Public Health Engineering Department Tender

Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil

Providing ,supplying ,lowering,laying,jointing ,hydraulic testing and commissioning of PE -100,PN-10 HDPE Pipes in standard lenghts conforming to IS:4984/1415/12786/13488-1 with necessary joining material and all kinds of pipe specials including transportation,Freight charges,inspection charges loading unloading charges,conveying to departmental store,joining procedure as per relevent IS Code complete with materials for jointing procedure with all labours as directed by Engineer In Charge as per IS 7634-Part -2 Hydraulic testing to specified pressures(including cost of all materials labour and water/for specified lenghts inclusive of all kinds of taxes and carriage complete

110 mm dia HDPE pipe

90 mm dia HDPE pipe

63mm dia HDPE pipe

50 mm dia HDPE pipe

40 mm dia HDPE pipe

25 mm dia HDPE pipe

20 mm dia HDPE pipe

Providing and fixing of different Pipe Specials of standard make as directed by Engineer-in-Charge i/c all carriages complete job (The rates of pipe specials will be paid as per below 100 mm G.I Bend @ Rs. 1500/NO, 100 mm G.I Equal tee @ 1200/NO,100 mm G.I Union @ 700/NO,100-80 mm G.I reducer socket @ 300/NO,100-65mm G.I reducer socket @ 300/NO,100x 100x80 mm G.I l tee @ 700/NO,100x100x65 mm G.I l tee @ 600/NO,100x100x50 mm G.I tee @ 550/NO,100 x 100 x 40 mm Tee @540/NO,100 x 100 x 25 mm Tee @520/NO,100 x 100 x 20 mm Tee @520/NO,100 mm G.I Elbow @400 /NO,80 mm G.I Union @619/NO,80-65 Reducer Socket @300/NO,80-50 mm Reducer Socket @250/NO,80 mm G.I Elbow @430/NO,80 x 80 x 50 mm Tee @ 300/NO,80 x 80 x 40 mm Tee @ 250/NO,80 x 80 x 25 mm Tee @ 250/NO,80 x 80 x 20 mm Tee @ 250/NO,65 mm G.I Union @ 475/NO,65 x 65 x 20 mm Tee @ 230/NO,65 x 65 x 25 mm Tee @ 230/NO,65 x 65 x 40mm Tee @ 240/NO,65-50 Reducer Socket @ 200/NO ,65 mm G.I Union @ 253/NO,50 mm G.I Elbow @ 200/NO,50 x 50 x 20 mm Tee@ 230/NO,50 x 50x25mm Tee@ 235/NO,50 x 50x40 mm Tee@ 240/NO,50 mm Equal Tee @ 250/NO,50-40 Reducer Socket@ 150/NO,40 mm G.I Union @ 180/NO,40 mm G.I Elbow @ 130/NO,40 x 40 x 20 mm Tee @ 200/NO,40 x 40 x 25 mm Tee @ 200/NO,40-25 Reducer Socket@ 150/NO,40-20 Reducer Socket@ 150/NO,25 mm G.I Union @ 120/NO,25 x 25 x 20 mm Tee @ 130/NO,25 mm Equal Tee @ 110/NO,20 mm Equal Tee @ 100/NO,20 x 20 x 15 mm Tee @ 80/NO,15mm push cock @ 60/ NO,20mm G.I Elbow @ 60/ NO,25mm G.I Elbow @ 60/ NO,20 mm G.I Nipple @ 40/NO, 25mm nipple @ 50/NO.

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe)

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket.

250 mm dia pipes

150 mm dia pipes

Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement) Up to 300 mm dia.@ Rs 7823.70 per Qtl and Over 300 mm dia @ Rs 8225.10 per Qtl,

Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments

250 mm dia. Class 1

150 mm dia. Class 1

Providing & laying of stone soling hand packed in trenches.(Nallah) including carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete.

walls (any thickness) including attacxhed pillasters, butresses, plint and string course

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls Under 20 cm wide

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing of flanged joints to 250 mm dia DI/GI pipes including cost of welding flangres rubber seal nuts bolts testing of joints complete job

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Carriage of material from source upto site of work by mechanical means incl. loading, unloading and stacking complete.

250 mm dia DI

150 mm dia DI

cement and steel for an average lead of 20 km

sand for an average lead of 40 km

20 mm aggregate for an average lead of 20 km

40 mm aggregate for an average lead of 20 km

Erxtra carraige iof material from dumping site to actual work by manual labour for an average lead of 100 mtrs

250 mm dia DI 200 Mtrs average lead

150 mm dia DI 200 Mtrs average lead

cement

steel

sand & 20 mm aggregate

40 mm aggregate