Public Works Department Tender

P/F of film frost of approved brand and manufacture incl all charges complete job

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing of glass panes with wooden fillets of required size wherever necessary.Glass panes 5mm thick weighing 12.5 Kg / sqm.

Construction computer tables with necessary drawers, shutters made out of 19mm thick plyboard including cost of all hardware fittings as required. All exposed surfaces to be finished with dulmica fixed with adhesive etc all complete. The height of the table table shall be as per site conditions and architectural drawings and width of the table is 600mm (payments shall be made on top surface only)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)

Providing and fixing of flooring AC3 using HDF solid core planks of specified thickness approved quality and color with tongued and grooved jointing including cost of thermo cot and other accessories complete. (to be approved by EIC) 8mm thick

Providing and fixing specified wood frame work consisting of battens of specified size fixed with rawl plug and drilling necessary holes for rawl plug etc, including priming coat complete: KD Wood

Providing and fixing of ply wood including cost of nails adhesive etc. complete at all places.19 mm thick

Providing and fixing of wooden paneling/ lining of 12mm (net thickness) imported wood including providing and fixing of ground frame work of 18mm thick plywood jambs including cost of screws, wooden plugs, and two or more coats of Touchwood etc. complete as per directions of EIC

Providing and fixing of 1mm thick Dulmica/ sun mica sheeting of colour and pattern as per EIC including cost of nails and adhesive complete.

Providing ,Laying ,connecting ,Testing and commissioning of wiring for Machine points with 2 x 2.5 mm sq. mm (P+N+E) FR PVC insulated Multistrand copper conductor wires of standard make dully ISI make (Like Anchor /Finolex /Polycab /Paramount /Paraflex /KEI /Eq.make ) and 3rd pin of socket to be earthed with 1 x 2.5 mm sq. copper conductor laid through PVC conduit / channel (excl. cost of conduit /channel ) & Provided and fitted with 2 No's of 6 amp one way switch and 3 No's of 10 amp 5-pin socket ISI make fitted on modular series fixed in walls incl. refacing of walls complete.

Providing ,Laying ,connecting ,Testing and commissioning of wiring for Heating points with 2 x 4 mm sq. mm (P+N+E) FR PVC insulated Multistrand copper conductor wires of standard make dully ISI make (Like Anchor /Finolex /Polycab /Paramount /Paraflex /KEI /Eq.make ) and 3rd pin of socket to be earthed with 4.0 mm sq. copper conductor laid through PVC conduit / channel (excl. cost of conduit /channel ) & Provided and fitted with with 16 amp one way switch and 16 amp 5-pin socket ISI make fitted on modular series sheet fixed in walls incl. refacing of walls complete.

Providing ,Laying ,connecting ,Testing and commissioning of wiring for Lighting points /fan points /Exhaust fan points /call bell points with 2 x 1.5 mm sq.mm FR PVC insulated multistranded copper conductor wires of standard make dully ISI make (Like Anchor /Finolex /Polycab /Paramount /Paraflex /KEI /Eq.make ) laid through PVC conduit / Channel with (excl. cost of conduit /channel ) & Provided and fitted with 6 amp switch one way ISI make fitted on modular series sheet fixed fixed in walls incl. refacing of walls complete.

Supply ,installation ,Testing and Commissioning of 20-22 Watts ,4 ft long LED tube light fitting having PVC Body of standard make dully isi marked ,incl ceiling rose and 2-core transparent wire for connections complete job.

Supply, Installation, Testing and commissioning of 2 ft x 2 ft 32-34 watt LED surface/recess mounted Down lighter panels of Standard make dully Isi marke incl making of necessary Connections.

Supply and fixing of 8- way modular PVC Box of reputed make

Supply and fixing of 4- way modular PVC Box of reputed make

Supply , Installation ,testing and commissioning of Following MCB /MCCB's of standard make ,isi marked incl making of necessary connections. (Legrend /L&T /ABB/Hugger /Simens / Indo Asian /Havells make (Adjustable type thermo magnetics ) 6-10-16-20-32 Amps Single Pole MCB (5KA)

Supply , Installation ,testing and commissioning of Following MCB /MCCB's of standard make ,isi marked incl making of necessary connections. (Legrend /L&T /ABB/Hugger /Simens / Indo Asian /Havells make (Adjustable type thermo magnetics ) 32-40 Amp (10KA) DP MCB

Supply ,installation ,testing and commissioning of Double door MCB Box fabricated out of sheet steel dully company coated paint of standard make dully isi marked incl fixing on walls complete job

Supply , Laying and connecting ,testing and commissioning of following FR PVC Insulated Multi Strand copper wire of standard make dully isi marked 6 Sq.mm

Providing and fixing of PVC/Acrylic Name Plates, Signages etc of various sizes as per the directions of engineer incharge

Engagement of Labour

Supplying and Providing Mid back chair having metallic frame adjustable lumbar support having arm rest, ergonomic, rolling,swivel feature with adjustable hydraulic height, wheel base with 5 castor wheels,cushion padded seat and back made of mesh fabric as approved by EIC.