Public Works Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Building Construction
Eprocure
Opening Date28 Feb 2025
Closing Date20 Mar 2025
Tender Amount₹ 11,82,62,000
Costs
EMD
₹ 23,65,240Document Cost
₹ 6,000Tender Fee
Refer Documents
Summary
Construction Of District Hospital At Reasi Phase Ii Residential Quarters, Paramedical Quarters
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_PWDJK_273395_1Tender No
e-NIT No. 07 of 2024-25 Dated 28.02.2025Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed
180
4419
795573
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All work upto plinth level.
425
7192
3056621.25
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) All works upto plinth level
10
7091
70916
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M.
1513.6
198
300752.32
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.
273.73
787
215535
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All work above plinth level upto floor V level.
805
8457
6808086.25
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
0.66
8953
5909.61
... More
Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars. (Thermo-Mechanically Treated bars of grade Fe-500D or more.)
250900
79
19883825
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :- Foundations, footings, bases of columns.
1270.86
262
333346.58
... More
Columns, pillars, piers.
1424.89
680
969138.93
... More
Lintels, beams, plinth beams.
2181.28
502
1096856.65
... More
Suspended floors, roofs, landings and access platforms.
2494.32
635
1585389.79
... More
Edges of slabs and breaks in floors and walls upto 20cm wide.
652.03
242
157986.87
... More
Weather shades, chajjas, corbels etc. including edges.
179.53
979
175768.85
... More
Wall (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc
590.42
573
338812.52
... More
Stairs (excluding landings) except spiral stair cases.
140.62
807
113550.65
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1 mtr. of part thereof (Plan area to be measured). Suspended floors, roofs landing, beams and balconies (Plan area to be measured).
793.94
267
212458.34
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
126.38
4943
624746.89
... More
Providing and laying DPC 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) and curing complete.
69.93
372
26073.4
... More
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
69.93
136
9569.92
... More
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 fine sand).(Below Plinth upto Plinth level)
32.68
6501
212459.22
... More
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:6 (1 cement : 6 fine sand).
786.84
6183
4865621.85
... More
Extra for brick work in super structure above plinth level upto floor V-level.
786.84
1323
1041500.77
... More
Half brick masonry with bricks of class designation 75 in foundation, plinth and superstructure upto floor V-level in cement mortar 1:4 (1 cement : 4 coarse sand).
810.05
785
636375.28
... More
Extra for half brick work in super structure above plinth level upto floor V-level.
810.05
145
117619.26
... More
Extra for providing and placing in position 2 Nos 6mm dia M.S Bars at every third course of half brick masonary .
810.05
74
60551.24
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
2448.27
221
542291.81
... More
Smooth finishing of the exposed surface of RCC work (Column&Beam) with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing.
686.06
221
151962.29
... More
12mm cement plaster of mix 1:6 (1 cement : 6 fine sand).
5134.5
241
1241265.38
... More
15mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand).
5670.74
278
1579868.16
... More
Making of grove 12mm x 10mm between brick and RCC.
1134.33
10
11343.3
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size below flooring, retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing.
107.8
4112
443332.89
... More
Add or deduct for plaster drip coarse / groove in plastered surface of moulding to RCC projections.
1121.65
56
63204.98
... More
Making plinth protection 50mm thick cement concrete 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth crushed.
226.12
496
112302.5
... More
Brick edging 7 cm wide 11.4cm deep to plinth protection with bricks of class designation 75mm including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
330.38
53
17774.44
... More
Providing and laying integral cement based water proofing treatment including preparation of surfaces as required for treatment of roofs, balconies, terraces etc. (Make Armocreate of SWC Chryso France) consisting of (a) applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining was upto 300mm height including rounding of junction of walls and slaps.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg / sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (iv) Finishing the surface with 20mm thick joint less cement mortar of mix 1: 4 admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm / sq 3mm deep. (e) The whole terrace so finished shall be flooded with water far a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by Engineer-in-charge. With average thickness of 120mm and minimum thickness at khurras as 65mm.
1881.8
1295
2437307.36
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
32
247
7913.6
... More
Providing and laying water proofing treatment (Make Armocreate of SWC Chryso France) to vertical and horizontal surface of depressed portions of W.C., kitchen and the consisting of (i) Ist course of applying cement slurry @ 4.4 kg /sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding of junctions of vertical and horizontal surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surface. (iii) III course of applying blown or / residual bitumen applied hot at 1.7 kg per sqm of area. (iv) Ivth course of 400 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm.
196.65
700
137714
... More
Providing and laying vitrified floor tiles in different sizes Size of tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete job
2140.28
1482
3171894.96
... More
62mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 liter per 50kg of cement or as per manufacturer’s specifications, including cost of cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
55.32
796
44084.51
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
102.01
3576
364854.07
... More
Providing and laying 16mm thick Granite of any colour and shape (area of slab over 0.5 Sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.
39.36
3836
151018.42
... More
Extra for providing edge moulding to 16 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
56.58
432
24459.53
... More
Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.
19
707
13451.05
... More
Providing and laying Ceramic glazed floor tiles (NON-SKIDD)300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
221.01
1052
232668.28
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete..
1271.48
1161
1476251.85
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) sal wood
61.49
140082
8613669.85
... More
Providing & fixing glazed shutters 35mm thick for doors, windows and clear story windows using 10Kg/Sqm (4mm thick) glass panes including stainless steel but hinges of size 75mm x 62mm x 2mm of make Kitch, Arch, Blum with necessary stainless screws in second class deodar wood.
140.69
4534
637944.74
... More
Providing and fixing 35mm thick wire gauze shutters using galvanized M.S. wire gauge of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws in second class deodar wood.
137.53
4368
600731.04
... More
Providing and fixing of glass panes weighing 12.50 kg/sqm (5.0mm thick) with deodar wood fillets.
97.3
1549
150751.76
... More
Providing and fixing of block door shutters in pine wood filling 35mm thick and finished with 1mm thick laminated on both sides. Door held with 4 no. S.S but hinges with necessary S.S screws as per directions of Engineer-in-charge with deodar wood beading of 4mm x 37mm section all around door with all necessary fittings Complete job
462.64
3600
1665504
... More
Applying priming coat:ith ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
668.36
59
39767.42
... More
Providing and fixing wooden moulded beading to door and window frames with S.S screws, plugs and on unexposed surface etc. complete:2nd class teak wood 50 x 20 mm
1063.75
264
281095.94
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). (HILTI :- NUTS AND BOLTS)
1530
163
249466.5
... More
Providing and fixing aluminium tower bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 100x10mm.
192
57
11011.2
... More
150x10mm.
612
80
49174.2
... More
200x10mm.
392
89
34966.4
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125MM
310
94
29202
... More
100mm.
438
69
30419.1
... More
Providing and fixing aluminium sliding door bolts ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 300x16mm.
45
292
13176
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
117
712
83415.15
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Twin rubber stopper.
205
62
12833
... More
Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.100x60x2.50 mm
711
67
48099.15
... More
Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges (heavy weight) with Stainless Steel screws etc. complete.75x50x2.50 mm
980
54
53312
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :
125
1482
185306.25
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single socketed pipes of 110mm diameter.
312.96
354
111038.21
... More
Providing and fixing on wall face unplasticised-PVC moulded fitting / accessories for unplasticised- rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion :-Coupler 110mm.
38
169
6441
... More
Single tee with door 110 x 110 x 110mm.
38
245
9332.8
... More
Bend 87.5* 110mm.
38
178
6796.3
... More
P/F stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc, including welded, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.
1050.46
650
683271.71
... More
Providing and fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. including priming coat with approve steel primer all complete (fixed to openings/wooden frames with rawl plugs, screws etc.).
2750
179
494725
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube
2500
172
432250
... More
Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new work (STEEL WORK).
241.76
121
29482.63
... More
Painting with synthetic enamel paint of approved brand and manufacture to give and even shade two or more coats on new work (Wood work).
668.36
121
81506.5
... More
Providing and fixing chromium plated 20MM dia brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
382.47
295
112828.65
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacture,over the plasterted wall surface to prepare the surface even and smooth complete
13435.77
129
1739932.22
... More
Finishing wall with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/10 sqm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm)
2869.56
165
475629.57
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
1806.4
228
412852.72
... More
Providing and fixing Fabric vertical /roller blinds as per Design and concept as per direction of Consultant approval .
55.77
1600
89232
... More
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.
8759.81
127
1116437.79
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
9451.07
59
560921.01
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover
39.23
3238
127034.59
... More
Providing and fixing ball bearing for rolling shutters.
4
483
1932.4
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
409.17
770
315306.4
... More
Fine dressing of the ground
6
340
2045.1
... More
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
360
33
12114
... More
Provision for trees at height of 6ft of Green Bottle Palm Tree,
50
1500
75000
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
203.84
1526
311253.49
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). 8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
224.26
1878
421193.92
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kind of Soil
2756
188
520195
... More
Handpacking of stones in wire crates excluding cost of crates and stones
4579.2
337
1545251.04
... More
Handpacking sone filling behind the crate wall including cost of nallah stone
1081
216
233928.4
... More
Cost of Crates (LMR)
530
5600
2968000
... More
Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete Sand for an average lead of 25 Kms.
640.77
393
251835.43
... More
Stone aggregate below 40mm size for an average lead of 15 Kms.
1023.13
297
303890.07
... More
Stone aggregate 40mm and above 40mm size for an average lead of 15 Kms.
154.04
322
49733.35
... More
Bricks for an average lead of 80 Kms
428433.12
2
993964.84
... More
Carriage of stone from Avg. Distance of 10 km.
4579.2
287
1315695.74
... More
PLUMBING Providing & fixing of white vitreous China pedestial type water closet (European Type) with cistern (Essel Cat No 76021011 + Flush Tank 402201 / Kerovit model No. 112 and flush tank model no. 1001/ Euronics Cat No CO22-WC /DFT-D01) with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with Rubber Lip / Buffer and side gap filled with silicon sealant wherever required. Including brass / SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of Engineer-in-charge.
30
9000
270000
... More
Providing & fixing of white vitreous china wash basin with pedestal(Essel Cat No 72001170 Pedestal 72011121/ Euronics Cat NoC015-WB/ Kerovit cat No ) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Essel 301307 Euronics-EBT32-CP Bottle Trap approved equivalent), 450mm long CP copper connections pipes , wall flanges and rubber adapters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer-Incharge.
28
3000
84000
... More
Providing and fixing of C.P. brass Central Hole Basin Mixer/ Table top Mixer without Popup Waste System including with 450mm Long Copper Pipes & Brass Nuts with all fittings and accessories as per direction of Engineer-Incharge. (Essel Cat No 113001 /Euronics Cat No RIV-1002R / Kerovit make Cat No. 1511010-ND-CP).
28
3500
98000
... More
Providing & fixing C.P. hand spray with lever control (health faucet) (Essel Cat No 309011 /Euronics Cat. No. EHF05-CP / Kerovit make KA580001) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects as per direction of Engineer-Incharge.
30
1700
51000
... More
Providing and fixing stainless steel A ISI 304 (18''X36''X8''(with drain board )kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board 510 x 1040mm bowl depth 225mm (Dry Canteen/Kitchen).
15
12371
185565
... More
Providing and fixing, testing and commissioning of C.P brass Sink mixer with regular swinging spout (wall mounted model) with connecting legs and wall flanges complete as required and making good as per direction of Engineer-in-charge (Essel Cat No 113069 /EuronicsCat No. RIV-1013r, Kerovit KB2011024).
15
3500
52500
... More
Providing and fixing C.P./ S.S brass Nipple for all acessorie points of approved quality
350
50
17500
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore (Make Essel Cat No 113052 /Euronics EAV01 / Kerovit make Cat No. KB 1511003).
350
1200
420000
... More
Providing & fixing C.P. brass robe hook (Essel Cat No 111026 /Euronics Cat No.ACC05 /Kerovit Cat No. 660003) or approved equivalent) fixed to wall/door with plastic rawl plugs and C.P brass screws including cutting and making good the walls wherever required as per direction of Engineer-Incharge.
30
500
15000
... More
Providing & fixing recessed liquid soap dispenser (Essel Cat No 128036/ Euronics Cat No. ES11/Kerovit Cat No. 930009) as per direction of Engineer-Incharge.
30
3200
96000
... More
P/F of Soap Dish Holder with all fittings as per direction of Engineer-in-charge (Essel Cat No 111024 /Euronics Cat No. ACC01 Kerovit Cat No KA 680004).
30
900
27000
... More
Providing and fixing Bottle Trap ( Essel Cat No 301307 /Euronics Cat No EBT32 CP/ Kerovit cat no KA87002-RG) and other ancillary fittings. Cutting and making good the walls wherever required compete as per directions of Engineer-Incharge.
30
1600
48000
... More
Providing and fixing 6mm copper backed float glass mirror MODI / SAINT-GOBAIN including 6mm thick BWR type ply board, 40mm stainless steel channel plugged to wall, hard wood treated with two coats of wood preservative, etc. all complete as specified and shown in drawing complete to the satisfaction of Engineer in charge.
10.17
2300
23391
... More
Providing and fixing brass towel Ring Round with Round Flenge of approved make complete with all fittings (Essel Cat No 140023/ Euroonics Cat No. ACC03 or equivalent).
30
900
27000
... More
P/F of glass shelf 600mm long with all C.P fittings of approved quality complete item (Essel Cat No.124030 / Kerovit Cat No KA 930005).
30
1800
54000
... More
Providing and fixing 15 mm dia. C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (Short Body) (Make Essel Cat No 113145/ Euronics Cat No.RIV 1010RKerovit Cat No. KB 2011004)
60
1400
84000
... More
Providing and fixing heavy class SS grating plane floor trap and setting in floor with cement mortar to matach the floor finish as per direction of Engineer-in-charge (size 100mm dia) ISI marked.
230
350
80500
... More
Providing & fixing waste coupling for wash basin and sink, of approved quality and colour:- Waste Coupling 32mm size full thread with 80mm height (Essel Cat No 301304 /Euronics Cat No. EWC03F-CP/ Kerovit cat No KA87003)
30
550
16500
... More
Providing and fixing concealed body for single lever diverter 40mm cartridge with button assembly , cartridge sleeve (button on top ) but without exposed parts. Complete job . (Essel Cat No 180105/Kerovit Cat No. KA2011035/ Euronics cat no AL004D).
30
3250
97500
... More
Providing and fixing Ornamix prime bathtub spout with wall flange. Complete job . Essel cat no31007/Euronics Cat No. RIV-1008R/ KEROVIT CAT NO KB2111016).
30
1750
52500
... More
Providing and fixing single lever exposed parts kit of diverter consisting of operating lever , wall flange, with seal & button only (Compatable with item No.( Essel 180105 / ALD 065N). Complete job . (Essel Cat No 113004 /Euronics Cat No. FLO3016AQ/ Kerovit Cat no KB2011037).
30
1450
43500
... More
Providing, storing, handling, shifting, installation, testing & commissioning of vertical / horizontal storage type hot water heater fixed to wall with anchor bolts & nuts, 20mm CP brass cock and 20mm non return valve complete including making connection with 15 mm dia CP connecting pipe on Inlet and Outlet, suitable length of power cable and 15A plough (for pantry & Toilets). (Make : Hindware, Bajaj or equivalent)Capacity 10 liters
20
8000
160000
... More
Capacity 25 liters
19
14238
270522
... More
Providing and fixing of wall mounted over head shower 200m dia ( Essel Cat No 303008 /Jaquar DHS-CHR-1613) with shower arm 450mm long round shape with 90 degree bend with flanges (Essel Cat No 306318 /Jaquar SHA-479L450 or approved equivalent) with all fittings.
22
4400
96800
... More
Providing & fixing white vitreous china flat back urinal with automatic flushing systems (Hindware 60021 / Kerovit model No. KS 510) comprising of all plumbing, electronic and electrical items. CP brass flush pipe with CP brass elbow, CP brass spreader, CP wall flange, infrared photo cells, eyes electrically operated solenoid valve, step down transformer / equipment and any other item required to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing complete as mentioned above as per direction of Engineer-Incharge.
2
8000
16000
... More
Providing & fixing storage type water cooler with plain & cold water facility of the following capacity, I.S.I marked, stainless steel front panel, C.P brass push cock, inlet float valve with all plumbing and electrical accessories, inlet, outlet, overflow and PVC drain out connection to F.D complete as required (Blue Star or equivalent).Cooling capacity 20 Ltrs./hr (Model No. Bluestar PC240). Storage capacity 40 Ltrs.
2
30767
61535.42
... More
Providing & fixing commercial 10 LPH water purifier of required capacity. Including all components as per manufacture specifications, including connection from water supply line, and final connection to water cooler electric wiring & plug top etc. with all accessories.
2
20365
40730
... More
SUB HEAD - II : WATER SUPPLY. Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL-PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge:( Make : Kitec, Vista, Prayag,Supreme,)Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc., C 1216 (16mm OD) pipe.
810
463
375394.5
... More
1620 (20mm OD) pipe.
560
505
283136
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. Including with all Necessary ISI fittings & Acessories Complete job. Make ( Make : Kitec, Vista,Gebrat Prayag,Supreme,) INTERNAL WORK- Exposed on wall 15 mm dia. nominal bore (Medium class-C)
150
300
45060
... More
20 mm dia. nominal bore (Medium class-C)
250
360
90212.5
... More
25 mm dia. nominal bore (Medium class-C)
420
469
197316
... More
32 mm dia. nominal bore (Medium class-C)
510
562
286696.5
... More
40 mm dia. nominal bore (Medium class-C)
210
669
140532
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etcIncluding with all Necessary ISI fittings & Acessories Complete job.Make ( Make : Kitec, Vista, Gebrat , Prayag, Supreme,)(.External work) 32 mm dia. nominal bore (Medium class-C)
670
360
241803
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete copatable to connection with composite pipe (make :Rehau / Kitech/gebbrat/Prayag )15 mm nominal bore
17
438
7460.45
... More
20 mm nominal bore
17
483
8212.7
... More
25 mm nominal bore
15
526
7890.75
... More
32 mm dia. Nominal bore
15
1277
19155
... More
40 mm dia. Nominal bore
18
2983
53694
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore
100
666
66625
... More
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.20 mm dia
20
573
11460
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 32 mm nominal bore
20
617
12356
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for
new work.15 mm diameter pipe.
150
15
2377.5
... More
20 mm diameter pipe.
250
18
4712.5
... More
25 mm diameter pipe.
420
24
10374
... More
32 mm diameter pipe.
1180
29
34751
... More
40 mm diameter pipe.
210
34
7297.5
... More
SUB HEAD - III : DRAINAGE SYSTEM Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kind of soil
80
252
20176
... More
Providing and fixing on wall face unplasticised-Rigid PVC pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. r.MAKE Supreme, asirwad, prince,jain with. All necessary fittings and Accessories as per the Direction of Engineer Incharge.75MM dia
140
216
30324
... More
110MM dia
560
354
198688
... More
150MM dia
360
516
185868
... More
Construction brick measonery man hole in cement motor 1:4 (1 cement: 4 Coarse Sand) R.C.C top slab with 1:2:4 mix (1 cement: 2 Coarse Sand: 4 graded stone aggrigate 20 mm nominal size) foundation concrete aggrigate 40 mm Nominal Size, in side palstering 12mm thick with cement mortor 1:3 (1 cement:3 Coarse sand) finshed with floating coat near cement and making channels in cement concrete 1:2:4 (1 cement:2 Coarse snad:4 graded stone aggirgate 20mm nominal size) finished with floating coat of neat cement complete as per standard design. inside size 90cmx80cm and 45cm deep including cast iron cover with frame (light duty) 455x610mm internal dimensionals. total wt. of cover and frame to be not less than 38kg (wt. of cover 33kg and wt.of frame 15kg) with F.P.S bricks of class designation 75 (crush stone aggrigate).
21
9820
206239.95
... More
Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. (With F.P.S. bricks)
21
8906
187034.4
... More
Providing and fixing heavy class SS grating plane including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge (Size 100 mm dia) (ISI Marked)
100
250
25000
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license) (1000 ltr. Capacity 15 No.). MAKE (PRAYAG)
60000
11
675000
... More
Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.
11
20694
227642.8
... More
SUB HEAD - WATER SUPPLY, DRAINAGE, PUMPS & EQUIPMENT Supply, assembly, erection, testing and commissioning of pumping system comprising the following:Vertical/Horizontal centrifugal pumps (1 Working ) with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, Single phase, 50 cycles A.C. supply with 80/ 80 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) (Make:- Crompton,Wilo, Ebara and Matherplatt etc.) Model MBQ32(1PH)-15, Capacity 3 H.P, Suction -80mm x Delivery 80mm (1 working ) (Domestic water relift pump).
5
22750
113750
... More
LIFTS Design, Supply, Installation, Testing and Commissioning of one No. 08 passenger (544 kg) Stainless Steel moon light finish/ hair line finish/ moon rock finish Elevator of machine room type with following specifications:Make: ThyssenKrupp/Kone/OTIS/Mitsubishi/Fujitec India/Schindler/Hitachi.Operation/Control: Microprocessor based simplex selective Collective with / without attendant.Travel: 3 stops & 3 openings (G+2). Speed: 1 m/s. Bottom Pit Depth: 1600 mm (approx)Controller: Micro-Processer based AC variable voltage & variable frequency drive (AC VVVF)Car/Doors: Stainless Steel Scratch proof with hair line finish with fire rating and side opening doors.Door opening: 800 mm (width) x 2000mm (height) with fire rating as per recommended norms.Machine: Gearless type.Car size: 1100mm (wide) x 1300mm(deep)x 2200mm (high)Hoist way/Lift Well Size:Available: 1880 mm(wide)x 1800 mm(deep)Leveling: A separate level device for automatic leveling with leveling accuracy of ± 2 mm shall be incorporated Power Supply: 415 ± 1 % volts, 3 phase, 50 Hz . Accessories: Automatic Rescue device (ARD), During event of power failure or blackout in building, this device automatically moves and stops at the nearest floor or door then open to ensure any onboard passenger safety.Digital LED displays, Alarm should be battery operated, automatic operation for car fan, adjustable door open time, anti-nuisance (empty car), anti-nuisance (car call cancellation at direction reversal), blower fan in car for ventilation, braille on push buttons, VF regenerative (closed loop), traction media: coated steel belt/roop, door closing retries, door nudging, emergency light, infra-red screen for car door, Intercom, Jammed landing operating panel call button by-pass, motor overheat protection, overload function with audio-visual indication in car operating panel, phase failure and phase reversal protection, attendant control, fireman control, fireman emergency return, lift announcement system.Car Enclosure: Constructed out of Stainless-Steel hairline scratch proof finish.Flooring: Platform lined with anti-skid flooring. Lighting & Electric work : Job includes providing and fitting of 10W LED Bulk Head Fitting and 16 A Power Socket at every 10 ft throughout the shaft. Ceiling fan, exhaust fan and lighting in control room along with Required Size of Distribution Board and Incomer,Outgoing MCb's.Civil Work: Job includes all kind of minor civil works required for installation of lift. Cleaning of site/debris before and after execution of work. Supply Cable: Providing, laying, testing and commissioning of aluminium armored cable PVC insulated 50m(approx.) length of suitable size as per the recommendation of lift manufacturer confirming to relevant IS code 7098 Part-1 with Latest amendment up to date of some standard ISI mark from main electric panel to lift control room at top level. Complete job including labour, taxes, transportation etc.Earthing:- Suitable chemical earthing to the lift motor & panel by way of excavation of pit of proper size upto a depth of 03 meter, copper electrode in hard and soft soil followed by filling of required quantity of earthing chemical for each electrode. Job includes filling of pit with excavated soil and fitment of copper electrode with copper strips.(02 Nos)Any work/items not mentioned in the scope of work but deemed necessary for completion and commissioning of this project shall deemed to be included in the scope of work. Job on Turnkey Basis. Complete job including cost of labour (skilled & unskilled), crane, scaffolding, taxes, transportation etc.
1
1600000
1600000
... More
ANNEXURE "D"- MODULAR OPERATION THEATRE Two Bay Surgeon Scrub with all around support to reduce resonance of water jet : 2bay wash basin made of Stainless Steel with sensors. Sink will be openable front section to provide service access, each unit with two taps, Two soap dispenser with all around support to reduce resonance of water jet.Two Bay Surgeon Scrub will be CE certified. Make:- (CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE OR EQUIVALENT
6
100300
601800
... More
Supply, Installation, Testing and commissioning of Ceiling Panels System for Modular Operation Theatre designed and constructed for exact size, easy field installation. The pre fabricated OT should be constructed from puff insulated in PPGI material. These panels are produced in double band laminator in which PPGI sheets of thickness of 0.8. mm is used on both sides. The core should consists of rigid polyurethane foam, which has been injected under high pressure, with a minimum density of 40kg/m3 .The construction shall be of single wall type. The Total thickness of Panels is 50mm Ceiling Panel System should be CE certified. Makes:- JSW Jindal/Tata, or equivalent
112.47
6318
710585.46
... More
Supply and Installation and Commissioning of 2.00 mm thick CONDUCTIVE ESD tiles of size 615 mm x 615mm as per EN 427.(Imported) The tiles are manufactured from PVC chips coated with a conductive substance. The tiles should offer guarantee a longlife conductivity independently from humidity and temperature. Tiles should be highly compressed with a compact surface. These conductive tiles should be completly free from volatile antistatic chemicals, and ensures a permanent and stable conductive performance of the floor over its entire life time. For cleanroom application tiles should satisfy the strictest requirements for paricle release behaviour, helping to reduce any threat of contamination certified by Fraunhofer IPA Institute in Germany. The compact, pore-free surface should be unfreindly to bacteria and moulds to maintain highest standards of hygiene. The seams between the tiles shall be hot welded using the same base material of tiles so that a true material cohesion between the tiles can be produced. The welding / seaming shall be done using hot air welding machine. The Electrical Resistance offered by the tiles is as per IEC 61340-4-1, EN 1081(100v) ANSI/ESD 7.1. The laying of Copper tape and conductive addhesive has to be laid before the tiles are laid Conductive Flooring will be CE certified. Make: Tarket / Gerflor / Polyfloor/ Armstrong
123.49
3776
466298.24
... More
Supplying, Installation, Testing and Commissioning of wall Panels System for Operation Theatre designed and Constructed for Extra size easy field installation. The pre fabricated Operation Theatre should be constructed from '' Puff '' Insulated in PPGI material. These panels are produced in double band laminator in which PPGI Sheets of thickness of 0.8 mm is used on both sides. The core should consists of rigid Polyurethane foam, which has been injected under high pressure, with a minimum density of 40KG/m3. The Construction shall be of single wall type . the total thickness of panels is 50mm Celing panel System should be CE certified. Makes:- JSW Jindal/Tata or equivalent (3 NO O.T)
257.16
6490
1668968.4
... More
Two Plate Viewing screen for non dazzling diagnostic use with flicker free and variable control range of luminous density control range approx. 90% viewing size. Each bank will be with individual dimming. LED Dimmable X-Ray will be CE certified. MAKE -(CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE OR EQUIVALENT
3
29500
88500
... More
Pressure Relief Dampers having multi 304 graded stainless steel blades for maintaining the positive pressure inside the operation theatre . Pressure Relief Dampers will be CE certified. MAKE-(CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE OR EQUIVALENT
3
20060
60180
... More
Operating Writing List Board Ceramic Size (948mm x 648mm ).Operating Writing List Board will be CE certified. MAKE-(CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE OR EQUIVALENT
3
20060
60180
... More
Double Arm Moveable Pendant will have 1000mm + 800 mm arms with Horizontal movement having load carrying capacity of 150kgs. The arm will be rotated upto 330degree to 340 degree . Pendant will have one arm with two shelves as per points : 1) 5/15 Amp Electrical sockets without switches - 8 to 10 nos., 2) shelfs with side rails - 2 nos. 3) Provision to fix 6 Nos Gas Outlets. - Make: (CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE or Equivalent
3
224200
672600
... More
Surgeon Pandant: Providing & fixing of double arm multi moveable surgical pendant with load carrying capacity of 100Kg and rotational values of 330-340 degree with adjustable stopper ( Friction Brake). The pendent shall be designed with service head to host, base, gas module, electric modular and shelves upto 8 gas outlets & 8 Electrical switches, I.V. Pole and S.S. 304 Basket . 2 Racks & 1 Shelf shall be provided to mount the equipments like monitor etc. The anesthesia pendent shall have mounting base for Vacuum jars. The pendent shall also have an RJ-45 port for networking interface. Material of construction would be Extruded aluminium with powder and anti bacterial coating. Make: (CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE or Equivalent
3
172280
516840
... More
Manual Swing Door System: Supply, installation, testing & commissioning of manual sealed swing door made out of HPL, viewing window 300 x 300mm. Size of the door : 1500 x 2100 mm (W x H). MAKE: (CE Marked) PES, AISHMED, DIYA HEALTHCARE, SMM HEALTHCARE OR EQUIVALENT
3
84960
254880
... More
Manual Swing Door System inside OT: Supply, installation, testing & commissioning of manual sealed swing door made out of HPL, viewing window 300 x 300mm. Size of the door : 750-1170 mm X 1800-2400MM (W x H). Make: (CE Marked) PES, AISHMED , DIYA HEALTHCARE, SMM HEALTHCARE OR EQUIVALENT
3
84960
254880
... More
Planair ceiling (plenum box - air diffuser)- (cladding type OT) duly CE Marked as per technical specification
3
225000
675000
... More
Hatch Box
3
75000
225000
... More
Single Arm Ceiling Pendent for the O.T.( Indian ) CE marked as per technical specification.
3
125000
375000
... More
Double combination OT ceiling light with LED Technology- Indian as per tender technical specification enclosed
3
440000
1320000
... More
Electro Mechnical Table OT Table
3
475000
1425000
... More
Medical copper pipe (BS EN 13348) inside the Modular Operation Theatre only
3
105000
315000
... More
AHU system with condensing unit package
3
575000
1725000
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. as required.
Group B
421
1182
497622
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable etc. as required.
Group C
419
1467
614673
... More
Wiring for Light /Power Plug with 2 x 4 sq.mm FRLS PVC Insulated Copper Conductor single core cable in surface/Recessed medium class PVC Conduit along with 1 No. 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthing as required.
2980
334
995320
... More
Wiring for Circuit/Submain Wiring along with earth Wire with the following Sizes of FRLSPVC insulated copper conductor,single core Cable in surface/Recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
3530
275
970750
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
50
570
28500
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
215
1005
216075
... More
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
275
1365
375375
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
220
439
96580
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
90
537
48330
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
220
754
165880
... More
1 R x 70 Sq.mm Copper Multistrand Wire
90
2541
228730.5
... More
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
14
4107
57498
... More
Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required
516
40
20640
... More
Supplying and fixing 25/32 A DP switch on surface/ recess complete with connections, testing and commissioning etc. as required.
35
1169
40915
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
88
369
32472
... More
Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch,connection,painting etc. as required.
286
586
167596
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket
172
477
82044
... More
Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single Pole
357
256
91392
... More
Triple pole
14
1007
14098
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral
bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door
7
4974
34818
... More
8 way (4 + 24), Double door
12
5967
71604
... More
12 way (4 + 36), Double door
7
7950
55650
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of
200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .12 way (4 + 36), Double door
2
12833
25666
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A F.P MCB 10 Ka "C" Curve
4
1262
5049
... More
40 A F.P MCB 10 Ka "C" Curve
3
1262
3787.5
... More
16 A F.P MCB 10 Ka "C" Curve
3
891
2673
... More
25 A F.P MCB 10 Ka "C" Curve
2
891
1782
... More
Supplying and Fixing of Following Ratings of D.P MCB 240 Volts "C" Series in the Existing MCB D.B complete with connections,Testing and Commissioning Etc. as Required. 63 A D.P MCB 10 Ka "C" Curve
18
661
11907
... More
32 A D.P MCB 10 Ka "C" Curve
14
409
5733
... More
25 A D.P MCB 10 Ka "C" Curve
6
409
2457
... More
40 A D.P MCB 10 Ka "C" Curve
12
409
4914
... More
16 A D.P MCB 10 Ka "C" Curve
9
661
5953.5
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes
in cubicle panel, making connections, etc. as required.100 A,30KA,FPMCCB
2
7723
15446
... More
Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required.
365
13
4745
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
20
7472
149440
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.
(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
88
144
12672
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
240
706
169440
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
13838
27676
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
10
972
9720
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
30
1551
46530
... More
Supply installation testing and commissioning of IP:20 Aluminium Batten 40 W +- 1 W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.
288
768
221244.48
... More
Supply installation testing and commissioning of IP20 led downlighter 15 W-18 W +/- 1 W LED Surface downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
194
1422
275986.34
... More
Supply installation testing and commissioning of IP65 led Street Light 90 W +/- 5 W complete with M.S/G.I Pipe(Duly Bracket embedded along with Parapet/Wall including complete connections as required .The P.F.0.95 ,THD10% ,CCT 5700K, CRI 80. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 265V. The Fixture should have In-built Surge Protection of 2.5kV Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
29
7000
203000
... More
Supply installation testing and commissioning of IP:20 Aluminium Batten 10W-12 W +- 1 W LED Surface Mounted 2 ft. with system lumen efficacy of 100 lm/W and P.F 0.9 THD 20% CCT 6500K,CRI 80 .The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V.The fixture should have inbuit surge protection of 2KV.Certification-LM 79 and LM 80.The test report should be from Govt. Approved Lab/inhouse NABL Lab.
30
533
16004.4
... More
Supply installation testing and commissioning of IP20 led downlighter 18 W +/- 1 W LED Recess downlighter round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
57
1422
81088.77
... More
Supply installation testing and commissioning of IP65 led Bulk head 10 W +/- 1 W LED Surface Pressure Die Cast Aluminum system lumen efficacy of 100 lm/W with Polycarbonate Opal Diffuer and P.F.0.95 ,THD10% ,CCT 5700K, CRI 80, IK rating IK08. The LED with Useful life of 50000 Hrs at L70. The Input voltage range shall be 150V to 265V. The Fixture should have In-built Surge Protection of 2.5kV Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab .
3
1778
5334.78
... More
Supply & Fixing of 36W , 2x2 LED reccesse type Luminaire suitable for operating Voltage range of 150V-270V with inbuilt surge protection of 2KV and Color temprature 5700K ANSI BIN . Minimum system lumens 4320 and system efficacy 120 Lm/watt (Supported by in house NABL approved report of LM79 provided by OEM and duly signed by company manager not below rank of RM) . Luminaire should be suitable for armstrong /grid ceiling mounting with help of 4 Nos clips for suspension. Body made up of CRCA powder coated with Diffused Optics. Luminaire size should not be less than 595x595x60mm and power factor =0.95, CRI=80, THD10%, Max system wattage should be 36 Watt, IP-20 ingress protection. NABL certification and BIS (both luminaire and driver) requried to be provided at the time of sample approval.
78
2185
170439.36
... More
Supply,Installation,Testing and Commissioning 486 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of Metal Body with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required 300 mm
19
3109
59086.39
... More
450 mm
12
4694
56335.2
... More
Supply installation testing and commissioning of Ceiling Fan 3 Star Rated with Voltage Range 90 V to 300 V,Min. Air Delivery 212 CMM,Service Value 5.3 Cu.m/min/watt,Aluminium Blades ,including wiring the down rods of standard length(Upto 45 cm)with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Required.(1200 mm)
88
2206
194168.48
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel Service Block) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt). INCOMER TMR Based MCCB 320 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos) Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 400 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD) OUTGOINGS Manual Changeover 315 A F.P 415 Volts AC-23 Duty(01 ) MCB 40 A F.P "C" Curve 10 Ka(04 Nos) MCB 25 A F.P "C" Curve 10 Ka(01 Nos) MCB 16 A F.P "C" Curve 10 Ka(01 Nos) MCB 63 A F.P "C" Curve 10 Ka(02 Nos) TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos) TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos) TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos) TMR Based MCCB 125 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos) Load Bearing Members to be made out of 2.0 mm CRCA Sheet.Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
1
203700
203700
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( UPS Building Distribution Panel Service Block) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).INCOMER TMR Based MCCB 125 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos) Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 150 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD) OUTGOINGS
MCB 25 A F.P "C" Curve 10 Ka(02 Nos)
MCB 16 A F.P "C" Curve 10 Ka(03 Nos)
MCB 63 A F.P "C" Curve 10 Ka(04 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet Gland Plates to be 3.0 mm Thick.
1
79910
79910
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel Paramedical Staff) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 125 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 150 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
Manual Changeover 125 A F.P 415 Volts AC-23 Duty(01 )
MCB 40 A F.P "C" Curve 10 Ka(07 Nos)
MCB 16 A D.P "C" Curve 10 Ka(02 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
82500
82500
... More
Supplying and installing following size of perforated HotDipped Galvanised Iron cable tray (Galvanisation thickness not
less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required.100 mm width X 50 mm depth X 1.6 mm thickness
100
669
66900
... More
300 mm width X 50 mm depth X 1.6 mm thickness
140
963
134820
... More
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required. 3.5 C X 25 Sq.mm A2XFY
120
1206
144776.4
... More
3.5 C X 35 Sq.mm A2XFY
100
702
70220
... More
3.5 C X 300 Sq.mm A2XFY
780
3130
2441680.8
... More
3.5 C X 70 Sq.mm A2XFY
50
1167
58379.5
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet) 3½ X 25 sq. mm (28mm)
2
313
626
... More
3½ X 35 sq. mm (32mm)
4
369
1476
... More
3½ X 300 sq. mm (70mm)
10
1195
11950
... More
3½ X 70 sq. mm (38mm)
2
468
936
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.200 mm dia (OD-200 mm & ID-175 mm nominal)
530
668
354040
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm)
74
298
22052
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet
16
148
2368
... More
T.V Antenna Socket Outlet
30
148
4440
... More
Computer Socket RJ45 Modular type
28
462
12945.8
... More
Supplying and Fixing of Following sizes of PVC Conduit along with Accessories in surface/Recess including painting in case of surface conduit,cutting the wall and making good the same in case of recessed conduit as required.20 mm PVC Conduit
1570
128
200960
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
250
38
9500
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable
700
57
39900
... More
Supply & Erection of lockable 12 U rack with 5A strip and two fan for distribution, mounting of patch panels, hubs, switches etc,, complete as per specification and as desired by EIC.
5
9247
46235
... More
Supply & Erection of CAT 6, 24 port Jack panel for termination of CAT6 cable,Testing & certification of the network with Omni/Penta Scanner of each Cable.
3
4054
12163.26
... More
Supply & Erection of Cat-6, 1Mtr Patch Cords complete as per specification and as desired by EIC.
28
239
6692
... More
Supply & Erection of Cat-6, 3 Mtr Patch Cords complete as per specification and as desired by EIC.
6
377
2262
... More
Supply, installation, testing and commissioning of Junction Boxes/DB-10 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC
1
1448
1448
... More
Supply, Installation, Testing and Commissioning of 10/100/1000 Mbps Unmanaged Switches with Provision of 24 10/100/1000 Mbps ports as per specification and as desired by the Engineer Incharge.
3
25605
76816.41
... More
Supply,Installation,Testing and Commissioning of Media Converter.
5
5335
26675
... More
Supply & Erection of Termination Box complete as per specification and as desired by EIC.
5
3642
18210
... More
Supply , Installation , Testing and commissioning of 16 Channel NVR (Network Vedio Recorder) Embadded Linux based for recording upto 16CH @ D1 with 02 nos. SATA HDDs minimum 20TB storage or more (recording requirement all cameras recording at D1, 25fps for 30 days), H.265 HEVC/H.264/MJPEG codec decoding, Front Control Pannel with LEDs Indication, 2 nos. USB, ONVIF S, Time Sync with NTP, Encrypted Streaming & Control, 2-Way Audio Line & Out, PTZ Operation Pan, Tilt, Zoom, Support, Pre & Post Alarm Recording Support, Recording/Evidance Clip Export to USB, 16 Channel Syncronous Playback, Playback control i.e Play, Pause, Stop, Fast Forward, Backward, Timeline & Zoom; Snapshot, Web Client, Central Monitoring Softawre, iPhone; iPad; Android based Mobile clients, 01HDMI & 01VGA Output, 02 On Board HDDS each up to 10TB, Alarm Input (1 nos.), Alarm Output (01 nos.), NDAA Section 889 Compliant, Operating Temperature –10°C to 55°C, Certification : Certifications: ONVIF compliant, UL/CSA, CE, FCC, EN, NDAA & RoHS compliant.including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge.
2
45000
90000
... More
Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome Camera, 1/2.8" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, triple stream at various resolution & Frame Rates, Min. Illumination required 0.007 lux (color), 0 Lux IR On, 2 IR LEDs, Smart IR with upto 20m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265, H.264 & MJPEG , Fixed Lens 2.8mm, Field of View FoV H:90°, V:62°, BLC, HLC, WDR, 3DNR, White Balance - Auto/Manual, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 4 Privacy Mask, 8 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2-Way Audio Full Duplex Line IN/Out, 256GB SD card support, Alarm: 1In/1out, PoE (802.3 af) and 12V DC, Max 5W, IP 66/67 & IK10 with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T Compliant, UL/CSA, CE, FCC, EN, RoHS & NDAA Section 889 compliant.
19
14000
266000
... More
Supplying,Installation,Testing and Commissioning of 55 Inches Ultra H.D LED Display Monitor as per the Specifications attached.
2
64001
128003.18
... More
Supply, Installation, Testing and Commissioning of 10TB 7200 rpm SATA 6 Gb/s 3.5" Internal Enterprise Hard Drive
2
45000
90000
... More
Supply, transportation,Unloading , installation,testing & Commissioning of Online UPS 60KVA/60 KW(3Ø IN: 3Ø OUT) with 15 min backup : True Online Pure Sine wave DSP Controlled online UPS with 3 phase AC input and 3 phase AC output with 30 minutes backup on SMF batteries Bank with inbuilt Isolation Transformer of same OEM make at Input side.
1
1130971
1130971.13
... More
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted includingearthing etc. as required. 8 way , Double door
6
2573
15438
... More
Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted includingearthing etc. as required. 12 way , Double door
2
2315
4630
... More
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.3.0 C X 10 Sq.mm A2XFY
225
350
78943.5
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)3.0C X 10 sq. mm (22mm)
6
257
1542
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)
225
209
47025
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1 x 1.5 sq. mm
1700
45
76500
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A F.P MCB 10 Ka "C" Curve
1
1809
1809.82
... More
63 A F.P MCB 10 Ka "C" Curve
1
1809
1809.82
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Canteen Distribution Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 150 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
Manual Changeover 100 A F.P 415 Volts Ac-23 Duty(01 Nos)
MCB 63 A F.P "C" Curve(02 Nos) MCB 40 A F.P "C" Curve(02 Nos)
MCB 16 A D.P "C" Curve(02 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
83200
83200
... More
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required
.3.5 C X 50 Sq.mm A2XFY
80
819
65556.8
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
3½ X 50 sq. mm (35mm)
2
413
826
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
120 mm dia (OD-63 mm & ID-51 mm nominal)
285
368
104880
... More
Supply & Erection of CAT 6, 16 port Jack panel for termination of CAT6 cable,Testing & certification of the network with Omni/Penta Scanner of each Cable.
2
4258
8516
... More
Supply, Installation, Testing and Commissioning of 10/100/1000 Mbps Unmanaged Switches with Provision of 16 10/100/1000 Mbps ports as per specification and as desired by the Engineer Incharge.
2
19490
38980
... More
SITC of 2.2 KVA Sine Wave Inverter , Input 1 Phase 3 wire and output 1 phase 3 wire with 2 Nos of 12 V 200 aH Battery.
1
59000
59000
... More
Supply, Installation, Testing and Commissioning of 10TB 7200 rpm SATA 6 Gb/s 3.5" Internal Enterprise Hard Drive
2
30586
61172.02
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)( Main L.T Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 630 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 800 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
TMR Based MCCB 125 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
TMR Based MCCB 320 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (03 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
203310
203310
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)( LTFP-1 Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 125 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar(150 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
TMR Based MCCB 100 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
MCB 32 A D.P "C" Curve 10 Ka(05 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
68200
68200
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:55)( LTFP-2 Panel) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 320 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 400 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
TMR Based MCCB 125 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
TMR Based MCCB 200 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
146830
146830
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push
12
140
1680
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
12
99
1188
... More
Supplying and Fixing of Following Ratings of D.P MCB 240 Volts "C" Series in the Existing MCB D.B complete with connections,Testing and Commissioning Etc. as Required. 25 A D.P MCB 10 Ka "C" Curve
24
591
14196
... More
16A D.P MCB 10 Ka "C" Curve
2
591
1183
... More
40A D.P MCB 10 Ka "C" Curve
18
955
17199
... More
63A D.P MCB 10 Ka "C" Curve
18
955
17199
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing andcommissioning etc. as required.
40 A F.P MCB 10 Ka "C" Curve
6
1823
10939.5
... More
Supplying and fixing following rating, Four pole, 415 V, 10 Ka M.C.B in the existing MCB DB complete with connections, testing andcommissioning etc. as required.
63A F.P MCB 10 Ka "C" Curve
6
1823
10939.5
... More
Supply,Installation,Testing and Commissioning 486 Cu.m/Hr. AC 220-240 Volts, 50 Hz exhaust fan made out of ABS Plastic Material with inbuilt thermo cutoff Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. complete as required .
300 mm
36
1486
53518.32
... More
Supply and Making end Termination with Double Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required 3.5 C X 70 Sq.mm Aluminium Armoured
2
468
936
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
680
47
31960
... More
Supply, installation, testing and commissioning of Junction Boxes/DB-10 Pairs with Original Krone module and Back Mount Frame and have Lock -n- key, complete in all respect as per specification and desired by EIC
2
1448
2896
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Building Distribution Panel Service Quarters) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 200 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (02 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 300 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
Manual Changeover 200 A F.P 415 Volts AC-23 Duty(01 )
MCB 63 A F.P "C" Curve 10 Ka(07 Nos)
MCB 16 A D.P "C" Curve 10 Ka(02 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
107500
107500
... More
Supplying and Laying of 1 No. PVC/XLPE insulated and PVC Sheathed /XLPE Power Cable of 1.1 KV Grade of Following Sizes in the existingCable Tray/ RCC/Hume/DWC/Stone ware/Metal Pipe as Required.
3.5 C X 95 Sq.mm Aluminium Armoured
65
1256
81693.95
... More
Supply and Making end Termination with Double Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required 3.5 C X 95 Sq.mm Aluminium Armoured
2
588
1176
... More
Supplying,Installation,Testing and Commissioning of Cubical Type Outdoor LT Panel Board Suitable for 415 V 3 Phase 4 Wire 50 HZ AC Supply System including Incomers,Out Goings,Bus Bars etc. as required as per the Following Description.(IP:42)( Wall Mounted Distribution Panel Ambulance and Staff Accomodation) .The successful tenderer shall take prior approval for the panel builder/fabricator alongwith G.A. drawing, wiring diagrams, single line diagram before start of fabrication of LT panel.Circuit breaker shall be capable of carrying the full load current defined for 50 degree Celsius without any derating.The Panel Builder Shall be CPRI /ERDA/ANY NABL ACCREDITED LAB approved.Refer SLD (Appx Size:- x x mt).
INCOMER
TMR Based MCCB 63 Amps FP Icu=Ics=100% Breaking Capacity 36 KA with Extendable ROH (01 Nos)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 100 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
Digital Metering Devices,comprising Voltmeter,Ammeter,Selector Switch,Indicating Lamps,C.T Set,Bus Bar( 100 Amps ) and MCB Strip of suitable size as Required,PLC,HMI,Contactor Etc. As Required to be Part of the BOM to be Furnished by the Panel Supplier.Note:- The Panel Builder shall not start the Fabrication of Panel unless the G.A Drawings are approved by the Engineer Incharge or Consultant.(Refer SLD)
OUTGOINGS
MCB 40 A D.P "C" Curve(05 Nos)
Load Bearing Members to be made out of 2.0 mm CRCA Sheet.
Partitions to be made out of 1.6 mm CRCA Sheet
Gland Plates to be 3.0 mm Thick.
1
66218
66218.36
... More
Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in groundin Existing DWC Pipe including excavation, sand cushioning, protective covering and refilling the trench etc as required.
3.5 C X 25 Sq.mm A2XFY
75
514
38584.5
... More
Supply and Making end Termination with Brass Compression Gland and Aluminium Lugs for the Following Sizes of PVC insulated and PVC Sheathed/XLPE Aluminium Conductor Cable of 1.1 KV Grade as Required (Comet)
3½ X 25 sq. mm (28mm)
2
313
626
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%