Public Works Department Tender

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level :Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately. Powder coated aluminum (minimum thickness of powder coated 50 microns).

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns).

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.): With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. : Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. :100 mm

Providing and fixing aluminum butt hinges anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 94x45x3.2 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) :

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 20 mm dia. nominal bore

Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design. : All around PVC pipe 100 mm diameter PVC pipe

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes110 mm diametre.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 40mm.

Providing and fixing of following size of PVC (Prince make or equivalent) Fitting ISI Marked.

110mm dia Plain Bend

110mm dia Plain Tee

110mm dia Door Bend

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereverrequired:-White Vitreous China Wash basin size 630x450 mm with a 15 mm CP Brass single hole basin mixer.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve of approved brand as per the directions of Engineer-in-charge.

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP waste Coupling of approved brand as oper directions of Engineer-in-charge

Providing and fixing PVC Waste pipe-3/4" of approved brand as oper directions of Engineer-in-charge

Providing and fixing CP Soap case.

Providing and fixing of CP Grating.

Providing and fixing 15mm dia 2" long CP nipples.

Providing and fixing PVC connection pipe upto 18" long.

Providing and fixing CP Towel Ring

Providing and fixing of Steel Shelf of Superior quality

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Circular shape 450 mm dia

Providing and fixing CP Cup

Providing and fixing Blinds for windows including all fixtures and fittings and necessary arrangements etc. complete job. Printed Zebra Blinds (superior quality) including cost of providing and fixing of Roller asembly as approved by Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead : For thickness of tiles 10 mm to 25 mm.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge 1:3:6 or richer mix (i/c equivalent design mix).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing Grinder with operator for Removing dry or oil bound distemper, water proofing cement paint/primer from walls and the like including scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. : 2 mm thick

Finishing walls with acrylic smooth paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of cement primer applied @ 2.20kg/10sqm). (Brand : Nerolac Excel/Berger Champ/Asian Apex or equivalent.)

Engaging Labour for shifting of furniture and furnishing items before start of work and re-fixing after completion of work and other emergent kind of works.

Providing & fixing in position HDF Base wooden flooring with planks of sizes 8 mm thick, 1200 mm length (minimum) and 190 mm wide(minimum), in approved colour, texture and finish. The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface.The HDF wooden planks shall have minimum density of 900-950 Kg/m3. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.(Make: Green Panel/ Action Tesa or Equivalent Brand as Approved By Engineer In Charge.

Providing and fixing of 12mm WPC board on walls over 18mm thick WPC Framing with necessary screws complete job. Of appeoved brand and manufacture by EIC.

Providing and fixing Charcoal louvers Panels-10 mm thick of superior quality approved by engineer-in-chatrge for wall panelling made from a mixture of Charcoal and polystyrene proportionately including necessary screws,nuts all complete including wastage etc.

Providing and fixing of charcoal sheet(4 mm ) thick including TEE Profile with necessary arrangements of approved brand and manufacture by EIC

Providing and fixing UV PVC Sheet Wall panelling of approved design and quality including necessary adhesive(of fevicol brand or equivalent) screws,nuts etc. all complete including wastage etc. : UV PVC (polyvinyl chloride) Marble sheets designed to mimic the appearance of natural marble. Manufactured by UV-cured printing process to create high-resolution marble patterns and textures on the surface of PVC sheets-3 MM thick (Heavy Duty) including Golden strips and golden nails as per requirement and as per the design approved by engineer-in-charge.

Engaging Mason for minor Repair works and making good the walls.

Labour with mason

Engaging Plumber for removing of old damaged fittings of toilets including minor repairs of fittings and fixtures.

Engaging Carpenter for Repairing of existing Teak wood wall panelling including cost of material like wood filler,nails,teak wood small pieces etc. complete job.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). : 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Providing and fixing 6mm thick PVC hollow panels of superior quality approved texture for plain lining/cladding with necessary screws in true vertical level fixed on Grooves. PVC panels to be interlocked with tongue & grooved joints with each other panel to form rigid and joint less including required cutting /making, opening for services etc. All complete as per specifications, drawings and as directed by Engineer-in-charge.

Engaging Labour for cleaning of Tile flooring including cost of acid/detergent etc., removing of furniture and re-fixing of same after completion of work. 02 no. for 04 days.

Melamine polishing on wood work (one or more coats). Dy. Director Planning

Disposal of mulba beyond municipal limits(10 km avg. lead).

Carriage of material by mechanical transportation including loading ,unloading and stacking complete for an average lead of 10 kms

Aggregate below 40mm