Public Works Department Tender

75mm Dia pipe

110mm Dia pipe

Floor Trap 110mm

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. in unit imless single piece WC with UF soft Close slim Seat Cover, Hinges, Dual Flush Cistern fittings, fixing accessories and accessories aset, size 385x720x710mm S Trap 300mm

Providing/fixing of C.P fittings of approved make and of standrad quality as directed by Engineer Incharge (complete Job) all inclusive.

Two in One Bib Cock (Jaqaur) Jacquar or equivalent)

Angle value

Health facuet with lead (Jaqaur) Jacquar or equivalent)

Grating

Wash basin mixer single lever basin mixer without popup wate with 450mm long braided hoses

Wall mixer Jaguar

Sink Mixer

CP Connection

Soap case

Mirror

Waste Pipe

Providing and fixing of Wash basin with pedestal of approved size and make as directed by Engineer Incharge. Complete including all accessories

Providing and fixing of seat cover for European WC including all necessary fixtures complete job,

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)

Dismantling damaged doors of UPVC including disposal of unservicable materila as per directions of Engineer Incharge complete job.

Providing/fixing of Hardware fixtures of apprved make including necessary screws etc.

Handless 6"

T-bolts-6"

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete 10 liter capacity (Parryware/ Hindware/ Cera make) with all fittings C.I/MS brackets 32mm dia flush pipe with fittings and clamps overflow arrangements with special and mosquito proof coupling of approved municipal design complete

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners/PVC connection etc. Venus, Recold, Jacquar, Crompton 35 litre capacityfittings and fixtures all complete wherever required in the course of completion.complete job.

Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners/PVC connection etc. Venus, Recold, Jacquar, Crompton 25 litre capacityfittings and fixtures all complete wherever required in the course of completion.complete job.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x 0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)

Repair and renovation of collapsible gate of size 6'x8' size steel with replacement of bolts, nuts locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer complete job; inclusive all.

Providing and fixing 3.5mm thick glass panes of standard quality in glazed shutter including cost of wooden beading, nails etc. excluding the portion of glass in groves complete job. all inclusive

Providing and fixing 3.5mm thick glass panes of standard quality in glazed shutter including cost of wooden beading, nails etc. excluding the portion of glass in groves complete job. all inclusive Excluding cost of glass

Providing and laying Vitrified anti skid tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm

Providing and Fixing factory made UPVC door frame, made of UPVC extruded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm ( ± 0.2 mm) , corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fasteners, all complete as per manufacturer’s specification and direction of Engineer-in-charge.

Providing and fixing 30mm thick factory made uPVC door shutters made of styles and rails of a UPVC hollow section of size 60x30mm and wall thickness 2mm +/-0.2mm with inbuilt decorative moulding edging on one sides. The styles and rails mitred and joined at the corners and by means of MS galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm +/-0.1mm wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30mm and 2mm +/-0.2mm wall thickness fixed to the shutter styles by means of plastic/galvanized MS 'U' cleats. The shutter frame filled with acp of 4mm thick , complete as per manufacturers' specification and direction of engineer-in-charge.incl cost of all fixtutes locks ,handles, hinges complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Repairing of existing UPVC doors including cost of repairing, fixtures, locks, hinges wherever required complete job inclusive all.

Providing of Wiring for Lighting point/Ceiling fan point/Ex.fan point/Call bell Point with 1.5 sq mm FRLS PVC Insulated multi strand copper Wire of Polycab /Finolex /Paramount / Anchor make dully isi marked in surface / recessed medium class PVC conduit ,. ( Excl Cost of Conduit ) but including cost of circuit wiring of same size from DB Box to first switch in sub circuit complete job . (Seperate circuit for normal and invertor points ) The job includes providing and fixing of 6 Amps one way switch of SSK /REO / Anchor make to be fitted on backlite hylum sheet of required size (incl cost of hylum sheet) to be fitted on walls with necessary screws including refacing of walls whereever required complete job.

Providing of Wiring for 16 Amp Power Sockets outlet points in 3x4.0 sq mm ( P+N+E) FRLS PVC Insulated multi strand copper conductor wires of Polycab /Finolex /Paramount / Anchor make to be laid in surface / recessed medium class PVC conduit. ( Excl Cost of Conduit/Channel ) . The job includes providing and fixing of 16 Amps one way switch and 16 Amps one way socket of SSK /REO / Anchor make to be fitted on backlite hylum sheet of required size (incl cost of hylum sheet) to be fitted on walls with necessary screws including refacing of walls whereever required complete job.The job includes circuit wires from DB Box to first switch in sub circuit ,max two points shall be paired in one circuit complete job ( No extra circuit wiring will be paid what so ever the length)

Supply. Installation, testing and commissioning of 250 mm sq Shutter Type Exhaust fans of of CG /USHA / Standard /Helonix make

Providing ,Installation ,Testing and Commissioning of 12 Watt LED Surface mounted lighting fixtures (round / Square) having aluminium body (CRCA) of Philips /Havells /Trulux /Helonix /Jaguar /Wipro make dully isi marked ,incl 2-pair connection wires complete job. The job includes replacement warrenty of fixture for a period of two years reckoned from date of sucessful commissioning

Providing, laying in position 20/25mm PVC conduit for surface including cost of necessary clips complete job.

Taking of Geo Tagged Photographs of size 125mm x200mm pre execution, during execution and post completion (7 No's of Each)