Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date28 Aug 2024
Closing Date7 Sep 2024
Tender Amount₹ 2,01,54,000
Costs
EMD
₹ 4,03,080Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Construction Of Oht At Tail Ends Of Distribution System With Complete Electromechanical System Having 50000 G Capacity Oht At Fci Godown (including Operation And Maintenance)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_257579_2Tender No
E-NIT No. 34/WWD of 2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
-
... More
Beyond 30 cm girth upto and including 60 cm girth.
1
379
379.05
... More
Beyond 60 cm girth upto and including 120 cm girth.
1
1683
1683
... More
Beyond 120 cm girth upto and including 240 cm girth.
1
7795
7795.7
... More
Supplying and filling in plinth with fine sand under floors including, watering,
ramming, consolidating and dressing complete.
1
1204
1204.5
... More
Extra rates for quantities of works executed : In or under water and/ or liquid mud, including pumping out water as required. (20% of respective centering and Shuttering items) (Rate shown as 0.20 means 20% of the Respective item)
1
-
0.2
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
1
187
187.3
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil :
1
89
89.75
... More
Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
1
592
592.9
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :
1
479
479.3
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:All kinds of soil :
1
256
256.85
... More
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).
-
-
-
... More
Depth exceeding 1.5 m but not exceeding 3 m
1
255
255.2
... More
Depth exceeding 3 m but not exceeding 4.50 m
1
281
281.3
... More
Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified grade concrete mix, diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embeded in the pile cap etc. all complete including removal of excavated earth with all lifts and leads(Length of pile for payment Shall be measured from top of shoe to the bottom of pile cap) By percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete
-
-
-
... More
450 mm dia piles
-
-
-
... More
M-25
1
1941
1941.9
... More
M-30
1
1957
1957.55
... More
M-35
1
1973
1973.3
... More
500 mm dia piles
-
-
-
... More
M-25
1
2275
2275.5
... More
M-30
1
2294
2294.8
... More
M-35
1
2314
2314.25
... More
600 mm dia piles
-
-
-
... More
M-25
1
3095
3095.25
... More
M-30
1
3123
3123.1
... More
M-35
1
3151
3151.1
... More
750 mm dia piles
-
-
-
... More
M-25
1
4693
4693.95
... More
M-30
1
4737
4737.4
... More
M-35
1
4781
4781.1
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor pile method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer-in- Charge. Single pile upto 50 tonne safe capacity.
-
-
-
... More
Initial test (Test Load 2.5 times the safe capacity)
1
159533
159533
... More
Routine test (Test Load 1.5 times the safe capacity)
1
175486
175486.6
... More
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge ( chipping of pile heads)
1
2516
2516.85
... More
Providing and laying of dry Stone soling in horizontal on level including all carriages upto site of work
1
937
937.9
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
... More
1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
1
7275
7275.25
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
6591
6591.25
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
5733
5733.6
... More
Providing and laying cement concrete in kerbs, steps and the like at or near ground level including curing, excluding the cost of centring, shuttering, and finishing.
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7275
7275.25
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size)
1
6591
6591.25
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.
-
-
-
... More
1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)
1
9106
9106.5
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
8422
8422.45
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
7564
7564.8
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.
-
-
-
... More
All works upto plinth level
1
8021
8021.1
... More
All works above plinth level upto floor V level
1
9412
9412.05
... More
Extra for providing richer mixes at all floor levels.
-
-
-
... More
Providing M-30 grade concrete instead of M-25 grade
1
98
98.8
... More
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
1
941
941
... More
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
1
280
280.95
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1
7104
7104.35
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
... More
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
10377
10377.15
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9821
9821.85
... More
Reinforced cement concrete work in chimneys, shafts upto floor five level includingcuring complete but excluding the cost of centering, shuttering, finishing and reinforcement with:
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9588
9588.05
... More
Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9023
9023.35
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
1
286
286.35
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1
628
628.95
... More
Suspended floors, roofs, landings, balconies and access platforms.
1
718
718.2
... More
Shelves Cast in Situ
1
718
718.2
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1
577
577.55
... More
Columns, Pillars, Piers, abutments, Posts, Struts.
1
742
742.55
... More
Stairs (excluding landings) except spiral staircases.
1
851
851.15
... More
Spiral staircases (including landings)
1
676
676.25
... More
Arches, domes, vaults upto 6 m span
1
2281
2281.2
... More
Extra for arches, domes, vaults exceeding 6 m span
1
1118
1118.85
... More
Chimneys and Shafts
1
628
628.95
... More
Extra for shuttering in circular work (20% of respective centering and Shuttering items) (Rate shown as 0.20 means 20% of the Respective item)
1
-
0.2
... More
Edges of slabs and breaks in floors and walls
-
-
-
... More
Under 20 cm wide
1
262
262.2
... More
Above 20 cm wide
1
1145
1145.1
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).
-
-
-
... More
Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
1
293
293.9
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
... More
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification (1 kg of water proofing material in 50 kg of cement)
1
63
63
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of steel primer all complete.
-
-
-
... More
Welded
1
138
138.2
... More
Riveted and bolted
1
142
142.9
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming
coat of approved steel primer all complete.
1
120
120.8
... More
Providing & fixing 1mm thick MS sheet door with frame of 40x40x6mm angle iron & 3mm MS gusset plates at the junctions & corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using MS angles 40x40x6mm for diagonal braces
-
-
-
... More
Using M.S. angles 40x40x6mm for diagonal braces
1
5493
5493.9
... More
Using flats 30x6mm for diagonal braces and central cross piece.
1
5338
5338.5
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1
218
218.4
... More
Providing and laying water proofing treatment on horizontal/vertical faces by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound@0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken up to 30cm on parapet wall and tucked into groove in parapet all around. For the purpose of measurement the entire treated surface will be measured.
1
556
556.2
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservoir, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of selfhealing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm
1
407
407.75
... More
For horizontal surface one coat @1.10 kg per sqm.
1
310
310.05
... More
Providing & applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank & at the junctions of raft slab with the retaining walls etc. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer- In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
1
554
554.1
... More
Cement Plaster with a Floating Coat of neat Cement: 12 mm Cement plaster finished with a floating coat of neat cement of mix:
-
-
-
... More
1 : 4 ( 1 cement : 4 fine sand)
1
353
353.1
... More
1 : 3 ( 1 cement : 3 fine sand)
1
370
370.75
... More
Extra for plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof.
1
71
71.55
... More
Extra for plastering on circular work not exceeding 6m in radius: In one coat
-
-
-
... More
In one coat
1
37
37.8
... More
In Two coat
1
57
57.6
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
1
185
185.2
... More
Painting with PHE (Jal shakti) Logo at the Top Tank Level along with salient features of the OHT. The height of logo should not be less than 2.5 mtr in height and should be visible properly from a distance and the salient features should be writing in 3x3 sqm. Complete job.
1
8000
8000
... More
Providing & fixing of MS fittings viz bends of suitable degree, tees, collars etc to be fabricated from MS plate in required thickness as per the requirement of site including cost of welding, lead caulking . The work should be leakproof and should be painted with anti corrosive primer ans approved metal paint One Complete Job.
1
250
250
... More
Providing, fabrication of MS tubes of 32 mm dia in railings for stairs, filter beds, Tube Settler, etc including fabrication, welding, bending etc along with a base course of red oxide primer and metallic paint in approved shade and colour. Complete job.
-
-
-
... More
upto 300 mm dia
1
85
85.39
... More
above 300 mm dia
1
88
88.06
... More
Providing & fixing stainless steel (Grade 304) railing made of Hollow tubes channels,plates etc including welding,grinding, buffing, polishing & making curvature (wherever required) & fitting the same with necessary stainless steel nuts & bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1
753
753.75
... More
Supply and installation of satin finish stainless steel 304 stainless steel posts having 100mm dia tube, erected with chemical grout to be fixed on the top of slab/skirting (spigot fixed) at corners complete, as manufactured by D line or approved equivalent & shall be fixed above the finished level complete as per architectural drawings.
1
4000
4000
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. NOTE:- To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done
1
265
265.3
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
1
141
141.4
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates & similar works.
1
181
181.6
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
... More
M.S. tube
1
161
161.05
... More
E.R.W. tubes
1
154
154.7
... More
G.I. pipes
1
197
197.45
... More
Providing of 10/12mm thick MS flanges to pipe ends by way of welding of flanges to pipes. The item includes all types of labour and material and carriage involved. The item also includes cost for providing of nuts and bolts and rubber washers. R.I cloth etc complete job.
-
-
-
... More
150 mm Dia
1
1400
1400
... More
100 mm Dia
1
1100
1100
... More
80 mm Dia
1
950
950
... More
50 mm Dia
1
800
800
... More
Providing/fixing of Sluice Valves of heavy duty like Kirloskar/VAG/Talis or similar make subject to approval of Engineer In Charge including all types of necessary fittings, carriage etc complete job.
-
-
-
... More
150 mm Dia Sluice Valve
1
30000
30000
... More
100 mm Dia Sluice Valve
1
20000
20000
... More
Providing/fixing of Non Return Valves of heavy duty like Kirloskar/VAG/Talis make including all types of necessary fittings, carriage complete job.
