Public Works Department Tender

Supply, Laying, Testing and Commissioning of 6 sq mm x 3 core submersible cable for pump connection and conduting arrangement including Excavation work.Havells/Polycab/LS Make.

Supply, Laying, Testing and Commissioning of 4 sq mm x 4 core submersible cable for light connection & conduting arrangement up to control room including Excavation work.Havells/Polycab/LS Make.

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER ROD EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value. Supply,Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 12 SWG 6mm copper earthing solid type wire as required in one run (for both fountain motor & Control Panel fitted) with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through suitable DWC High Density Poly ethylene Pipe having Corrugation complete job.

Supply/Fixing of PVC conduit Pipe with fittings ,jointing material for interconnections etc

Restoration of Power Supply to Garden lights of Parks B.W.O New Wiring in 3x1.5 Sq.mm FRLS Havells/Polycab/RR-Kabel/Anchor make.

Supply/Fixing of 8 way, 100 Amp bakelite terminal block connector of ISI Standard Make.

Supply/Fixing of Polycarbonate white outdoor globe(Moon/Mushroom/Athena1-3 etc Havells or equivalent make with suitable base,holder for holding upto 40Watt lamp on existing decorative poles at children park and choice of globe shall be done as per site incharge.The Job further includes Supply/Fixing of 20 Watt LED Lamp(White) Havells/Philips/Wipro make Also S/F of suitable sizes of Nuts/Bolts to be installed on existing 3 Mtr G.I Poles.

Supply,Installation,Testing and Commissioning of 120Watt Industrial Type LED street light of ENDURAPEARLPLUSSL120WLED757PASYTOPCLC of Havells/Bajaj/ Philips/Ledvance Make and to be installed on existing 9 Mtr Steel Tabular pole.

Providing & Fixing of IK08 IP-66 protected high power 100 Watt LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy =125 Im/wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety .Power Factor 0.95 , THD(I) 10% , driver current =750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min =4KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR:-High Power LED Flood Light Minimum lumen output 12500 Im of JETAIRISFL100WLED757ARWBLTG of Havells/Crompton/Philips Make as approved and to be installed on outside block.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department amd to be installed on existing 9 Mtr Steel Tabular pole.

Supply/Fixing of Black Powdered Coat Iron plate (8x4.5)/(10x8) inches of size of 18SWG for suitable number of ornamental poles only including S/F of suitable size of nuts & bolts for pole box.

Topping of existing Suitable AVR B.W.O Supply/Filling of Oil. HP/Indian Oil/Equivalent.

The Uninstallation/Dismantle of old/ damaged/unserviceable worn out material & to be handed over to intending department.

Supply/Laying/Connecting and Commissioning of 16 sq.mm 4-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/LS Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories forProtection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench.

Supply/Fixing/Testing and Commissioning of 6Amp to 32Amp SP Rating ,240v,*C* Curve 10K, Miniature Circuit Breaker suitable for inductive load Complete with connections. (Havells/L&T/Siemens/Legrand/ABB /Schneider Make) and to be fit into existing pole box.

Painting of existing 9/13 Mtr ST Poles of each core (Red Oxide & Aluminium Paint)

2-Core Black Painting of existing 3 Mtr G.I Poles.

Supply, Installation, Testing and Commissioning of 1-Phase 01 HP Residential water pump with Self-Priming Regenerative Operation to make it efficient in repeated intermittent operations. High Flow Rate with 2700 Litres per hour & maximum Head is 34 Meter with Starter of Crompton/Havells/Kirloskar Make.