F. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
1
394
394
... More
G. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
1
543
543
... More
Supplying and drawing 1*1.5 sq. mm FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed / PVC conduit for Invertor wiring as required.
1
29
29
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. A. 5/6 A switch
1
85
85
... More
B. 15/16 A switch
1
132
132
... More
C. 3 pin 5/6 A socket outlet
1
111
111
... More
D. 6 pin 15/16 A socket outlet
1
175
175
... More
E. Blanking plates
1
32
32
... More
F. 2 Module step type electronic fan regulator
1
342
342
... More
G. 5Amp Plug top
1
90
90
... More
H. 15 Amp Plug Top
1
150
150
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface /recess including cutting the wall and making good the same in case of recessed conduit as required. A. 25 mm
1
90
90
... More
B. 40 mm
1
130
130
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular
switch, connections etc. as required.
1
401
401
... More
Supplying and fixing suitable size modular plate and cover in front on existing GI box including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
351
351
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
495
495
... More
Supplying and fixing following way,Three pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Double Door.
A. 4 way (4 + 12), Double door
1
3068
3068
... More
B. 8 way (4 + 24), Double door
1
4601
4601
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
A. Single Pole 10/16/20 Amp.
1
199
199
... More
B. Single Pole Neutral 40 Amp.
1
2095
2095
... More
C. Triple pole and neutral 100 Amp.
1
3650
3650
... More
D. Triple pole and neutral 63 Amp.
1
2777
2777
... More
E. Blank Plates
1
47
47
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required A. 50 mm dia
1
388
388
... More
Fabrication, supplying, installation testing and commissioning of sub main pannel made out of 2mm thick M.S. sheet, floor mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors duly painted, with provision for fixing of 3 nos. incomer FP MCCB, including providing and fixing of aluminium bus bar 500 amp. 3 phase 2 set., aluminium bus bar 200 amp. Main Panel =
1
2100
2100
... More
Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. A. MCCB FP 250 Amp 36 KA
1
17272
17272
... More
B. MCCB FP 125 Amp. 36 KA
1
7504
7504
... More
C. MCCB FP 63Amp. 18KA
1
6000
6000
... More
D. MCCB FP 40 Amp. 36 KA
1
5000
5000
... More
E. MCB Strip
1
600
600
... More
F. Aluminium bus bar suitable for 300 Amp
1
1800
1800
... More
G. Aluminium bus bar suitable for 200 Amp
1
1500
1500
... More
H. Change Over Switch FP 200 Amp. MCCB type
1
15500
15500
... More
I. CT Set of suitable rating
1
1000
1000
... More
J. Indicating lamp
1
200
200
... More
H. Selector switch
1
300
300
... More
I. Voltmeter 0- 500 volt
1
1000
1000
... More
J. Ammeter 0-500Amp
1
1000
1000
... More
Supplying and Laying of PVC insulated and PVC sheathed XLPE Power Cable of following rating direct in ground including excavation and refiling the trench etc as required including carriage upto site of work.The laying of cable in ground should be in the suitable size PVC pipe and suitable size G.I Pipe under flooring/ road crossing. (Main and Sub Main Aluminium Armoured Cable).
A. 10 Sq.mm x 4 Core Armoured
1
200
200
... More
B. 70 Sq.mm x 3.5 Core Armoured
1
450
450
... More
C. 120 Sq.mm x 3.5 Core Armoured
1
950
950
... More
Supplying and fixing of Following light fitting with lamps on ceiling/ wall with necessary connection from ceiling rose to fitting by twin core flexible copper wire etc as required.
A. Surface and wall mounted 10 watt LED tube light fitting. Havells/Philips.
1
1000
1000
... More
B. Surface and wall mounted 20 watt LED tube light fitting. Havells/ Philips.
1
1450
1450
... More
C. Recess mounting luminarie with high brightness 600mm x 600 mm size. Havells/Syska 36W
1
2999
2999
... More
D. Recess mounting luminarie with high brightness 300mm x 300 mm size. Havells 14W
1
1950
1950
... More
E. Recess mounting luminarie with high brightness 250mm x 250 mm size. Havells 18W
1
1850
1850
... More
F. Supplying and fixing of LED mirror light 10W.
1
850
850
... More
G. Supplying and fixing of LED concelled light 5 watt. Wipro
1
900
900
... More
H. Supplying and fixing of 100 watt LED Flood Light including connections etc. as required. Wipro/Anchor
1
8500
8500
... More
Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply.
A. Ceiling Fan (including Providing and fixing of 1.5' long fan rods) 5 Star rating. 1200 mm Sweep.
1
3000
3000
... More
B. Exhaust Fan 250mm
1
2000
2000
... More
C. Exhaust Fan 300 mm
1
2500
2500
... More
D. Wall Fan 450 mm
1
3500
3500
... More
E. Wall Fan 600 mm Heavy duty
1
5000
5000
... More
F. Supplying installation, testing and commissioning of sinewave invertor complete Tabular batteries of rating 200AH and Trolly.
1
60000
60000
... More
Providing and fixing of Split AC's [NSI] Samsung, LG, Volts, Blue Star or equivalent a. 1 Tonne with Stablizer
1
45000
45000
... More
b. 1.5 Tonne with Stablizer
1
55000
55000
... More
c. 2.00 Tonne with Stablizer
1
70000
70000
... More
Servicing of Window AC's [NSI]
1
600
600
... More
Servicing of Split AC's [NSI]
1
1000
1000
... More
Servicing of Water Purifier's incl. changing of candles [NSI]
1
5000
5000
... More
Providing and fixing of Water Heater [Gyser] including all required accessories [NSI] a. 15Ltr
1
8000
8000
... More
b. 25Ltr
1
12000
12000
... More
c. 35Ltr
1
15000
15000
... More
d. 50Ltr
1
20000
20000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements