Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date21 Oct 2024
Closing Date4 Nov 2024
Tender Amount₹ 1,37,10,000
Costs
EMD
₹ 2,74,200Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Construction Successful Testing Commissioning Of 0.18 Mgd Rapid Sand Filtration Plant Comprising Of Clarifloculator, Flash Mixer, Filter House, Back Wash Tank, Allied Works With All Electrical/mechanical Components.....wss Shoul Sarsuna
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_261300_1Bid Award Id
ViewTender No
31/PHE/BIJ OF 2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://jktenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Beyond 30 cm girth upto and including 60 cm girth.
1
379
379.05
Beyond 60 cm girth upto and including 120 cm girth.
1
1683
1683
Beyond 120 cm girth upto and including 240 cm girth.
1
7795
7795.7
Above 240 cm girth
1
15627
15627.5
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil)
1
187
187.3
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :
-
-
-
All kinds of soil :
1
89
89.75
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
-
-
-
All kinds of soil :
1
592
592.9
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
-
-
-
All kinds of soil :
-
-
-
1 meter from cutting edge
1
479
479.3
25 meter beyond 1 m from cutting edge
1
576
576.45
50 meter beyond 1 m from cutting edge
1
673
673.3
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
-
-
-
All kinds of soil :
1
256
256.85
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
1
167
167.8
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).
-
-
-
Depth exceeding 1.5 m but not exceeding 3 m
1
255
255.2
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1
218
218.4
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
1
65
65.9
Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1
276
276.6
Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing, ramming, all leads lifts and all carriages complete.
1
1320
1320
Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job
1
7700
7700
Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job
1
7968
7968
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
1
2412
2412
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
1
1204
1204.5
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
1
6540
6540.45
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
1
5673
5673.4
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9821
9821.85
Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9023
9023.35
Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
1
10377
10377.15
Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centering, shuttering, finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9588
9588.05
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
-
-
-
All works upto plinth level
1
8021
8021.1
All works above plinth level upto floor V level
1
9412
9412.05
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.
5.35.1 Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
1
98
98.8
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
1
280
280.95
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
1
941
941
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
1
286
286.35
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1
628
628.95
Suspended floors, roofs, landings, balconies and access platforms.
1
718
718.2
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1
577
577.55
Columns, pillars, piers, abutments, posts and struts.
1
742
742.55
Stairs (excluding landings) except spiral staircases.
1
851
851.15
Spiral staircases (including landings)
1
676
676.25
Arches, domes, vaults upto 6 m span
1
2281
2281.2
Extra for arches, domes, vaults exceeding 6 m span
1
1118
1118.85
Chimney and shafts
1
628
628.95
Extra for shuttering in circular work (20% of respective centering and Shuttering items)
1
-
0.2
Edges of slabs and breaks in floors and walls
1
262
262.2
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
1
293
293.9
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
1
63
63
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all
complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all
complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
116
116.25
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :
-
-
-
Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
7877
7877.4
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners
shall be paid for separately):
-
-
-
First class kail wood
1
108897
108897.35
Pre-laminated particle board with decorative lamination on both sides,Grade I, Type II IS : 12823 marked
1
1748
1748.4
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
First class kail wood (30 mm thick shutter)
1
2892
2892.1
Second kail wood (30 mm thick shutter)
1
2597
2597.75
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.
-
-
-
With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
-
-
-
With 2nd class teak wood beading 62x19 mm
1
1308
1308.35
4 mm thick glass pane (weighing not less than 10 kg/sqm)
1
1985
1985.85
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angles 40x40x6mm for diagonal braces.
1
5493
5493.9
Using flats 30x6mm for diagonal braces and central cross piece.
1
5338
5338.5
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. chequered plate wherever required, all complete.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required.
1
141
141.4
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1
181
181.6
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
M.S. tube
1
161
161.05
E.R.W. tubes
1
154
154.7
G.I. pipes
1
197
197.45
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1
120
120.8
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
-
-
-
Riveted and bolted
1
142
142.9
Welded
1
138
138.2
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
1
3305
3305
Providing and fixing ball bearing for rolling shutters.
1
531
531.55
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
-
-
-
40mm thick with 20 mm nominal size stone aggregate.
1
510
510.25
50 mm thick with 20mm nominal size stone aggregate.
1
562
562.15
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete
-
-
-
In colour such as White, Ivory, Grey, Fume, Red Brown (as dirrected by the engineer incharge)
1
1107
1107.65
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with:
-
-
-
Makrana White Second quality (16mm)
1
3316
3316.05
Extra for pre finished nosing to treads of steps of marble stone
1
553
553.7
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter.
1
644
644.25
12mm Cement plaster finished with a floating coat of neat cement of mix:
-
-
-
1 : 3 ( 1 cement : 3 fine sand)
1
370
370.75
1 : 4 ( 1 cement : 4 fine sand)
1
353
353.1
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1
241
241.25
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 15mm Cement plaster on the rough side of single or half brick wall of mix:
-
-
-
1 : 4 ( 1 cement : 4 fine sand)
1
327
327.85
1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
Pointing on brick work in 1 cement : 3 sand mix. flush/ruled/structure or weathered pointing
1
200
200.8
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1
98
98.75
Applying priming coat:
-
-
-
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood
1
61
61.4
With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
1
53
53.6
With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat)
1
28
28.85
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
-
-
-
Two or more coats on new work
1
131
131.85
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
1
194
194.65
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
-
-
-
On steel work
1
197
197.8
On concrete work
1
199
199.1
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
1
127
127.95
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.
1
164
164.6
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc.complete
-
-
-
125 mm
1
68
68
100 mm
1
60
60
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
150x10 mm
1
83
83.8
100x10 mm
1
63
63.35
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
0.50 mm thick with zinc coating not less than 275 gram/m2
1
852
852.5
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete
-
-
-
0.80 mm thick with zinc coating not less than 275 gram/m2
1
840
840.15
0.63 mm thick with zinc coating not less than 275 gram/m2
1
761
761.95
0.50 mm thick with zinc coating not less than 275 gram/m2
1
690
690.85
Providing and fixing plained eaves boarding. 2nd class kail wood
-
-
-
250x32 mm (nominal size )
1
702
702.55
300x40 mm (nominal size)
1
1007
1007.5
Providing and fixing of 0.5mm Color GS Sheet Soffit boarding including Backing, supports etc complete job
1
600
600
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
1 mm thick
1
138
138.1
2 mm thick
1
181
181.05
Providing and fixing G.I. pipes (B medium) complete with G.I. fittings excluding trenching and refilling etc. (external work)
-
-
-
15 mm dia. nominal bore
1
179
179.2
20 mm dia. nominal bore
1
227
227.9
25 mm dia. nominal bore
1
311
311.95
32 mm dia. nominal bore
1
384
384
40 mm dia. nominal bore
1
434
434.65
50 mm dia. nominal bore
1
532
532.8
65 mm dia. nominal bore
1
745
745.1
80 mm dia. nominal bore
1
878
878.25
100 mm dia. nominal bore
1
1255
1255.15
150 mm dia. nominal bore
1
2256
2256.9
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
80 mm dia. Class 1
1
10815
10815
100 mm dia. Class 1
1
13164
13164
125 mm dia. Class 1
1
15961
15961
150 mm dia. Class 1
1
20243
20243
200 mm dia. Class 1
1
31698
31698
250 mm dia. Class 1
1
50356
50356
300 mm dia. Class 1
1
62066
62066
350 mm dia. Class 1
1
147031
147031
Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job.
-
-
-
80 mm dia. pipe
1
1100
1100
100 mm dia. pipe
1
1520
1520
125 mm dia. pipe
1
1855
1855
150 mm dia. pipe
1
2150
2150
200 mm dia. pipe
1
3480
3480
250 mm dia. pipe
1
5030
5030
300 mm dia. pipe
1
7710
7710
350 mm dia. Pipe
1
9635
9635
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.
-
-
-
Serrated with central bulb (225 mm wide, 8-11mm thick)
1
283
283.25
Dumb bell with central bulb (180mm wide, 8mm thick)
1
229
229.75
Kickers (320mm wide, 5mm thick)
1
229
229.75
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage
1
554
554.1
Providing & fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge
1
800
800
Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.)
-
-
-
For fixed portion
-
-
-
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
481
481.95
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
514
514.3
Polyester powder coated aluminum (minimum thickness of
polyester powder coated 50 microns)
1
522
522.7
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
-
-
-
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
574
574.45
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
607
607.4
Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
1
616
616
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)
-
-
-
With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
1
1061
1061.95
With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
1
1584
1584.45
Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm
-
-
-
50 mm dia
1
530
530
62.5 mm dia
1
1110
1110
75 mm dia
1
1420
1420
100 mm dia
1
1990
1990
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND:
-
-
-
3 km
1
165
165.84
4 km
1
183
183.58
5 Km
1
200
200.74
Beyond 5 km upto 10 km per km
1
15
15.66
Beyond 10 km upto 20 km per km
1
13
13.09
Beyond 20 km per additional km
1
11
11.04
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate below 40mm :
-
-
-
3 km
1
165
165.84
4 km
1
183
183.58
5 km
1
200
200.74
Beyond 5 km upto 10 km per km
1
15
15.66
Beyond 10 km upto 20 km per km
1
13
13.09
Beyond 20 km per additional km
1
11
11.04
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above :
-
-
-
3 km
1
180
180.26
4 km
1
199
199.55
5 Km
1
218
218.19
Beyond 5 km upto 10 km per km
1
17
17.03
Beyond 10 km upto 20 km per km
1
14
14.23
Beyond 20 km per additional km
1
12
12
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling :
-
-
-
3 km
1
195
195.1
4 km
1
215
215.98
5 Km
1
236
236.16
Beyond 5 km upto 10 km per km
1
18
18.43
Beyond 10 km upto 20 km per km
1
15
15.4
Beyond 20 km per additional km
1
12
12.98
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Steel/ CGI Sheets:
-
-
-
3 km
1
147
147.41
4 km
1
163
163.19
5 Km
1
178
178.43
Beyond 5 km upto 10 km per km
1
13
13.92
Beyond 10 km upto 20 km per km
1
11
11.63
Beyond 20 km per additional km
1
9
9.81
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Earth:
-
-
-
3 km
1
207
207.3
4 km
1
229
229.48
5 Km
1
250
250.92
Beyond 5 km upto 10 km per km
1
19
19.58
Beyond 10 km upto 20 km per km
1
16
16.36
Beyond 20 km per additional km
1
13
13.8
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement:
-
-
-
3 km
1
147
147.41
4 km
1
163
163.19
5 Km
1
178
178.43
Beyond 5 km upto 10 km per km
1
13
13.92
Beyond 10 km upto 20 km per km
1
11
11.63
Beyond 20 km per additional km
1
9
9.81
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks:
-
-
-
3 km
1
442
442.23
4 km
1
489
489.56
5 Km
1
535
535.3
Beyond 5 km upto 10 km per km
1
41
41.77
Beyond 10 km upto 20 km per km
1
34
34.9
Beyond 20 km per additional km
1
29
29.43
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Timber:
-
-
-
3 km
1
189
189.53
4 km
1
209
209.81
5 Km
1
229
229.41
Beyond 5 km upto 10 km per km
1
17
17.9
Beyond 10 km upto 20 km per km
1
14
14.96
Beyond 20 km per additional km
1
12
12.61
Carriage of materials by manual means including loading, unloading, stacking of materials- (Sand)
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
43
43.69
Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate Below 40mm
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
43
43.69
Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate 40mm and Above
-
-
-
Ist 50m
1
216
216.94
Beyond Ist 50m
1
47
47.23
Carriage of materials by manual means including loading, unloading, stacking of materials- Stone Soling
-
-
-
Ist 50m
1
236
236.08
Beyond Ist 50m
1
51
51.4
Carriage of materials by manual means including loading, unloading, stacking of materials- Steel/CGI Sheets
-
-
-
Ist 50m
1
249
249.61
Beyond Ist 50m
1
36
36.63
Carriage of materials by manual means including loading, unloading, stacking of materials- Earth
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
43
43.69
Carriage of materials by manual means including loading, unloading, stacking of materials- Cement
-
-
-
Ist 50m
1
116
116.22
Beyond Ist 50m
1
17
17.05
Carriage of materials by manual means including loading, unloading, stacking of materials- Brick
-
-
-
Ist 50m
1
374
374.58
Beyond Ist 50m
1
81
81.56
Carriage of materials by manual means including loading, unloading, stacking of materials- Timber
-
-
-
Ist 50m
1
160
160.46
Beyond Ist 50m
1
23
23.55
Supplying and fixing of 25mm dia. medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
1
103
103.5
Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)
1
824
824.55
Providing and carrying out wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2-way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
1
1215
1215.55
Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
1
1300
1300
Providing and carrying out circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (excl. cost of conduit)
-
-
-
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
1
192
192.05
2 x 4 sq. mm + 1 x 4 sq. mm earth wire
1
230
230
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
569
569.25
Supply and fixing of two module stepped type Electronic Fan regulator on the existing modular plate switch box including connections but excl cost modular plate etc., as required.
1
393
393.3
Supplying and fixing single pole 5 A to 32 A rating, 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the MCB DB complete with connections, testing and commissioning etc. as required.
1
228
228.85
Supplying and fixing double pole 63 Amp 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in MCB DB complete with connections, testing and commissioning etc. as required.
1
442
442.75
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
1
74
74.75
Supply of 24-Watt LED slim aluminum panel surface type complete in all respects.
1
600
600
Supply of 1200 mm sweep Ceiling Fans complete in all respects. Confirming to relevant Indian Standards
1
2125
2125
Supply of 200 mm nominal sweep Exhaust Fans including shutter from outside complete.Confirming to relevant Indian Standards
1
1550
1550
Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1
193
193.2
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
196
196.65
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
1
417
417.45
Supplying and fixing 12-way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
2360
2360.95
Providing, fitting and testing of LED flood light IP65 30W rating to pre-wired electric points on the outside of the Filter House building.
1
1500
1500
Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc., from main transformer to the main panel board including copper thimbles, earth work excavation and filling for laying of cable complete.
1
325
325
Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job.
-
-
-
10 KVA
1
27000
27000
20 KVA
1
37000
37000
25 KVA
1
42000
42000
30 KVA
1
47000
47000
40 KVA
1
57000
57000
50 KVA
1
67000
67000
Providing and fitting of panel board with angle iron supports and A.C. sheets for fixing of MCCB, change over switch, bus bars etc. The job includes nuts bolts and embedding of supports in cement concrete blocks complete job.
1
4250
4250
Providing and fitting of:
-
-
-
200 Amp. 4 pole Change over of reputed make
1
11200
11200
100 Amp 4 pole change over of reputed make.
1
7598
7598
64 Amp. 4 pole Change over of reputed make
1
5000
5000
32 Amp. 4 pole Change over of reputed make
1
2500
2500
200 Amp 3-phase copper bus bar
1
7500
7500
100 Amp-Copper bus bar
1
4550
4550
64 Amp-Copper bus bar
1
3750
3750
32 Amp-Copper bus bar
1
2850
2850
100 Amp MCCB
1
3300
3300
63 Amp MCCB
1
2700
2700
40 Amp MCCB
1
2100
2100
16 Amp MCCB
1
1250
1250
6 Amp MCCB
1
630
630
3-phase indicator points
1
445
445
3-phase voltmeter and Amperemeters
1
1190
1190
Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm
-
-
-
50 mm dia
1
530
530
62.5 mm dia
1
1110
1110
75 mm dia
1
1420
1420
100 mm dia
1
1990
1990
Providing, fitting, testing and commissioning of following items for Flash Mixer:
-
-
-
Mixing device with reduction gear system
1
2500
2500
3-phase Electrically driven motor:
-
-
-
0.5 HP
1
2800
2800
0.75 HP
1
3400
3400
1.0 HP
1
4800
4800
Foundation \ Base plate
1
4548
4548
Starter along with necessary wiring upto motor
1
1680
1680
Providing, fitting, testing and commissioning of following itemn for Alum Dosing Unit-
-
-
-
Mixing device with reduction gear system.
1
2500
2500
3-phase electrically driven motors:
-
-
-
0.5 HP
1
2800
2800
0.75 HP
1
3400
3400
1.0 HP
1
4800
4800
Foundation / Base plate
1
4548
4548
Starter along with necessary wiring upto motor
1
1680
1680
P.V.C outlet, overflow system with fittings upto point of application
1
530
530
150mm dia drain out let
1
1350
1350
50 mm dia Service water piping.
1
530
530
Constant dozing unit with time device
1
1500
1500
Manually operated hoist
1
10000
10000
Providing, fitting, testing and commissioning of following itemns for Chlorine Dosing Unit-
-
-
-
Mixing device with reduction gear system.
1
2500
2500
3-phase electrically driven motors:
-
-
-
0.5 HP
1
2800
2800
0.75 HP
1
3400
3400
1.0 HP
1
4800
4800
Foundation / Base plate.
1
4548
4548
P.V.C outlet, overflow system with fittings upto point of application.
1
530
530
Starter along with necessary wiring upto motor
1
1680
1680
150 mm dia Drain out let
1
1350
1350
50mm dia service water piping
1
530
530
Constant dozing unit with time device.
1
1500
1500
Providing and fixing D.I. sluice valves Class 1 (with cap) complete with rubber insertions, bolts, nuts, extention rod, joint connector, supporting pedestal with base plate, top plate and necessary anchoring bolts etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
80 mm dia.
1
14058
14058
100 mm dia.
1
17210
17210
125 mm dia.
1
21000
21000
150 mm dia.
1
26720
26720
200 mm dia.
1
42300
42300
250 mm dia.
1
66440
66440
300 mm dia.
1
83100
83100
350 mm dia.
1
181060
181060
Providing fitting, testing and comissioning of air blower standard make ISI mark capable of providing compression @ 0.35 kgs/sqcm coupled with suitable 3 phase induction electric motor complete with auxiliary pipe system upto filter beds with pressure guage, Nozzles, foundation block, base plate, air check valve , non- return valve, Starter etc
-
-
-
2.10 KLPM Air blower with 2.0 HP Motor.
1
67500
67500
4.2 KLPM Air blower with 5.0 HP Motor.
1
87500
87500
8.2 KLPM Air blower with 7.5 HP Motor.
1
125000
125000
10.6 KLPM Air blower with 10.0 HP Motor.
1
153400
153400
12.3 KLPM Air blower with 12.50 HP Motor.
1
163400
163400
16.80 KLPM Air blower with 15.0 HP Motor.
1
175400
175400
Up Wash Arrangements
-
-
-
Supply installation and successful testing and commissioning of mono block pumping unit standard make ISI mark coupled with 2 phase induction motor with appropriate pumping capacity so as to fill the tank within the max. of 2 hours with nominal dynamic head of 25m along with all accessories like foot valves, non- return valves, foundation block, base plate, suction pipe, suitable rising main with nominal dia 50mm (class-B) with heavey duty valves and other accessories required for the job.
-
-
-
Pumping unit with 5.0 HP Motor.
1
20268
20268
Pumping unit with 7.5 HP Motor.
1
29115
29115
Pumping unit with 12.5 HP Motor.
1
46486
46486
Pumping unit with 15.0 HP Motor.
1
49866
49866
P/F testing and commissioning of MS Rotating Desludging Bridge comprising of following items:
-
-
-
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for the Installation Testing and Commissioning of Half Bridge with Central Drive mechanism, scrapper and churners for required dia Clarifer.
-
-
-
Riveted and bolted
1
142
142.9
Welded
1
138
138.2
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
-
-
-
On steel work
1
197
197.8
On concrete work
1
199
199.1
Central axle turn table with double bearing and guide for incoming cable.
1
4800
4800
Peripheral drive assembly with following motors, gear box, rollers, drive trolly (60:1 reduction gear box).
-
-
-
Pumping unit with 2.0 HP Motor.
1
19120
19120
Pumping unit with 5.0 HP Motor.
1
24268
24268
Pumping unit with 7.5 HP Motor.
1
33115
33115
Starter along with necessary wiring upto motor
1
1680
1680
Flocculator drive assembly with crown wheel, pinion sets, reduction gear (40:1) with motors complete job.
-
-
-
0.5 HP
1
5300
5300
0.75 HP
1
5900
5900
1.0 HP
1
7300
7300
Incoming cable, telescopic electric pole with rotary current collector
1
6500
6500
Providing and laying/fixing S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes Class K-7 conforming to IS : 8329
-
-
-
100 mm dia
1
1379
1379.55
150 mm dia
1
1934
1934.7
200 mm dia
1
2222
2222
250 mm dia
1
2514
2514.45
300 mm dia
1
3141
3141.1
350 mm dia
1
3723
3723.8
400 mm dia
1
4459
4459.45
450 mm dia
1
5400
5400.6
Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement)
-
-
-
Up to 300 mm dia.
1
8539
8539.2
Over 300 mm dia.
1
8806
8806.75
Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job.
1
147
147
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
-
-
-
Ordinary Rock
1
940
940.3
Hard Rock (Requiring Blasting)
1
1312
1312.4
Hard Rock (Blasting Prohibited)
1
2218
2218.1
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil)
-
-
-
Ordinary Rock
1
392
392.8
Hard Rock (Requiring Blasting)
1
687
687.1
Hard Rock (Blasting Prohibited)
1
1128
1128.75
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
-
-
-
Ordinary Rock
-
-
-
1 meter from cutting edge
1
924
924.8
25 meter beyond 1 m from cutting edge
1
1013
1013.55
50 meter beyond 1 m from cutting edge
1
1102
1102.35
Hard Rock (Requiring Blasting)
-
-
-
1 meter from cutting edge
1
1316
1316.2
25 meter beyond 1 m from cutting edge
1
1405
1405
50 meter beyond 1 m from cutting edge
1
1493
1493.8
Hard Rock (Requiring Blasting)
-
-
-
1 meter from cutting edge
1
2273
2273
25 meter beyond 1 m from cutting edge
1
2261
2261.8
50 meter beyond 1 m from cutting edge
1
2350
2350.55
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
-
-
-
Ordinary Rock
1
493
493.5
Hard Rock (Requiring Blasting)
1
810
810.85
Hard Rock (Blasting Prohibited)
1
1196
1196.05
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :
-
-
-
Ordinary Rock
1
161
161
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements