Public Works Department Tender

Providing and laying of M15(1:2:4) Cement Concrete pole block of size ( 3ʹ x 3ʹ x 5ʹ)having 4ʹ U/G & 1ʹ A/G including cost of form work,Curing,Finishing & Base Mesh Reniforcement having 12mm dia main as well as temperature (spacing 6 inch C/C)The job includes all charges(Complete Job).

Supply/Installation/Testing and Commissioning of IK08 IP-66 protected high power 200 Watt.LED flood light system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy =125 Im/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @›=300 V AC and Auto resetting Safety Power Factor 0.95, THD(1) 10%, driver current =750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min =4KV internal and 10K external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. connection wires Havells/Philips/Wipro /HG make.

Supply/Fixing/Testing and Commissioning of 6 Amp to 10 Amp Rating ,240v,*C* Curve 10K,SP Miniature Circuit Breaker suitable for inductive load and to be fitted in existing poles Complete with connections includes its thimbling (L&T/Havells/Siemens/Legrand /Schneider Make)

Design,Supply, Installation, Testing and Commissioning of CPRI Approved (IS/IEC:61439) Main LT Control Double Door feeder panel outdoor type fabricated out of 16 gauge sheet steel. The feeder panel should have standing rain/ dust & vermin proof with gasket lockable door of 16 gauge sheet steel. The Panel should be painted with Electro static powder coated colour, Siemens grey structural with proper chemical pre-treatment with film thickness 35-40 Microns,duly fitted with Voltmeter, R/Y/B Phase-indicators etc & angle iron 50x50x6mm stand painted in black colour of 2.5 feet height above ground level and underground 1.5 ft to be grouted in cement concrete block of suitable size with the cc ratio of 1:2:4 mix. (However the angle iron stand overall height 4 ft shall be increased or decreased upto 1.5 foot depending upon site conditions)The feeder shall be suitable size in length breadth and height to be fitted inbuilt the following items:- Incoming: 100 Amp-4 pole,35kA MCCB with extended terminals Adjustable Thermal & Fixed Magnetic L&T/schiender/Legrand/Simens Make. Outgoing: 150 Amp TPN Al. Bus bar & 02 No. 63 Amp 4 pole TPN MCB L&T/Legrand/Schneider/Microtek Make.Further the Feeder Panel shall have provision to accomodate 08 NO single pole MCB’S of required capacity and also having sufficient space for cable entries at the bottom side. In addition the feeder shall be provided with a set of indicator,volt/ampere meter, selectro switches,CTs & Auto Electronic ON-OFF Digital Timer switch and required capacity of contactor. for operation of day light control to Auto operation of illumination lightings.The panel shall include 100 A onlaod changeover switch

Supply ,installation ,testing , &commissioning of 20KVA 3 -Phase SERVO controlled VOLTAGE Stabilizer of Approved brand with following SPECIFICATIONS : (1). INPUT VOLTAGE: 156 Volt -450 Volts P-P (90V-260V N-P) (2). OUT PUT VOLTAGE : 400Volts+ 1%(230VAC) (3).Winding Material Insulation : 99.97% PURE COPPER WOUND FIBER GLASS (4). out DOOR TYPE (5). COOLING :OIL 1S 335 (6).MICRO CONTROLLED TRUE RMS Based LCD display (7). Protections are Over Load COPPER wound of /Chinar / Electric Field /Alba /AE /Cosco etc ISI/1SO certified for smooth functioning/ constant voltage supply having Technical Specifications : Input voltage= 90-260 volts & output voltage=220 volts+ - 2% Buck Boost Transformer Copper wound 99.9% ,OIL Immersed COOLING OIL ,High cut/Low Cut /Time delay / Over Cut through Micro Control and Spike Protection including ,Carriages ,installation charges , testing & taxes complete job

Providing/fixing satnd/foundation, stand made with structural GI channel iron legs 75*40*40*6mm long and GI angle iron 50*50*6 mm*7ft long fabricated , GI plate Top of 4'*3',3mm thick weled with legs/braces of standard concrete block in 1:2:4 ration of 18"*18"*24" deep pit for mounting AVR as per given design, to be approved before installation

shelter:- A cannopy 4'*5' and 5' height CRCA sheets metal 2mm thick with 5' height having double rare/front doors lockable with opening for cable entry and powder coated pinted with red oxide and smoke grey paint 2 coats as per given design or as site requirement. To be approved before installation by site Engineer.

Supply/Laying/Testing and Commissioning of 25sq mm 4-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havel’s /with required size of thimbles dully crimped with hydraulic crimping tool including P/Fixing of saddles/clips with making of connection and Partially OVER HEAD if required & partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench.(Havells/Polycab/Finolex/Anchor Make). From output of panel to street lighting poles.

Providing of service connection and earthings to luminaire from the junction box in 2.5 sq mm PVC insulated, multicore copper wire .

Supply/Installation/Testing and Commissioning of IK08 IP-66 protected high power 50Watt.LED flood light (alongwith standard GI bracket), system with single piece Pressure diecast aluminium housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. Integrated potted driver as a unique BIS R number having efficiency more than 85% and in compliance to BIS certified and Trade mark certificate. The System level Luminaire efficacy =125 Im/ wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @›=300 V AC and Auto resetting Safety Power Factor 0.95, THD(1) 10%, driver current =750mA. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector, Surge Protection Min =4KV internal and 10K external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI70 and CCT 5700K 355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted.The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department. connection wires Havells/Philips/Wipro /HG make. 50 watt lights to be installed on outer periphery and inside periphery of 15 number of Auction platforms of fruit mandi .

Supplying and drawing following sizes of FRLS PVC insulated copper conductor,( Havell/Polycab/ Fenolex/ Anchor make.) single core cable in the existing surface/recessed steel/ PVC conduit as required including making necessary connections as required. (P+N+E)

(3 X 2.5 sq. mm

SITC of 160 A 3ph on-laod changeover switch alongwith enclosure

Supply/Laying/Connecting and Commissioning of 35 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/RR Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) From DT to Main panel for street lights.

ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystallineconductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 2OMM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job

SITC of TPN Al bus bar of standard quality complete with all related accessories ( To be installed at Auction sheds)

supply and fixingof twin core 10 sq mm alminium XLPE cable ( Havells/ Polycab/Finolex) make ( unarmoured)

SITC of 10 A DP MCCB alongwith enclosure ( schineder/Legrand/Havells) make

Supply/Laying of 25/32/38mm Dia and 2mm thick PVC Conduit of Anchor/Ravindra Blue/Finolex Make with other accessories like bends,etc complete to be laid on auction fruit sheds as per site requirement