Public Works Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Feb 2025
Closing Soon12 Mar 2025
Tender Amount₹ 2,00,29,849
Costs
EMD
₹ 4,00,597Document Cost
₹ 5,500Tender Fee
Refer Documents
Summary
Repair Renovation Works Of Sanat Ghar Bemina Part B
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDJK_272883_1Tender No
NIT No 72/EE/RnB/BM/CS/10430-38 Dated 19/02/2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Demolishing brick work manually/by mechanical means including
stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
9.49
-
-
... More
Engagement of plumber for diamantling of saintary items safely and / acessories etc. and fixing the serviciable material/ acessories after renovations of washrooms including stacking of serverciable material at site and disposal of surplus material etc. complete.
180
-
-
... More
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead and including additional manual lead of 200meters and its disposal out side municipal limits.
1903.85
-
-
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) incl. Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level incl. carriage of all materail complete.
10.01
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including carriage of material upto site of work ) including additional lead of 200 meters etc complete
18.61
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) including all carriage of material upto site of work). and additional lead 200 meters etc complete.
46.53
-
-
... More
Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm
1022.76
-
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours the rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
1349.39
-
-
... More
Providing and Laying of 12mm thick Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) on inner and outer walls incl. carriage of all material involved etc. complete.
1982.15
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
369.51
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be
specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shades, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) size of tile 1000x1000mm .
1894.43
-
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of organic coated filler of desired shade
(0.10 kg of hardener and 0.20 kg of resin per kg), including filling /
grouting and finishing complete as per direction of Engineer-in-charge. size of tile 1000x1000mm .
1894.43
-
-
... More
Providing and Fixing of PVC Pipes / Fitings of reputed make, incl. carriage of all materials involved complete.
-
-
-
... More
4'' PVC pipe (b-type)
560
-
-
... More
6'' PVC pipe (b-type)
270
-
-
... More
8'' PVC pipe (b-type)
90
-
-
... More
4'' PVC Collar
206
-
-
... More
6'' PVC Collar
64
-
-
... More
8'' PVC Collar
10
-
-
... More
4" PVC door junction
110
-
-
... More
4" PVC p-trap
90
-
-
... More
4" PVC floor trap
110
-
-
... More
4" PVC door bend
110
-
-
... More
4" x 6 " PVC door junction
110
-
-
... More
6'' PVC bend
21
-
-
... More
Providing and Fixing of Plumbing / Saintary items / Fixtures, of reputed make, incl carriage of all materials involved complete.
-
-
-
... More
15mm CP Brass Concealed stop cock.
70
-
-
... More
15mm CP Brass basin diverter.
20
-
-
... More
CP Brass Angle Value
259
-
-
... More
CP Brass 2 in 1 angle valve
90
-
-
... More
CP Brass 2 in 1 Bib cock
30
-
-
... More
CP Brass wall mixer
42
-
-
... More
CP Brass health Faucet with connections
90
-
-
... More
CP / PVC Grating with Anti cockroach trap
110
-
-
... More
CP / PVC Connection Pipe upto 24" long.
301
-
-
... More
CP Soap case
56
-
-
... More
CP waste pipe coupling
56
-
-
... More
CP towel road 600mm
56
-
-
... More
PVC Waste Pipe
56
-
-
... More
CP Seat water jet
56
-
-
... More
Union PPR 40 MM PPR
30
-
-
... More
Brass ball valve 40 mm
15
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 25mm OD(SDR-7.4)
1180
-
-
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 40mm OD(SDR-7.4)
550
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
42
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
42
-
-
... More
Providing , installation, commissioning and testing Hot water 25 ltr. Geyser of approved make (approved make ) incluidng fixing with bolts and making necessary connection.
36
-
-
... More
Providing , installation, commissioning and testing Hot water 50 ltr. Geyser of approved make (approved make ) incluidng fixing with bolts and making necessary connection.
6
-
-
... More
Providing and Fixing white vitreous china oval shaped wash basin excluding cost of fittings.
6
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: One urinal basin with 5 literwhite P.V.C automatic flushing cistern.
4
-
-
... More
Providing and Fixing P.V.C. low level flushing cistem with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixture complete:- 10 liter capacity-white.
6
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
38
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
5
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Stainless Steel AISI- 304 (18/8) Orissa pattern W.C. pan of size 585x480mm with flush pipe and integrated type foot rests
20
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm)
5.4
-
-
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :incl. refillings
32.4
-
-
... More
Clearance of Septic tank by way of Engagement of suckers for clearing, taking out all the slush, unhygienic material from the tanks and disposal of the same beyond Municipal limits complete.
2
-
-
... More
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered
excluding fixing accessories such as nuts, bolts, fasteners etc.).
75
-
-
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
12000
-
-
... More
Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-
(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.
(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.
(iii) Chlorination of RCC internal surface by liquid chlorine.
(iv) The treated surface shall be dried using air jetting and all loose
particles shall be removal from the surface.
(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge
142.08
-
-
... More
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead as per directions of Engineer-in-Charge: Rectangular manhole 90x80 cm and 45 cm deep
15
-
-
... More
Providing and fixing of Powder coated aluminum work for doors, windows, ventilators and partitios with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to 15: 733 and 15: 1285, fed with dash fastener of required dia. and size including necessary filling up of gaps at junctions ie, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling, C.P. brass/stainless steel screws, all hardware fittings and fixtures all complete as per directions of engineer-in-charge.
63
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw. 35mm thick.
22.5
-
-
... More
Comstruction of Brick Masonry manholes using 2nd class bricks in 1:6 mix including plastering / CI / RCC ready made frame with cover, complete job depth as per site requirement of following size.
-
-
-
... More
12"x12"
8
-
-
... More
18"x18"
8
-
-
... More
24"x24"
8
-
-
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
15
-
-
... More
Providing and fixing following ISI marked hardware fittings including necessary screws etc.
-
-
-
... More
Stainless Steel Butt Hinges 100x58x1.90mm
20
-
-
... More
Stainless Steel Butt Hinges 75x47x1.18mm
20
-
-
... More
Alumium tower bolts ISI market anodized 250x10mm
2
-
-
... More
Alumium tower bolts ISI market anodized 100x10mm
10
-
-
... More
Aluminum handles ISI marked anodized 125mm
10
-
-
... More
Aluminum habdles ISI marked anodized 75mm
10
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
10
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Kiln seasoned and chemically treated hollock wood / imported kail wood.
0.68
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned & chemically treated hollock wood / imported kail wood. 30mm thick.
22.3
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 4 mm thick glass pane (weighing not less than 10 kg/sqm)
9.75
-
-
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading
7.32
-
-
... More
Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture
44.61
-
-
... More
Development of Parking area and Face lifting of boundary wall with allied civil works at Sanat Ghar Bemina.
-
-
-
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles 10 mm to 25 mm.
865.75
-
-
... More
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix).
85.3
-
-
... More
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar incl. its disposal out side municipal limits.
15.2
-
-
... More
Demolishing RCC work by mechanical means & stockpiling at designated locations & disposal of dismantled materials upto a lead of 1 kilometer, stacking serviceable & unserviceable material separately including cutting reinforcement bars
4.5
-
-
... More
Engagement of Labours for cleaning the back side area and rubish material on parking side and near canteen side etc. including stacking of servicable material at site and dispossal of surplus material etc. complete
60
-
-
... More
Earth work in bulk excavation by mech means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
34.2
-
-
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
10.8
-
-
... More
Providing and Laying of dry soling, hand packed, incl. sand filling in voids in foundation including all leads, lifts and carriage head load etc. upto site of work complete.
13.05
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incl. all leads, lifts and carriage of material upto site of work).
14.2
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)incl. all leads, lifts and carriage of material upto site of work).
4.5
-
-
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) incl. all leads, lifts and carriage of material upto site of work).
4.5
-
-
... More
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
48.6
-
-
... More
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand)
incl carriage of all material involved complete.
288
-
-
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
30
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
830.35
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for: foundations/ footing, bases of columns etc.
32
-
-
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1471.48
-
-
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick.
1700.08
-
-
... More
Finishing walls with acrylic smooth exterior paint of required shade on
New work (Two or more coats applied @ 1.67 liter/10sqm over and
including priming coat of exterior primer applied @ 2.20kg/10sqm)
1733.83
-
-
... More
Steel work welded in built up sections/framed work, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
2424
-
-
... More
Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/ 10sqm of approved brand and manufacture.
505.28
-
-
... More
Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture.
439.2
-
-
... More
Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per directions of Engineer-in-charge ( the rate is inclusive of all materials and labours involved except scaffolding)
645
-
-
... More
Providing / Fixing of buji cladding tiles of 10-15mm thickness of approved make and shade over a base of cement mortar plaster 1:3 for levelling up incld. All leads lifts and carriage of material etc complete upto flooe v level.
54
-
-
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm). 18mm thick.
14.76
-
-
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: Red sand stone-exposed face fine dressed with rough backing 20mm thick for damaged windows sills.
33.75
-
-
... More
Repair / Modification of Aluminum composite Panel Cladding (ACP) and Front Porch area with allied civil works at Sanat Ghar Bemina.
-
-
-
... More
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet
48.6
-
-
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded.
623.7
-
-
... More
P/F high rib colour sheets of 0.5 mm thickness for roofing including hooks, bolts and nuts 8 mm diameter or with PVC impet washers complete up to any pitch in horizontal / vertical or curved surfaces including ridges or higs/ valley of 60 cm over all widtth of plain pre-coated sheets whenever required but excluding the cost of purlins and trussers and trussers and including cutting to size and shap whenever required.
56.16
-
-
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
480
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
82.2
-
-
... More
Providing and fixing double scaffolding system ( cup lock type ) on the exterior side of building/ structure, upto 25 mtrs height above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c, horizontal and vertical tubes joint with cup and lock system with M.s tube, M.S tubes Challis M.S clamps and stairs case system in the scaffolding for working platform etc. and maintaining it in a serviceable condition of execution of work of cleaning and/ or pointing and/or applying chemical and removing it their after the scaffolding system shall be stiffened with bracings, runners connecting with the building etc. where ever required. if feasible, for inspection of work at required location with essential safety features for the work men etc, complete as per directions and approval of Engineer-in-charge. Note: - 1) The elevational area of the scaffolding shall be measured for the payment purpose. 2) The Payment will be made once irrespective of duration of scaffolding. Note:- To be used for maintenance work judically necessary deduction for scaffolding in the existing item to be done..
1650
-
-
... More
Dismentalling of existing Acp Cladding at top near eaves boarding area and refixing the same in proper line after making / rectification necessary changes of acp cladding for fixing of rain gutters including cost of fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanized with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material &labour component, the cost of all mock ups at site etc. complete but excluding the cost of scaffolding.
285
-
-
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. With coloured glazed glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm).
7.2
-
-
... More
Providing and Fixing of colour coated rain gutters 150x100mm, 150mm wide 0.5mm wade 0.5mm thick incl. fixing with M.S. Clips and all fittings and fixtures, all cost and carriages, making necessary connections with rain water pipes complete.
115
-
-
... More
Providing and Fixing of 75mm dia PVC B-Type pipes with necessary fittings including PVC / Metallic clamps for rain water discharge from rain gutter from floor V-Level etc complete.
176
-
-
... More
Providing and Fixing of Bujj Cladding tiles of 10-15mm thickness of approved make and shade over a base of cement mortar plaster 1:3 for levelling up incld. All leads lifts and carriage of material etc complete upto floor V level.
54
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels granite of any colour or shade (Area of slab upto 0.5 sqm). 18mm thick.
14.76
-
-
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: Red sand stone- exposed face fine dressed with rough backing 20mm thick for damaged window sills.
33.75
-
-
... More
Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work as per existing design etc complete. Chaar phool.
6.24
-
-
... More
Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish.
28
-
-
... More
Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per directions of Engineer-in-charge ( the rate is inclusive of all materials and labours involved except scaffolding)
1645
-
-
... More
Providing and fixing of Powder coated aluminum work for doors, windows, ventilators and partitios with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to 15: 733 and 15: 1285, fed with dash fastener of required dia. and size including necessary filling up of gaps at junctions ie, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/panelling, C.P. brass/stainless steel screws, all hardware fittings and fixtures all complete as per directions.
33
-
-
... More
Construction of Wooden Security Gate Post at Sanat Ghar Bemina.
-
-
-
... More
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo.
1.27
-
-
... More
providing and fixing high rib colour coated sheets of 0.5mm thickness for roofing including hooks, bolts and nuts 8 mm dia meter or with PVC /NAILS. LIMPET washers complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. incl. ridges hips valleys.
9.66
-
-
... More
Providing and Fixingof 12 mm thick T&G planks made of imported wood (New Zealand pine or equivalent) for roof soffits & ceiling on wood work in false ceiling partitions sawn and put-up in position in budloo wood (Frame Work). Including cost of necessary adhesive & cost of nails etc. complete. incl. cost of nails / screws incl cost of / etc complete.
26.95
-
-
... More
PProviding and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface second class deodar wood 20mm thick..
44.79
-
-
... More
Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. With resin bonded fiber glass wool with density 24 kg/cum
26.95
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).
7.32
-
-
... More
Providing and fixing panelled or panelled and glazed shutters for doors,
windows and clerestory windows fixing with butt hinges of required size with
necessary screws, excluding panelling which will be paid for separately, all
complete as per direction of Engineer-in-charge. (Note: -Butt hinges and
necessary screws shall be paid separately). Kiln seasoned & chemically treated hollock wood 30mm thick.
1.67
-
-
... More
Providing and Fixing following ISI marked handware fittings including necessary screws etc. complete.
-
-
-
... More
Stainless Steel Butt Hinges 100x58x1.90mm
3
-
-
... More
Aluminum Tower bolts ISI marked anodized 250x10mm
2
-
-
... More
Aluminum 1-drop 250mm with lock
1
-
-
... More
Providing and fixing plained eaves boarding 2nd class kail wood 200-250x32 mm (nominal size).
42.67
-
-
... More
Providing and fixing double glazed hermetically sealed glazing in
aluminum windows, ventilators and partition etc. with 6mm thick clear
float glass both side having 12mm air gap including providing EPDM
gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete
2.01
-
-
... More
Varnishing with varnish of approved brand and manufacture:Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish.
40.32
-
-
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel welded.
84
-
-
... More
Development of Parking area and Face lifting and Restoration /Upgradation of washroom bwo electric works at Sanat Ghar Bemina.
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2X 1.5 sq.mm FRLS PVC insulated copper conductor (Havell/ Polycab/ Fenolex/Anchor eq. make) single core cable in surface/recessed medium class PVC conduit excluding the cost of conduit), with modular switch ((Anchor roma plus/Legrand /SSK NV/schneider make.), modular plate, suitable Gi box and earthing the point with 1.5 sq.mm FRLS PVC Insulated copper conductor single core cable etc. as required. The job also includes providing and laying of circuit wiring with 3x2.5 sqmm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/ Anchor make) single core cable in surface/recessed medium class PVC conduit excluding the cost of conduit) sample to be approved by Engineer-in-charge.
60
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm + 1X 4 sq. mm earth wire, FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit (Excluding the cost of conduit)
650
-
-
... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, modular plate, suitable Gl box, connections etc. as required. Modular Switch & Socket:-(( Anchor roma plus/Legrand Mylinc /SSK NV/schneider Livia / eq. make.
40
-
-
... More
Wiring for inverter circuits/6-10 amp power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor/equivalent as directed by engineer incharge.) single core cable in surface/recessed medium class PVC conduit, alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (excluding the cost of conduit
550
-
-
... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5-10 A modular socket outlet and 2 nos. 5-10 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Modular Switch & Socket:- (Anchor roma plus/Legrand Mylinc/SSK NV/schneider /ABB/ eq. make the sample to be got approved before installation at site.
40
-
-
... More
Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc.
40
-
-
... More
Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP M.C.B, "C" curve including connections, painting etc. Late as required
5
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Havell/Polycab/ Fenolex/Anchor eq.make.), single core cable in surface/ recessed (excluding the cost of conduit) medium class PVC conduit as required
-
-
-
... More
2 x 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
350
-
-
... More
2 x 10 sq. mm +1 X 6 sq. mm earth wire
60
-
-
... More
2 x 16 sq. mm + 1 x 6 sq. mm earth wire
60
-
-
... More
Supplying andFixing of following size of medium class PVC conduit (Anchor / Ravindra / Eq.make) along with accessories in surface / recee including cutting the wall and making good the same in case of recessed conduit as required, with cement plaster, wall putty, paint,complete.
-
-
-
... More
25MM
1250
-
-
... More
32MM
150
-
-
... More
Supply installation testing and commissioning of 18 W led Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95, THD 10%, CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years, which includes replacement of fixtures of Philips/ Wipro/Trulux make (sample to be approved before installation) / bajaj halonix eq. make / commercial type.
30
-
-
... More
S/F testing and comm. Of surface mounted LED Batten 20 watt-22 watt + 1 watt commercial series. (cool/warm) 4 ft. with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 THD10%,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V.The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/government of India. Philips/ Trulux / Wipro / Halonix/Bajaj /make. sample to be approved before installation.
15
-
-
... More
S/F testing and comm. Of MCB's (10K) of the below mentioned capacities in sub main controls legrand C curve/ Schinider/ L&T/ABB/equivalent make as directed by engineer in charge
-
-
-
... More
6-32 Amp SP MCB
40
-
-
... More
40-63 Amp SPN MCB
12
-
-
... More
Engaging of skilled labour for dismentalling of old/defunct material and also for carrying out other allied works
15
-
-
... More
Supply installation testing and comm. Of 200-250mm sweep exhaust fan Shutter type of havell /Bajaj/Crompton/equivalent make as directed by engineer incharge, including making of space in wall/ window as per site requirement and necessary connections.
10
-
-
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 No. Aluminium blades, 30 cm long down rod, 2nos, canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, and including iron hook complete. USHA Striker/ Havells Oyster matalic/Crompton aura / eq. make (sample to be approved before installation)
5
-
-
... More
Supply and fixing of 6 amp/250 V AC fan dimmer step type 2 module with cover plate (Anchor roma plus/Legrand /SSK /schneider ABB Tvisha make. Sample to be approved by Engineer in charge.
5
-
-
... More
Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,(legrand/ Shinider/ABB make) 240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator).
-
-
-
... More
6 Way, Double door (18+4)
2
-
-
... More
Supply fixing testing and comm. Of backlite holder /batten holder/angle holder/ceiling rose SSK/Anchor make incl. PVC Block.
20
-
-
... More
Providing of Chemical earthing as per IS standards by way of digging 10 deep pit then embedding 3 meter G.I Earthing electrode, 80mm dia connecting the plate with main control board/ floor panels by 10 SWG copper wire with 1/2" dia. Full thread brass nut and bolt and washers.
1
-
-
... More
Supply installation testing and comm. of flood light 50 W (warm, white ), Epoxy powder coated die-cast aluminium housing (LM24) with elegantly designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. PG9 gland is used for cable entry and provision for loopin-loopout class 1, IP66, IK 07,, with high power LED's as light source with Built-In Potted IP67 electronic LED driver with APFC,lower THD. toughned glass and secondary lens, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV With Built In SPD & other Safetytion, Surge Voltage Protection upto, IEC60598-1. Preferred make: Philips/Trulux/ Wipro /Halonix/Bajaj Eq.make.
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%