Public Works Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Works Department - PWD Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date5 Jul 2024
Closing DateCancelled
Tender Amount₹ 51,00,000
Costs
EMD
₹ 1,02,000Document Cost
₹ 1,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWDJK_249759_3Tender No
SHORT e-NIT No. 06 of 2024-25 Dated 10-06-2024Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Extra for scraping, cleaning and straightening reinforcement from R.C.C or R.B work.
1
6
6.95
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
1
1458
1458.45
Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in cement mortar
1
4
4.94
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead
-
-
-
of area of 3 Sqm. and below
1
285
285.25
of area beyond 3 Sqm.
1
390
390.5
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead
-
-
-
of area of 3 Sqm. and below
1
110
110.05
of area beyond 3 Sqm.
1
145
145.75
Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead
1
83
83.45
Demolishing mud phaska in terracing and disposal of material within 50 meters lead
1
647
647.15
Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead
1
38
38.9
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)
1
532
532.75
Renewing glass panes, with putty and nails wherever necessary including raking out old putty
-
-
-
Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)
1
991
991
Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm)
1
1130
1130.85
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level.
-
-
-
1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size)
1
4826
4826.5
1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone agg. 40mm nominal size)
1
5202
5202.9
1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size)
1
5733
5733.6
1:2:4 (1 cement : 2 coarse sand :4 graded crushed stone agg. 20mm nominal size)
1
6591
6591.25
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
Extra for brick work/tile brick/AAC block masonry in superstructure above floor V level for each four floors or part thereof by mechanical means
1
142
142
Extra for brick work in square or rectangular pillars.
1
756
756.1
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
947
947.25
Extra for half Brick masonry in superstructure above plinth level upto floor V level.
1
159
159.65
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
1
416
416.5
Centering and shuttering including strutting, propping etc and removal of form work for:-
-
-
-
Foundation, footing, bases of columns.
1
286
286.35
Suspended floors, roofs, Landing, balconies and access platform.
1
718
718.2
Shelves (Cast in Situ)
1
718
718.2
Edges of slab and breaks in floors and walls under 20 mm wide
1
262
262.2
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9821
9821.85
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
Reinforcement for R.C.C work incuding straightening cutting, bending, placing in position and binding all complete, Thermo-Mechanically Treated bars of grade Fe-500D or more
1
123
123.2
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
1
181
181.6
Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead
1
545
545.75
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead
1
51
51.45
White washing with lime to give an shades
-
-
-
Old work (Two or more coats)
1
17
17.75
Old work ( One or more coats)
1
10
10.8
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc complete.
1
14
14.5
Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50 grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work
1
50
50.75
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1
18
18.7
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work
1
88
88.6
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work
1
86
86.75
15 mm cement plaster on the rough side of single or half brick wall of mix
-
-
-
1:6 (1 cement : 6 coarse sand)
1
306
306.85
1:4 (1 cement : 4 coarse sand)
1
327
327.85
20 mm cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand)
1
362
362.65
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
1
164
164.6
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface
1
66
66.85
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1
185
185.2
Finishing walls with water proofing cement paint of required shade
-
-
-
New work (Two or more coats) applied @ 3.84 Kg/10Sqm
1
98
98.75
Old work (One or more coats) applied @ 2.20 Kg/10Sqm over priming coat of primer applied @ 0.80 ltrs./10 Sqm complete including cost of priming coat.
1
94
94.85
Applying priming coat
-
-
-
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
1
53
53.6
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work
1
86
86.75
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
1
136
136.75
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work
1
131
131.85
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick
1
138
138.1
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick
1
181
181.05
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work-exposed on wall with clamps at 1.00 meter spacing
-
-
-
1216 (16mm OD) pipe
1
289
289.3
1620 (20 mm OD) pipe
1
322
322.4
2025 (25 mm OD) pipe
1
425
425.1
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc.
-
-
-
1216 (16mm OD) pipe
1
492
492.35
1620 (20 mm OD) pipe
1
515
515.7
2025 (25 mm OD) pipe
1
632
632.85
Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc Internal work-Exposed on wall (Surya, Jindal Make)
-
-
-
15 mm dia nominal bore (Medium)
1
360
360.55
20 mm dia nominal bore (Medium)
1
431
431.2
25 mm dia nominal bore (Medium)
1
529
529.7
Providing and fixing G.I Pipes complete with G.I fittings excluding trenching and refilling etc (External work) (Surya, Jindal Make)
-
-
-
15 mm dia nominal bore (Medium)
1
206
206.5
20 mm dia nominal bore (Medium)
1
255
255.2
25 mm dia nominal bore (Medium)
1
339
339.25
Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete. (New work) (Surya, Jindal Make)
-
-
-
15 mm nominal bore
1
264
264.25
20 mm nominal bore
1
288
288.3
25 mm nominal bore
1
320
320.4
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes
-
-
-
75 MM dia pipe
1
226
226.15
110 MM dia pipe
1
366
366.3
Providing and fixing on wall face un-plasticized - PVC moulded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Bend 87.5°
-
-
-
75mm dia bend
1
114
114.05
110 mm dia Bend
1
183
183.05
Providing & fixing white vitreous China pedestal type water closet (Europen Type) with cistern (A/PHAS-100+Cat No. 21054) with CP bolts, nuts, CI chair hanging arrangements, bakelite seat & cover with CP hinges & rubber buffers, CP brass screw, washer with all accessories with WC connector with rubber lip/ buffer and side gap filled with silicon sealant wherever required. including brass/ SS screws and washer complete including cutting, making good the walls, floors, slab wherever required as per direction of engineer in charge
1
12000
12000
Providing & fixing of white vitreous china wash basin with pedestal (Hindware Cat No. 1008+ Pedestal Cat No. 11003) with CP brass waste assembly, CP cast brass bottle trap with extension piece (Jaguar Cat No. 769B+Parko 1535 or approve equivalent), 450 mm long CP Copper connecting pipes (Jaguar Cat No. 803B or Parko 1535 or approved equivelent) wall flanges and rubber adopters for waste connection complete including CI/MS brackets duly painted, nuts, washers, cutting and making good the walls floors wherever required as per direction of Engineer- in- charge.
1
8000
8000
Providing & fixing CP single liver extended basin mixer (Height 85 mm) without popup waste system with 450 mm long braided hoses and brass trap with all fittings and accessories as per direction of engineer in charge (Jaguar FUS 29023B)
1
4800
4800
Providing & fixing CP hand spray with lever control (health faucet) (Jaguar Cat No. ALDCHR-565) and flexible hose 1.0 mtr long connection with CP holder for hand spray complete in all respects as per direction of engineer in charge.
1
1500
1500
Providing & fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 a) 15 mm nominal size (Make Jaguar FUS 29053).
1
1700
1700
Providing & fixing of Soap Dish Holder with all fittings as per direction of engineer in charge (Jaguar Cat No. ACN 113N).
1
700
700
providing & fixing 6 mm copper backed float glass mirror MODI/ SAINT- GOBAIN including 6 mm thick BWR type ply wood, 40 mm stainless steel channel plugged to wall, hard wood treated with two coats of wood preservative etc. All complete as specified and shown in drawing complete to the statisfaction of engineer in charge.
1
2600
2600
providing & fixing brass towel ring square with round flenge of approved make complete with all fittings (Jaguar Cat No. ACN 11021 BN)
1
1100
1100
Providing & fixing of glass shelf 600 m long with all CP fittings of approved quality complete item (Jaguar Cat No. ACN 11071 N).
1
1500
1500
Providing & fixing toilet holder with all fittings Jaguar Contienal ACN 1153 N.
1
1300
1300
Providng & fixing 15 mm dia CP brass bib cock with wall flange of approved quality conforming to IS standard (Jaguar Cat NO. 29037)
1
2200
2200
Providing & fixing regular body of concealed stop cock suitable for 15 mm pipe line with protection cap (Jaguar ALD-083) with exposed part angular stop cock with flange FUS 29.53
1
2500
2500
Providing & fixing heavy class SS grating with cockroach proof SS stramer of approved design including floor trap & setting in floor with cement motor to match with floor finish as per direction of engineer in charge (Size 100 mm dia (ISI marked)
1
259
259
Providing and fixing of CP brass 2 in 1 wall mixer Jaguar MAKE
1
8000
8000
Providing and fixing of CP brass basin mixer Jaguar MAKE
1
5000
5000
Providing and fixing of CP brass waste coupling full length for wash basin etc
1
880
880
Providing and fixing of plain CP jali
1
120
120
Providing and fixing of cp brass cap
1
50
50
Providing and fixing of CP brass nipple (12-25) mm long Jaguar MAKE
1
170
170
Providing and fixing of CP brass nipple (12-37) mm long Jaguar MAKE
1
190
190
Providing and fixing of CP brass nipple (12-100) mm long Jaguar MAKE
1
230
230
Providing of CP brass liquid soap Dispenser
1
2200
2200
Providing and fixing of powder coated aluminium 50 microns in partitions including glazing with float glass pane of minimum 5mm thickness or 12mm thick particle board decorative on both sides average spacing between each aluminium members should not exceed 0.9m c/c both horizontally and vertically. Complete including all harware items ie Handles, hinges, tower bolts, door, closer, Aldrop, rubber sealing etc. Including all types of doors and windows. (Double shutters for doors and windows will be paid for separately)
1
850
850
Waste couplling
1
250
250
Phase
1
150
150
Long nose bib cock
1
1450
1450
PVC connection pipes
1
150
150
Waste pipes
1
240
240
ball valves-3/4''
1
450
450
ball valves-(1/2)"
1
375
375
Chrome Plated (CP)Towel Ring Jaguar MAKE
1
400
400
Seat cover Jaguar MAKE
1
900
900
C.P Jet sprayJaguar MAKE
1
250
250
C.P pillar cock Jaguar MAKE
1
1350
1350
Acid for cleaning of chocked Waste pipes
1
50
50
CP Soap dish container
1
250
250
Providing and Fixing of Stainless steel Gate of grade 304 of Jindal Make
1
1500
1500
Providing and Fixing of Stainless steel Railing of grade 304 of Jindal Make of minimum height 0.9m. The minimum horizontal member in the railing should be 4 in nos including top rail. The verticles post should be 1.5m centre to centre and intermediate post should be provided on each step including main posts at each corner.
1
1000
1000
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1
8
8.75
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
11533
11533.5
Extra for depth. for man holes of Size 90x80cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
9059
9059.2
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) For fixed portion
-
-
-
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
481
481.95
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
514
514.3
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion For shutters of doors, windows & ventilators incl. providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprane gasket required (fittings shall be paid for separately).
-
-
-
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
574
574.45
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
607
607.4
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides
1
933
933.35
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness
1
2407
2407.05
Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete
1
456
456.4
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete
-
-
-
300 x 16mm
1
298
298.75
250 x 16mm
1
251
251.95
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete.
-
-
-
200 x 10 mm
1
95
95.35
150 x 10 mm
1
83
83.8
100 x 10 mm
1
63
63.35
Providing and fixing alumnium handles ISI marked anodised (anodic coating not less than grade AC as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete.
-
-
-
125mm
1
68
68
100mm
1
60
60
75mm
1
51
51.95
Providing and fixing in position collapsible steel shutters with vertical channels 20x 10x2 mm and braced with flat iron diagonals 20 x5 mm size with top and bottom rail of T- iron 40x40x6mm with 40 mm dia, steel pulleys complete with bolts, nuts, locking arrangment, stoppers, handles, including applying a priming coat of approved steel primer.
1
10401
10401.5
Providing & fixing panelled or panelled & glazed shutters for Doors and windows & clerestoy windows incl. ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid separately, all complete as per direction of Engineer-in-charge.
-
-
-
Second class Deodar wood : 30mm thick
1
3284
3284.7
Second class Deodar wood : 35mm thick
1
3665
3665.8
Providing & fixing panelling or panelling & glazing in panelled or panelled and glazed shutters for doors, windows & clerestory windows (Area of opening for panel insert excluding portion inside Grooves or rebates to be measured) panelling for panelled or panelled & Glazed shutters 25mm to 40mm particle board 12mm thick,
1
1367
1367.25
Providing and fixing 35mm thick wire gauge shutters using Galvanised M.S wire gauge of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clear story windows with hinges and necessary screw & including ISI marked bright M.S bright finished M.S Butt hinges with neceaasry screw of required size. Second Class Deodar wood.
1
4256
4256
Providing and fixing wooden moulded beading to doors & windows frames with iron screws, plugs & priming coat on unexposed surface etc complete. 2nd class Teak wood
-
-
-
50x12mm
1
214
214.75
50 x 20mm
1
275
275.05
Providing & fixing curtain Rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass Brackets fixed with C.P Brass screws & wooden plugs etc wherever necessary complete.
-
-
-
20mm dia
1
318
318
25mm dia
1
398
398.25
Providing and fixing tiles false ceiling of approved material of 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @ 120 Sqm. both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30 thick sheet 1200mm lay spaced between man "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600mm size 24x25mm made of 0.30 mm thick sheet to be interlocked at middle of 1200 x 600mm panel to form grids of 600x600 and wall angle of size 24x24x0.30mm laying false ceiling tiles of approved texture in the grid. including, wherever required cutting/making, opening for services like diffusers, grills, light fittings, fixtures smoke detectors etc Main "T" runners to be suspsnded form ceiling using G.I slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mtr. long dash fasterners 4mm G.I adjustable rods with galvanised butterfuly level clips of size 85x30x0.8mm spaced at 1200mm center to center along main T, bottom GI Metal ceiling lay in perforated Tegular edge globawhite color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop made of GI sheet having galvanizing of 100 gm/sqm (both sides inclusive) and 20% perforationarea with 1.8 mm dia holes and having NCR (Noice Reduction Coefficient) of 0.5 electro statically polyesterpowder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
1
1760
1760.5
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 kg/Cum of earth and gobri leeping with bhusa at 3.5kg/cum 8 earth and mixed with 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed (1 cement : 3 fine sand) with 2% of integal water proofing compound by weight of cement and finsihing neat with hand moulded FPS brick tiles.
1
1063
1063.8
Extra for every additional 1 cm thickness of mud phaska.
1
20
20.4
Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone 10mm down gauge) incl. finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75 x 75mm deep chase.
1
241
241.45
Making khurras 45x45cm with average min. thickness of 5cm cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) over pvc sheet 1mx1mx400 micron finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
1
262
262.9
Providing and laying water proofing treatment in sunkan portion of WCs, bathroom etc. by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. b)Second layer of sullary of cement @ 04242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curring for 48 hours. The Rates includes prepration of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.
1
485
485.1
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm b) Laying of second layer of fiber glass cloth when the first layer is still green.Overlaps of joints of fiber cloth should not be less than @0.253 kg/sqm c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @0.670 kg/sqm and coarse sand @1.289 kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around d) forth and final layer of brick tiling with cement mortor (Which will be paid for separately) for the purpose of measurement the entire terated suface will be measured.
1
556
556.2
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement incl. cement slurry but excluding the cost of nosing of steps etc complete.
-
-
-
40 mm thick with 20 mm nominal size stone agg (Crushed)
1
510
510.25
50 mm thick with 20 mm nominal size stone agg (Crushed)
1
562
562.15
Providing and fixing gang saw cut mirror polished (pre moalded and pre polished) machine cut for kitchen, platform, vanity counters, window sills facias and similar locations of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement matching pigment, epoxy touch ups including rubbing moulding and polishing to edge to give high gloss finisg etc complete at all levels. Granite of any colour and shape (area of slab upto 0.50 Sqm)
-
-
-
16mm thick
1
4550
4550.35
Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge. Granite work
1
381
381.7
Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)
1
246
246.2
Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S Flats square or round bars etc incl. priming coat with approved steel primer all complete.
-
-
-
Fixed to steel windows by welding
1
212
212
Fixed to openings / wooden frames
1
231
231.15
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm
1
1395
1395.1
Providing & fixing of PVC Panelling (Hard) in walls of approved brand incl. necessary screws & fittings as per directions of Engineer in charge all complete job
1
900
900
Supply of labour for repair works
-
-
-
Black smith Ist class
1
806
806
Carpanter Ist class
1
806
806
Carpenter 2nd class
1
734
734
Mason Ist class
1
806
806
Mason 2nd class
1
734
734
Painter
1
734
734
Mazdoor
1
553
553
Malli
1
553
553
Sweeper
1
553
553
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared
1
12
12.49
Hire charges for temporay water proofing tent (with tarpaline) complete job
1
52
52.9
Hire charges for providing & laying foam matting (25 mm thick) complete job
1
8
8
Hire charges for providing & installation of teble with paper roll extra - complete job
1
100
100
Hire charges for providing & installation of plastic chairs- complete job
1
10
10
Hire charges for providing & installation of plastic VIP chairs- complete job
1
20
20
Hire charges for providing & installation of pedestal fan - complete job
1
130
130
Hire charges for providing & installation of Drinking water Camper - complete job
1
30
30
Hire charges for Sofa (2 seater)
1
700
700
Hire charges for Dice
1
400
400
Charges for refreshment
-
-
-
Lunch
1
250
250
Tea / Snacks
1
50
50
Hire charges for providing & installation of Shamiana of size 15'x15' with side curtain - complete job
1
1250
1250
Carriage of material by M.T incl loading/unloading & stacking complete
-
-
-
Brick av. Lead 40 km
1
1681
1681.75
Brick tile av. Lead 40 km
1
1009
1009.08
Sand av. Lead 15 km
1
344
344.49
Stones Av. Lead 15 km
1
405
405.31
Stone agg. Below 40 mm nominal size av. Lead 15 km
1
344
344.49
Stone agg. Above 40 mm nominal size av. Lead 15 km
1
374
374.49
Disposal of mulba 3 km
1
165
165.84
Electrification
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
1
1015
1015
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1
334
334
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1
275
275
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 1 x 1.5 sq. mm
1
45
45
Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required. 25mm
1
145
145
Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required.
1
586
586
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
1
676
676
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 Amp modular socket outlet and 25 Amp modular with MCB, "C" curve including connections, painting etc. as required.
1
727
727
5/6Amp Switch
1
103
103
3 pin 5/6 Amp socket outlet
1
122
122
15/16 A switch
1
156
156
6 pin 15/16 A socket outlet
1
197
197
Bell Push
1
140
140
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1
369
369
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
1
40
40
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
8 way (4 + 24), Double door
1
5967
5967
Supplying and fixing single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 6 way Double door
1
2206
2206
Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Single pole)
1
256
256
Supplying and fixing following Electrical items complete with connections as required.
-
-
-
SPN 63 Amp
1
1050
1050
SPN 40 Amp
1
950
950
Fan Box
1
80
80
M.S Deep Box
1
55
55
Phenolic laminated round sheet 4" dia average
1
12
12
S/F of 16 sq mm twin core almunium cable
1
110
110
S/F of 10 sq mm twin core almunium cable
1
60
60
Angle batten holder
1
35
35
Supplying, installation, testing & commisioning of 20 Watt 4 ft long batten type LED tube lights
1
500
500
Supplying and fixing of following electrical items suitable for operating on 240/230Volts AC, 50 Hz supply.
-
-
-
Exhaust fan 300 mm sweep
1
2000
2000
Supplying and fixing of ceiling fan 1200 mm sweep
1
2200
2200
Supplying and fixing of LED street light 70 Watt alongwith wiring with 2 x 1.5 + 1 x 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc. and bracket of suitable size as required
1
7000
7000
Labour charges for electrician
1
806
806
Labour charges for welding
1
553
553
Labour charges for Mali
1
553
553
Prividing & fixing of PVC wall paneling complete job.
1
800
800
Prividing & fixing of wall paper complete job.
1
1050
1050
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements