Public Works Department Tender

Random Rubble masonry with hard stone from nallah in foundation and plinth including leveling up with cement concrete1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate20mm nominal size) at plinth level and curing complete with cement mortar 1:6

Dry Random Rubble Masonry in foundation and plinth without bond stone. Total Masonry

Hand Packing stone filling behind R/wall including supply of stone

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth andstring courses etc

Providing and Errecting a "W" metal Beam Crash Barrier comprising of 3mm thick corrugated steel metal beam rail 70cm above ground level fixed on ISMC series channel vertical post 150x75x5mm spaced 2m C/C 1.8m high, 1.1m below ground / road level, all steel parts and Fitments to be galvanizsed by hot dip process, all fittings to conform to IS 1367 and IS 1364 metal berm rail to be fixed on the vertical post with their spacer of Channel section 150x75x5mm, 330mm long complete as per clause 811.1

Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.A. Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm

Providing and fixing post delineators made of ABS round body fitted with 2nos. 100mm dia high reflective and reflectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti-rust and anti-theft steel to be installed as per direction of Engineer-in-charge.

Carriage of Sand for Avg Distance of 10 km by MT

Carriage of Aggregate for Avg Distance of 25 km by MT

Carriage of Boulders 10 km BY MT