-
-
-
... More
150 mm Dia NRV
1
11000
11000
... More
100 mm Dia NRV
1
8000
8000
... More
Supply, installation, testing and commissioning of Advanced Maintenance Free environment friendly Earthing system consisting of 1 no. of 3mtr length, 17.2 mm dia UL certified earth electrode made of high tensile low carbon steel circular rods, molecularly bonded copper on outer surface (minimum copper bonding thickness-250 microns) with GI terminals to connect incoming strips, (Environment friendly backfill compound duly certified as per ANSI/NSF standard 60/Toxic content certificate as safe for use near potable ground water resources strictly as per specification enclosed. Make- SHREE ELECTRODES/OBO BETTERMANN/ERICO (2 Nos UPS and 4 Nos Main L.T Panel/2 Nos Fire Fighting Panel) Earth pit chamber (300mm x 300mm) with CI cover for the above.
1
15800
15800
... More
Providing and Fixing 25 mm x 5 mm Copper Strip in 40 mm dia. G.I Pipe FRL Earth Electrode including connection with Brass nut ,bolt,spring,washer,excavation and refilling etc. as required.
1
1224
1224
... More
Supply, installation, testing and commissioning of lightening conductor made of 25 mm dia 300 mm long copper tube having single prong at top with base plate.
1
1500
1500
... More
Providing/fixing of level indicator or sensor of approved quality and manufacture made from Retro Reflective Al as per direction of engineer incharge including all sorts of carriage complete.
1
25000
25000
... More
Providing & fixing ventilator of size 450mm x 450mm made out of angle iron 40mm x 40mm with wire mesh of 25mm x 25mm size including welding charges & inlcuding all carriages upto site of work.
1
135
135.05
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished welded type tubes
1
156
156.95
... More
Hot finished seamless type tubes
1
171
171
... More
Electric resistance or induction butt welded tubes
1
142
142.9
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
50mm thick with 20 mm nominal size stone aggregate
1
562
562.15
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.
1
1455
1455.65
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
-
-
-
... More
Second class kail wood
1
101081
101081.85
... More
Kiln seasoned and chemically treated hollock wood
1
74353
74353.45
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
... More
Second kail wood 35 mm (35mm thick)
1
2853
2853.95
... More
Kiln seasoned and chemically treated hollock wood (35mm thick)
1
2483
2483.15
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class Kail wood
1
2305
2305.7
... More
Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of :
-
-
-
... More
12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848:
1
2736
2736.55
... More
12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade-I, Type-II marked :
1
2794
2794.05
... More
12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade-I, Type-II marked :
1
3044
3044.25
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :
-
-
-
... More
Second class Kail wood
1
3453
3453.55
... More
Kiln seasoned and chemically treated hollock wood (35mm thick)
1
3086
3086.95
... More
Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors,windows and clerestory windows with necessary screws: (shutter area to bemeasured)
1
142
142.35
... More
Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :
-
-
-
... More
5.0mm thick glass panes
1
1210
1210
... More
15mm Cement plaster on the rough side of single or half brick wall of mix:
-
-
-
... More
1 : 4 ( 1 cement : 4 fine sand)
1
327
327.85
... More
1 : 6 (1 cement : 6 fine sand)
1
306
306.85
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm).
1
98
98.75
... More
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.
-
-
-
... More
Serrated with central bulb (225 mm wide, 8- 11mm thick)
1
283
283.25
... More
Applying priming coat:
-
-
-
... More
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
1
66
66.85
... More
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
1
136
136.75
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
-
-
-
... More
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
1
194
194.65
... More
Providing and applying white cement-based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
... More
1 mm thick
1
138
138.1
... More
2 mm thick
1
181
181.05
... More
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329 and including all carriages upto site of work
-
-
-
... More
100 mm dia Ductile Iron Class K - 7 Pipes
1
2218
2218
... More
150 mm dia Ductile Iron Class K - 7 Pipes
1
3081
3081
... More
Supplying pig lead at site of work.
1
26758
26758.75
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) and all carriages upto site of work
-
-
-
... More
100 mm dia. nominal bore (Light)
1
1255
1255.15
... More
150 mm dia. nominal bore (Medium)
1
2256
2256.9
... More
80 mm dia. nominal bore (Light)
1
878
878.25
... More
65 mm dia. nominal bore (Light)
1
745
745.1
... More
50 mm dia. nominal bore (Light)
1
532
532.8
... More
40 mm dia. nominal bore (Light)
1
434
434.65
... More
25 mm dia. nominal bore (Light)
1
311
311.95
... More
20 mm dia. nominal bore (Light)
1
227
227.9
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as perthe sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1
706
706.5
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2
1
690
690.85
... More
Providing and fixing plained eaves boarding. 2nd class kail wood (300x40 mm (nominal size).
1
1007
1007.5
... More
Providing and fixing of 0.5mm colour G.S Sheet Sofit boarding including Backing, Supports etc. Complete job.
1
600
600
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).
-
-
-
... More
50 mm dia.
1
5159
5159.2
... More
80 mm dia.
1
6242
6242.9
... More
100 mm dia.
1
8201
8201.3
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1
157
157.3
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
1
1229
1229.1
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
1
1106
1106.05
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. s required.
-
-
-
... More
Upto 450mm Sweep
1
1000
1000
... More
Providing and installing electric ceiling fan / 1200mm BEE star rates ceiling fan.
1
2000
2000
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
-
-
-
... More
White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
5493
5493.25
... More
Providing and fixing brass bib cock of approved quality. 15 mm nominal bore
1
334
334.7
... More
Providing and fixing gyser of capacity 25 Ltr. Of quality make (Havells, Haquar, Crompton etc. including all required fittings and accessories complete Job).
1
8000
8000
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
1
4172
4172.4
... More
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
1
129
129.1
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
1
1474
1474.15
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet & overflow pipes but without fittings and the base support for tank
1
8
8.75
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.
-
-
-
... More
Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
... More
PN-16 pipe , 25mm OD(SDR-7.4)
1
461
461.9
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
100 mm inlet and 100 mm outlet Sand cast iron S and S as per IS:3989
1
1556
1556.4
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink:
-
-
-
... More
Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
1
596
596.3
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:
-
-
-
... More
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
1
731
731.25
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
Kitchen sink with drain board 18.11.1.1 510x1040mm bowl depth 250mm
1
6166
6166.9
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
1
582
582.35
... More
Providing and fixing PTMT stop cock of approved quality and color.
-
-
-
... More
15 mm nominal bore, 86 mm long, weighing not less than 88 gms.
1
203
203.55
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x0.90 mm M.S. laths with 0.90 mm thick top cover
1
2916
2916.1
... More
Providing and fixing ball bearing for rolling shutters.
1
531
531.55
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
207
207.35
... More
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :
-
-
-
... More
250x10 mm
1
373
373.35
... More
100x10 mm
1
159
159.85
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
... More
125 mm
1
68
68
... More
100 mm
1
60
60
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:
-
-
-
... More
2nd class teak wood ( 50 x 12 mm).
1
214
214.75
... More
Providing and installing of PVC pipes (working pressure 4kg/cm2) single socketed pipe 110mm /80mm dia with all necessary arrangements and fittings including Tee’s, Elbows and End Caps wherever required complete job.
1
427
427
... More
Providing and fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete hob as directed by Engineer – Incharge.
1
800
800
... More
Providing and carrying out wiring for heating points with 4.0 Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combine S&S 16Amp along wit the modular plate, suitable GI box and erarthing the point with 2Sqmm FRLS PVC insulated copper conductor single core cable etc. As required (including the cost of conduit).
1
1400
1400
... More
Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connecitons but excluding modular plate etc. as required.
-
-
-
... More
5/6A Switch
1
103
103
... More
3 Pin 5/6A Socket outlet 6Amp
1
122
122
... More
Pin 5/6A Socket outlet 16Amp
1
156
156
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.
-
-
-
... More
Made of G.I. wire of dia 4 mm
1
809
809.9
... More
Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge
-
-
-
... More
Anodized (AC 15) aluminum
1
89
89.15
... More
Providing and installing 8W Round Led Ceiling Light including wiring switch boxes and MCCB Sockets, ON and OFF 25mm complete PVC pipe.
1
2000
2000
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
150x10 mm
1
83
83.8
... More
200x10 mm
1
95
95.35
... More
Pumping out water caused by springs
1
167
167.8
... More
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.)
For fixed portion
-
-
-
... More
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
481
481.95
... More
Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
1
522
522.7
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
-
-
-
... More
Anodized aluminum (Anodized transparent or dyed to required
shade according to IS:1868, minimum anodic coating of grade AC 15)
1
574
574.45
... More
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
607
607.4
... More
Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
1
616
616
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.
-
-
-
... More
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.
1
947
947.4
... More
Pre-laminated particle board with decorative lamination on both sides.
1
933
933.35
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)
-
-
-
... More
With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
1
1061
1061.95
... More
With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
... More
With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
1
1584
1584.45
... More
Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete.
-
-
-
... More
Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
1
775
775.5
... More
Stainless steel (grade 304) wire gauze of 0.5mm dia wire and 1.4 mm aperture on both sides.
1
1014
1014.85
... More
Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
125x75x4 mm
1
132
132.8
... More
100x63x4 mm
1
106
106.85
... More
75x63x3.2 mm
1
78
78.2
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
200x10 mm
1
95
95.35
... More
150x10 mm
1
83
83.8
... More
Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge
-
-
-
... More
Powder coated minimum thickness 50 micron aluminum
1
95
95.85
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size).
1
207
207.35
... More
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:
-
-
-
... More
Budloo/ Fir wood
-
-
-
... More
50x12mm
1
143
143.7
... More
50x20mm
1
156
156.75
... More
Kiln seasoned and chemically treated hollock wood
-
-
-
... More
50x12mm
1
160
160.25
... More
50x20mm
1
184
184.25
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5 mm at 450mm centre to centre, shall befixed in a direction perpendicular to G.I. intermediate channel withconnecting clips made out of 2.64mm diaX230 mm long G.I. wire at everyjunction, including fixing perimeter channels 0.5mm thick 27mm highhaving flanges of 20mm and 30 mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450 mm centre to centre, with25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)
1
1350
1350.65
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
-
-
-
... More
25 to 40 mm nominal bore
1
730
730.25
... More
50 to 80 mm nominal bore
1
1387
1387.25
... More
Carriage of material by mechanical transport
-
-
-
... More
Stone aggregate 40 mm nominal size and above Avg lead 35 Km
1
625
625.64
... More
Sand, stone aggregate below 40 mm nominal size Avg lead 35 Km
1
575
575.54
... More
Bricks
1
1
1.53
... More
Cement, and Steel Avg lead 10 Km
1
248
248.03
... More
STAGE-IST
-
-
-
... More
Supply, Installation, Testing & Commissioning of Submersible Pumping Unit as per IS 8034 with following specification are as under :
PUMP : Discharge= 4000 GPH Head = 35 Meter Speed = 2900 Rpm
Type of pump = Mixed flow. Type of fluid to be handled = Tubewell
MATERIAL OF CONSTRUCTION:
Impeller = Stainless Steel Pump Shaft = Stainless Steel SS 410.
Pump Casing = Cast Iron/Stainless steel
IMPELLER: Impeller is of the enclosed or semi – enclosed type and properly balanced. Enclosed Impellers equipped with seal rings on their hubs.
COUPLING: A suitable coupling arrangement provided with pump set. NON RETURN VALVE: Non Return Valve of the suitable size provided above the pump discharge case. MOTOR:
Motor Rating: As suitable for above parameters Method of starting = Star – Delta Speed = 3000 (Sync).
Frequency = 50 ± 3 % Hz Working Voltage = 380-415 ± 15% V, 03 phase
Efficiency = Not less than 90% Class of insulation = F
Submersible motor should be water filled water lubricated squirrel cage type having capacity for above pumping parameters and working on 3 phases; AC supply ranging from 380 to 415 volts, 50Hz. The motor should be sealed by radial rings to avoid mixing of well water with motor filled water.
a) The job includes providing and fitting of interlocking arrangement against any failure of coupling. It must be fabricated out of MS strips of suitable size and length.
b) The job includes providing and fitting of appropriate size MS nipple 2 feet long threaded on one end and welded to same size MS flange of thickness at other end for column pipe as per site requirement. The threaded portion should be as per size of pumping out let for proper fixing.
The job includes providing and fitting of R. I. cloth joints/rubber washers with nuts, bolts and washers for all joints of column pipe. The job also includes lowering of pumping unit in the well then proper testing and commissioning of pumping unit on full load at site.
Note: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item
Make: Kirloskar/KSB
TO BE CARRIED OUT AT STAGE-1ST
1
65000
65000
... More
Supply, Installation, Testing & Commissioning of Open Well Pumping Units as per IS 14220.
PUMP: - • Type of pump : Open well Submersible Pump (Horizontal)
• Discharge: 8000 GPH
• Head: 40M
• Quality of Water to be handled : Filter water METERIAL OF CONSTRUCTION:
• Pump Casing : Cast Iron
• Impeller : SS • Pump Shaft : Stainless Steel 410
• Motor Body : Cast Iron/SS
• Sealing : mechanical seal The bowl plate shall be provided with name plate giving complete specifications MOTOR: -
Rating:suitable for above specification • Method of starting: Star – Delta/DOL (as specified).
• Frequency : 50Hz + 3%
• Voltage : 415 + 6 %, - 15% 3 phase • Class of insulation: Suitable for above rating.
• Sealing : Dual mech. seal. Provided with thermal and overload protection
The motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the motor shall have a name plate giving complete specifications. Note: Test certificate having the Serial No. of the Pumping Unit along with the performance curve in duplicate from the Manufacturer must be produced on delivery of the item
Make: Kirloskar/KSB
TO BE CARRIED OUT AT STAGE-IInd
1
75000
75000
... More
Providing and fitting of G.I flanged delivery line from the tube well upto the sump and finally sump to the foot of OHT. The job includes fabrication of the coloumn pipes of length not exceeding 10 feets. The Pipe shall be hot dip Galvanized, class C confirming to IS 1239. The job also includes providing and fitting of M.S Flanges conforming to BIS 6392/1997 Table 5 (Rating PN16). The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. The job includes Providing and fitting of 90-120 degree bend/elbows/Tee to be fabricated out of Class C GI pipes flanged on both ends a to make it leak proof as per the site requirement
Flanges (as per IS 6392/1997 Table:5)
Thickness shall conform to IS 6392 Part 1st Table-5. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint.
Welding Electrode:
DC Arc Welding using welding electrode having diameter not less than 4mm.
Nuts and Bolts of required size. Rubber Insertion Gaskets:
Rubber Insertion Gaskets to be used between flanged joints. The main technical specifications of the pipe are given here under:
ND= 80 mm
Class: C (Heavy)
1
1550
1550
... More
Providing and fitting of Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units.
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber (Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket requ. ired for the job.
TO BE CARRIED OUT AT STAGE-IInd. 80 mm PN 1.6 (Make: VAG/Sigmaflow/Talis)
1
15497
15497
... More
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber (Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
TO BE CARRIED OUT AT STAGE-Ist STAGE-IInd. DN 80 PN 1.6 (Make: VAG/Sigmaflow/Talis)
1
17489
17489
... More
Supply , installation , commissioning and creation of pole mounted, outdoor type Electric Sub Station as per the technical specifications given here under -
Specifications conforming to IS: 1180 (Part 1) 2014 with latest amendments.
Type: HT/LT Transformer
Type of cooling: ONAN.
Operating conditions:
Input =11000 volts
Output =433 volts AC supply in 3- phase.
Terminals:
Input=3 No. HT bush rods with insulators, washer, nuts etc.
Output=4 No. LT bush rods switch insulators, washers, nuts etc.
Core: The core shall be of high permeability to reduce core losses and the strips shall be of suitable size and gauge. Transformer Coils: Suitable number of HT and LT coils in each leg of the core. The transformer coils shall be fabricated out of superior quality aluminum wire/strips, properly wound. The HT transformer is completely filled with suitable grade transformer oil up to required level. The job includes carriage, and all leads and lifts involved.
The HT transformer shall be of reputed make from an ISO certified company as per relevant standards and a test certificate shall be provided before installation. The transformer shall also be provided with breather fill with silica gel crystals, conservator with oil level indicator, explosion vet and adequate radiator fins/ Tubes. The impedance of transformer shall be as per IS: 1180 (Part 1) 2014 with latest amendments. NOTE: The scope of the work shall include obtaining of necessary inspection/clearance certificate from the concerned department for all the required equipment. The testing and commissioning shall be completed only after obtaining above certificate. 63 KVA
1
171963
171963
... More
Fabrication, Providing and fitting of Modular motor control panel of appropriate size fabricated out of 14 SWG sheet having required openings/vents and protection Class : IP-55 & fitted with accessories as under:
a) Bus bar Chamber:
The bus bar chamber shall be fitted at the top of the panel horizontally throughout the length. There shall be 3 Nos. of phase bus bar and 1 No neutral bus bar and 1 No earthing bus bar. The bus bars shall be air insulated and made-up of high conductivity COPPER with current density of suitable rating for 100 Ampere. All panel compartments shall be provided with suitable cable alley and vertical bus bar alley. Suitable segregation shall be provided in between bus bar chamber and adjoining compartments. The bus bar shall be PVC sleeved with color strips of red, yellow, blue and black and the same be arranged in accordance with IS-375 specs. Electrical clearances shall be maintained between phases, neutral and body as per standards.
b) Main Circuit Breaker (Incomer MCCB):
Qty. = 01
No. of poles = 4 Pole
Current Rating = DN2-250N, 160-200 A.
Rated operational voltage = 415 V + 15 %
Rated frequency = 50+/-3%Hz
Ambient temperature = 40C˚
Ultimate S.C Breaking Cap.
at (415V AC, 50 Hz) = 50 KA
Type of release = Thermal-Magnetic
Overload protection = 0.8 – 1×ln adjustable
Short-circuit protection = 6-10×ln adjustable.
c) Change over Switch:
Qty. = 01 No.
Rating = 200 A
Type = Front operated, on load, 4 pole, 400 +15%V, 50 + 3%Hz.
-
-
-
... More
d) Motor Back-up Protection MCCB:
Qnty = 03 No
No. of poles = 3P
Current Rating = DN0-125D, 100-125 A
Rated operational voltage = 415 V +15 %
Rated frequency = 50 + 3% Hz
Ambient temperature = 40C˚
Ultimate S.C Breaking Cap. at (415V AC, 50 Hz) = 36 KA
e)Submersible starters = Fully automatic star-delta
Type: MU-G20
Power Specs = 3 Ф, 415 + 15% V, 50 + 3 % Hz.
Relay range = 13-21 A
Coil Voltage = 380 v Protection = single phasing , phase
Reversal, phase unbalance (55 ± 5 V) ,
Qty. = 3 No’s
f) Auxiliary MCCB for Heating/Lighting:
Circuit Breaker = MCCB (Outgoing)
Qty. = 1 No.
No. of poles = 4P
Current Rating = 63 A
Rated operational voltage = 415 V + 15 %
Ultimate S.C Breaking Cap. at (415V AC, 50 Hz) = As per requirement
-
-
-
... More
g) Motor Protection Relay:
MM10 Digital Motor Protection Relay with LCD Display for 3-phase supply with following protections suitable for the Modular Control Panel:-
Protections = Thermal Overload with pre-alarm, Short Circuit, Phase Loss, Unbalance, Phase reversal, Under Current, over current, Prolong starting, Locked Rotor, Under voltage, over voltage & Earth fault.
h)M-power module for mobile starter for submersible motor 1P/3P 3 wire IVRS Languages – English , Hindi, Suitable Region- North India
The panel shall be provided with phase indicators (03 N0) and digital ammeter of range 0-60 A, digital voltmeter of range 0-500 V, and digital frequency meter (01 No for each starter). The enclosure of the panel shall be of excellent fit and finish, corrosion resistant and powder coated gliding hinges for smooth and noiseless movement of windows and advanced locking arrangements.
1
210000
210000
... More
Providing, fitting, testing and commissioning of voltage stabilizer as per specifications below: Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step.
Type of Regulator : Double plate type with electrolytic copper contacts.
Input voltage : 250-400 volts.(3 phase)
Output voltage : 400 ±10% volts.
Frequency : 50 ±3 C/S.
Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried.
Insulation : Fiber glass insulations to tested parameters.
Cooling : Naturally, Oil cooled
Temp. Rise (Max) : 30°C above ambient
Mounting : On Uni-directional wheels.
Correction rate : 30 volts per step
Wave form distortion : virtually nil
Duty cycle : 100% continuous.
Enclosure : MS sheet enclosure in pressed CGR Sheet powder coated with radiators.
Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations.
Load : Three phase induction motor load.
Load Amperes (continuous)
Overload in 24-hours operation: 10% above continuous Ampere rating.
The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).
Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level.
The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications.
(ONE JOB EACH TO BE CARRIED OUT AT STAGE-Ist & STAGE-IInd & ONE TO BE KEPT AS STANDBY) (25 KVA)
1
58000
58000
... More
Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps for the transformer bed and for the tapping point of suitable size or as per the direction of site engineer.
1
123
123
... More
Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, single break provided with locking arrangement at both ON and OFF position consisting of HT post double insulator, copper or copper alloy high pressure heavy contact assembly, rod with bearings , operating handle and 2 length of 32mm dia. GI pipe conforming to IS 1818 1961, 06 No. of insulators, rated voltage 11KV 200A complete as per IS specs.
1
12000
12000
... More
Supply, Installation, Testing and commissioning of 11KV polymer fuses Set Horn Gap 3-phase 200 A suitable for vertical installation
1
4983
4983
... More
Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class, 10KA, 9KV, LA With polymer housing , Station Type .
1
7754
7754
... More
Supply and fitting of 11 KV polymeric composite pin insulator 12 KV, 5KN, Lighting impulse 75KV Positive, and 80 KV Negative, creep distance 320 mm
1
347
347
... More
Supply, installation, erection of 9 mtrs long ST- 410 (sp-33) . The job further includes drilling of holes for installation of various accessories wherever required.
1
20686
20686
... More
P/F of Galvanized nuts and bolts of various sizes as per site requirement.
1
142
142
... More
P/F Danger Plate with clamps
1
150
150
... More
Providing and fixing G.I Barbed wire for anti climbing
1
136
136
... More
Providing and fixing of anti climbing devices with clamps
1
409
409
... More
Providing and fitting of Galvanized stay set with 50 X 8 mm Stay Clamp , Guy insulator (2no.), Anchor plate (200X200X6mm) , nuts and bolts , 2 No- turn buckle , 1.8 m long , 16 mm diameter solid G.I stay rod & 7/3.15 mm dia. G.I stranded wire complete.
1
4922
4922
... More
Painting of poles Red oxide
1
306
306
... More
Painting of poles Aluminum paint
1
510
510
... More
Supply, Installation and Testing of 35 Sq mm XLPE Aluminum H.T cable (ABC type ) of 11 KV grade with following specs.
Size (cross sectional area in sq mm) = 3×35 with reinforced wire
Phases: Red, Yellow, Blue
1
818
818
... More
Providing and fitting of Anchoring clamps comprising of clamp body ,plastic wedge, steel bill bracket , straps and buckles or nuts and bolts required for holding of 3-Core , 35 Sq. mm H.T AB Cable.
1
457
457
... More
P/F of 11 KV cable termination kit for connecting 35 Sq mm XLPE cable (ABC type) with the existing HT line near tapping point and 100 KVA HT transformer.
1
8994
8994
... More
Providing and fitting of GI earthing rod for earthing of HT poles as per REC standard.
1
659
659
... More
Providing and fitting of prodigy LT meter of following specification complete with all fixtures required for fitting at site for above mentioned scheme.
Type: E3L 100, 3-phase, 4-wire
Measurements offered: KWh, KVARh, KVAh, KVA
Voltage: 240 V (415 V) 50Hz, Lb:40 A, Imax= 200A
Battery: Lithium (SECURE)
1
25000
25000
... More
P/I of earthing station for substation, LT panel, DG set and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. The job includes Auguring of bore of required dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards.
Safe earthing electrode size : 80 mm dia , Length 2000 mm
Back fill compound : 30 kg
1
10462
10462
... More
Supply, installation of 6 kg CO2 type fire extinguisher manufactured as per IS: 15683 of 2006 with IS mark and comply with DGMS (Approval). The co2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipment. The cylinder used for fire extinguisher shall be approved by petroleum and explosive safety organization (PESO) as per gas cylinder rules 2004 and as per IS: 7285 of 2004. The body should be made of seamless steel (manganese) confirming to IS: 7285 with IS mark and should be provided with squeeze grip nozzle and should be filled with co2 confirming to IS: 15222 of 2002 with certificate. The extinguisher shall be provided with manufactures test certificate and hydraulic test certificate by BIS from PESO.
1
6447
6447
... More
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of pole Having following specs:
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68.
The LED is properly fitted as per the site conditions and as per the directions of site engineer.(Arms required for fitting of LED is included in the job)
1
9486
9486
... More
Providing, Installation and testing of 2KVA fully automatic voltage stabilizer with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit as per location provided by site incharge.
1
8154
8154
... More
Providing and Fitting of 3.5 core XLPE Armoured Aluminium Cable conforming to IS: 7089 part 1st as service line from the HT transformer to control panel including necessary thimbling, crimping, taping etc.
NOTE:- The cable terminal ends for connection to switchgear at vario us requisite points shall be Al. Thimbles of dowel’s make and of appropriate size and connected by hydraulic crimp tool only. 50 sqmm , 3.5core
1
497
497
... More
Providing and fitting of 3-Core flat submersible copper cable conforming to IS: 694 (Part 1st) – 1964 & IS: 694 (Part 2nd) - 1964 for Submersible Pumping Unit and other electrical Equipments . The cable connections terminal shall be fitted with copper thimbles of required size. 10 sqmm
1
610
610
... More
Providing and installation of Junction Box with DP 32 A MCB to serve as Main switch for LED Lighting. The job includes making of electric connection to the circuit.
1
2227
2227
... More
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover with 2-core 6mm2 Cu wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc of reputed make for proper fitment and installation of the item.
1
34053
34053
... More
Providing of good quality bedding for night stay/Shift consisting of: -
1) Mattress with warm cover size 6'x3' (6Kg)- 02 No’s
2) Quilt with warm cover size 5'x8' (6Kg)- 02 No’s
3) Pillows with covers - 02 No’s
4) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
1
39619
39619
... More
Providing and fitting of 01 No. LED (scroll type) sign board fabricated out of stainless steel and metal showing the names of water supply scheme and the Department. Size: 6’×1’6”
1
250
250
... More
Providing/fitting of manual type chain pulley block having following features:
Make = INDEF/Pulllift Capacity = 2MT
No. Of chain falls = 4
Min. Height of lift = 6 M
Gears:- The hoist shall have precision cut super and helical gears made of alloy steel mounted on bearings and housed in a dust proof gear box. The lubrication of gears be of high viscosity and temperature for longer life of gears. Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation. Load chain wheel:- Specially designed, perfectly machined wheel providing correct grip of load chain made of malleable cast iron makes the hoist most safe and reliable against any failure.
1
28000
28000
... More
O & M
-
-
-
... More
For 1st Year
1
140000
140000
... More
For 2nd Year
1
160000
160000
... More
For 3rd Year
1
180000
180000
... More
For 4th Year
1
200000
200000
... More
For 5th Year
1
269000
269000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements