Public Works Department Tender

Wiring for 6Amp Plug with(P+N+E) 3 x 2.5 sq.mm FRLS PVC ,Polycab/Havells/Finolex/eqt make as approved by site engineer) Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit along with 1 x 2.5 sq.mm FRLS,Polycab/Havells/Finolex/eqt make as approved by site engineer) PVC Insulated copper conductor single core cable for loop Earthing of approved quality and ISI marked as required. with ,2No.6Amp .Modular switch(Anchor roma urban/legrand/SSK NV/equivalent make as approved by site engineer), 2, 2NO. Modular 6 Amp. 5-PIN Socket ,6-8 Module Modular gride plate, cover and suitable GI box etc (Excld. G.I Box laid earlier )as required (wire shall be approved before execution of wok by SITE In-charge Engineer strictly , connections etc. as required.) complete excluding cost of Conduits

Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. (wire shall be approved before execution of wok by SITE In-charge Engineer strictly .

2X 10sq. MM+ 1 X 10 sq. MM (Phase +N+E) Power point Sub main in One runFrom Main Panel to .Distribution boards(Polycab/Havells/Finolex/eqt make )

2 X 6SQ.MM + 1 X 6. SQ.MM [Phase +N+E) For Lighting/Inverter Sub main in one run from Main Panel to Distribution board(Polycab/Havells/Finolex/eqt make)

2 X 4SQ.MM + 1 X 4. SQ.MM [Phase +N+E) For AC, Sub main in one run from Main Panel to Distribution board(Polycab/Havells/Finolex/eqt make)

Supplying and fixing of 32Amp Rating ,240v, *C* Curve Miniature Circuit Breaker suitable for inductive load of following poles in existing DB . Complete with connections ,testing and commissioning etc as required Legrand /Havells or L&T /Schneider/ABB

SINGLE POLE (6-32Amp) Legrand /Havells or L&T /Schneider/ABB

Supplying and fixing following rating, Double pole, (P +N) 240 V, C* Curve Residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.

40Amp. Legrand /Havells or L&T /Schneider/ABB/Siemens

63Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens

Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( Havell/ legrand/ Shinider/SSK make) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)

6 way, Double door

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 2OMM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job

Supply installation testing and commissioning of 18 W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab . The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips or Havel's or Wipro or Jaguar or Surya or Veto or Panasonic or H.G or LUKEER make

Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Polycab/ LUKER USA

Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. Compt 225-250mm Shutter Typed

Description of work/items Supply, Installation .Testing and Commissioning of Main Controlling Panel ,fabricated out of heavy gauge sheet steel ,dully Painted with powder coated paint ,dust protected ,earth terminal fitted on epoxy cleats, volt meter & Ammeters with selector switch & CT Coil of required ratio with all necessary connections & inner wiring of panel on both heating and lighting circuits. The switches are connected with bus bars inside panel. The switch are adjustable type made of L&T / ABB / Legrand / Siemens make and change over switch should be of havells / L&T make (1) Normal income : 100 Amps TPN MCCB With adequate breaking capacity = 1 No 200 Amps TPN Al. Bus Bar Set = 1 set Digital Voltmeter ,Ammeter ,C.T Coils with Selector Switch & Phase indicator set (3) Inverter Incomer 100-125Amps DP MCB = 1 No 200 Amps Al. Bus Bar Set = 1 set Outgoing : (1 ) Normal outgoing for heating /Lighting etc load . 40-63 A DP MCBs=8= 8 No's as per site requirement.

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Supply, laying, Connecting and Commissioning of 70sq mm 3.5 core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havel’s /with required size of thimbles dully crimped with hydraulic crimping tool including p/ fixing of saddles /clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench

Supply, installation, testing& Commissioning of Bulk Head Fittings of Havel's RUGBY Model HAVEL'S BULK HEAD Fittings with 12watt LED Bulb of Philips or Havel’s /wipro make sample to be approved before installation

Supply, Laying, testing and commissioning of 25 mm dia. High class PVC conduit Heavy Duty, Unbreakable conduits to be laid in RCC Slab and downs in walls including cutting the wall and making good the same with 1:6 mix cement plaster in case of recessed conduit as required etc including cost of accessories like bends and ‘heavy Gauge Sheet Steel Deep Junction boxes of approved make .(Before laying of conduit the same to be approved by site Engineer) . Preferred make: Ravindera /Anchor/Alba/Polycab make.

Supply, Laying, testing and commissioning of 32 mm dia. High class PVC conduit Heavy Duty Unbreakable conduits to be laid in RCC Slab as sub-main pipes and downs in walls including cutting the wall and making good the same with 1:6 mix cement plaster in case of recessed conduit as required etc including cost of accessories like bends and ‘heavy Gauge Sheet Steel Deep Junction boxes of approved make .(Before laying of conduit the same to be approved by site Engineer) . Preferred make: Ravindera /Anchor/Alba/Polycab make.

Supplying, Installation, Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical fires

Supply installation testing and commissioning of Sine Wave Inverter Capacity 10KVA, Rated Power 8400 W,Supports Four battery,24 Month Warranty Safe for sensitive appliances with Sine wave out-put, Inverter should run heavy loads like AC, Geyser, Photocopiers, Auto over-load handling capacity Installation and maintenance friendly Offers high quality and reliable power back-up solution for office and homes ,MCB for protection from Input mains,Bypass switch for supplying output directly from grid in case of Home UPS fault.Noiseless Operations with the help of low harmonic distortion, Intuitive Display to easily understand status of mains availability, battery status, etc.Comprehensive protection against short-circuit, reverse polarity, battery over-charge, deep-discharge etc.Adaptive Battery charging control system technology (ABCC) ensures faster battery charging and enhances battery life by around 70%.Supports a wide battery range, i.e. Flat Plate, Tubular & VRLA (SMF).praffered make Luminous/ Microtek/Exide.the job also includes 2 No. trollies for housing 4 No battries and inverter.

Supplying, Installation, Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified

Providing and Laying of shock proof rubber mats of 2mm*1mm*12mm thick insize of standard make

Supply ,installation ,testing , &commissioning of 20 KVA 3 -Phase SERVO controlled VOLTAGE Stabilizer of Approved brand with following SPECIFICATIONS : (1). INPUT VOLTAGE: 156 Volt -450 Volts P-P (90V-260V N-P) (2). OUT PUT VOLTAGE : 400Volts+ 1%(230VAC) (3).Winding Material Insulation : 99.97% PURE COPPER WOUND FIBER GLASS (4). IN DOOR TYPE (5). COOLING :OIL 1S 335 (6).MICRO CONTROLLED TRUE RMS Based LCD display (7). Protections are Over Load COPPER wound of /Chinar / Electric Field /Alba /AE /Cosco etc ISI/1SO certified for smooth functioning/ constant voltage supply having Technical Specifications : Input voltage= 90-260 volts & output voltage=220 volts+ - 2% Buck Boost Transformer Copper wound 99.9% ,OIL Immersed COOLING OIL ,High cut/Low Cut /Time delay / Over Cut through Micro Control and Spike Protection including ,Carriages ,installation charges , testing & taxes complete job