Public Works Department Tender

Laying and jointing of 90 mm dia HDPE pipes through hot plate welding process as main pipe lines inside the already excavated trenches. The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator, fuel, necessary tools and tackes with all leads and lifts.

Installation,testing and commissioning of 75 mm dia HDPE elbows. The job includes welding of elbows through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per layout drawing .The job includes skilled labour, hot plate welding equipment, arrangement of power supply/ Generator, fuel, necessary tools and tackes with all leads and lifts.

Installation, testing and commissioning of 90 mm dia HDPE elbows. The job includes welding of elbows through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per layout drawing .The job includes skilled labour, hot plate welding equipment, arrangement of power supply/ Generator, fuel, necessary tools and tackes with all leads and lifts.

Installation, testing, and commissioning of 90 mm dia PN-10 HDPE TEEs. The job includes welding of TEEs through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per layout drawing.The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator with fuel, necessary tools and tackes with all leads and lifts.

Installation, testing, and commissioning of 75 mm dia HDPE TEEs. The job includes welding of TEEs through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per layout drawing.The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator with fuel, necessary tools and tackes with all leads and lifts.

Supply, Installation, testing and commissioning of (90x75) mm dia PN-10 HDPE Reducers. The job includes welding of Reducers through hot plate welding process with the HDPE main/sub-main pipe/HDPE risers and other requisite spots as per layout drawing.The job includes skilled labour, hot plate welding equipment, arrangement of power supply/Generator with fuel, necessary tools and tackes with all leads and lifts.

Installation, testing and commissioning of 75 mm x 32mm HDPE Service Saddle and Male Threaded Adaptor (MTA of 32mm Size) on HDPE Sub-main pipes at requisite spots as per layout drawing and and as per site requirement. The job includes skilled labour, drilling equipment/ necessary tools and tackes with all leads and lifts.

Installation,testing and commissioning of riser ( Nominal Dia 32mm) by way of cutting of LLDPE pipe of requisite lengths and connecting of risers with already fitted Male Threded Adapters on Sub Main pipe lines as per layout drawing and as per site requirement.

Supply, Installation, testing and commissioning of 65 mm dia Control valves including rubber washer on HDPE pipe (75mm dia) as sectional and isolation valves excluding the cost of Nuts and bolts. The control valves are to be installed as per the layout drawing and site requirement.

Installation, testing and commissioning of 80 mm dia Control valves including rubber washer on HDPE pipe (90mm dia) as sectional and isolation valves excluding the cost of Nuts and bolts. The control valves are to be installed as per the layout drawing and site requirement.

Installation,testing and commissioning of 75 mm dia HDPE Tail Piece by hot plate welding.

Supply, Installation and testing and commissioning of 75mm dia PN-10, HDPE Flange.

Installation, testing and commissioning of 90 mm dia HDPE Tail Piece by hot plate welding.

Installation,testing and commissioning of 90 mm dia HDPE Flange PN 10.

Providing and fitting of Nuts, bolts and washers of Assorted size. (Rate as per JKSOR 2022 Code: 10.22)

Installation,testing and commissioning of 75 mm dia Compression MTA alongwith threaded End cap (Flush Valve). The job also includes disengaging of the item and shifting to the safe storage after every use/ testing and repeating the same process for all 56 segments. Total quantity of the item to be issued to the bore well: 10 No.

Installation,testing and commissioning of 32 mm ND LLDPE pipe as lateral lines including 32 mm Compresson fittings like end caps, tee's, joiner, bends and Rotating Head Mini Sprinklers with MS risers, Vinyl tubings, stake assemblies for one complete Segment as per layout drawing. The job includes cutting, punching and laying of LLDPE Pipe as per site requirement and testing of one Segment for a period of minimum 30 minutes. Further the job includes dismanting and proper stacking of lateral lines (LLDPE pipe network) including compression fitting and sprinkler assembly after successful testing of one segment. Fuel for testing, necessary POLs, operation of D.G Set, Pumps (Submersible and Horizontal) and monitering of Pump house during operation is to be provided and arranged by the Firm. One segment of this Bore well Scheme consists of following items: 1. LLDPE Pipe = 306 m. 2. Sprinklers's =36 No. 3. Compression End Cap = 12 No. 4. Compression Tee = 6 No. 5. Compression Bends as per site requirement 6. Compression Joiner as per site requirement. 7. Mini Sprinklers (180 degree Rotation, Part Circle) as per site requirement Note: This Borewell scheme consists of 56 No. of Segments.

Providing of Sprinkler Irrigation equipment: Rotating Head Mini Sprinkler (Full Circle,360 degree rotation) for Bore-well no. (79) as per specification given in Annexure 'B'

Assembling of Head Unit inside Pump house of Bore well.

Installation, testing and commissioning of sand filter of capacity 20 m3/hr with back wash assembly including filling of filter media in head unit as per site requirment.

Installation, testing and commissioning of Hydro cyclone filter of capacity 20 m3/hr in head unit as per site requirment.

Installation, testing and commissioning of Screen filter of capacity 20 m3/hr in head unit as per site requirment.

Supply, Installation, testing, and commissioning of MS Fertilizer Tank of capacity 90 liters with fertilizer venturi injectors, coated with more than 70 micron thick colour epoxy powder from both inside and outside surface for protection against corrosion and weather effects, innovative turbulent inlet ensuring through mixing of chemicals/fertilizers , special drain port to flush the Tank, 200mm wide opening for easy pouring of stock solutions, high pressure hose assembly (inlet/ outlet connections), having working pressure not less than 2kg/cm2 .

Installation, testing and commissioning of 50mm dia Control valves including rubber washers for head unit excluding the cost of Nuts and bolts. The control valves are to be installed as per the site requirement.

Supply, Installation, testing and commissioning of Pressure Relief valve in head unit as per site requirement.

Installation, testing and commissioning of Air Release valve in head unit as per site requirement.

Installation, testing and commissioning of pressure gauge in head unit as per site requirement.

Installation,testing and commissioning of 25mm ball valve in head unit as per site requirement.

Providing, fitting and testing 50mm NB MS flange with 50mm NB GI Pipe and GI Bends for assembling various components of head unit as per site requirement.

Fitting of Departmental GI Nipple 50mmx100mm including cutting as per site requirement.

Providing, fitting/ welding and testing of 50mm Nominal Bore (Class B) GI Pipe for assembling various components of head unit as per site requirment.The job includes cost on account of welding, cutting, skilled labour etc. ( Rate as per JKSOR 2022 code: 19.6.6)

Providing, fitting and testing of required size 50mm NB GI Bend for assembling various components of head unit as per site requirment.The job includes cost on account of welding, cutting, skilled labour etc. as per site requirment.

Providing and fitting of 50mm NB Gun Metal Gate valve with C.I wheel of approved quality( Screw end) as per site requirement.(Rate as per JKSOR 2022 code: 19.11.4)

Providing and fitting of GI Nipple (25mmx150mm) as per site requirement.

Providing and fitting of GI Hose Nipple (20 x 50 mm) as per site requirement.

Providing, fitting and laying of 100 mm Nominal Bore (Class B) GI Pipe with fittings for sleeve to the exposed main/ envisaged road cuts. The sleeve is to be embedded in excavated trench as per the site requirement.(Rate as per JKSOR 2022 code: 19.6.9)

Video recording and phototgraphy of day to day activities during execution and testing of Saffron work as per site requirement. The firm shall provide vedio recordings/ still photographs of saffron work in a Fresh Pen drive of 8GB (01No.), including post card size colour printed copies of Geo tag photographs on photo paper (minimum 40No's).

Complete Round the Clock Watch and ward including Material Handling and Storage of all the material/inventory (both Departmental and Supplied by firm) at site during and after execution of work till its final handover/takeover with intending department (Agriculture Department).

Providing of Labour(Helper) for bundling, measuring/counting, stacking etc. at the time of final Handover/Takeover of Bore well to the indenting department(Agriculture Department) after testing and commissioning.

Carriage on account of return of excess/unused material from the Bore well site to the Divisional Store by the firm through proper reciept in a private Mini truck/pickup van arranged by the firm as and when required.

Bore-well yeild check/testing: The job includes through checking of the Electro-Mechanical (DG Set & Submersible pumping Unit) installed at the site and running of the equipment for a period of 03 hrs to check the yeild of the Bore-well. (The job includes the cost of HSD required and its carriage to the site)

Multistage Horizontal Pumping Unit and allied works

Supply, Installation, Testing and Commissioning of Horizontal end suction pumping unit coupled with suitable capacity motor, Discharge: 19.26 m3/hr and Head: 58m for Bore well No.79 (wuyan, District :Pulwama), including: 1. MS Base Frame 2. Coupling (MS & TC) 3. Anti vibration pads

Providing and laying of cement conrete foundation block for pumping equipments of dimension not less than 6'*2'*1' (as per site requirement) in the ratio of 1:2:4 (1 cement : 2 coarse sand: 4 stone aggregate of 20mm nominal size). The job also includes s shuttering, centering.

Supply, Fitting, Testing & commissioning of flanged G.I "B" Class suction/ delivery pipe of size 80 mm along with washers, nuts and bolts (3m length pipe each for suction and delivery).

Providing and fixing CI NRV 80mm of approved quality.

Supply, Fitting, Testing, and commissioning of 80 mm flanged GI bends (JKSOR 2022 Code: 1584) (02 no. of bends)

Supply, Fitting, Testing, and commissioning of flanged reducer 80x50mm including washers, nuts and bolts as per site requirement. (02 no. of reducers)

Supply, Installation, testing, and commissioning of PVC Priming Tank of 200 ltr capacity ISI : 12701 marked, including all fittings for 20mm pipe such as GI Nipples(20mm 100mm long, 04 No.), ball valve( gun metal 20mm, 02 No), Bends (20mm, 06No.), GI Piping (20mm, 15m Length ) , Sockets(20mm, 6No.) union (20mm 04 No.) etc and MS stand on which above mentioned Tank can rest (fabricated out of ISA 35x35x5 of minimum height 5' ) Connection of priming tank with the delivery of submersible pumping unit by way of providing and fitting 20mm GI pipe (heavy) and with the delievery of Horizontal Pumping unit by necessary welding and using sockets/nipples as required.The length of the pipe is approximately 15m.

Supply, Fitting, Testing and commissioning of 3core 16 sq. mm copper submersible cable. Including copper thimbles as per site required (20m cable)