Public Works Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Feb 2025
Closing Soon24 Feb 2025
Tender Amount₹ 11,35,57,000
Costs
EMD
₹ 22,71,140Document Cost
₹ 11,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDJK_271954_1Tender No
Nit-63of RNB/13237-13240/2024-25 dtd.06-02-2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1747
-
381544.8
... More
providing and Filing with Nallah muck including acrriage of amterial from source to site of work cmplete
905
-
814500
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level
169.77
-
883296.33
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. All works upto plinth level
502.38
-
4280352.96
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. All works above plinth level upto floor V level
537.3
-
5325234.03
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto plinth level level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
155.63
-
1025796.24
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
886.13
-
253743.33
... More
Suspended floors, roofs, landings, balconies and access platforms.
1998.12
-
1435049.78
... More
Edges of slabs and breaks in floors and walls, Under 20 cm wide
399.39
-
104720.06
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1582.09
-
913736.08
... More
Stairs (excluding landings) except spiral staircases.
19.03
-
16197.38
... More
Columns, pillars, piers, abutments, posts and struts
1188.56
-
882565.23
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
53759.4
-
7429549.08
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
160425.2
-
19764384.64
... More
Carriage of sand / bajree through Mechanical transport. Avg lead 8km
1842.8
-
456498.42
... More
B. ARCHITECTURAL
-
-
-
... More
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand)
617.15
-
5571136.48
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :4 (1 cement : 4 coarse sand) Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
111.71
-
123651.8
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)
5563.28
-
1707092.47
... More
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
496.94
-
141031.57
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge. (Single / double glass panes and siliconsealant shall be paid separately)) Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension.
316.22
-
3415255.06
... More
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
156.32
-
1639413.82
... More
Providing and fixing glazing in upvc door, window, ventilator, shutters and partitions etc. complete as per the architectural drawings and the directions of engineerin-charge. With toughen glass transparent in colour of 5.0 mm thickness.
289.96
-
420442
... More
Providing and fixing 8mm thick high pressure laminated sheets matt finish in upvc doors and partation walls etc complete as per the architectural drawing and the directions of engineer in charge
129.43
-
258860
... More
Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5mm width.
685.98
-
66642.96
... More
Providing and fixing carbon steel galvanized (minimum coating 5 micron)dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2) counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete masonry etc. as per direction of Engineer-in-charge.10x160mm
700
-
136955
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
389
-
51289.65
... More
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
389
-
25129.4
... More
Granite Work in Floors :- Providing and fixing ( gang saw cut mirror polished (flamed , pre-moulded and pre-polished), machine cut for flooring, steps ,risers of stairs etc.( flamed instaircase) of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding (of edges wherever required ) and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shape 18mm thick. and slab area over 0.50 sq m. (Note: The Granite stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc. upto site of work complete
1022.74
-
3062697.2
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
1098.73
-
1532838.22
... More
Providing and fixing ist quality ceramic glazed tiles in floors ( thickness to be specified by the manufactures) confirming to IS: 13753 of approved make of specified shades except Burgundy bottle green black of any size as approved by consultant over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3Kgs per Sq.m including pointing in white cement mixed with pigment of matching shade complete In all colours, shades, except White, Ivory, Fume Red Brown(300mm x300 mm )
100.19
-
117297.44
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Size if Tile 250 x 350 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).
965.8
-
1187064.78
... More
Providing and fixing Antiskid Vitrified pavement tiles(ramp tiles) 300x300x10mm thick laid on 20mm thick cement mortar 1:4 1 cement: 4 coarse sand] and jointing with Tile Grout as per approved colour complete as directed by Engineer-in-charge.
192.84
-
520668
... More
Proving and fixing of 24 mm thick rubber wood board for wall penelling designed in ornamental pannals shape square / rectangular. Including cost of necessary adhesive ,budloo wood backing and cost of nails etc specification and design approved by engineer in charge/consultants.complete job.
96.65
-
531575
... More
Proving and fixing of washable wall paper for wall Including cost of necessary adhesive specification and design approved by engineer incharge/consultants/client.complete job
141.64
-
158636.8
... More
Proving and fixing of 12mm thick t&g planks made of imported wood panalling (new zealand) pine or equilant for soffits and ceilings. Including cost of necessary adhesive ,budloo wood backing and cost of nails etc complete job
201.49
-
402980
... More
Provding/fixing of Khatambandi Ceiling (Panch murba of ist Class Budloo Wood) of specified pattern in ceilings etc. including, necessary frame work work of 50 mmx 75mm size and other incidentals including cornice of size 3” x 3” of Budloo Wood and 12mm thick ply board frame in lining of Budloo wood underneath all complete in all respectes.as per the directions of Consultant/as per the drawings enclosed
72.03
-
360150
... More
Providing & applying Plaster of Paris (gypsum anhydrous) suspended false ceiling Cove false ceiling), vertical or horizontal with wooden pattern in between with a ratio of ( 70% Gypsun ceiling -30% wooden ) up to any height above floor level, including fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive). Consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts. Other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size. The other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre. This shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval and reinforced with rabbit wire mesh of 100mmx16mm gauge fixed to frame.
100.8
-
312480
... More
Providing & Fixing of Armstrong/Equivalent make Mineral Fibre Acoustical Suspended Ceiling System with DUNE or Equivalent(Bevelled Tegular) Edge Tiles With 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 14Kgs/M2 & minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of approved make. ( The rate shall include making provision for light fixtures, AC grilles difusres etc). INSTALLATION:To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per recommended procedure. SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanised steel of size 26 x 26 x 25 x 1.2mm with a Galvanised Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.5 mm of 1.8 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68 mm with a minimum pull strength of 110 kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner.
957.78
-
3064896
... More
Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm
209.94
-
394991.61
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,by applying cemnet slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement@ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement compound @ 0.126 kg/sqm. This layer will be allowed t air cure for 4 hours followed with water curing of 48 hours. The rate includes preparation of surface, treatment and sealingof all joints ,ciorners, juntions of pipes and masonry with polymer mixed slurry.
1065.99
-
517111.75
... More
French spirit polishing, Two or more coats on new works including a coat of wood filler
470.91
-
179346.07
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
4725.27
-
855510.13
... More
Providing & applying Ist quality anti-bacterial washable Paint of approved manufacturers and of required shade and colour including a coat of primer complete. Two or more coats on new work.
3013.43
-
678021.75
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed)
185.97
-
106523.62
... More
Providing and fixing plannes eaves boarding (300mm x 40mm )( nominal size) second class kail wood fixed with screws etc, including all carraiges .All job completed
280.49
-
282593.68
... More
Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class kail wood
256.51
-
523511.26
... More
Providing and fixing high rib colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.5 mm thick including Hips and Ridges, valleys complete.
1631.04
-
2283456
... More
Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building. With resin bonded fiber glass wool with density 24 kg/cum
1631.04
-
1008716.69
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position budloo/Fire wood.
5.85
-
236979.99
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
1549.72
-
416022.33
... More
Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects.
142.71
-
107567.66
... More
Providing and Fixing 50mm dia Coated steel hand rails installed ihorizontally in walls. Including cutting, welding, grnding to required shape shape and sizeby required dash fasteners. Nuts,bolts,screws etc. complete job. Grade 304.
127.27
-
101816
... More
Providing & fixing of stainless steel nevel post (Ornamental ) including top ball of AISI 304 grade of required height duley anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050 mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete).Complete as per the directions of Engineer incharge.
10
-
13000
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.
24.54
-
81104.7
... More
Providing and fixing ball bearing for rolling shutters.
4
-
2126.2
... More
Extra for providing mechanical device chain crank operation for operating rolling shutters.
24.54
-
29987.88
... More
Providing and fixing devri stone clading 25 mm thick with exposed face fine dressed with rough backing on wall lining etc. upto 10 meter ht back filled with a grout of 12 mm thick cement sand mortar in 1:3 (fine cheiseled)including pointing in white cement 1:2 with admixture of pigment matching to stone.
186.8
-
617374
... More
Providing and fixing aluminum work including cost of aluminium extruded builtup sections, high pressure laminate, aluminium snap beading, neopeprene rubber gasket and all fixtures complete as per architectural drawings and as per the direction of engineer incharge including carriages complete in all respects.
90.33
-
451650
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and
similar works.
1650
-
299640
... More
Supply and installation signage plates for rooms.meeting halls etc of size 300mm x150mm x1.5mm in ss304 matt finish having letters engrave in the ss plate in black vinyl steam pressed to get a clean finish and having font size of name atleast 30mm fixed on the wall or door surface with high quality adhesive tape of 3M or equivalent complete to thesatisfaction of engineer in charge
45
-
67500
... More
Carriage of sand through Mechanical transport. Avg lead 8km
275.33
-
68204.75
... More
Carriage of Bajri through Mechanical transport. Avg lead 8km
8.36
-
2070.94
... More
Carriage of Bricks by Mechanical transport. Avg lead 15km
294381
-
270830.52
... More
C. Sanitary work
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid s approved by EIC .
17
-
131132.9
... More
Providing and fixing Table Top wash basin,with 32 mm Waste Coupling and other allied accessories including cutting and making good the walls wherever required:- White Vitreous ChinaTable Top Wash basin
17
-
118830
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
4
-
9381.4
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required :Size 600x450x200 mm
1
-
6139.85
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 250mm
3
-
18500.7
... More
Providing and fixing white vitreous china battery based infrared sensor perated urinal of approx. size 610 x 390 x 370 mm having pre & cost flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of Engineer-in-charge.
6
-
41579.1
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm
17
-
34821.95
... More
Providing and fixing toilet paper holder with Flap made out of C.P Brass
-
-
-
... More
C.P Brass
17
-
17199.75
... More
Providing and fixing C.P Brass Soap Dish.
17
-
12750
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
17
-
7005.7
... More
Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws .
17
-
20400
... More
Providing and fixing C.P brass bib cock with Auto closing System with Built in control Cock with Wall Flange of approved quality .
17
-
51000
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
114
-
66387.9
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
23
-
20001.95
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
17
-
85000
... More
Providing and fixing Stainless Steel Retractable Sink Basin Water Drain Pipe of approved quality & make and as per the direction of Engineer-in-charge. (For Kitchen Sink)
4
-
1243.44
... More
Providing and fixing CP Brass Sink Mixer with Regular Swivel Spout of quality & make as approved by Engineer in charge.
4
-
20000
... More
Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.
-
-
-
... More
110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
460
-
230000
... More
75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
100
-
45000
... More
Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required od approved brand as approved by Engineer incharge.
49
-
28175
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.
-
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
1620 (20 mm OD) pipe
250
-
128925
... More
2025 (25 mm OD) pipe
90
-
56956.5
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.
-
-
-
... More
Internal work (Exposed on wall)
-
-
-
... More
2025 (25 mm OD) pipe
90
-
38259
... More
2532 (32 mm OD) pipe
240
-
124512
... More
3240 (40 mm OD) pipe
5
-
3749.75
... More
Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.
-
-
-
... More
External work
-
-
-
... More
4050 (50 mm OD ) pipe
50
-
38275
... More
Providing and fixing unplasticised PVC connection pipe with brass unions:45 cm length
114
-
13543.2
... More
15 mm nominal bore
-
-
-
... More
Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks
50
-
18180
... More
Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment:5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks.
29
-
307481.2
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
250
-
64212.5
... More
Providing and filling sand of grading zone V or coarser grade all-round the Composite Pipes in external work & lay dry brick over sand layer to protect the pipe.
-
-
-
... More
4050 (50 mm OD ) pipe
100
-
24500
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of P.V.C pipes including bed concrete as per standard design :
-
-
-
... More
110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B
120
-
70800
... More
Supply, Installation of PVC Gully Trap of Size 110 mm Makes:-Astral/SFMC/Finolex
8
-
14000
... More
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
-
-
-
... More
40 mm Diameter
1
-
2000
... More
32 mm Diameter
5
-
9000
... More
25 mm Diameter
3
-
2910
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
-
87500
... More
D.Septic tank
-
-
-
... More
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
41.92
-
24854.37
... More
Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
2.6
-
2470
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level
1.18
-
6139.42
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
8.92
-
64895.23
... More
Centering and shuttering including strutting, propping etc. and removal of form work for:
-
-
-
... More
SLAB
28
-
20109.6
... More
Wall
8.84
-
5559.92
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more(codeno. 5.22A.6 ).
980.1
-
120748.32
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
8.74
-
66175.35
... More
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 fine sand)
21.42
-
6079
... More
15mm Cement plaster on the rough side of single or half brick wall of
mix: 1 : 4 ( 1 cement : 4 fine sand)
59.42
-
19480.85
... More
Carriage of sand /aggregate with avg lead of 8km
13.62
-
3373.95
... More
Carriage of bricks with avg lead of 15km
4170
-
3836.4
... More
E. Compound wall
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
318.88
-
81904.33
... More
Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
53.15
-
50492.5
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level
26.57
-
138241.05
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
132.87
-
875779.39
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
186.01
-
1066506.94
... More
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
336.59
-
96382.55
... More
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)
755.11
-
214300.79
... More
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand)
186.76
-
1685892.79
... More
Structural steel work in single section,in drain cover etc with M. S .angle ,square bars or as per the design approved by the consultant. complete. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job
5352.6
-
646594.08
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1209.46
-
223991.99
... More
Providing and fixing of Structural steel grill in built up sections I/C priming two or more coats as advertised by engineer in charge @1.5kg/sft
2701.65
-
373368.03
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
151.26
-
19942.97
... More
15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 4 ( 1 cement : 4 fine sand)
870.44
-
285374.74
... More
Carriage of Sand Bhajri for an average lead of 8 km
527.9
-
130618.3
... More
Carriage of Brick for an average lead of 15 km
89104
-
81975.68
... More
F. Road
-
-
-
... More
Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters.(SSR 2022)16.1
1898.42
-
290458.26
... More
Providing and laying of Nallah muck including carriage of material from source to site of work completeincluding consolidation to MDD at OMC
264.41
-
237969
... More
Supply and stacking of graded stone aggregate at site of size range 63-45mm Grade 2nd with stone screening/Chippings 13.20mm size nominal size type -A stone dust moorum (Khak Bajri) at site including all Carriage and Laying water bound macadam with specified stone aggr., stone screenings and binding material incl. Screening, sorting, spreading to template and consolidation with PRR with 8-10 tone capacity etc complete.
144.75
-
361872.5
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
144.75
-
272989.38
... More
Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. On W.B.M. @ 0.75 Kg/sqm
1898.42
-
141147.53
... More
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in
Batch Type Hot Mix Plant of 100-120 TPH capacity.
94.92
-
815461.56
... More
Providing and laying 25mm thick compacted semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. Plant of 100-120 TPH capacity. 25 mm compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
1898.42
-
556426.9
... More
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
1898.42
-
192499.79
... More
G. Path
-
-
-
... More
Earth work in excavation by mechnical means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil. 50 meter beyond 1 m from cutting edge50 meter beyond 1 m from cutting edge
308.25
-
79174.01
... More
Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
123.2
-
117040
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. all acrriage upto site of work
61.65
-
339075
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. all acrriage upto site of work
102.75
-
616494
... More
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement
673.79
-
871617.33
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
92.12
-
788869.62
... More
H. Land scaping
-
-
-
... More
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) incl Spreading of good earth in lawns with avg lead of 5.00km
2524.94
-
1343825.16
... More
Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
2524.94
-
135210.54
... More
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.)in rows 5cm apart in either direction.
6068.77
-
82171.15
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts
6068.77
-
375171.36
... More
I. Gate
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
7.14
-
1833.91
... More
Providing and laying of hand packed stone boulder (size 150mm-230mm) before laying of PCC compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.
1.19
-
1130.5
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
0.6
-
3121.74
... More
Providing and laying in position specified grade of reinforced cement concrete including
curing but excluding the cost of centering, shuttering, finishing and reinforcement. All
works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
3.44
-
26792.1
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto levels Thermo-Mechanically Treated bars of grade Fe-500D or more.
457.45
-
56357.84
... More
Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns
20.26
-
5801.45
... More
Providig and layung of GSB filling Under foundation including all carriage upto site of work
4.17
-
3961.5
... More
DEVRI STONE WORK Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing.Fine chisel dressed
20.49
-
206045.39
... More
Stone work, in copings, cornices, string courses and plinth courses, upto 75mm thick, in cement mortar 1:6 (1 cement : 6 Coarse sand) including pointing with white cement mortar 1:2 (1 cement : 2 Stone dust) with an admixture of pigment matching the stone shade& curing complete Red sand stone
0.6
-
41543.55
... More
Structural steel work in single section,in gates etc with M. S .flats ,square or round bars or as per the design approved by the consultant. complete. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job incl. hold fast
1430
-
197626
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
37.17
-
4900.86
... More
Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron of size 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as perdirections of Engineer-in-charge.
6.51
-
50439.48
... More
Supply & fixing stainless steel (SS) letters made with SS-304 grade 20 gauge sheet of as per the approved size & shade including fixing on stainless steeL (SS) sheet in required height line & level including s/o all T&P etc. required for proper completion of work. Before making the letters the font & size will be got approved.
2.23
-
10213.4
... More
Providing & fixing of Granite plate work for wall over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry including embeded words as per the drawings approved by the consultant & direction of Engineer Incharge.
2.97
-
16869.6
... More
Carriage of sand and agg with lead upto 8km
5.45
-
1348.49
... More
J. Drain
-
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil
170.07
-
43682.48
... More
Providing and laying hand packed stone soling including ramming and dressing including all leads lifts and all carriages complete. Including carriage upto 15 km
21.26
-
20197
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
21.26
-
110613.65
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
162.84
-
1073319.15
... More
entering and shuttering including strutting, propping etc. and removal of form work for: Foundations,drains etc
649.63
-
186021.55
... More
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)
440.52
-
125019.58
... More
Structural steel work in single section,in drain cover etc with M. S .angle ,square bars or as per the design approved by the consultant. complete. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job
5185
-
626348
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
418.22
-
55142.31
... More
Carriage of sand and agg with lead upto 8km
248.53
-
61493.78
... More
H. Soakage pit
-
-
-
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil
50.93
-
24410.75
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or
drains and the like.
38.17
-
6404.93
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1.31
-
12866.62
... More
Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.
10.46
-
7512.37
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more
143.8
-
17716.16
... More
Dry random rubble masonry with hard stone in foundation and plinth:With bond stone
36.88
-
204187.96
... More
Carriage of sand and Bajri with lead of 20km
1.9
-
778.89
... More
Carriage of stone from Athwajan with lead of 18km
36.88
-
16651.69
... More
Electric part (sub head wiring)
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor( Havell/salzer/ anchor/ equivalent as directed by engineer incharge.) single core cable in surface / recessed medium class PVC conduit, with modular switch ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.), modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
-
-
-
... More
Group C
443
-
531600
... More
Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor ( Havell/salzer/ anchor/ equivalent as directed by engineer incharge.) single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.
1770
-
591180
... More
Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor ( Havell/salzer/ anchor/ equivalent as directed by engineer incharge.),single core Cable in surface/Recessed medium class PVC conduit as required.
-
-
-
... More
2 X 2.5 SQ.MM + 1 X 2.5 SQ.MM Earth Wire
2220
-
610500
... More
2 X 6 SQ.MM + 1 X 6 SQ.MM Earth Wire
140
-
61460
... More
4 X 16.0 SQ.MM + 2 X 6.0 SQ.MM Earth Wire
500
-
682500
... More
4 X 4 sq. mm + 2 X 4 SQ.MM Earth Wire
320
-
171840
... More
4 X 6 sq. mm + 2 X 6 SQ.MM Earth Wire
320
-
241280
... More
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
66
-
2640
... More
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.) outlet and 15/16 amps modular switch( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.),connection,painting etc. as required.
112
-
65632
... More
Supplying and fixing two module stepped type electronic fan regulator ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.) on the existing modular plate switch box including connections but excluding modular plate etc. as required.
71
-
26199
... More
Supplying and fixing of 25 A 240 Volts Modular MCB in Modular Box ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.), on surface or in recess, complete with connections, testing and commissioning etc. as required.(For 1.5 Tr A.C)
7
-
5089
... More
Supplying and fixing of 32 A 240 Volts Modular MCB in Modular Box, on surface or in recess, complete with connections, testing and commissioning etc. as required.(For 1.5 Tr A.C)
7
-
6930
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.), connections etc. as required.
10
-
4770
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 An modular switch ( Legrand Mylinc /SSK NV/schneider Zencelo /Crabtree athena make.), connections etc. as required.
44
-
29744
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 way (4 + 18), Double door
10
-
49740
... More
8 way (4 + 24), Double door
10
-
59670
... More
12 way (4 + 36), Double door
1
-
12000
... More
Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single Pole
190
-
48640
... More
Supplying and Fixing of Following Ratings of D.P MCB 240 Volts "C" Series in the Existing MCB D.B complete with connections,Testing and Commissioning Etc. as Required.
-
-
-
... More
25 A D.P MCB 10 Ka "C" Curve
31
-
18321
... More
32 A D.P MCB 10 Ka "C" Curve
7
-
4137
... More
63 A D.P MCB 10 Ka "C" Curve
27
-
25785
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
63 A F.P MCB 10 Ka "C" Curve
9
-
16407
... More
25 A F.P MCB 10 Ka "C" Curve
8
-
7536
... More
Supplying and fixing single pole blanking plate in the existing
MCB DB complete etc. as required.
66
-
858
... More
Supplying,Installation,Testing and Commissioning of G.I Earthing Electrode of Size 50 x 3000mm with GI Pipe Outer Dia. 58 mm (+-) 5 %,Length 3000 mm,Inner & Outer GI Strip Size 32X6mm,Terminal Hole Two Nos.,Terminal Hole Dia. 14 mm,Seal Plate Thickness 4 mm,Base Plate Thickness 4 mm,Inner filling Material – Highly Conductive Super Crystalline Mixture,Outer filling material - Highly Hygroscopic, Non corrosive Back Fill Compound 50 Kgs.
2
-
20000
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
40
-
28240
... More
Supply installation testing and commissioning of IP20 led downlighter 18 W +/- 1 W LED Recess downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab . Philips/ Trulux /Wipro make /equivalent make to e desired by enginneer incharge( sample to be approved before installation)..
68
-
72488
... More
Supply installation testing and commissioning of IP:20 Aluminium Batten 40 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab. Philips/ Trulux /Wipro make /equivalent make to e desired by enginneer incharge( sample to be approved before installation)..
46
-
35328
... More
Supply installation testing and commissioning of IP20 led downlighter 15 W-18 W +/- 1 W LED Surface downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
6
-
7938
... More
Supply installation testing and commissioning of Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.
71
-
159750
... More
Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of ABS Plastic Material with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .
-
-
-
... More
300 mm
17
-
26197
... More
Supply installation testing and commissioning of IP:20 Aluminium Batten 10W-12 W +- 1 W LED Surface Mounted 2 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab. Philips/ Trulux /Wipro make /equivalent make to e desired by enginneer incharge( sample to be approved before installation)..
18
-
9594
... More
Supply installation testing and commissioning of IP65 led Street Light With Toughened Glass and Secondary Lens 90 W +/- 5 W complete with M.S/G.I Pipe(Duly Bracket embedded along with Parapet/Wall including complete connections as required .The P.F.0.95 ,THD10% ,CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 265V. The Fixture should have In-built Surge Protection of 2.5kV Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab . Philips/ Trulux /Wipro make /equivalent make to e desired by enginneer incharge( sample to be approved before installation)..
7
-
59500
... More
Supply & Fixing of 36W , 2x2 LED reccesse type Luminaire suitable for operating Voltage range of 150V-270V with inbuilt surge protection of 2KV and Color temprature 5700K ANSI BIN . Minimum system lumens 4320 and system efficacy 120 Lm/watt (Supported by in house NABL approved report of LM79 provided by OEM and duly signed by company manager not below rank of RM) . Luminaire should be suitable for armstrong /grid ceiling mounting with help of 4 Nos clips for suspension. Body made up of CRCA powder coated with Diffused Optics. Luminaire size should not be less than 595x595x60mm and power factor =0.95, CRI=80, THD10%, Max system wattage should be 36 Watt, IP-20 ingress protection. NABL certification and BIS (both luminaire and driver) requried to be provided at the time of sample approval. Philips/ Trulux /Wipro make /equivalent make to e desired by enginneer incharge( sample to be approved before installation)..
217
-
474145
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)( Main L.T Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
1
-
447909
... More
INCOMER
-
-
-
... More
TMR Based MCCB 400 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
-
-
-
... More
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 500 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
-
-
-
... More
OUTGOINGS
-
-
-
... More
TMR Based MCCB 320 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)Legrand/ Shinider/Semiens make.
-
-
-
... More
TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos) Legrand/ Shinider/Semiens make.
-
-
-
... More
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
-
-
-
... More
Partitions to be made out of 1.6 mm CRCA Sheet
-
-
-
... More
Gland Plates to be 3.0 mm Thick.
-
-
-
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Main Building Distribution Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.
1
-
234842
... More
INCOMER
-
-
-
... More
Adj. TMR Based MCCB 320 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos) Legrand/ Shinider/Semiens make.
-
-
-
... More
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 400 Amps ) , MCB Strip,Indicating Lamps,Multifunction Meter,Ammeter,Voltmeter etc. of suitable size as Required.
-
-
-
... More
OUTGOINGS
-
-
-
... More
TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos) Legrand/ Shinider/Semiens make.
-
-
-
... More
25 A F.P MCB 10 Ka "C" Curve(05Nos)
-
-
-
... More
63 A F.P MCB 10 Ka "C" Curve(10Nos)
-
-
-
... More
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
-
-
-
... More
Partitions to be made out of 1.6 mm CRCA Sheet
-
-
-
... More
Gland Plates to be 3.0 mm Thick.
-
-
-
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( UPS Distribution Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.
1
-
93875
... More
INCOMER
-
-
-
... More
Adj. TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)Legrand/ Shinider/Semiens make.
-
-
-
... More
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 80 Amps ) , MCB Strip,Indicating Lamps,Multifunction Meter,Ammeter,Voltmeter etc. of suitable size as Required.
-
-
-
... More
OUTGOINGS
-
-
-
... More
32 A F.P MCB 10 Ka "C" Curve(01 Nos)
-
-
-
... More
16 A D.P MCB 10 Ka "C" Curve(01 Nos)
-
-
-
... More
16 A F.P MCB 10 Ka "C" Curve(05 Nos)
-
-
-
... More
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
-
-
-
... More
Partitions to be made out of 1.6 mm CRCA Sheet
-
-
-
... More
Gland Plates to be 3.0 mm Thick.
-
-
-
... More
Supplying and laying of following size DWC HDPE pipe ISI marked
along with all accessories like socket, bend, couplers etc.
conforming to IS 14930, Part II complete with fitting and cutting,
jointing etc. in the existing trench, complete as required.
-
-
-
... More
200 mm dia (OD-200 mm & ID-175 mm nominal)
300
-
200400
... More
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
3.5 C X 300 Sq.mm A2XFY
150
-
585000
... More
3.5 C X 25 Sq.mm A2XFY
150
-
67500
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
-
-
-
... More
3½ X 300 sq. mm (70mm)
4
-
4780
... More
3½ X 25 sq. mm (28mm)
2
-
626
... More
Supplying and installing following size of perforated Hot
Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100mm (W) x 50 mm (H) wide cable tray perforated type
95
-
63555
... More
450mm (W) x 50 mm (H) wide cable tray perforated type
195
-
258375
... More
Supply, transportation,Unloading , installation,testing & Commissioning of the following rating of UPS System(IGBT Based) including unloading,transportation from store to site ,errection instlattion,testing of UPS System including Battery and Battery rack errection & Installation under the supervision of supplier of UPS. Note:- Contractor has to submit the drawings & battery selection detail before procurement. Specification of UPS system shall be provided with Static by pass and Maintenance by pass facility with distribution board .APC/ETON/VIRTIV/ Equivalent standard make
-
-
-
... More
40 KVA UPS , Input 3 Phase 4 wire and output 3 phase 4 wire with 30 min. Back up
1
-
960000
... More
S/I testing and comm. Of three phase 250 KVA 50HZ oil cooled(Transformer oil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(A.E / Cosco/ Electricfield/ Chinar make) with bypass facility, having an input voltage ranging from 156V to 415 V ( phase to phase) and balanced output voltage of 415V, +/- 1%. ( Test certificate to be provided by the manufacturer) The unit incorporate
-
-
-
... More
a) 0-500V moving iron type voltmeter with selector switch.
-
-
-
... More
b) A three phase change over switch to read voltage on incoming and output side
-
-
-
... More
c) indicating lights 6 No two numbers for each of the motorised units, one for lower limit and other for higher limit.
-
-
-
... More
d) six push button control for movement operation of three motorised dimmer units two for each unit i.e one for raise operation and one for lower operation under the conditions of adjustment of auto/mannual selector switch (DPDT)
-
-
-
... More
e) Single phase Preventer ( contactor Switch of required rating) Legrand make.
-
-
-
... More
f) six potential meter resistance with lock meter two for each phase control, one for sensitivity and other for level control.
-
-
-
... More
g) two sets of indication lamps three numbers each to indicate output and input indication
-
-
-
... More
h) 20 % over load bearing capacity for one hour.
1
-
698000
... More
CCTV/Internet/Telephone
-
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
RJ 45 Socket
64
-
29590.4
... More
Telephone socket outlet
29
-
4292
... More
Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm PVC Conduit
2200
-
281600
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
1420
-
80940
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVCinsulated annealed copper conductor, unarmored telephone
cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair
800
-
30400
... More
Supply, installation, testing and commissioning of Junction Boxes/DB-10 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC
1
-
1636
... More
Supply, installation, testing and commissioning of Junction Boxes/DB-20 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC
1
-
2809.65
... More
Supply & Erection of lockable 9/12 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC.
2
-
18493.86
... More
Supply & Erection of Cat-6, 1Mtr Patch Cords complete as per specification and as desired by EIC.
64
-
15477.76
... More
Supply & Erection of Cat-6, 3Mtr Patch Cords complete as per specification and as desired by EIC.
47
-
17718.53
... More
Supplying,Installation,Testing and Commissioning of 55 Inches Full H.D LED Display Monitor as per the Specifications attached.
1
-
59707.31
... More
Supplying of 16 Channel Network Video Recoder(NVR) as per the Specifications Enclosed with a Hard Disk Memory of 8 TB capacity.
1
-
45523.37
... More
Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T Compliant, UL/CSA, CE, FCC, EN, RoHS & NDAA Section 889 compliant.
14
-
280000
... More
Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Bullet Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T Compliant, UL/CSA, CE, FCC, EN, RoHS & NDAA Section 889 compliant.
3
-
54000
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
93
-
27714
... More
CAMC for CCTV/ Internet/ Telephone for three years after the completion of DLP of 1 year.
1
-
70000
... More
Fire Detection
-
-
-
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm \panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.
-
-
-
... More
one Loop Panel.
1
-
239225
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
-
108688
... More
Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with
mounting base complete as required.
103
-
294374
... More
Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as
required.
4
-
10604
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
6
-
19620
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
4
-
15484
... More
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor
having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR)
insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
1030
-
369770
... More
SITC of Dry Type Co2 Type Fire Extinguisher 4.5 Kg
4
-
31453.52
... More
SITC of ABC Type Fire Extinguisher IS 15683 4.0 Kg Having Deep drawn and CO2 MIG welded can construction ,Epoxy polyester powder external coating,Epoxy powder internal coating,Body Thickness 1.6 mm(Cease fire)
2
-
5335.85
... More
Modernization/Renovaton of Conference Hall
-
-
-
... More
Supply Installation Testing and Commissioning of Digital Chairman Unit with fixed microphone with flexible stem can be easily adjusted to suit the user- long 480- 500 mm ,Built-in loudspeaker with volume control,Built-in volume control for headphones, Possible-to-speak indication,Request-to-speak indication,GSM immunity,Frequency response 200 Hz to 12.5 kHz,Loudspeaker nominal output 72 dB SPL,Color-coded LED indicator above microphone button for showing the following states: microphone on, request-to-speak, and possible-to-speak Light-ring indicator in head of microphone, cable and accessories as required. BOSCH/ Equivalent standard make as desired by engineer incharge.
1
-
54745
... More
Supply Installation Testing and Commissioning of Digital Delegate Unit with fixed microphone with flexible stem can be easily adjusted to suit the user- long 480- 500 mm ,Built-in loudspeaker with volume control,Built-in volume control for headphones, Possible-to-speak indication, Request-to-speak indication,GSM immunity,Frequency response 200 Hz to 12.5 kHz,Loudspeaker nominal output 72 dB SPL,Color-coded LED indicator above microphone button for showing the following states: microphone on, request-to-speak, and possible-to-speak Light-ring indicator in head of microphone, cable and accessories as required. BOSCH/ Equivalent standard make as desired by engineer incharge.
26
-
1360840
... More
Supply Installation Testing and Commissioning of Digital conference system controller with connection of up to 80 Discussion Devices from day one( provide expansion unit accordingly from day one) and expandable upto 220 Delegate Units ,Built-in MP3 recorder with internal memory and USB recording,Internal /External( Digital Acoustic Feedback Suppression) (DAFS) for ensuring superior speech intelligibility, support for automatic HD camera control,Web browser control for configuration, Built-in monitor loudspeaker,built-in loudspeaker and headphone socket allows for:live monitoring of a meeting , indicators for showing-Open microphone, Mains power on/off,Plus/minus buttons for setting the volume range, RJ45 Ethernet,USB recording LED indicator.BOSCH/ Equivalent standard make as desired by engineer incharge.
1
-
275000
... More
Supply Installation Testing and Commissioning of SITC of power cable of 10 mtrs with connectors,The System Network Cables are terminated at both ends with connectors with additional power pins. The system network cables are used to connect a conference device to the audio powering switch or to the powering switch. It provides network communication and power transports in one cable. The system network cables are used when loop‑trough and redundant cable connections are required.
2
-
69000
... More
Supply Installation Testing and Commissioning of Ceiling/Wall Mount speakers with minimum SPL of 107 db and nominal horizontal coverage angle of 160˚, the speaker should have minimum program power rating of 24 Watts and nominal impedance of 8 ohms, it shoud have inbuilt transformer taps of 24 watt @ 70/110 V.
8
-
98400
... More
Supply Installation Testing and Commissioning of 240 watts mixer amplifier with Low-Z and high-Z operation, Frequency response: 50 Hz-20KHz, Signal To Noise Ratio:90 dB.
1
-
38520
... More
Supply Installation Testing Commissioning of UHD LED 65" resolution 3840x2160, Brightness 500 Nits,Contrast Ratio 3000:1, Viewing angle 178/178,Response Time 8ms,display Colour 16.7m,Built in 15 watt speaker , Input : RGB, DVI-D, Display Port 1.2, HDMI 2.0, Stereo Mini jack, DVI , HDMI, Usb 2.0 with 03 years warranty
2
-
197000
... More
Supply Installation Testing Commissioning of UHD 4k smart LED 43" on wooden decorative stand as per instruction of Engineer in-charge resolution 3840x2160, Brightness 500 Nits,Contrast Ratio 1100:1, Viewing angle 178/178,Response Time 8ms, aspect ratio 16:09, refersh rate 60 Hz, Dolby Audio display Colour 16.7m,Built in minimum 15 watt speaker , Input : RGB, DVI-D, Display Port 1.2, HDMI 2.0, Stereo Mini jack, DVI , HDMI, Usb 2.0 with 03 years warranty
1
-
47000
... More
Supply , Installation testing and commissioning of 86'' interactive touch panel, Backlight DLED Panel, Touch technology VA, Display Ration 16:9, Brightness Contrast 450 cd/m², Ratio (Typ) 5000:1, Native Resolution 3840 x 2160, Viewing Angle (H/V) 178 degree /178 degree, OPS i5 10 Gen 8 GB 1 TB SSD with windows 10 licenced, 80 PIN. Response Time (MS) 8.5ms, Refresh Rate (Hz) 60Hz, Estimated Life Time 50,000 hours (Min), Color Depth 10bit, No. of Colors 1.07 Billion, Pixel Pitch 0.42975×0.42975mm, Display Area 1650.24(H) × 928.26 (V)mm, Speaker 2 x 16W, OPS, Annotation - 10 point, touch -40 point, sensitivity any touch with finger, Sloved hand, Pointer, Stylus Pen Internal Storage 32GB (eMMC Flash) (About 25GB User lability) Windows10 / Windows8 / Windows7/Android /Windows XP/Linux/Mac OS X/Chrome, Response Time 10ms, Accuracy ±2mm, Toughened Glass 4m with Level 7 of Mohs Standard, Operating System:- Android 8.0, CPU A73*2, A53*2 , GPU Mali- G51*2, RAM 3 GB, ROM 32GB, Connectivity- HDMI IN x 4, USB 2.0 x 8, USB3.0 x 8, LAN RJ45 Date x 1, RJ45 OUT x 1, VGA In x 1, Audio In (3.5mm) x 1, RS232(Service) x 1, Touch OUT x 3, hdmi out x 1, audio out(3.5mm) x 1, spdif x 1, usb type-c x 1, etc complete as required. complete etc as reqd.
1
-
375000
... More
"Supply Installation Testing and Commisioning of wireless handheld Microphone with -32 preset channels, with compatible groups of eight (8) channels for simultaneous use14 hour battery life from two (2) AA alkaline batteries , Rugged metal transmitters with backlit LCD display and battery gaugeNumber of Channels: 32 Modulation: ± 40 kHz Diversity: True Antenna RF Sensitivity: 1.0 μV for 12 dB SINAD Image Rejection: 55 dB Squelch: Tone Code plus Amplitude,Frequency Response: 80 Hz – 18 kHz ± 2 dB Balanced Output: 20 dBV (max @ 40 kHz deviation) Unbalanced Output: Adjustable 8 mV to 0.755V RMS Distortion: 1.0%, 0.4% Signal-to-Noise Ratio: 100 dB
3
-
91050
... More
Supply Installation Testing and Commissioning of Popup
Box, Pop–Up Table Mount Multi–Connection Solution, Elegant
in–table compact solution, CE qualified, 4 Fixed Inputs — 15–pin HD, HDMI, 3.5mm & Ethernet. PORTS - HDMI connector,,Ethernet RJ–45 connector, 15–pin HD connector, 3.5mm mini jack.
6
-
129000
... More
Supply Installation Testing and Commissioning of HDMI high
performance, High–Speed HDMI Cable 10mtr supports signals up to 4K@60Hz (4:4:4), Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS−HD, CEC. Provide an uncompressed digital link between consumer electronics equipment such as DVD players, set–top boxes and audio/video monitors such as plasma display screens for
high–definition TVs.
5
-
97500
... More
Supply installation testing Commsioning of 24 Uwith fully loaded including rack,pdu and all accessories required Standard rack to place all Av equipment
1
-
22600
... More
Supply installation testing Commsioning of speaker cable core 2x1.5 sq mm with all accessories as required.
180
-
25200
... More
SITC of UHD+ 8×8 HDMI Matrix switcher with Audio Output with 18Gbps (600MHz) 4K UHD support, Supports HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) & 4096×2160@60Hz (4:4:4, 8-bit), Supports 16-bit Deep Color up to 1080p@60Hz, Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream, and HD Bitstream, Supports six internal EDIDs, eight external EDIDs copied from connected devices, and four user provided EDIDs, Input Signal Types 4096x2160p@60 8-bit YUV 4:4:4, Output Signal Types 4096x2160p@60 8-bit YUV 4:4:4, Digital Formats HDMI 8CH LPCM, Bitstream, HD Bitstream, etc complete as required.
1
-
293635
... More
Supply , Installation , Testing & Commissioning of HDMI Extender Kit. Must extend over ethernet cable HD singal minimum upto 60 mtrs & 4K UHD signal minimum upto 40 mtrs. Must require no adjustment or Tunning. HDMI 1.4 Compliant, HDBaseT, HDCP compliant, Must Support Embedded HDMI Audio, Including Dolby® TrueHD and DTS-HD Master Audio. Bandwidth: 3.4 Gbps or better, should Supports HD 3D formats & PC resolutions up to WUXGA, HDCP Repeater and CEC bypass, Bi-directional infrared remote control extensions. Operating temperature: 0 to 40°C or better & Storage temperature: -20 to 60°C or better.
6
-
268746
... More
Supply , Installation , Testing & Commissioning of HDMI to HDMI cable 20 Mtr etc. as reqd.
6
-
98539.2
... More
Supply , Installation , Testing & Commissioning of HDMI to HDMI cable 1.5 Mtr etc. as reqd.
17
-
25388.65
... More
Supply Laying & Fixing of of Microphone lines high grade, professional low-noise, 2 crore high conductivity PVC insulated in PVC jacket, shielded copper cable with Di- electric insulator both end with XLR m/f connector as required.
220
-
14080
... More
Supply, installation, testing and commissioning of Video Conferencing sytem having specification.
Video Standards and Protocols H 264 AVC, H264 High profile H.256 Video Input - 1 x HDCL 1 x HDMI 3 x USB Video Output - 2 x HDMI people video resolution, 4K, 30b fps ( TX and RX) content sharing:- poly content APP support /Apple Air Play/Miracast/ 1x HDMI Input Audio :- poly Noise Block AI Technology Audio input - UP to three 1 x IP microphone arrays (20 ft pickup range each)- 1 x HDMI - 1 x 3.5 mm stero line- in Microphones Upto three IP microphone arrays (20 ft pick up range each) Audio Output 1 x HDMI 1 x 3.5 mm stereo line-out other interfaces 3 x USB 3.0 1 x USB-C 1 x RS-232, 8 pin mini DIN Bluetooth 5.02 wifi 802, 11 a/b/g/n/ac (MIMO) Multichannel Concurrency Interoperability Zoom Certified Microsoft teams certified, All Cloud services providers through- poly video App model . USB Devices Mode. Support for native 3rd party application includes Zoom Rooms, Microsoft Team, Ring Central Go to Room Dialpad Package includes G7500 codee cable Bundle Bundles available with camera, touchcontroller, Bluetooth remote control, and IP table microphone with E60 PTZ Camera 4K (Polycom H.P/CISCO) complete with decorative glass stand with S.S clamps etc. as required. Warranty :- One year of make Polycom Group with E60 PTZ Camera 4K 7500/Cisco
1
-
850000
... More
Supply Installation testing and commissioning of 5 KVA/ 4 KW True Online , DSP Controlled online UPS with 1 phase AC input 50Hz and 1 phase AC output with 60 minutes backup on 12V SMF batteries Bank with Rack along with inter connecting battery cables and cable from UPS to Battery bank. The UPS should be with IGBT Based Rectifier and Inverter and with LCD/LED display for monitoring of its status along with inbuilt Galvonic Isolation Transformer. UPS should have following Features: UPS power factor : Input PF should be 0.99 AND output PF not less than 0.9 , Efficiency: up to 97% without Isolation ,Communication interface :RS232/USB port and optional SNMP compatibility for remote Monitoring , Audible Alarm : Mains Failure/Low battery /UPS Warning /Overload/Fault & Bypass Mode , THDI: not more than 5% , Noise Level less than 70db ,CERTIFICATIONS & Standard : ISO-9001-14001 Certified ,Compatibility with DG Genset , Built in Automatic & Maintenance Bypass Switch , Warranty : 2 Years on UPS as well as on Batteries, Battery Make : Exide /Amaron/Quanta/ Panasonic Make Preferred/Approved Brand : APC-Schneider /Emerson –Vertiv /Legrand-Numeric.
1
-
185000
... More
CAMC for Audio and Video system for Three year after Defect liability period of 1 year
1
-
300000
... More
FIRE FIGHTING ( Mechanical)
-
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
25 mm dia
10
-
7440
... More
80 mm dia
10
-
18850
... More
100 mm dia
80
-
204400
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :
-
-
-
... More
Single headed Gunmetal
3
-
22938
... More
Supplying and fixing orifice plate made out of 6 mm thick Stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
3
-
3963
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
-
-
-
... More
Gun Metal
6
-
31212
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required.
20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.
-
-
-
... More
30m
2
-
17350
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
-
-
-
... More
2way - 100 mm dia M.S. Pipe
1
-
6742
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade
as required.
1
-
18244
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
5000
-
43750
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :
-
-
-
... More
Gun metal
3
-
7248
... More
Providing and fixing Weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 mx 0.25 m).
3
-
14743.81
... More
Providing and fixing standard fireman's axe with heavy insulated rubber handle conforming to IS: 926 complete.
3
-
3791.26
... More
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
-
-
-
... More
(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure,horiziontal foot mounted type with Class-'F' insulation,
conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling
guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered
and with anti vibration pads.
-
-
-
... More
450 lpm at 35 m Head
1
-
86203
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55) (Terrace Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD having latest amendment IEC/IS 61439 certification
12
-
26400
... More
INCOMER
-
-
-
... More
MCCB 63 A F.P 25 Ka with Adj. Thermal & Adj. magnetic release with Extendable ROH Icu=Ics=100%
1
-
8634
... More
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(80 Amps ) and MCB Strip of suitable size as Required.
1
-
4000
... More
OUTGOINGS
-
-
-
... More
MPCB 19-25 A With STD. Magnetic Release
1
-
4936
... More
Power Contactor 40 A415 Volts, AC-3 Duty
1
-
3685
... More
Start/Stop Push Button
1
-
700
... More
Size of wiring for CTS:- 2.5 sqmm
-
-
-
... More
Size of wiring for voltage sensing Metering :-4.0 Sq.mm
-
-
-
... More
Size of wiring of all push buttons, indicating lamps:-1.5 Sq.mm
-
-
-
... More
Types of wires:-PVC insulated 1100V grade ,Multistrand copper conductor Flexible FR-LSH
-
-
-
... More
Hinged Door Earthing:-Device mounted hinged doors connected to cubicles body by means of 2.5 sqmm.green copper flexible wire .
-
-
-
... More
The Complete Panel Shall be Made out of 2.0 mm CRCA sheet including Frame/Partitions/Doors etc.having latest amendment IEC/IS 61439 certification
-
-
-
... More
Gland Plates to be 3.0 mm Thick.
-
-
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
100 mm dia
2
-
13334
... More
80 mm dia
3
-
14946
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
100mm dia
2
-
22100
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia
holes with stainless steel flange.
-
-
-
... More
100mm dia
1
-
6664
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required.
1
-
1546
... More
Providing, installation, testing and commissioning of Pressure Guages
3
-
7500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%