Public Works Department Tender

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforcement of R.C.C work including straightening, cutting, bending, placing in position and binding all complete withTMT Bars.

Centering and Shuttering including strutting and propping etc and including removal of same.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Construction of concrete cable trench from equipment shed upto the nearby wall of hospital building with proper heavy duty hinged manhole covers fabricated out of MS angle and flats for laying of cables. The job also includes proper illumination of shed with fans, electrical wiring and allied works

Installation, testing & commissioning of electro-mechanical equipments Installation, testing & commissioning of electro-mechanical equipments of Digital X-Ray machines arranged by hospital authorities. including allied items/works. The job includes laying of cable in the cable trench and fixing on walls with the help of fixtures. The job also includes providing of hooks (fixtures) fabricated out MS angle and flat and fixing of the same on walls with the help of SS hilti bolts, making all electric connections of cable with electromechanical equipments at the supply and receiving end. The job also includes providing and fitting of thimbles, insulation tape, fasteners, and allied items as per site requirements for completing the installation. The job also includes arrangement of crane/tools and tackles and manual labour for proper installation, testing and commissioning of the equipments