Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date14 Dec 2024
Closing Date19 Dec 2024
Tender Amount₹ 3,80,000
Costs
EMD
₹ 7,600Document Cost
₹ 600Tender Fee
Refer Documents
Summary
Stage Contract For Civil Sanitary Hardware And Plumbing Services For The Year 2024-25 In Respect Of Various Houses Of Hospitality And Protocol Department At Jammu
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_267991_1Bid Award Id
ViewTender No
eNIT No49 of 2024 -25 Dated 13-12-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
1
6
6.95
... More
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
1
1458
1458.45
... More
Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtrs (Stacks of cleaned bricks shall be measured) from brick work in cement mortar
1
4
4.94
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :
-
-
-
... More
Of area of 3 sqm. and below
1
285
285.25
... More
Of area beyond 3 sqm
1
390
390.5
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead :
-
-
-
... More
Of area of 3 sqm. and below
1
110
110.05
... More
Of area beyond 3 sqm.
1
145
145.75
... More
CP Toilet paper holder (Jaquar/Hindware)
1
1300
1300
... More
PVC seat cover
1
1200
1200
... More
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.
1
38
38.9
... More
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 fine sand)
1
441
441.4
... More
Renewing glass panes, with putty and nails wherever necessary including raking out old putty : :
-
-
-
... More
Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)
1
991
991
... More
Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm).
1
1130
1130.85
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
... More
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
1
4826
4826.5
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
5733
5733.6
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
6591
6591.25
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
... More
Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means:
1
142
142
... More
Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
947
947.25
... More
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
1
159
159.65
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platforms
1
718
718.2
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
1
262
262.2
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars
1
123
123.2
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1
141
141.4
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1
138
138.2
... More
Looking mirror (Ornamental with spacers)
1
2100
2100
... More
CP extension nipple 50mm
1
140
140
... More
White washing with lime to give an even shade :
-
-
-
... More
Old work (two or more coats)
1
17
17.75
... More
Old work (one or more coats)
1
10
10.8
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
14
14.5
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre,two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
1
89
89.9
... More
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
1
18
18.7
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.
1
88
88.6
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
1
86
86.75
... More
15mm Cement plaster on the rough side of single or half brick wall of mix:
-
-
-
... More
1 : 4 ( 1 cement : 4 fine sand)
1
327
327.85
... More
1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
... More
12mm Cement plaster of mix:
-
-
-
... More
1 : 4 ( 1 cement : 4 coarse sand)
1
283
283.8
... More
1 : 6 ( 1 cement : 6 coarse sand)
1
266
266.2
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
1
66
66.85
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1
98
98.75
... More
Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.
1
94
94.85
... More
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
1
131
131.85
... More
PVC Handle set for cistern
1
200
200
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
... More
1 mm thick
1
138
138.1
... More
2 mm thick
1
181
181.05
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
1
265
265.3
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work (Parkash, Suyra Make) or equivalent
-
-
-
... More
15 mm dia. nominal bore (Medium)
1
360
360.55
... More
20 mm dia. nominal bore (Medium)
1
431
431.2
... More
25 mm dia. nominal bore (Medium)
1
529
529.7
... More
32 mm dia. nominal bore (Medium)
1
634
634.65
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (Parkash, Suyra Make) or equivalent
-
-
-
... More
15 mm dia. nominal bore (Medium)
1
206
206.5
... More
Clearance of manholes by way of removal of slush/human excreata etc. from manholes incl. disposal of same outside premises and clearance of connecting pipes incl. rodding, watering complete.
1
500
500
... More
Door Lock (Superior) (Godrej)
1
2000
2000
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion
-
-
-
... More
75mm dia pipe
1
226
226.15
... More
110mm dia pipe
1
366
366.3
... More
150mm dia pipe
1
550
550
... More
200mm dia pipe
1
900
900
... More
Providing and fixing PVC pipe including / jointing with seal ring (Finolex / Supreme) of pressure @ 5.5 kg/Cm2
-
-
-
... More
75mm dia plain bend
1
125
125
... More
75mm dia door bend
1
170
170
... More
75mm dia cowl
1
125
125
... More
110mm dia plain bend
1
240
240
... More
110mm dia door bend
1
250
250
... More
110mm dia door Tee
1
290
290
... More
110mm dia Tee junction
1
325
325
... More
Reducer Tee 110 mm dia to 75mm dia
1
250
250
... More
Cowl 110 mm dia
1
125
125
... More
75mm dia Door Tee
1
180
180
... More
150mm dia Plain Bend
1
450
450
... More
150mm dia Door Bend
1
530
530
... More
Providing and fixing PVC floor trap of Finolex / Supreme make
1
210
210
... More
Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.
-
-
-
... More
Orissa pattern W.C Pan of size 580x440 mm
1
5493
5493.25
... More
Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required
1
5632
5632.25
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps
1
3561
3561.9
... More
White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap
1
3260
3260.85
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
1
1474
1474.15
... More
Providing and fixing counter top wash basin white vitrous china complete (Jaquar/Hindware make)
1
5000
5000
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively.
1
1400
1400.05
... More
Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity -White
1
1163
1163.85
... More
PVC connection for flushing cistern, wash basin, sinks etc
-
-
-
... More
450 mm long
1
160
160
... More
600 mm long
1
180
180
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid
1
673
673.6
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
1
14487
14487
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
1
21554
21554
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.
1
5538
5538.75
... More
Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.
1
2303
2303.9
... More
Providing and fixing of China Ware fittings (Superior Type as per the make and design specified by the Engineer-In-Charge)
-
-
-
... More
Wash basin china ware (white) 600x470x160mm
1
1020
1020
... More
Wash basin china ware size 565x435x215mm
1
795
795
... More
Round wash basin Counter top size 545x545x185mm
1
6150
6150
... More
Extended wall hung seat complete with cistern size 365x643x770mm
1
9450
9450
... More
EWC with soft clearing seat cover size 360x360x680x755, S-Trap complete with
1
8700
8700
... More
EWC with normal clearing seat cover size 350x480x390
1
4200
4200
... More
Providing and fixing of china ware urinal partition
1
3500
3500
... More
Providing and fixing of china ware urinal size 355x345x535mm
1
4450
4450
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
1
583
583.25
... More
Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
1
712
712.6
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
1
704
704.8
... More
Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931
1
690
690.3
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
1
582
582.35
... More
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
2072
2072.1
... More
Brass spindle for conceled stop cock
1
800
800
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:
-
-
-
... More
Semi rigid pipe 32 mm dia
1
137
137.4
... More
Flexible pipe 32 mm dia
1
128
128.05
... More
Providing and fixing C.P fittings 15mm nominal bore and fixtures (Superior Type as per the make and design specified by the Engineer-In-Charge)
-
-
-
... More
Bib cock weight not less than 690 gms
1
704
704.8
... More
Short nose bib cock (Jaquar)
1
1200
1200
... More
Long nose bib cock weight not less than 810 gms (JAQUAR)
1
1500
1500
... More
Angle valve (Jaquar)
1
900
900
... More
Mixer for wash basin (Jaquar)
1
4000
4000
... More
Mixer for bathing (wall mixer) Jaquar
1
5000
5000
... More
Swan neck left / right tap
1
1750
1750
... More
C.P gratings 4"
1
90
90
... More
C.P gratings 6"
1
150
150
... More
Soap dish (Jaquar)
1
650
650
... More
C.P. towel rod 2'-0"
1
1350
1350
... More
C.P. towel rod 1'-6" (20mm dia)
1
1170
1170
... More
Towel ring 200 mm dia
1
990
990
... More
Waste coupling for wash basin 32 mm dia
1
480
480
... More
Waste coupling for laboratory sink 50 mm dia
1
650
650
... More
Shower with arm
1
2000
2000
... More
Conceled stop cock with head
1
1400
1400
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge
1
412
412.1
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
610x460mm bowl depth 200mm
1
3723
3723.55
... More
470x420mm bowl depth 178mm
1
3308
3308.8
... More
Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete
1
835
835.6
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1
8
8.75
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
11533
11533.5
... More
Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
9059
9059.2
... More
Demolishing W.C platform cement concrete and disposal of unservicable material upto dumping site at ground floor road side (maximum 3'-0"x4'-0"x1'-6")
1
500
500
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
-
-
-
... More
For fixed portion. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
481
481.95
... More
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
514
514.3
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
-
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.) Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
574
574.45
... More
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
607
607.4
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on both sides.
1
933
933.35
... More
Repair to aluminium door shutters incl. refixing / fixtures / ACP sheets rubber gasket / aluminium beeding etc complete (Cost of ACP sheet paid separtely)
1
60
60
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness
1
2407
2407.05
... More
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
1
456
456.4
... More
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
-
-
-
... More
300x16mm
1
298
298.75
... More
250x16mm
1
251
251.95
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
200x10mm
1
95
95.32
... More
1500x10mm
1
83
83.8
... More
100X10mm
1
63
63.31
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
... More
125mm
1
68
68
... More
100mm
1
60
60
... More
75mm
1
51
51.95
... More
Polishing with melamine , chalk mitti complete
1
100
100
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).
-
-
-
... More
Second class teak wood (30mm thick)
1
3933
3933.4
... More
Second class teak wood (35mm thick)
1
4432
4432.4
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
-
-
-
... More
Particle Board 12mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
1
1367
1367.25
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 35mm thick
1
4256
4256
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 30mm thick
1
3788
3788.5
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:
-
-
-
... More
2nd class teak wood 50 x 12 mm
1
214
214.75
... More
50 x 20 mm
1
275
275.05
... More
Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately).
-
-
-
... More
GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
1
2026
2026.35
... More
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit
1
2006
2006.35
... More
12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fiber conforming to IS: 2095 part-I, of size 595x595 mm, having perforation of9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing.
1
1303
1303.9
... More
8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing.
1
1964
1964.2
... More
Providing of water proofing treatment to the roof slab, W.C and bathrooms by Austrian technology using diamond shield and fiber mesh covered with two or more coats of specified chemical or using FOSROC, SIKA of BASF water proofing chemical. A primer coat of specified chemical to be applied before fixing / laying of fiber mesh complete
1
70
70
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
1
485
485.1
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.
1
556
556.2
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40mm thick with 20 mm nominal size stone aggregate
1
510
510.25
... More
50 mm thick with 20mm nominal size stone aggregate
1
562
562.15
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.
-
-
-
... More
Size of tile 600x600 mm
1
1448
1448.9
... More
Size of tile 800x800 mm
1
1915
1915.15
... More
Providing and fixing Anti-skid premium tiles on floor (thickness to be specified by the manufacturers) of Ist quality of RAK, KAJARIA make in any colour laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) incl. pointing the joints with white cement and matching pigment etc complete
-
-
-
... More
300x300mm
1
70
70
... More
600x600mm
1
80
80
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete
-
-
-
... More
Size of tile 600x600 mm
1
1395
1395.1
... More
Size of tile 600x1200 mm
1
1600
1600
... More
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete
1
2186
2186.3
... More
Grinding and polishing old terrazo flooring / skirting with floor polish of specified brand for smooth finishing incl. disposal of waste material of griding / polishing from site of work to dumping site at ground floor
1
12
12
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
-
-
-
... More
Granite of any colour or shade (Area of slab over 0.5 sqm) 16mm thick
1
4550
4550.35
... More
18mm thick
1
4655
4655.7
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Grantine work)
1
381
381.7
... More
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
1
246
246.2
... More
Providing and fixing M.S wire guage to old wood shutters / steel shutters incl. removing and fitting of shutters complete
1
40
40
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.
-
-
-
... More
Fixed to steel windows by welding
1
212
212
... More
Fixed to openings / wooden frames with rawl plugs screws etc
1
231
231
... More
Providing and fixing PVC Panelling in walls 8 to 10 mm thick incl. all fittings and fixtures complete (wall affair or any equivalent make)
1
95
95
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
15mm nominal bore
1
453
453.5
... More
20mm nominal bore
1
524
524.85
... More
Providing 1 ¼ “ wooden moulded beading to the ceiling incl. cost of nails, wastage etc complete
1
65
65
... More
Providing and fixing 1" wooden gola to the ceiling incl. cost of nails, wastage etc complete
1
50
50
... More
Providing fency knoob to the cupboard shutters complete job
1
110
110
... More
Providing and fixing 19mm thick wooden board shutters to cabnit incl. M.S hinges and screws complete
1
200
200
... More
Providing and fixing hand held jet sprayer
1
1350
1350
... More
Providing and fixing PVC bend 40mm dia (Superior)
1
70
70
... More
Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge.
1
43
43.65
... More
Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)
1
553
553.8
... More
Aluminium sheet for doors 1mm thick
1
50
50
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
-
-
-
... More
Hot finished welded type tubes
1
156
156.95
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
... More
15mm nominal outer dia pipes
1
419
419.75
... More
20mm nominal outer dia pipes
1
492
492.35
... More
25mm nominal outer dia pipes
1
602
602.4
... More
Providing and fixing 6 mm water proof ply complete job
1
85
85
... More
Providing and fixing 12 mm water proof ply complete job
1
150
150
... More
Providing and fixing 19 mm water proof ply complete job
1
225
225
... More
Providing and fixing of 1.0mm thick sunmica incl. cutting, wastage fevicol, nails carriage etc complete item (Virgo, Amulya or equivalent make)
1
110
110
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
... More
25 mm nominal bore
1
691
691.7
... More
32 mm nominal bore
1
750
750
... More
40 mm nominal bore
1
834
834.6
... More
50 mm nominal bore
1
986
986.15
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required
-
-
-
... More
0.63 mm thick with zinc coating not less than 275 gram/m2
1
974
974.05
... More
Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc
-
-
-
... More
0.80 mm/0.63 mm/0.50 mm thick
1
72
72.75
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
-
-
-
... More
With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws (35mm thick)
1
2078
2078.2
... More
Supply and installation of Armstrong Medintech Plus PUR homogenous vinyl sheet flooring , Inc, 2 metre wide and overall thickness of 2mm. The thickness of wear layer would be 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHILED technology, Plasticizers without DOP, Urethane, colour pigments and filler calendered to from a sheet, colour and pattern details shall be dispersed throughout the thickness of the wear layer, Medintech Plus shall conform to group "I" wear resistance as per EN 649. Clean room certified with class 'A' as per ASTMF5100. Flammability resistance of class BA-sl as per GB8624-2006, Dynamic coeffcient of friction of class DS as per EN 13893, Thermal resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140. Slip resistance of class R9 as peDIN 51130. Residual indentation of 0.03mm as per GB/T 4085-2005. Color fastness rating of 6 as per ISO 105-B02, total weight being 2.8kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria, resistance to chemical, resistance to staining suitablity to castor chair. The product shall be floor score certified with no SVHC content published by European Chemicals Agency (REACH), Product shall contribute to LEED points under Indoor environment quality (LEED EQ) and material and resource (LEED MR) category
1
145
145
... More
Providing and fixing of brass phase for taps / pillar cocks (heavy duty)
1
400
400
... More
Providing and fixing of door mats of standard make
-
-
-
... More
(3'-0"x1'-6")
1
600
600
... More
(2'-0"x1'-6")
1
650
650
... More
Providing and fixing cupboards incl. frame of 2nd class deodar wood 19mm thick partical board with decorative shutters incl. internal box of 19mm partical board complete with paiting with all fittings and fixtures
1
1050
1050
... More
Providing and fixing wallpaper of required colour, shade and design of standard make as directed by the Engineer -In-Charge
1
85
85
... More
Providing and fixing acrylic name plate (writing on both sides)
1
700
700
... More
Supply of Labour (Mazdoor) for various day to day works as per directions of engineer in charge
1
553
553
... More
Supply of CARPANTER for various day to day works as per directions of engineer in charge
1
733
733
... More
Supply of PLUMBER for various day to day works as per directions of engineer in charge
1
733
733
... More
Supply of SWEEPER for various day to day works as per directions of engineer in charge
1
553
553
... More
Supply of technican
1
806
806
... More
Supply of mason 1st class
1
806
806
... More
Supply of welder
1
806
806
... More
Supply of portable welding machine and for repair to various steel works incl. carriage
1
750
750
... More
Supply of portable generator set incl. carriage
1
1400
1400
... More
Cleaning of PVC overhead water tanks by engaging Machines as per directions of engineer in charge
1
1
1
... More
Providing & fixing of Multi Locks to Cup-boards (Godrej)
1
300
300
... More
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete
1
1628
1628
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
1
3305
3305
... More
Providing and fixing ball bearing for rolling shutters.
1
531
531.55
... More
Providing and fixing of PVC sheet (2mm thick)
1
45
45
... More
Providing and fixing of 19mm thick pre-laminated board in paneling over wooden frame including removing of old damaged paneling and anti-termiting the same (complete job) laminated 8mm thick AC4 water resistant
1
130
130
... More
Providing and fixing painting wire gauge shutters, comprising as per window frame of built up MS sections 12mm x 50mm rectangular tube with wire guage shutter made of Z-section including hinges, riveted with frame of 20mm x 3mm flat iron complete job (sample window available at High Court building) including priming and painting as per directions of engineer in charge.
1
700
700
... More
P/F of Louvers on the wall surface incl. base preparation with necessary items, fixtures incl. loading and unloading complete.
1
230
230
... More
P/F of UV Sheet of glossy pattern on the wall complete
1
160
160
... More
Engaging trollies for disposal of mulba from construction site to the dumping yard beyond municipal limits
1
1000
1000
... More
Supplying and stacking at site Good Earth
1
281
281.3
... More
Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of I.S. designation 4.75 mm
1
134
134.9
... More
Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)
1
53
53.55
... More
Mixing earth and sludge or manure in proportion specified or directed by officer in charge.
1
37
37
... More
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 5 cm apart in either direction
1
17
17.98
... More
Providing and fixing of wooden flooring of specified shade and brand as per directions of engineer in charge including base coat of foam complete job.
1
200
200
... More
Providing and fixing wooden profile Grade A to wooden flooring of specified brand as per direction of enigneer in charge
1
140
140
... More
Grinding and polishing old Kota Stone / Chips flooring surface with floor polish of specified brand.
1
22
22
... More
Finishing walls with Acrylic smooth exterior paint of required shade: Suraksha
-
-
-
... More
Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface)
1
119
119.2
... More
Old work (one or more coats applied @ 0.90 liters/ 10sqm)
1
78
78.95
... More
Providing / fixing polycorbonate sheet including wastage of 02mm thick (50 Micron) complete job
1
110
110
... More
Providing / fixing polycorbonate sheet including wastage of 10mm thick (50 Micron) complete job
1
240
240
... More
Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat
1
1003
1003.65
... More
Providing and fixing Brass Name Plate written on both side of Hon'ble Justices. (complete) 2'-6" x3'-3"
1
6500
6500
... More
Proving / fixing of pre-laminated board partition fixed on both sides, fixed over wooden frame of Ist class kail wood complete job including painting of cupboards etc.
1
320
320
... More
Providing and Laying 80mm thick factory made antiskid, anti glazed PCC interlocking paver blocks of M-40 design mix as per IS: 15658: 2006 (Avg. compressive strength of 8 paver blocks shall be minimum 47.2 N/mm2 minimum thickness of wearing layer is 6mm, max abrasion resistance 2mm, maximum water absorption of 3 units is 6% by mass) made by high quality paver blocks making machine with high level of compaction and vibration and of approved size and shape laid in required colour and pattern (pigment used shall not be more than 10% of weight of cement used in wearing course layer) and including 50mm (+5mm) thick compacted bed of naturally occuring, clean, well graded, sharp coarse sand (passing 4.75mm sieve) of uniform moisture content 4% to 8% at the time of spreading. Paver units should be placed with the help of spacer (2mm, 3mm wide) of uncompacted sand cutting machine, filling the spaces between 25mm and 50mm wide concrete having minimum 1:1:2 cement : sand : 20mm crushed stone aggregate mix. After laying paver blocks they shall be compacted with high frequency, low amplitude mechanical flat plate vibrator having plate area sufficient to cover a minimum of 12 paving units, after compaction joint filling by sand shall be spread over the pavement (Joint filling sand shall pass a 2.36 mm No. 8 sleve) an complete as per direction of Engineer-in-charge
1
1150
1150
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete (12"x18")
1
1229
1229.1
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
1
1595
1595.1
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm
1
1136
1136.25
... More
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Medium shade using 50% white cement and 50% ordinary cement.
1
1150
1150.75
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
1
1107
1107.65
... More
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600x600 mm
1
1490
1490.05
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.
1
875
875.95
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile 600x600 mm
1
253
253.7
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
1
929
929.85
... More
Providing and fixing of PVC covers for PVC water storage tanks
1
300
300
... More
Providing and fixing of blind for windows incl. all fixtures and fittings and necessary arrangements etc complete job (superior quality)
-
-
-
... More
Vertical blind
1
2100
2100
... More
Roller blind
1
2400
2400
... More
Zebra blind
1
3300
3300
... More
Repairs to existing blinds
1
60
60
... More
Providing and fixing of curtains of standard size incl. stitching, rings etc complete job (superior quality) 3'-0"x8'-0"
1
1200
1200
... More
Providing and fixing flex board complete with hollow section M.S pipe frame work complete job
1
100
100
... More
Buffing / grinding of stainless steel railing by way of buffing machine
1
75
75
... More
Providing and fixing of honour board/ name plate made of wooden board / ply / acrylic sheet incl. writing complete job.
1
10
10
... More
Providing and fixing of S/S side steel brackets
1
70
70
... More
Providing and fixing of S/S side finners
1
75
75
... More
Finishing walls with textured exterior paint of required shade:Old work (two or more coats on existing cement paint surface applied @ 3.28 ltr/10sqm)
1
204
204.2
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion
-
-
-
... More
75 mm diametre
1
226
226.15
... More
110 mm diametre
1
366
366.3
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete:
-
-
-
... More
40 mm
1
422
422.95
... More
50 mm
1
436
436.35
... More
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
-
-
-
... More
With 2nd class teak wood beading 62x19 mm
1
1308
1308.35
... More
With 12 mm mild steel U beading
1
827
827.4
... More
Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete
-
-
-
... More
125 mm
1
41
41.8
... More
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
-
-
-
... More
Twin rubber stopper
1
63
63.45
... More
Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete
-
-
-
... More
Triple strip (Vertical type)
1
40
40
... More
Providing and fixing of telescopic channel 16" complete set with necessary screws / arrangement (Godrej, Link)
1
500
500
... More
Providing and fixing of door seal with necessary screws etc complete
1
500
500
... More
Providing and fixing of Door lock handle
1
400
400
... More
Providing and fixing of ACP sheet incl. cutting, wastage with necessary nails etc complete (Bettech / VIT / Interia) make
1
115
115
... More
Providing and fixing of S/S curtain rod pipe with side brackets and finners complete
1
175
175
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete
-
-
-
... More
20 mm dia
1
413
413.95
... More
25 mm dia
1
534
534.35
... More
Painting on GS Sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
1
80
80.5
... More
Providing and fixing of S/S Honour board / Name Plate incl. writing, engraving, painting etc complete item
1
25
25
... More
Providing and fixing of Brass Honour board / Name Plate incl. writing, engraving, painting etc complete item
1
35
35
... More
Providing and fixing of A grade wallpaper laid on smooth surface of wall with necessary adhesive. Selection of color, material and thickness and quality as per the directions of consultant/ Engineer in charge.
1
125
125
... More
Providing and fixing of 4mm thick Charcoal sheet press on WPC board/ ACP Sheet with adhesive. Complete job. Material and thickness, quality as per the consultant/ Engineer in charge.
1
450
450
... More
Providing and applying Total Excel paint one or more coat on old surface. Complete.
1
22
22
... More
Providing and applying Beauty gold Interior Emulsion paint one or more coat on old surface. Complete.
1
15
15
... More
Providing and fixing of 10mm thick Tougnened glass. Complete.
1
400
400
... More
Providing and fixing of Granite Honour board of size 2'x3' incl. writing, engraving, painting etc complete item
1
9500
9500
... More
Providing and fixing of Film on the centre of toughened glass
1
20
20
... More
Providing and fixing of Ornamental film on the toughened glass as per the required design and pattern
1
190
190
... More
Brass Door lock Round Golden shade
1
2000
2000
... More
PVC seat cover for wall hung seat (Hindware)
1
3800
3800
... More
Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm
1
268
268.45
... More
Carriage of material by mechanical transport incl. loading / unloading, stacking at site of work:-
-
-
-
... More
Stone Aggregate above 40mm nominal size (average lead 15.00 kms)
1
374
374.49
... More
Stone Aggregate below 40mm nominal size (average lead 15.00 kms)
1
344
344.49
... More
Sand (average lead 15.00 kms)
1
344
344.49
... More
Bricks (average lead 15.00 kms)
1
918
918.65
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements