Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Civil And Construction
Pipe Line Project
Water Storage And Supply
Eprocure
Opening Date17 Aug 2024
Closing DateCancelled
Tender Amount₹ 4,80,53,000
Costs
EMD
₹ 9,61,060Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_258056_1Tender No
e_NIT No. 13 of 08/2024Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:80% AKOS 20% Ordinary rock.
91.04
49377
542.37
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
3560.76
315127
88.5
Cost for fencing gates at different Spots
9
81000
9000
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto All kinds of soil.
340.2
746364
2193.9
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 50 mm dia.
5
25735
5147.15
Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete. With common burnt clay (non modular) bricks of class
designation 7.5
17.33
10428
601.75
GI Bend 15mm dia
1284
71904
56
GI Elbow 15mm dia
856
82176
96
GI Union 15mm dia
1284
74472
58
GI Socket 15mm dia
428
23968
56
Providing and fixing plain PVC bends of required degree 100mm dia
12
4800
400
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures inrecommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
36.25
260711
7192.05
Dumping stone including cost of stones in Horizontal on level
88.58
54600
616.4
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 65 mm dia. nominal bore
170
120989
711.7
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore
120
148194
1234.95
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
32.88
12259
372.85
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
138
87712
635.6
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide
54.85
13290
242.3
Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.
85.3
42893
502.85
Centering and shuttering including strutting, propping etc. and removal of form for foundation
1011.37
265282
262.3
Extra for shuttering in circular works 20%
180
47214
262.3
Centering and shuttering including strutting, propping etc. and removal of form for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.
1761.36
1010756
573.85
Extra for shuttering in circular works 20%
244.27
140174
573.85
Centering and shuttering including strutting, propping etc. and removal of form for Arches, domes, vaults upto 6 m span
171.37
357614
2086.8
Extra for shuttering upto 6 m span
171.37
172818
1008.45
Colour washing such as green blue or buff to give an even shade New work (two or more coats) with a basecoat of white washing with lime.
138
4892
35.45
Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40mm nominal size.
185.43
819572
4419.85
Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 20mm nominal size).
92.8
458747
4943.4
Providing & laying in position cement concrete of specified grade excluding the cost of centring & shuttering all work upto plinth level in 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggr. 20 mm nominal size).
103.19
606494
5877.45
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
262.5
1979880
7542.4
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
59.75
511032
8552.85
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. All works above plinth level upto floor V level Note: - Minimum cement content considered is @ 330 kg/ cum. Any quantity less than 330 kg/cum as per design mix shall be deducted @ Rs 976.70/Qtl (As per SSR 2020). However no extra shall be paid for higher quantity of cement used as per design mix
63.56
537542
8457.25
Providing & Incorporating (during concreting) GP sheet strip water seal 1.25mm (nominal thick) at construction joints including jointing of ends so as to form a continous barrier, strip area (excluding laps) to be measured (width upto 20cm)
1001.08
78084
78
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 1:6 ( 1 cement : 6 coarse sand).
40.8
252297
6183.75
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.
40.8
54004
1323.65
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
30
268618
8953.95
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
16.7
157959
9458.65
Steel Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete upto plinth level TMT bars.Fe 500.
14662
1161963
79.25
Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggr.) finished with a floating coat of neat cement incl. cement slurry and curing complete but excluding cost of nosing of steps etc. complete :50mm with 20mm nominal size stone (Crusher) including curing.
332.47
167897
505
Providing and mixing water proofing material ofapproved make in cement concrete work @ 1 kg per 50 kg of cement.
734
42498
57.9
15mm Cement plaster on the rough side of single or half brick wall of mix 1:4 ( 1 cement : 4 coarse sand) .
1486.06
446486
300.45
Extra for plaster in circular works.
1486.06
51046
34.35
12mm Cement plaster of mix 1:4 ( 1 cement : 4 coarse sand) .
462.8
120351
260.05
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces.
15.4
67035
4352.95
Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm.
573.65
52661
91.8
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded.
1302.4
120927
92.85
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge made of G.I. wire of dia 4 mm.
592.92
434906
733.5
Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 fine sand) including curing.
138
30567
221.5
Cement plaster skirting upto 30cm height with cement mortar 1:3 (1 cement: 3 coarse sand), finished with a floating coat of neat cement and curing complete 18 mm thick.
6.84
3485
509.55
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.
103.48
8288
80.1
Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 110mm bend
20
3577
178.85
Finishing exterior & interior with Colour washing such as green blue or buff to give an even shade new work (two or more coats) with a basecoat of white washing with lime.
462.84
16407
35.45
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows by welding.
394.8
63661
161.25
Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete.
40.12
47257
1177.9
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
36.84
7320
198.7
Providing steel rope crossing including cost of steel rope, U-clamp, iron clamp/hooks, labour charges for stretching the steel rope in position, hire charges of chain pully along with the operator, laying and fitting of GI/HDPE pipes to be tied with the anchor blocks with steel rope 12mm dia,16mm dia, 20mm dia required dia as per condition of site Engineer, including all carriages complete job.
400
324000
810
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately) 50 mm dia.
5
25735
5147.15
Filling available excavated earth ( excluding rock) in trenches, plinth side of foundationetc. In layer not excedding 20cm in depth , lead upto 50mtr and lift upto 1.5mtr
10033.09
1644925
163.95
Dry random rubble masonry with hard stone in foundation and plinth without bond stone.
425
1001278
2355.95
Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 15mm ϕ
18000
364500
20.25
Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 25mm ϕ
2000
61300
30.65
Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 65mm ϕ
980
71589
73.05
Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, Earthwork and refilling etc . G.I Pipe 100mm ϕ
3500
376950
107.7
Laying and fitting of HDPE pipes 32mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
500
8450
16.9
Laying and fitting of HDPE pipes 40mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
11300
268940
23.8
Laying and fitting of HDPE pipes 50 mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
10100
294920
29.2
Laying and fitting of HDPE pipes 63mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
13000
491400
37.8
Laying and fitting of HDPE pipes 75mm dia (all classes) complete including G.I. Union, bend, coupler excluding cost of pipes, earthwork and refilling etc .
6600
270600
41
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 20 mm dia
2
927
463.65
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 25 mm dia
5
2719
543.85
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 32 mm dia
5
3089
617.8
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 40 mm dia
10
7047
704.7
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 50 mm dia
20
18855
942.75
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end) 65 mm dia
20
31373
1568.65
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality as per BIS specifications (screwed end)80mm dia
10
24066
2406.65
Making connection of GI distribution branch with GI main of following sizes by providing and fixing Tee, union etc, including cutting and threading the pipe etc. complete 25 to 40 mm nominol bore
30
19987
666.25
Making interconnection of G I distribution branch with G I Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia.
35
44406
1268.75
Providing & Fixing brass bib cock of approved quality 15 mm nominal bore.
428
136467
318.85
Providing & fixing brass ferrule with C.I . Mouth cover including boring & tapping the main 15 mm nominal bore.
428
132551
309.7
STAGE 0 ELECTRO MECHANICAL MACHINERY ALONG WITH ALLIED WORKS ITEM 83-88 Providfing installation, testing and commissioning of 3000 GPH x 120 meter head submersible pop set (with 1no standby), lowering and fitting of Gl column delivery pipes.length as per site onditions (approximately 100 meters) with the help of chain pulley block and tripod stand & other tools & tackles, together with nipples, adopters, sockets, valves, flanges, bends. m nery alongwith allied works Job includes providing and fitting of MCCB Complete job job)
3
1663800
554600
Design fabrication providing installation testing and commission of 50 Amp. 415 V. 3 phase LTCtrol Panel cum Star delta auto starter complete with protection and safety mechanism.
