Public Works Department Tender

Random Rubble masonry with hard stone from Quarry in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Dry random rubble masonry with hard stone from Quarry in foundation and plinth with bond stone, incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and applying 2mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge incl cost of Balusters, Newel and railing incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make like Cerra, Hindware or equivalent make, including painting of fittings and brackets, cutting and making good the walls wherever required with White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer of make Jaquar, Cerra, Parko incl Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings incl all costs and carriages complete

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 liter white P.V.C automatic flushing cistern incl all costs and carriages complete

Providing and fixing 50 liter hot water geysers complete job of approved bands like Racold, Kohler, Crompton or equivalent incl all costs and carriages complete

Providing and fixing 15 mm nominal bore C.P. wall Mixer of standard design and of approved make conforming to IS : 8931,like jaquar etc incl all costs and carriages complete.

P/F mirror of superior glass of required shape and size with plastic moulded frame of approved make and shade with 6mm hard board backing rectangular in shape 453x357 mm incl all costs and carriages complete.

P/F 15 mm nominal board CP brass long nose bib cock of approved quality confirmed to IS standard and weight not less than 810 gram ( Jacquar, cera hindware or equivalent brand) incl all costs and carriages complete.

P/F PTMT Towel ring trapezoidal in shape 215mm long 200mm wide with a min distance 37mm from wall face with concealed fitting arrangements of approved quality and color weighing not less than 88 gram incl all costs and carriages complete.

Renewing glass panes, with wooden fillets wherever necessary with Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) incl all costs and carriages

Providing and fixing 30mm thick panelled or panelled and glazed shutters with 2nd class Kail Wood for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling of 12mm thick Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked all complete as per direction of Engineer-in-charge incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Flooring with marble stone with 18mm Raj Nagar plain marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. all costs and carriages upto the site of work complete incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge For fixed portion with Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) incl cost of Aluminium butt Hinges, T bolts Handles and conceiled locks complete job incl all costs and carriages

Providing and fixing 4mm thick Aluminium Composite panels to Aluminium Partitions (Alstone) with rubber gasket and aluminium beading incl all costs and carriages of all materials involved complete

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) incl all costs and carriages

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incl all costs and carriages

Supply of Labour and materials for repairing the leakages of 2 No bathrooms by way of locating the source of leakages by manual inspection incl dismantling, repairing of damaged areas, installing new PP-R Pipes/fittings and soil waste PVC pipes/fittings of required dia, cutting, jointing and securly fitting the pipes to prevent future leakages and testing the same with dye test. The item includes application of cement plaster to repair and smoothen walls or floors after the repairs with application of water proofing treatment to the floor/walls and ensuring fixing of Tiles on walls (whereever required) and floor (Full bathroom Area), incl levelling, adhesive application and grouting all complete as per the directions of Engineer In charge