Public Works Department Tender

Providing and laying of cement concrete (1:5:10) using 40mm nominal size Nallah stone including curing but excluding the cost of centering and shuttering. All work upto plinth level Quantity = 26’x1’-6”x3” + 18’x2’x3’’ = 18.75 Cft = 0.53 Cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars of size 8mm, 10mm, for Plinth Tie Beams, Rafts, Rings, Ramp etc. 8mm bar = 52x3’ = 78’ = 46.32m@ 0.395 kg/m = 18.29 Kg 10mm bar = 28’x6 + (8’x10 +5’x16) + (10’x14 + 7’x20) = 608’ = 185.31m@ 0.617 kg/m = 113.78 Kg Steel wire for tying the rings and mesh = 2 kg Total Quantity = 134.07 Kg + 5% Extra = 140.77 Kg

Centring and shuttering including strutting, propping etc. and removal of form work for: 4.6.1 Foundations, footings, bases for columns Quantity = 2(26’x3’) + (8’x5’) = 196 Sft = 18.20 Sqm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m. Quantity = 2(26’x2’x3”) + (8’x5’x3”)= 66Cft = 1.86 Cum

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size Plinth = 26’x1’x3’ = 78Cft Raft = 8’x5’x6’’= 20Cft Slab = 10’x7’x6’’ = 35 Cft Total = 133Cft = 10.61 Cum

Cement concrete flooring and foundation as per the site requirement 1:2:4 (1 cement: 2 sand: 4 graded stone finished with a floating coat of neat cement including cement slurry but excluding the cost of noising of steps Complete 50mm thick 20 mm size stone aggregate. Total = 8’x5’ + 18’x2’ = 78 Sft = 7.24Sqm

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) Quantity = (18’x11’x9”) + (26’x2’-6’’x6”) – (7’x2’-6’’x9’’) – (2’-6’’x2’x9’’) = 164.125Cft = 4.64 Cum

12 mm cement plaster to plinth wall of mix 1:6 (1 cement: 6 fine sand) Total = 2 (26’x11’) +2(26’x2’-6’’) - 2(7’x2’-6’’) - 2(2’-6’’x2’) = 657 Sft = 61.03 Sqm

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) wth 3 Track window (1mx1.2m)–19 Nos., Door of size (1mx2.1m)–18 Nos, Door of size (0.76mx2.1m)–03 No., and Ventilaters of size (0.3mx0.3m)–02 Nos. as per Qty:- 20 Kg

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineering-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) as per Qty:- 3.5Sqm

Providing and fixing 12mm thick pre laminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides Qty:- 3.5Sft = 46.63 Sqm

Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides as per Qty:- 0.5 Sqm

Providing and fixing glass panes to windows, clerestory windows, ventilators including all allied accessories required for fitting of the glass panes etc

Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete of size 500x500mm. Floor area= 8’x5’ + 26’x1’ + 3’x3’ = 75Sft = 6.96Sqm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Wall area= 26’x7’ + 20’x9’’ + 10’x9’’ – 7’x2’-6’’ – 2’-6’’x2’ = 182S ft = 16.90 Sqm

Electrical fitting by way of Providing 15W LED Lights – 04 Nos, Job also includes Providing of laying of 1.5mm wire for light points, 4mm for Gyser, 5A switches-05 No’s, 5A sockets – 05 no’s, 15A sockets and switches – 02 no’s conduit etc along with allied electrical necessary fittings . P/F of 12’’ heavy duty exhaust fan of standard Make – 01 Nos., P/F of 25 Liters heavy duty Gyser of standard Make – 01 Nos. and other allied electrical fittings required to make the washroom functional. The job includes material cost labour cost and taxes.

P/F of sanitary fitting in Washroom P/F of CPVC pipe 1'',CPVC pipe 1.25'',female elbow 1''x 0.5 '',female tee 1''x 0.5 '',FTC 1''x 0.5'’, elbow 1 '' plain tee 1'', reducer 1''x1.25 '', socket 1.25'', socket 1'', Hooks plug 0.5'',solvent, tank nipple1.5'', 1.25''ballvalve, union TEE, 4''bend, 4'' x2.5''floortap, 2.5”TEE & bend, pipe4'',pipe2.5'',white water closet European W.C.pan with seat & lid, 10 ltr low level white PVC flushing cistern with flush pipe with with all fittings & fixtures-1No, C.P brass long bibcock, angle valves CP Cup,Hand jet, teflon tape PVC Connection/waste pipe, CP Jali plain/hole, mirror-1No. P/f of White corner wash basin size 12”-1No with all fittings & accessories, soap/Towel holder-2No. P/f of 4’’ CPVC water drain pipe from roof, CPVC 4’’ waste pipe in the washroom and other allied sanitary and plumbing accessories to make the washroom operational.

Painting by way of applying two coats of anti-corrosive superior quality metal primer and two coats of superior quality exterior paint on structural steel work. Job is inclusive of the cost of material, labour charges, transportation and all taxes etc.

Job charges for Carriage of sand, bazri, cement, stone, steel etc from a Distance of 35 km to the site of work by mech. Transport and manual means