03 inte the pump room for pumping unit of bore well The complete system should be jober lased in MS steel enclosure box of suitable dimensions Providing and fitting of ino Voneter (0.500V) and 1no Ampere meter 10-100 ampere) The internal wiring should be do with lexible PVC LT Cable with proper thimbling at each end. The system should trip the mot on power failure and on appearance of any electical fault mentioned below which may oth wese damage the motor fields coils Thus prowsing protection to the motor, 1 Low vige below 350V. 2 High voltage above 45DV 3 Single phasing 4 Reverse phasing. Ulanced phasing in addition to the system shall have separate LED fault indicators, LED ple indicators isolation/by pass system/Siren audia warning system which activates on st pailure only over load protection under Load protection, Tet Testing of control Panel after ning incoming and outgoing connection on lead and then on full load. The job also includes Pividing & fitling of 250 Amp main switch 01 no Job also includes proper chemical earthing of equipments. The job includes cost of material, labour, hire charges of tools and tackles. mal/mechanical carriage (Complete job)
3
423000
141000
Providing installation, testing and commissioning of 7500 GPH 300 meter head HC pump set ith suitable rating prime mover in compliance with the technical conditions and aledworks by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions Laying of M-20 gradę RCC foundation block for each pump of size 3x3x4 (or as per pump-motor base frame dimensions) by using reinforcement steel of 10min dia. The foundation block as per size of pump set should have additional margin of 6 on all sides Providing, fabrication and laying of 100mm dia MS suction pipe line to the pumpsetlength as per site conditions condition and upto maximum of approximately 6 meters es including 100mm dia MS bends, MS flanges, expanders/reducers/dismantling joints/ sales pipe extension pieces 100mm dia Cast Iron sluice valve-1no (PN Rating 1.05. gas ets, nuts, bolts, washers as per site requirement Providing, fabrication and laying of 100nm dia MS delivery pipe as per site conditions including MS bends. MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extensión pieces. Cast steel Sluice val 100mm dia and NRV 100mm dia along with bypass arrangement (class 300 ar mpanied with manufacturer's in house test certificate gaskets, nuts, bolts, washers Job anlades greasing work, P/F of graphited gland packing and thereafter testing on no load and ton full load and commissioning thereof. Job includes providing/fitting and laying of chper cable suitable rating from motor to panel in six leads approximately 36 meters for. thpit and laying suitable rating copper cable upto MCCB-bus bar-voltage stabilizer in three le approximately 30 meters in length along with neutral wire conforming to ISI standardswill proper thimbling and insulation material Job Job covers providing and fitting of suitable size MCCB of suitable size breaking strength Proper chemical earthing of the equipment should be done for safety of machinery Job includes cost of machinery, equipments and material, transportation charges, manual carriage chargés, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc
2
2632000
1316000
Making connection of Sump outlet pipe with suction lines hrough 150mm dia MS pipe 01 manifold.. Making connection of delivery lines with rising main through 150mm dia MS pipemanifold Job includes providing and litting of bus bar arrangement complete with frame and insulation work on the wall of the pump room Job includes providing, laying and fixing of ination rubber mats around electro mechanical machinery on the floor of the pump house, Jericludes providing of maintenance tool kit as per enclosed annexure. Job includes cost of ma Tanery, equipments and material, transportation charges, manual carriage charges, labe chajes, loading Aunloading charges, hire charges of tools, tackles, and material handling
1
94000
94000
Design fabrication, camage, instalation, testing and commissioning of 185 ampere Lf control parat pumping station by way of fabrication of auto starter with 3 pole Main and delta power jot Colors of 185A rating 01 no each and star power contactor of 140A rating-Ino con atible with the design rating of the panel and prime mover, of reputed make, conforming 1011 standards. The system should be provided with fault analyzer cum controller unit or equ alent of standard and reputed make The complete system should be enclosed in MS stev enclosure box of suitable dimensions. The enclosure should be finished with powder cond painting from inside as well as from outer surface of approved colour Providing Lay of copper conductors of proper rating along with insulation matenal as per site rement The enclosure should be front shutter mounted with key locking system having swodow Digital electronic voltmeter & ampere meter should be provided along with the re red current transformper and selector switches. The internal control wiring should be doneif it does not fall into star mode first and should remain de-energised to avoid dantage to the motor / machinery and also to the ower source/transformer The system / star della auto starter should trip off if it does not fall to delta & remains in star mode for more than 10-20 seconds. The system shall provide prection against Low voltage below 350 V. High Voltage above 450 V. Single phasing. Rerse phasing. Un Balanced phasing Ory running. Overloading in addition the system shed have the following audio & visual features for a quick and accurate diafor fault analysis of system, wa blisking indicator An audio warning system/Siren which activates only on starter failure trip the motor on appearance of any electrical faull menboned above, to warn the operator to witch off the motor manually 3 LED, contactor COIL OK, indicators, one for each of the en actors/coils LED star & delta indicators to access the star to deita timing A tamper proof sting system to avoid manipulations by the moter qperator to keep the system in a Pananenby ON position Subsequently testing the complete system on, no and full load Job alincludes proper chemical earthing of the equipment
2
488800
244400
Providing, carriage, installation, lesting and commissioning of 3 phase. 250 KVA voltage
stalizer cogger wound, first quality CRGO silicon steel core, naturally- oil cooled, manually oated 14/16 gauge container chamber along with allied works Job includes providing of 2 KVA voltage stabilizer complete with mineral insulating of MCCB, change over switchcolete with safety and protection devices etc Job includes providing and fitting of singlearmoured Al cable of sustable size from electric pole to suitable size main switch in four Iris approximately 50 meters length of each lead and further Providing and fitting of surtablecopper cable from suitable size main switch to voltage stabilizer 20 mtrs in length complete with insulation and thimbling. The vollage stabilizer should have 5upwards steps an 2 downwards steps (or as per the specified voltage range) from the line voltage te it shid work from 180V to 400+5% Proper chemical earthing of the equipment shall be done.Con-olete Job includes cost of machinery, equipments and matenal, transportation charges. ma al carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc
1
893000
893000
STAGE 1 ELECTRO MECHANICAL MACHINERY ALONG WITH ALLIED WORKS ITEM 89-92 Providing carriage installationg. installation, testing and commissioning of 7500 GPH x 300 meter head HC pumpwith suitable rating prime mover in compliance with the technical conditions and alred wks by way of surveying of site, designing of pump machinery and prime mover in cos formity with site conditions Laying of M-20 grade RCC foundation block for each pump of size 5x3 x4 for as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia The foundation block as per size of pump set should have additional märgin of 6 en all sides Providing, fabrication and laying of 100mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters ear including 100mm dia MS bends, MS flanges, expandersireducers / dismantling joints/ sales pipe extension pieces, 100mm dia Cast Iron sluice valve-1no (PN Raling 10). gasts, nuts, bolts, washers as per site requirement Providing, fabrication and laying of 100min dia MS delivery pipe as per site conditions including MS bends. MS flange, expanlers/reducers/dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 100mm dia and NRV 100mm dia along with bypass arrangement (class 300 accompanied with manufacturer's in house test certificate gaskets, nuts, boits, washers Job inch les greasing work. P/F of graphited gland packing and thereafter testing on no load and the on full load and commissioning thereof. Job includes providing fitting and laying of cor er cable suitable rating from motor to panel in six leads approximately 36 meters for, the pyf and laying suitable rating copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length along with neutral wire conforming to ISI standards with proper thimbling earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, fra portation charges, manual carriage charges, labour charges, loading /unloading charges, hire harges of tools, tackles, and material handing equipments etc
2
2632000
1316000
Making connection of Sump outlet pipe with suction lines through 150mm dia MS pipe mar Inld Making connection of delivery lines with rising main through 150mm dia MS pipe amfold. Job includes providing and fitting of bus bar arrangement complete with frame and installation work on the wall of the pump room Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house Job includes providing of maintenance tool kit as per enclosed annexure Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading lunloading charges, hire charges of lools, tackles, and material handling equipment etc
1
94000
94000
Designfabrication, carriage, installation, testing and commissioning of 185 ampere LT control panel at pumping station by way of fabrication of auto starter with 3 pole Main and delta power contactors of 185A rating 01 no each and star power contactor of 140A rating-tno compatible with the design rating of the panel and prinie mover, of repuled make, conforming to standards The system should be provided with fault analyzer cum controller unit or equivalent of standard and reputed make The complele system should be enclosed in MS steel enclosure box of suitable dimensions. The enclosure should be finished with powder coated painting from inside as well as from outer surface of approved colour. Providing / laye of copper conductors of proper rating along with insulation matenal as per site requirement The enclosure should be front shutter mounted with key locking system having glass window Digital electronic voltmeter & ampere meter should be provided along with the required current transformer and selector switches The internal control wining should be done with flexible PVC LT cable with proper thimbling at each end The system should top the motor on power failure and on appearance of an electrical faull mentioned below which may otherwise damage the motor field coils and should not restart automatically unti unless the sysion is reset manually, thus providing Separate LED fault/ status sators LED phase indicators An isolation by pass system, for fault analysis of system, will a blinking indicalor An audio warning system/Siren which activates only on starter failure la the motor on appearance of any electrical fault mentioned above, to earn the operator to switch off the motor manually 3 LED contactor COIL OK indicators, one for each of the contactors/coils LED star & delta indicators to access the star to delta liming A tamper proof starting system to avoid manipulations by the motor operator lo keep the system in a permanently ON position Subsequently testing the complete system on, no and full load Job als includes proper chemical earthing of the equipments The job includes cost of matenal labove, here charges of tools and tackles, manual/mechanical carnage (Complete job)
2
488800
244400
Providing carriage installation testing and commissioning of 3 phase 250 KVA voltage stabaltizer copper wound, first quality CRGO silicon steel core, naturally of cooled, manually op ated, 14/16 gauge container chamber along with allied works Job includes providing of 2 KVA voltage stabilizer oomplete with mineral insulating oil MCCB, change over switchcrplete with safety and protection devices elc Job includes providing and fating of single CT armoured Al cable of suitable size from elecinc pole to suitable size main switch in four le approximately 50 meters length of each lead and further Providing and fitting of suitable 54 copper cable from suitable size man switch to voltage stabilizer 20 mtrs in length con, lete with insulation and thimbling The voltage stabilizer should have 5 upwards steps and 2 downwards steps for as per the specified voltage range) from the line voltage sed should work from 180V to 400-5% Proper chemical earthing of the equipment shall be done Comulele Job includes cost of machinery, equipments and material transportation charges. manual carriage charges, labour charges, loading funloading charges hire charges of tools and tackles etc
1
893000
893000
STAGE 2 ELECTRO MECHANICAL MACHINERY ALONG WITH ALLIED WORKS ITEM 93-96 Providing installation, testing and commissioning of 7500 GPH x 300 meter head HC pump sel with suitable rating prime mover in compliance with the technical conditions and allied jobworks by way of surveying of site designing of pump machinery and prime mover an conformity with site conditions Laying of M-20 grade RCC foundation block for each pump of size 6x3 x4 (or as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia The loundation block as per size of pump set should have addilional margin of 6 on a'l sides Providing, fabrication and laying of 100mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each including 100mm dia MS bends. MS flanges expanders/reducers/dismantling joints/ saddles/ pipe extension pieces, 100mm dia Cast Iron sluice valve-ino (PN Rating 10). gaskets nuts bolts, washers as per site requirement Providing, fabrication and laying of 100min dia MS delivery pipe as per site conditions including MS bends. MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice 100mm dia and NRV 100mm dia along with bypass arrangement (class 300 a ompared with manufacturer's in house test certificate)gaskets, nuts, bolls, washers Job in ludes preasing work. P/F of graphsted gland packing and thereafter testing on no load and thon fuit load and commissioning thereof Job includes providing/fitting and laying of coi er cable suitable rating from motor to panel in six leads approximately 36 meters for hp/f and laying suitable rating copper cable upto MCCB-bus bar-voltage stabilizer in three le is approximately 30 meters in length along with neutral wire conforming to ISI standards we proper thimbling and insulation material. Job covers providing and fitting of suitable size MC: 6 of suitable size breaking strength, Proper chemical earthing of the equipment shouldone for safety of machinery Job includes cost of machinery, equipments and material sportation charges, manual carriage charges, labour chargesoadingfunloading charges hire charges of tools and tackles etc of tools, tackles, and material handing equipments etc
2
2632000
1316000
Making connection of Sump outlet pipe with suction lines through 150mm dia MS pipe mar Inld Making connection of delivery lines with rising main through 150mm dia MS pipe amfold. Job includes providing and fitting of bus bar arrangement complete with frame and installation work on the wall of the pump room Job includes providing, laying and fixing of insulation rubber mats around electro mechanical machinery on the floor of the pump house Job includes providing of maintenance tool kit as per enclosed annexure Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading lunloading charges, hire charges of lools, tackles, and material handling equipment etc
1
94000
94000
Design, fabrication, carriage installation, lesting and commissioning of 185 ampere LT control panel at pumping station by way of fabrication of auto starter with 3 pole Main and delta power contactors of 185A rating 01 no each and star power contactor of 140A rating-1no, compatible with the design rating of the panel and prime mover, of reputed make, conforming to standards The system should be provided with fault analyzer cum controller unit or equ ralent of standard and reputed make The complete system should be enclosed in MS steel enclosure box of suitable dimensions The enclosure should be finished with powder coated paintiThe system/star delta auto starter should tip off if it does not fall into della & remains in star mode for more than 10-20 seconds The system shall provide protection, against Low voltage below 350 V. High Voltage above 450 V. Single phasing. Reverse Mhasing Un Balanced phasing. Dry running. Overloading in addition the system shout have the following audio & visual features for a quick and accurate diagnosis of the appeared fault/ status for a speedy rectification of the system Separate LED fault/status Indicators, LED phase indicators An isolation by pass system, for fault analysis of system, with a blinking indicator An audio warning system/Siren which activates only on starter failure to trip the motor on appearance of any electrical fault mentioned above, to wam the operator to switch off the motor manually 3 LED contactor 'COIL OK, indicators one for each of the contators/cols LED star & delta indicators to access the star to della timing A tamper proof staring system to avoid manipulations by the motor operator to keep the system in a pes anently ON position. Subsequently testing the complete system on, no and full load Job ats includes proper chemical earthing of the equipments The job includes cost of material, 14 15 tab hire charges of tools and tackles, manual/mechanical carnage (Complete job)
2
488000
244000
Providing, carriaage, installation testing and commissioning of 3 phase 250 KVA voltage stizer copper wound, first quality CRGO silicon steel core, naturally oil cooled, manually o ated. 14/16 gauge container chamber along with allied works Job includes providing of 250 KVA voltage stabilizer complete with mineral insulating oil, MCCB change over switch complete with safety and protection devices elc Job includes providing and litting of single core armoured Al cable of satable size from electric pole to suitable size main switch in four lead approximately 50 meters length of each lead and further Providing and fitting of suitable size copper cable from suitable size main switch to voltage stabilizer 20 mtrs in length con lete with insulation and thumbing The voltage stabilizer should have 5 upwards stepsand downwards steps for as per the specified voltage range) from the line vollage te it she id work from 180V to 400-5% Proper chemical earthing of the equipment shall be doneCr plete Job includes cost of machinery, equipments and material, transportation charges, ma al camage charges, labour charges, loading funloading charges, hire charges of toolsand tackles elc
1
893000
893000
STAGE 3 ELECTRO MECHANICAL MACHINERY ALONG WITH ALLIED WORKS ITEM 97-100 Providing g installation testing and commissioning of 3000 GPH x 300 meter head HC pump set th suitable rating prime mover in compliance with the technical conditions and allied job Awer by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions Laying of M-20 grade RCC foundation block for each pump of size 6x3x4 (or as per pump-motor base frame dimensions) by using reinforcement steel of 10mm dia The foundation block as per size of pump set should have additional margin of 6 on all sides. Froviding fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions condition and upto maximum of approximately 6 meters each induding 80mm dia MS bends, MS flanges, expanders/reducers/dismantling joints/ saddles pipe extension pieces, 80mm dia Cast Iron sluice valve-1no. (PN Rating 10). gaskis, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 65 a dia MS delivery pipe as per site conditions including MS bends, MS flange, enders/reducers/dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice 65mm dia and NRV 65mm dia alongwith by pass arrangement (class 300 accompanied manufacturer's in house test certificate)gaskets, nuts, bolts, washers. Job includes sing work PIF of graphited gland packing and thereafter testing on no load andud and commissioning thereof. Job includes providing/fitting and laying of copper cable eabile size from motor to panel in six leads approximately 36 meters for, then pif and laying table size copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately 30 meters in length alongwith neutral wire conforming to ISI standards with proper thimbling and insulation material Job covers providing and fitting of suitable size MCCB of suitable size eting strength. Proper chemical earthing of the equipment should be done for safety of mainery Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools. tackles, and material handing equipments etc
2
1504000
752000
Making and commissioning thereof. Job includes providing/fitting and laying of copper cable e size from motor to panel in six leads approximately 36 meters for, then pif and laying table size copper cable upto MCCB-bus bar-voltage stabilizer in three leads approximately melers in length alongwith neutral wire conforming to ISI standards with proper thimbing and insulation material Job covers providing and fitting of suitable size MCCB of suitable size perting strength. Proper chemical earthing of the equipment should be done for safely of mawnery Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tool, tackles, and material handing equipments etc
1
94000
94000
Design, fabrication carriage installation testing and commissioning of 110 ampere LT control contactors of 110A rating 01 no each and star power contactor of 70A rating 1no compatible with the design rating of the panel and prime mover, of reputed make, conforming to ISI standards The system should be provided with fault analyzer cum controller unit or equivalent of candard and reputed make The complete system should be enclosed in MS steel en sure box of suitabile dimensions. The enclosure should be finished with powder coated paining from inside as well as from outer surface of approved colour Providing/laying of copper conductors of proper rating along with insulation material as per site requirement. The enclosure should be front shutter mounted with key locking system having glass window Digital electonic voltmeter & ampere meter should be provided along with the required current transformer and selector switches The internal control wiring should be done with lexible PVC LT cable with proper thimbling at each end The system should trip the motor on power failure and on appearance of an electrical fault mentioned below which may otherwise dan ige the motor field coils and should not restart automatically until unless the system is res manually, thus providing automation to the system and protection to the motor The system/star delta auto starter should not fall info delta if it does not fall into star mode first and should transformer The system/star delta auto starter should trip off if it does not fall int delta & remains in star mode for more than 10-20 seconds The system shall provide pro ction against-Low voltage below 350 V. High Voltage above 450 V. Single phasing. Res rse phasing. to etch off the motor manually 3 LED, contactor 'COIL OK', indicators, one for each of the co actors/coils LED star & della indicators to access the star to delta timing A tamper proof sting system to avoid manipulations by the motor dperator to keep the system in aals includes proper chemical earthing of the equipments The job includes cost of material,labove, here charges of tools and tackles, manual/mechanical carnage (Complete job
2
357200
178600
Providing, carriage, installation, testing and commissioning of 3 phase. 100 KVA voltagestabilizer copper wound, first quality CRGO silicon steel core, naturally oil cooled, manually ope sted. 14 gauge container chamber along with allied works Job includes providing of 100 KV voltagestabilizer complete with mineral insulating oil. MCCB, change over switch com lets with safety and protection devices etc. Job includes providing and fitting of single corrarmoured Al cable of suitable size from electric pole to suitable size main switch in four lead approximately 50 meters length of each lead and further Providing and fitting of suitable size copper cable from main switch to voltage stabilizer 20 mtrs in length complete with insutation and thimbling The voltage stabilizer should have 5 upwards steps and down wards steps (or as per the specified voltage range) from the line voltage ie. it should work from 180V to 400+5% Proper chemical earthing of the equipment shall be done. Complete Job includes cost of machinery, equipments and material, transportation charges. manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc
1
507600
507600
Carriage of G.I pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 230 Km.
61.31
117947
1923.79
Carriage of G.I pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 02 Km.
61.31
54939
896.1
Carriage of HDPE pipes by Mechanical Transport including loading unloading & stacking from Procurment Jammu to road side of work average distance 230 Km.
42.04
155107
3689.53
Carriage of HDPE pipes by Manual Means incliding loading unloading & stacking from road side (to be identified by Engineer in charge) to site of work average distance 05 Km.
42.04
716451
17042.15
Carriage of Cement & steel by Mechanical Transport including loading unoading & stacking from nearest market place (To be identified by engineer in charge) to road side of work at an average distance of 35 km.
291.05
124042
426.19
Carriage of Cement by Manual means including loading unoading & stacking from road side (To be identified by engineer in charge) to site of work at an average distance of 1.5 km.
266.4
147985
555.5
Carriage of Steel by Manual means including loading unoading & stacking from road side (To be identified by engineer in charge) to site of work at an average distance of 1.5 km
20.38
24319
1193.32
Carriage of Sand & stone aggrigate upto 40mm nominal size (crushed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an average distance of 50 km.
1229.94
749058
609.02
Carriage of Sand & stone aggrigate upto 40mm nominal size (crushed) by Manual means including loading unoading & stacking from roadside (To be identified by engineer in charge) to site of work at an average distance of 1.5 km.
1229.94
1641883
1334.93
Carriage of stone aggrigate above 40mm nominal size (crushed) by Mechanical Transport including loading unoading & stacking from source (To be identified by engineer in charge) to road side of work at an average distance of 15 km.
74.14
23936
322.86
Carriage of Stone aggrigate above 40mm nominal size (crushed) by Manual means including loading unoading & stacking from roadside (To be identified by engineer in charge) to site of work at an average distance of 01 km.
74.14
75145
1013.56
Carriage of brick by Mechanical Transport including loading unoading & stacking from Samba (To be identified by engineer in charge) to road side of work at an average distance of 220 km and 1 KM by Head Load.
19.38
140116
7229.94
Carriage of stone by Manual means including loading unloading & stacking from source (to be identified by Engineer in charge) to site of work at an average distance of 02 Km.
361.25
736220
2037.98
Provision for electrification
1
25000
25000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements