Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Oct 2024
Closing Date11 Nov 2024
Tender Amount₹ 3,83,70,000
Costs
EMD
₹ 7,67,400Document Cost
₹ 5,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_261472_1Bid Award Id
ViewTender No
NIT_NO_59_MDB of 2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://jkpwdrb.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat.
67.38
5202
350571.4
6) CAST-IN-STU DESIGN MIX M25: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix,incluyding pumping of concrete to site laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportiond as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note: - Cement in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable seperately all works Below Plinth Levl / Above Plinth Level upto level V (AGL/BGL)..
335.28
8119
2722339.49
Providing and laying in position cement concrete of specified grade M-10 excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
55.39
5733
317584.1
Centring and shuttering including strutting, propping etc and removal of form work:
-
-
-
Footings foundations, bases of column
506.4
286
145007.64
Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc.
208
628
130821.6
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
522.99
577
302052.87
Suspended floors, roofs, landings, balconies and access platforms.
231.63
718
166353.08
Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.
73517.72
123
9057383.1
Supplying filling of watering compacting and dressing nallah muck under floors including all carriage lead lifts complete.
535.5
1000
535500
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
182.83
218
39930.07
Designing, fabricating, testing, installing and fixing in position Curtain Wall with
High Pressure Laminate Cladding, with open/closed grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:Providing, fabricating and supplying and fixing panels ofHigh Pressure Laminate cladding in any shape and colour as approved by consultant having warranty of not less than 10 years.
769.5
5219
4016289.83
Providing and laying autoclaved aerated cement blocks masonry with thickness as specified by consultant thick AAC blocks in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 Cement : 4 coarse sand ) and curing complete. The rate includes providing and placing in position 2 nos. 6 mm dia M.S bars at every third course of masonry work incld. carriages
164.47
8800
1447336
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly einforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and ecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm &sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single toughned glass pane glazing bead of appropriate dimension. including fixed part if any as approved by consultant including Providing and fixing steel (white powder coated) handle with inbuilt lock for UPVC sliding window/ door with necessary screws etc.
62.42
10570
659779.4
Extra for providing and fixing of single glazing in UPVC windows, ventilators and partotions etc with 5mm thick toughened clear glass including providing EPDM gasket, silicone etc as per specifications, drawings and directions of Engineer in Charge.
62.42
1300
81146
Extra for providing and fixing of fly proof pleated wire mesh to upvc made of appropriate material foldable/sliding as per directions of engineer in charge
17.33
1300
22529
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Kiln seasoned and chemically treated hollock wood
1.1
74353
81788.8
Providing & fixing 35mm thk ISI marked Flush door shutters non decorative type solid core of block board construction with frame of first class hard wood all around, 20mm thick & well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces including bright finished ISI marked butt hinges with necessary screws.
26.4
3234
85382.88
12 mm cement plaster on in1:4(1 cement : 4 fine sand mortar) including scaffolding
1414
283
401293.2
12 mm cement plaster on in1:4(1 cement : 4 fine sand mortar)
202
283
57327.6
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) ceiling
231.63
241
55879.53
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick
1847.63
181
334512.51
Distempering with oil bound distemper of app brand and manufacture
1847.63
164
304119.08
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)etc complete job
92.92
64
6002.63
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works complete job (two coats)
172.8
53
9262.08
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works.
265.72
131
35035.18
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm)
808
185
149641.6
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50 mm thick with 20mm nominal size stone aggregate.
826.63
562
464687.24
Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
166.42
1229
204546.82
VITRIFIED FLOOR TILES
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
261.1
1395
364260.61
Providing and laying Marble stone flooring laid in required pattern in linear portion of the building all complete with 16 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge
55.6
3200
177928
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design
approved by Engineer-in-Charge.Marble Work
136.35
224
30576.49
Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer.including carriage
52340
138
7233388
Providing and Fixing of H.I rib profiled SMP Coated sheets of Approved Colour comprising 0.63mm thick class-3 sheets fixed to the supporting structure with 8mm dia GI, J/L hooks , GI limpet and bituminous felt washers, including SMP quoted plain ridges, valleys etc., all included, but excluding cost of supporting structure with all lead and lift including the cost of all material, labours, tools and plant and any other item that may require for the completeness of work as per the drawings, specification and as directed by the Engineer In-charge
1168
1400
1635200
Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building..With resin bonded rock wool with density 48 kg/cum
1168
606
708625.6
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26
mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board,all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum fire resistant board
conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks)
1168
1420
1659611.2
ANCHOR BOLTS: Providing and fixing bolts including nuts, washers complete job.
450
110
49500
Providing and fixing GI sheet with appropriate corrugations to pre painted with shade specified by consultant for soffits, gables etc
136.35
600
81810
Providing and fixing of plain galvanised iron eaves boarding of G.I Sheet of standard quality etc complete job
242.4
450
109080
Providing and fixing M.S. railing of required pattern with M.S. square or round tubes,flats etc including priming coat with approved steel primer all complete.
1296
156
203407.2
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, leveling and dressing and finishing the top smooth and curing complete
60.6
572
34711.68
Providing dash fasteners/ 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts,nuts and wooden plugs and embedding in cement concrete blocl 30x10x15cm in 1:3:6 mix.
115
207
23845.25
Providing and fixing of Hardware fittings (Alloy) as per approved samples
-
-
-
150 mm Handle
36
75
2700
150mm Tower bolts
36
80
2880
P&F approved quality bright finished brass 100mm mortise latch and lock/L Drop
13
90
1170
Providing and laying in position specified grades of reinforced cement concrete 1:1.5:3 in beams, slabs, walls(any thickness) including attached pillasters, buttresses, plinth and string courses, filets, columns, , stairs,pillars, piers, abutments, posts and struts etc. using 20mm thick crushed stone agg. Excluding the cost of centring, shuttering, finishing and reinforcement. All works upto the plinth level
5.36
9821
52645.12
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage.
20.35
6591
134131.94
Centring and shuttering including strutting, propping etc and removal of form work:
23.81
718
17100.34
P/L of dry rubble masonry with hard stone in foundation and plinth incl. all carriages involved
11.35
2793
31709.63
15 mm cement plaster on rough side of single or half brick wall in1:4(1 cement : 4 fine sand mortar)
51
327
16720.35
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete 25 mm thick with 20mm nominal size stone aggregate etc.complete job
14.14
409
5786.8
Brick with FPS bricks of class designation 75 in in cement mortar 1:6 (1 cement : 6 coarse sand) etc complete job.
9.28
7571
70273.45
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.
-
-
-
25 mm OD (SDR-7.4)
480
298
143088
40 mm OD (SDR-7.4)
300
512
153660
50 mm OD (SDR-7.4)
180
650
117126
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 , UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc
-
-
-
pipe 25mm
360
236
85194
PPR Union 25mm
2
353
706.5
PPR Union 40mm
2
500
1000
PPR Union 63mm
2
941
1883.9
PPR Adapter 25mm
2
250
500
PPR Adapter 40mm
2
450
900
PPR Adapter 63mm
2
550
1100
a) 25mm dia OD
-
-
-
BALL VALVE TANK 25MM
6
350
2100
b) 40 mm dia OD
-
-
-
BALL VALVE TANK 40MM
6
500
3000
b) 50 mm dia OD
-
-
-
BALL VALVE TANK 40MM
6
650
3900
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
5000
8
43750
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
4
583
2333
Providing and fixing 15 mm nominal bore C.P. brass angle valve f approved quality conforming to IS : 8931
20
582
11647
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level whiteP.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
3
5632
16897.2
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
2
5493
10986.5
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: Range of two urinal basins with 5 literwhite P.V.C automatic flushing cistern.
2
8619
17239.6
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
7
4841
33888.4
P/F 8mm dia C.P/S.S jet with flexible tube up to 1mter long with S.S triangular plate to European type W.C of approved quality and make.
5
412
2060
P/F of bevelled edge mirror of superior glass of approved quality complete fixed to PVC rawl plug with C P Brass screws complete job
11
1500
16500
P/F CP brass Double lever wall mixer with concealed shower of approved quality and make as approved by engineeh-in-charge 15mm dia
3
5000
15000
Providing and fixing CP Brass shower rose including arm and Flange with 15 or 20 mm inlet 100mm diameter
3
1500
4500
100mm
6
150
900
75mm
3
120
360
P/F soil, waste and vent pipes 1mm thick
-
-
-
a)PVC S&S pipe (150mm dia)
114
500
57000
a)PVC S&S pipe (100mm dia)
108
450
48600
c)PVC S&S pipe (75mm dia)
324
400
129600
d)PVC S&S pipe (50mm dia)
54
350
18900
PVC Cowell 50/75 mm dia
1
75
75
P/F PVC stay and clamps for PVC pipes
-
-
-
a) 100mm
30
85
2550
b) 75mm
30
25
750
P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes
-
-
-
a) 100mm
6
155
930
b) 75mm
10
145
1450
P/F plain bend of standard make
-
-
-
a) 100mm
20
155
3100
b) 75mm
37
145
5365
c)50mm
32
135
4320
P/F T Junction of standard make
-
-
-
a) 100mm
4
310
1240
b) 75mm
4
250
1000
P/F Door T junction of standard make
-
-
-
a)100mm
16
320
5120
a)75mm
20
320
6400
P/F PVC Reducer 100-50mm dia
2
250
500
P/F PVC Reducer 100-75mm dia
4
250
1000
PVC Collar 100mm
16
200
3200
PVC Collar 75mm
60
150
9000
Providing and fixing CP soap case of approved quality
10
500
5000
Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor
traps and floor drains with cement mortar, complete in all respects.
9
300
2700
Providing & fixing of 15mm dia PVC connection 600mm long including end
union and washers complete.
15
150
2250
Constructing brick masonry chamber for underground PIPES inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :.Inside dimensions as per requirement mm for single
pipe line with one or two inlets
12
7381
88576.8
P/F master trap
1
500
500
2 HP Motor of standard make including fixing
1
7500
7500
Hot water geyser of standard make 50 L
3
15000
45000
Earth work in excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.(SSR 2022)2.7.1
131.25
256
33711.56
P/L dry Stone Soling duly hand packed (Quarry) & consolidated with hand rammers incl.all carriage complete Job.
26.25
1000
26250
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage.
6.56
5202
34131.02
6) CAST-IN-STU DESIGN MIX M25: Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work,using cement content as per approved design mix,incluyding pumping of concrete to site laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportiond as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note: - Cement in this item is @ 340 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable seperately all works Below Plinth Levl / Above Plinth Level upto level V (AGL/BGL)..
78
8119
633328.8
Form work of steel plates not less than 3.0mm thick M.S. sheets of specified size stiffened with suitable structural frame work true to plane or Kit-ply plates of not less than 12mm thickness of specified sizes stiffened with a suitable timber frame work prop height up to desired height in foundation, plinth beams, all types of suspended floors, soffits of slabs, sloping areas, sides and soffits of beams ribs, columns posts, pedestals, ornamental projections or features desired heights and thickness complete including its removal for all RCC works from plinth to roof level.
205
628
128934.75
Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. TMT reinforcement of grade Fe-500D steel bars at all levels.
7087.5
123
873180
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
18
218
3931.2
Carriage of Sand For an average lead of 30kms
255
520
132686.7
Carriages of 20mm aggregate for an av. Lerad of 7 KM
470
232
109068.2
Carriage of Bricks for an av. Lead of 7 KM
4408
-
2688.88
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements