Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date24 Dec 2024
Closing Date3 Jan 2025
Tender Amount₹ 17,50,000
Costs
EMD
₹ 35,000Document Cost
₹ 600Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_268863_1Bid Award Id
ViewTender No
e-NIT No. 30 of 2024-25 dated 24-12-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
1
6
6.95
... More
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
1
1458
1458.45
... More
Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 mtrs( stacks of cleaned bricks shall be measured) from brick work in cement mortar.
1
4
4.94
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below
1
285
285.25
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area beyond 3 sqm.
1
390
390.5
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below
1
110
110.05
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area beyond 3 sqm.
1
145
145.75
... More
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.
1
83
83.45
... More
Demolishing mud phaska in terracing and disposal of material within 50 meters lead
1
647
647.15
... More
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
1
38
38.9
... More
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
1
441
441.4
... More
Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
1
991
991
... More
Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm)
1
1130
1130.85
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
1
4826
4826.5
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
5733
5733.6
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
6591
6591.25
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
... More
Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:
1
142
142
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
947
947.25
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
1
159
159.65
... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
1
718
718.2
... More
Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide
1
262
262.2
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
1
123
123.2
... More
STEEL WORK WELDED IN BUILT UP SECTIONS/FRAMED WORK, INCLUDING CUTTING, HOISTING, FIXING IN POSITION AND APPLYING A PRIMING COAT OF APPROVED STEEL PRIMER USING STRUCTURAL STEEL ETC. AS REQUIRED. IN STRINGERS, TREADS, LANDINGS ETC. OF STAIR CASES, INCLUDING USE OF CHEQUERED PLATE WHEREVER REQUIRED, ALL COMPLETE.
1
141
141.4
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1
138
138.2
... More
Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.
1
545
545.75
... More
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead.
1
51
51.45
... More
Old work (two or more coats)
1
17
17.75
... More
White washing with lime to give an even shade : Old work (one or more coats)
1
10
10.8
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
14
14.5
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
1
89
89.9
... More
Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 103 mm diameter pipes
1
88
88.6
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade , one or more coats on old work
1
86
86.75
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
1
327
327.85
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
... More
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 coarse sand)
1
283
283.8
... More
12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 coarse sand)
1
266
266.2
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
1
66
66.85
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1
98
98.75
... More
Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 115 mm diameter pipes
1
94
94.85
... More
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
1
131
131.85
... More
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
1
149
149.05
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick
1
138
138.1
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete : 2 mm thick
1
181
181.05
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
1
265
265.3
... More
P/F GI pipes complete with Gi fittings, including cutting and making good the walls etc. Internal work (Parkash Surya make) or equivalent 15mm dia nominal bore (medium)
1
360
360.55
... More
20mm dia nominal bore (medium)
1
431
431.2
... More
25mm dia nominal bore (medium)
1
529
529.7
... More
32mm dia nominal bore (medium)
1
634
634.65
... More
40 mm dia. nominal Bore (Medium)
1
768
768.5
... More
50 mm dia. nominal bore (Medium)
1
1182
1182.15
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (Parkash, Suyra Make) or equivalent (1) 15 mm dia. nominal bore (Medium)
1
206
206.5
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. 15 mm diameter pipe.
1
17
17
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. 20 mm diameter pipe.
1
20
20.2
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. 25 mm diameter pipe.
1
26
26.45
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. 32 mm diameter pipe.
1
31
31.5
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work. 40 mm diameter pipe.
1
37
37.2
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre
1
226
226.15
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
1
366
366.3
... More
150 mm dia Pipe
1
550
550
... More
P/F PVC pipe including /jointing with seal ring (Finolex/ Supreme) of pressure @ 5.5kg/sqcm 75mm dia plain bend
1
125
125
... More
75mm dia door bend
1
170
170
... More
75mm dia cowl
1
125
125
... More
110mm dia plain bend
1
240
240
... More
110mm dia door bend
1
250
250
... More
110mm dia door tee
1
290
290
... More
110mm dia tee junction
1
325
325
... More
Reducer Tee 110mm dia to 75mm dia
1
250
250
... More
cowl 110mm dia
1
125
125
... More
75mm dia Door tee
1
180
180
... More
150mm dia plain bend
1
450
450
... More
150mm dia door bend
1
530
530
... More
P/F PVC Floor trap of Finolex/ Supreme make
1
210
210
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
5493
5493.25
... More
Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required
1
5632
5632.25
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps.
1
3561
3561.9
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
1
3260
3260.85
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
1
1474
1474.15
... More
Providing and fixinground wash basin white vitrous china 450 mm dia complete (Hindware / Cera / Parryware make)
1
4000
4000
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.
1
1400
1400.05
... More
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
1
1163
1163.85
... More
pvc connection for flushing cistern, wash basin, sinks etc. 450mm long
1
120
120
... More
600mm long
1
150
150
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid.
1
673
673.6
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
1
14487
14487
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
1
21554
21554
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
1
5538
5538.75
... More
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
1
2303
2303.9
... More
P/F of China ware fittings (Superior type as per the make and design specified by the Engineer in charge). Wash Basin china ware (white )600x470x160mm
1
1020
1020
... More
wash basin china ware size 565x435x215mm
1
795
795
... More
Round wash basin Counter top size 545x545x185mm
1
6150
6150
... More
Extended wall hung seat complete with cistern size 365x643x770mm
1
9450
9450
... More
EWC with soft clearing seat cover size 360x360x680x755, S trap complete with
1
8700
8700
... More
EWC with normal clearing seat cover size 350x480x390
1
4200
4200
... More
P/F of China ware urinal partition.
1
3500
3500
... More
P/F of china ware urinal size 355x345x535mm
1
4450
4450
... More
C.P. BRASS FITTINGS Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
1
583
583.25
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
1
712
712.6
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
1
704
704.8
... More
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
1
690
690.3
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
1
582
582.35
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
2072
2072.1
... More
P/L Stone slab with table rubbed edges rounded and polished of size 75x50cm deep fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedded the stone in the chase and epoxy grout or with cement concrete 1:2:4 white agaria marble stone.
1
3300
3300
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe- 32 mm dia
1
137
137.4
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe - 32 mm dia
1
128
128.05
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
1
704
704.8
... More
Short nose bib cock
1
583
583.21
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
1
712
712.6
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
1
582
582.35
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
2072
2072.1
... More
Mixer for bathing (wall mixer)
1
3100
3100
... More
swan neck left/right tap
1
1750
1750
... More
CP Gratings 4"
1
50
50
... More
CP Gratings 6"
1
150
150
... More
soap dish
1
650
650
... More
C.P Towel rod 2'-0''
1
1350
1350
... More
C.P Towel rod 1'-6'' (20mm dia.)
1
1170
1170
... More
Towel ring 200mm dia
1
990
990
... More
waste coupling for wash basin 32mm dia.
1
480
480
... More
waste coupling for laboratory sink 50mm dia.
1
650
650
... More
shower with arm
1
1500
1500
... More
concealed stop cock with head.
1
1400
1400
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
1
412
412.1
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board- 610x460mm bowl depth 200mm
1
3723
3723.55
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board- 470x420mm bowl depth 178mm
1
3308
3308.8
... More
Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
1
835
835.6
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1
8
8.75
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
11533
11533.5
... More
Extra for depth for manholes Size 90x80 cm -With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
9059
9059.2
... More
Demolishing W.C platform cement concrete and disposal of unserviceable material upto dumping site at ground floor road side (maximum 3'0''x4'0''x1'6''
1
500
500
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
481
481.95
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion. Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
514
514.3
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.). For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
574
574.45
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.). For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.). Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
607
607.4
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
11533
11533.5
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.
1
933
933.35
... More
Repair to aluminium door shutter incl. refixing/ fixtures/ ACP sheets rubber gasket / aluminium beeding etc complete (cost of ACP sheet paid separately.)
1
60
60
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item.). With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness.
1
2407
2407.05
... More
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
456
456.4
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm
1
298
298.75
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm
1
251
251.95
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200 x 10 mm
1
95
95.32
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm
1
83
83.8
... More
100 x 10 mm
1
63
63.31
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm
1
68
68
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm
1
60
60
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 75 mm
1
51
51.95
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,
1
10401
10401.5
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class teak wood 30mm
1
3933
3933.4
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class teak wood 35mm
1
4432
4432.4
... More
Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows fixing with butt hinges of required size with necessary screws , excluding panelling which will be [aid for separately , all complete as per direction of Engineer-in-charge(Note:-Butt hinges and necessary screws shall be paid separately )30mm thick second class Deodar wood
1
3284
3284.7
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class deodar wood 35mm
1
3665
3665.8
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle Board 12mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
1
1367
1367.25
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 35mm
1
4256
4256
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 30mm
1
3788
3788.5
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50 x 12 mm
1
214
214.75
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 50 x 20 mm
1
275
275.05
... More
GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient)
1
2026
2026.35
... More
12.5mm thick square edge PVC laminated gypsum .Tile of size 595x595mm made of Gypsum plasterboard manufactured from natural gypsum as per I.S 2095 part i and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completetly sealed unit.
1
2006
2006.35
... More
12.5MM thick fully perforated Gypsum board tile made from plaster board having glass fibre conforming to I.S 2095 part I of size 595x595mm having perforation of 9.7x9.7mm at 19.4mm c/c with centre borders of 48mm and the side borders of 30mm backed with non woven tissue on the back side having an NRC of 0.79 with 50mm resin bonded glass wool backing.
1
1303
1303.9
... More
8mm thick fully perforated calcium silicate board made with calcareous and silicaeous material reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225kg/sqcm of size 595x595mm
1
1964
1964.2
... More
Providing of water proofing treatment to the roof slabs, W.C and bathrooms by Austrian technology using diamond shield and fibre mesh covered with two or more coats of specified chemical or using FOSROC, SIKA OF BASF water proofing chemical. A primer coat of specified chemical to be applied before fixing/ laying of fibre mesh complete.
1
70
70
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1
485
485.1
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
1
556
556.2
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate.
1
510
510.25
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
1
562
562.15
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm
1
1448
1448.9
... More
P/F Anti skid premium tiles on floor (thickness to be specified by the manufacturer) of IST quality of RAK, KAJARIA make in any color laid on 20mm thick bed of cement mortar 1:4 incl. pointing the joints with white cement and matching pigment etc. complete 300x300mm
1
115
115
... More
600x600mm
1
160
160
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
1
1395
1395.1
... More
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.
1
2186
2186.3
... More
Disposal of unserviceable dismentled material / waste mulba by mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)
1
2000
2000
... More
Grinding and polishing old terrazo flooring / skirting with floor polish of specifed brand for smooth finishing incl. disposal of waste material of grinding / polishing from site of work to dumping site at ground floor.
1
12
12
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 16mm
1
4550
4550.35
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm
1
4655
4655.7
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work
1
381
381.7
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
1
246
246.2
... More
P/F M.S wire gauge to old wood shutters/ steel shutters incl. removing and fitting of shutters complete.
1
40
40
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding
1
212
212
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc
1
231
231
... More
P/F PVC panelling in walls 6 to 10mm thick incl. all fittings and fixtures complete (wall affair or any equivalent make.)
1
120
120
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore
1
453
453.5
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore
1
524
524.85
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore
1
569
569.45
... More
Providing 11/4'' wooden moulded beeding to the ceiling incl. cost of nails, wasteage etc complete.
1
65
65
... More
P/F 1'' wooden gola to the ceiling incl. cost of nails, wasteage etc complete.
1
50
50
... More
Providing fency knoob to the cupboard shutters complete job.
1
110
110
... More
P/F 19mm thick wooden board shutters to cabinet incl M.S hinges and screws complete.
1
140
140
... More
P/F hand held jet sprayer
1
1350
1350
... More
P/F PVC bend 40mm dia (superior)
1
70
70
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood
1
142085
142085.65
... More
Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.
1
43
43.65
... More
Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
1
553
553.8
... More
Aluminium sheet for doors 1mm thick
1
50
50
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
1
156
156.95
... More
CPVC PIPES AND FITTINGS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes.
1
419
419.75
... More
CPVC PIPES AND FITTINGS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes.
1
492
492.35
... More
CPVC PIPES AND FITTINGS: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes.
1
602
602.4
... More
P/F 6mm water proof ply complete job
1
85
85
... More
P/F 12mm water proof ply complete job
1
150
150
... More
P/F 19mm water proof ply complete job.
1
225
225
... More
P/F of 1.0mm thick sunmica incl. cutting, wastage, nails, carriage etc. complete item (virgo, Amulya or equivalent make).
1
110
110
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore
1
691
691.7
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore
1
750
750
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore
1
834
834.6
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore
1
986
986.15
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 12.1.6 0.50 mm thick with zinc coating not less than 275 gram/m2
1
974
974.05
... More
Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc. 0.80 mm/0.63 mm/0.50 mm thic
1
72
72.75
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.22.1 With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws
1
2078
2078.2
... More
Supply and installation of Armstrong Medintech plus PUR homogeneous vinyl sheet flooring. Inc 2m wide and overall thickness of 2mm. The thickness of wear layer would be 2mm. The product should be homogeneous and single layered.
1
220
220
... More
P/F of brass phase for taps/ pillar cocks (heavy duty)
1
60
60
... More
Providing and fixing of door mats of standard make
1
135
135
... More
P/F cupboards incl. frame of 2nd class deodar wood 19mm thick particle board with decorative shutters incl. internal box of 19mm particle board complete with painting with all fittings and fixtures.
1
1050
1050
... More
P/F wallpaper of required color, shade and design of standard make as directed by the Engineer in charge.
1
110
110
... More
P/F acrylic name plate (writing on both sides)
1
700
700
... More
Supply of Labour (Mazdoor) for various day to day works as per directions of engineer in charge
1
553
553
... More
Supply of carpentar for various day to day works as per directions of Engineer in charge.
1
733
733
... More
Supply of Plumber for various day to day works as per directions of Engineer in charge.
1
733
733
... More
Supply of SWEEPER for various day to day works as per directions of engineer in charge
1
553
553
... More
Supply of Technican
1
806
806
... More
Supply of masson 1st class
1
806
806
... More
Supply of welder
1
806
806
... More
Supply of portable welding machine and for repair to various steel works incl. carriage.
1
750
750
... More
Supply of portable generator set incl. carriage
1
1400
1400
... More
Cleaning of PVC overhead water tanks by engaging Machines as per directions of engineer in charge
1
1
1
... More
P/F of Multilocks to cup boards (Godrej)
1
300
300
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
1
1628
1628
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
1
3305
3305
... More
Providing and fixing ball bearing for rolling shutters.
1
531
531.55
... More
P/F of PVC sheet (2mm thick)
1
45
45
... More
P/F of 19mm thick prelaminated board in panelling over wooden frame including removing of old damaged panelling and anti termiting the same (complete job) laminated 8mm thick AC-4 water resistant.
1
200
200
... More
P/F painting wire gauge shutters comprising as per window frame of built up MS sections 12mmx50mm rectangular tube with wire gauge shutter made of Z sections including hinges, riveted with frame of 20mmx3mm flat iron complete job (sample window available at High Court building) including priming and painting as per directions of Engineer in charge.
1
700
700
... More
P/F wooden profile Grade A to wooden flooring of specified brand as per the direction of engineer in charge.
1
140
140
... More
Grinding and polishing old kota stone/ chips flooring surface with floor polish of specified brand.
1
22
22
... More
Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 119 mm diameter pipes
1
119
119.2
... More
Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 120 mm diameter pipes
1
78
78.95
... More
P/F polycarbonate sheet including wasteage of 0.2mm thick (50 micron) complete job.
1
110
110
... More
P/F of polycarbonate sheet including wasteage of 10mm thick (50 micron) complete job.
1
240
240
... More
PF of UV stabilised fibre glass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated J or L hooks, bolts and nuts 8mm dia G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheet shall be manufactured out of 2400 TEX pannel rovings incorporating minimum 0.3% ultra violet stablizer in resin system under approximately 2400 psl and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat.
1
1003
1003.65
... More
Providing and fixing Brass Name Plate written on both side of Hon'ble Justices. (complete) letters on Both sides
1
8600
8600
... More
P/F of pre laminated board partition fixed on bothsides fixed over wooden frame of Ist class kail wood complete job including painting of cupboards etc.
1
320
320
... More
Providing and Laying 80mm thick factory made antiskid, anti glazed PCC interlocking paver blocks of M-40 design mix as per IS: 15658: 2006 (Avg. compressive strength of 8 paver blocks shall be minimum 47.2 N/mm2 minimum thickness of wearing layer is 6mm, max abrasion resistance 2mm, maximum water absorption of 3 units is 6% by mass) made by high quality paver blocks making machine with high level of compaction and vibration and of approved size
1
1150
1150
... More
CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
1
1229
1229.1
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
1
1595
1595.1
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
1
1136
1136.25
... More
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement.
1
1150
1150.75
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
1
1107
1107.65
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm
1
1490
1490.05
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mmthick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. Area = 136.63 m2
1
875
875.95
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm
1
253
253.7
... More
providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways of light traffic parking etc. of required strength, thickness and size/shape, made of table vibratory methood using PU mould, laid in required color and pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compacting by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all asper the directions of EIC. 80mm thick CC paver block of M-30 grade with approved color design and pattern
1
929
929.85
... More
P/F of PVC covers for PVC water storage tanks
1
150
150
... More
P/F of blind for windows incl. all fixtures and fittings and necessary arrangements etc complete job (superior quality) vertical blind
1
2100
2100
... More
Roller blind
1
2400
2400
... More
Zebra blind
1
3300
3300
... More
Repairs to existing blinds
1
60
60
... More
P/F of curtains of standard size incl. stiching rings etc. complete job (superior quality).
1
1200
1200
... More
P/F flex board complete with hollow section M.S pipe frame work complete job
1
100
100
... More
Butting/ grinding of stainless steel railing by way of buffing machine.
1
75
75
... More
P/F of Honour board made of wooden board / Ply/ acrylic sheet incl. writing with stickers.
1
550
550
... More
P/F of S/S side steel brackets
1
70
70
... More
P/F SS side finners
1
75
75
... More
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0
1
1063
1063.8
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 75 mm diametre
1
226
226.15
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre
1
366
366.3
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete: 40 mm
1
422
422.95
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete: 50 mm
1
436
436.35
... More
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm
1
1308
1308.35
... More
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 12 mm mild steel U beading
1
827
827.4
... More
Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm
1
41
41.8
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper
1
63
63.45
... More
P/f magnetic catcher of approved quality in cupboard/ wardrobe shutter including fixing with necessary screws etc complete. Triple strip (vertical type)
1
40
40
... More
P/F of telescopic channel 16'' complete set with necessary screws/ arrangements (Godrej)
1
500
500
... More
P/F door seal with necessary screws etc complete.
1
150
150
... More
P/F of Door lock handle
1
400
400
... More
P/F of ACP sheet cutting, wasteage incl. necessary nails etc. complete (Bettech/VIT/ interia) make
1
115
115
... More
P/F of SS curtain rod pipe with side brackets and finners complete.
1
175
175
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia.
1
413
413.95
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25 mm dia.
1
534
534.35
... More
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats
1
80
80.5
... More
P/F of 25mm size brass letters for Honour board with adhesive etc. incl engraving, painting etc complete
1
3060
3060
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) for plate form cutting in foundation trenches depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth lead up to 50m and lift up to 1.5m. in all kinds of soil. For Approaches.
1
187
187.3
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth in all kinds of soil.
1
479
479.3
... More
Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures
1
1677
1677.7
... More
French spirit polishing, Two or more coats on new works including a coat of wood filler
1
380
380.85
... More
Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work
1
157
157.25
... More
Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 120 mm diameter pipes
1
78
78.95
... More
Renewal of old putty of glass panes (length)
1
14
14.75
... More
Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 110 mm diameter pipes
1
3
3.2
... More
Repair to sensor door glass including sensor
1
250
250
... More
Providing and fixing of sun board including writing the matter complete job
1
120
120
... More
Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete.
1
187
187.8
... More
Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete
1
188
188.8
... More
Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete.
1
94
94.15
... More
Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete.
1
154
154.35
... More
Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete
1
161
161.05
... More
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.
1
64
64.35
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
1
-
0.4
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm
1
51
51.6
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm
1
41
41.3
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 75x47x1.70 mm
1
33
33.3
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 50x37x1.50 mm
1
17
17.1
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60mm thickness, including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C. Fixing with carbon steel galvanized dash fastener of required dia and size (to be paid for separately).
1
474
474
... More
washing of Dirty curtains including removing from the existing rings and re fixing the same after ironing all complete
1
100
100
... More
Providing and fixing WPC pannels as per the direction of engineer incharge .
1
360
360
... More
Providing and fixing of CP pillar cock on wash basins
1
750
750
... More
Providing and fixing toilet paper holder - C.P. brass
1
1011
1011.75
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).15 mm nominal bore
1
264
264.25
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).20 mm nominal bore
1
288
288.3
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).25 mm nominal bore
1
320
320.4
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).40 mm nominal bore
1
420
420.75
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:27712.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)
1
1350
1350.65
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
1
266
266.3
... More
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : One coat
1
54
54.5
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
18
18.7
... More
Supplying and stacking of good earth at site including royalty (earth
measured in stacks will be reduced by 20% for payment)
1
281
281.3
... More
Spreading of sludge, dump manure or/and good earth in required
thickness as per directions of officer in-charge (cost of sludge, dump
manure or/and good earth to be paid separately)
1
53
53.55
... More
Carriage of material by mechanical transport incl. loading / unloading, stacking at site of work:- Stone Aggregate above 40mm nominal size (average lead 15.00 kms)
1
374
374.49
... More
Carriage of material by mechanical transport incl. loading / unloading, stacking at site of work:- Stone Aggregate below 40mm nominal size (average lead 15.00 kms)
1
344
344.49
... More
Sand (average lead 15.00 kms)
1
344
344.49
... More
Bricks (average lead 15.00 kms)
1
918
918.65
... More
Good Earth (average lead 15.00 kms)
1
430
430.62
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements