Public Works Department Tender

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Structural steel work welded in built up sections, trusses and framed work, soffits, eaves boarding and like including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Providing & fixing high rib profiled sheeting 1000 mm minimum cover width with minimum 28-32 mm crests, manufactured out of 0.50 mm TCT (Total Coated Thickness) Hi-Tensile SMP Galvalume steel. The sheets shall have wide pans with 2 to 3 nos. stiffening ribs, effective water shedding and special male/female ends with return legs on side laps for purlins support and anti-capillary flute in side, lap. The sheets shall have a hot-dip metallic coating of Zinc and Aluminium (150 gms/sqm zinc/alum.coating mass total on both sides, AZ-150 as per AS1397), 550 Mpa yield stress, providing silicon modified polyester coating of approved colour of total thickness of 35 microns comprising of 20 microns exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces including, ridigs/ Hips / Valley/ laps and using 12 mm polymer coated hot dip galvanised hex self drilling fasteners on each crest of sheets for connection with purlins.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Providing and fixing glass panes with wooden beeding and glazing clips in doors, windows, clerestory windows, all complete with 4.0mm thick glass panes

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge. a. 16mm dia

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) a. 15mm dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) a. 25mm di

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : 18.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing health faucet with chain of standard quality and make including all fixtures.

Providing & fixing C.P. toilet paper holder, with roller complete, including cutting and making good the walls wherever required.

Providing & Fixing C.P. mixer for wash basin of approved make including cutting and making good the walls wherever required.

Providing & Fixing C.P. wall mixer of approved make including cutting and making good the walls wherever required.

Providing and fixing angle value of standard quality and make including all accessories complete job

Providing & Fixing C.P. tubes of approved make 450mm to 600mm longh

Providing and fixing of soap case of standard quality and make.

Providng and fixing of 600mm longh CP towel rods of standard quality and make

Providng and fixing of bip cock of standard quality and make

Providing Over head PVC Storage tank triple layer ISI mark of approved make including allied tank fittings such as tank nipples etc making of necessary connections complete.