Public Works Department Tender

Supply, installation, testing and commissioning of 150-200 mm sweep shutter type exhaust fans of Havells/ Crompton Greaves/Bajaj/ Anchor, incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections.

Supply and fixing of modular blanking plates on modular switch plates, excluding cost of switch plates.

Wiring for circuits/ sub mains along with earth wire in FRLS PVC insulated 660/1100volt grade flexible stranded copper conductor wires of Polycab/ Havells/ Anchor/ Finolex make in recessed or surface conduiting system, incl. cost of conduits

2 x 4 sq.mm + 1x 4 sq. mm for Lighting sub main

2 x 10 sq.mm + 1 x 6 sq. mm for normal / heating sub main

Supply and fixing of deep/ concealed boxes made of heavy gauge sheet in RCC slabs

Supply and fixing of 12 way , Double door surface/ recess mounting , vertical type,240/ 415 V, SP&N MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. (Havells/ Legrand /Schneider/ABB)

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA MCB of Legrand/L&T/Schneider/ABB suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 32A DP rating 240/415V, 10 KA MCB of Legrand/L&T/Schneider/ABB suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply, installation, testing and commissioning of 63A DP rating 240/415V, 10 KA MCB of Legrand/L&T/Schneider/ABB suitable for inductive load in the MCB distribution board complete with necessary connections.

Supply and fixing of single pole blanking plates on existing MCB distribution boards.

Supply, installation, testing and commissioning of wall/floor mounted compartmentalized ,415 volts, TPN MCCB main distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices CPRI Approved: 1.NORMAL INCOMING 125A DP MCB 10KA 01 no. Legrand/ Havells/ L&T/Schneider/ABB 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 2. Generator INCOMER 100A change over switch 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. OUTGOING 63A DP MCB 10KA 02 no. 40A DP MCB 10KA 02 no 32A DP MCB 10KA 02 no The contractor has to submit the test certificate of main switch gear.

Earthing with GI earth pipe 4.5 mtr. Long 40 mm dia. Including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt.

Providing and fixing of 25mmx5mm GI strip on surface or in recess for extending the earthing from earth electrode to controlling panel in one rim to be laid through required dia. of PVC conduit.

Supply, laying, connecting and commissioning of 50 sq. mm 2 core PVC insulated and steel armored 1.1 KV grade Aluminum LT cable from LT panel to LT pole, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). Havells/ Polycab

Supplying and fixing of modular switch/ socket on existing modular plate and switch box, incl. connections, etc. as required.

i. 5/6A socket.

ii.6 A indicator.(Havells/Anchor/Legrand/Gold Medal /

Providing & Fixing of IKO8 IP-66 protected high power LED flood light system with single piece Pressure dicast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to S watt each. Integrated potted driver as a unique BIS R number having more than 85 % and in compliance to BIS certified and Trade mark certificate. [he System level Luminary efficacy =1 wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff V AC and upto resetting Safety Power Factor 0.95, THD(I) 10%, driver current) =750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min 24KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI70 and CCT 5700k $355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABI lab setup for all testing facilities for LED fixtures. (I-M79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (50 Watt)

Supply and erection of 8 mtr. Long Steel tubular poles with base plate firmly welded, incl. excavation of pit , disposal of excavated earth, painting (2 coats over red oxide) with silver paint ,GI wire earthing, cement concrete block of M15 grade and required steel/angle iron clamps fixed at the top for holding LT cables. (SP-15 having approx. weight 119 Kg).

Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of 40 mm dia. GI pipe as per requirement.

Providing & Fixing of IKO8 IP-66 protected high power LED Street / Flood system with single piece Pressure dicast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to S watt each. Integrated potted driver as a unique BIS R number having more than 85 % and in compliance to BIS certified and Trade mark certificate. [he System level Luminary efficacy =1 wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff V AC and upto resetting Safety Power Factor 0.95, THD(I) 10%, driver current) =750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min 24KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI70 and CCT 5700k $355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABI lab setup for all testing facilities for LED fixtures. (I-M79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (100 Watt)

Supply, laying, connecting and commissioning of 10 sq. mm 2 core PVC insulated and steel armored 1.1 KV grade Aluminum LT cable from controlling system to lights, incl. cost of required al. thimbles duly crimped and 63A connector (Over head/ under ground). Havells/ Polycab

Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light.

2 x 2.5 sq. mm (P + N)

1 x 2.5 sq. mm ( earth)

Supply and installation of 40A DP MCB with PVC enclosure box for controlling the high mast lighting system.

Supply, installation , testing and commissioning of relay type voltage stabilizer operating from input voltage 90-260Volt thereby producing output voltage of 230volts +_ 3%. (3 KVA) V- Guard/ Liv- Guard/ Servokon

Supply and fixing of sheet steel enclosure box having locking arrangements for housing of voltage stabilizer and DP MCB. (1`-6” x1`-6”x0`-8”), incl. clamps, nut/bolts / welding charges.