Public Works Department Tender

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl all leads, lifts costs and carriages incl head load if any complete job.

Providing & Laying of stone soling (duly hand packed) including watering dressing and ramming to achieve desired compaction incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing & laying in position cement concrete of specified grade including curing but excld. the cost of centring and shuttering all work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

50 mm thick Cement Concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg with 20mm n/s stone agg crushed) finished with a floating coat of neat cement incld. cement slurry but excld the cost of nosing of steps etc complete incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and Laying in position reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete (Thermo-mechanically treated bars) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Centring and shuttering of kit ply including proping, strutting & removal of the same for Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering of kit ply including proping, strutting & removal of the same Suspended floors, roofs, landings, balconies and access platforms.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing and panelling to be paid for separately.) For fixed portion and for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required with Powder coated aluminum (minimum thickness of powder coated 50 microns) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge with Pre-laminated particle board with decorative lamination on both sides incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Providing & fixing Anodised aluminium door / window fittings & fixtures of approved brand & standard manufacture ISI Marked including all leads, lifts cost & carriages of materials complete.

T-bolts (150x10mm)

T-bolts (100x10mm)

Handles (150mm)

AL Drop (300mm long)

Hanging Twin Rubber door Stopper

Butt hinges (100x75x4mm)

Wind Hooks (100mm)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job

Raised and cut pointing Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) incl all leads, lifts, loading, unloading, stacking, costs and carriages incl Head load if any upto site of work complete job