Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Water Storage And Supply
Eprocure
Opening Date28 Nov 2024
Closing Date12 Dec 2024
Tender Amount₹ 67,34,00,000
Costs
EMD
₹ 1,34,68,000Document Cost
Refer DocumentsTender Fee
₹ 20,000
Summary
Water Supply Scheme (coverage Part) Sopore Town Under Amrut 2.0
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_266278_1Tender No
Fresh ENIT No. 21/PHE/Spr of 11/2024 dt 28-11-2024Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Beyond 30 cm girth upto and including 60 cm girth.
1
379
379.05
Beyond 60 cm girth upto and including 120 cm girth.
1
1683
1683
Beyond 120 cm girth upto and including 240 cm girth.
1
7795
7795.7
Above 240 cm girth
1
15627
15627.5
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil)
1
187
187.3
Ordinary rock
1
392
392.8
Hard Rock (Requiring Blasting )
1
687
687.1
Hard Rock (Blasting prohibited )
1
1128
1128.75
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil :
-
-
-
All kinds of soil :
1
89
89.75
Ordinary rock
1
161
161
Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
-
-
-
All kinds of soil :
1
592
592.9
Ordinary rock
1
940
940.3
Hard Rock (Requiring Blasting )
1
1312
1312.4
Hard Rock (Blasting prohibited )
1
2218
2218.1
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge
-
-
-
All kinds of soil :
1
479
479.3
Ordinary rock
1
924
924.8
Hard Rock (Requiring Blasting )
1
1316
1316.2
Hard Rock (Blasting prohibited )
1
2173
2173
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
-
-
-
All kinds of soil :
1
256
256.85
Ordinary Rock
1
493
493.5
Hard Rock (Requiring Blasting )
1
810
810.85
Hard Rock (Blasting prohibited )
1
1196
1196.05
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
-
-
-
For all kinds of soil (40% of above qty)
1
436
436
Along WBM (30% of above qty)
1
710
710.3
Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified grade concrete mix, diameter and length below the pile cap,to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embeded in the pile cap etc. all complete including removal of excavated earth with all lifts and leads(Length of pile for payment Shall be measured from top of shoe to the bottom of pile cap) 21.2.1 By percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete.
-
-
-
450 mm dia piles
-
-
-
M-25
1
1941
1941.9
M-30
1
1957
1957.55
M-35
1
1973
1973.3
500 mm dia piles
-
-
-
M-25
1
2275
2275.5
M-30
1
2294
2294.8
M-35
1
2314
2314.25
600 mm dia piles
-
-
-
M-25
1
3095
3095.25
M-30
1
3123
3123.1
M-35
1
3151
3151.1
750 mm dia piles
-
-
-
M-25
1
4693
4693.95
M-30
1
4737
4737.4
M-35
1
4781
4781.1
Vertical load testing of piles in accordance with IS 2911 (PartIV) including installation of loading platform by Kentledge/Anchor pile method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer-in-Charge. 21.6.1 Single pile upto 50 tonne safe capacity
-
-
-
Initial test (Test Load 2.5 times the safe capacity)
1
159533
159533
Routine test (Test Load 1.5 times the safe capacity)
1
175486
175486.6
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (Chipping of Pile Heads)
1
2516
2516.85
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
1
63
63
Extra for plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof.
1
71
71.55
Extra for plastering
-
-
-
Spherical Ceiling
1
141
141
Groined ceiling
1
153
153
Flewing Soffits
1
93
93
Providing & fixing ventilator of size 450mm x 450mm made out of angle iron 40mm x 40mm with wire mesh of 25mm x 25mm size including welding charges & inlcuding all carriages upto site of work.
1
1500
1500
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.
-
-
-
Serrated with central bulb (225 mm wide, 8-11mm thick)
1
283
283.25
Dumb bell with central bulb (180mm wide, 8mm thick)
1
229
229.75
Kickers (320mm wide, 5mm thick)
1
229
229.75
Providing & fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge
1
800
800
Supply, installation, testing and commissioning of Advanced Maintenance Free environment friendly Earthing system consisting of 1 no. of 3mtr length, 17.2 mm dia UL certified earth electrode made of high tensile low carbon steel circular rods, molecularly bonded copper on outer surface (minimum copper bonding thickness-250 microns) with GI terminals to connect incoming strips, (Environment friendly backfill compound duly certified as per ANSI/NSF standard 60/Toxic content certificate as safe for use near potable ground water resources strictly as per specification enclosed. Make- SHREE ELECTRODES/OBO BETTERMANN/ERICO(2 Nos UPS and 4 Nos Main L.T Panel/2 Nos Fire Fighting Panel)
1
15800
15800
Earth pit chamber (300mm x 300mm) with CI cover for the above.
-
-
-
Providing and Fixing 25 mm x 5 mm Copper Strip in 40 mm dia. G.I Pipe FRL Earth Electrode including connection with Brass nut ,bolt, spring, washer, excavation and refilling etc. as required.
1
1224
1224
Supply, installation, testing and commissioning of lightening conductor made of 25 mm dia 300 mm long copper tube having single prong at top with base plate.
1
1500
1500
Supply, Fabrication, Fixing in position Mild Steel Edge Cutter with mild steel anchorage including welding and making position for fixing of reinforcement of wall as per approved drawings and technical specifications and as per instructions of Site Engineer Incharge incld. all carriages and cost complete.
1
225
225
Sinking of well through all types of sink complete as per drawings and all technical specification having inner dia of 6.00m by way of making of platform overhead wall, with loading, unloading of sand filled EC bags for required number of castings and engagement of skilled with sinking depth as per site conditions and removal of platform as per directions of site Engineer Incharge incld. all carriages.
1
35000
35000
Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth exceeding 3 m but not exceeding 4.50 m
1
301
301.65
Providing and filling of E.C Bags with sand/earth including cost of E.C Bags, earth, Sand all carriages, cost etc and including laying in position to acts as copper dam/spur/diversion, as per site requirements and directions of site Engineer.
1
30
30
Dismantling Earthwork In Excavation of Ring Bund/Spur Bund/Push bund
1
592
592.9
Providing and incorporating during concreting G.P strip water seal 0.63mm nominal thick at construction joint as per proper specification and instruction of Engineer incharge complete job .
1
650
650
Manufacturig of M.S manifold out of 5mm thick M.S 200mm pipe of 1.55 Mtr long both ends blinded/flanged including fixing of required dia nipples with flanges and making required dia holes for nipples/supply lines including all sorts of carriage as directed by site Engineer incharge
1
15000
15000
Providing and fixing of M.S lid of size 0.75x0.75 made out of angle iron 50x6 with all locking arrangement complete as directed by site Engineer incharge
1
8000
8000
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
5733
5733.6
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)
1
283
283.8
12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)
1
266
266.2
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
1
167
167.8
Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).
-
-
-
Depth exceeding 1.5 m but not exceeding 3 m
1
255
255.2
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1
218
218.4
Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
1
65
65.9
Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
1
276
276.6
Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing, ramming, all leads lifts and all carriages complete.
1
1320
1320
Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job
1
7700
7700
Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job
1
7968
7968
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
1
2412
2412
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
1
1204
1204.5
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
1
6540
6540.45
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
1
5673
5673.4
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9821
9821.85
Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9023
9023.35
Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
1
10377
10377.15
Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centering, shuttering, finishing and reinforcement with:
-
-
-
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9588
9588.05
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
-
-
-
All works upto plinth level
1
8021
8021.1
All works above plinth level upto floor V level
1
9412
9412.05
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.
5.35.1 Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
1
98
98.8
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
1
280
280.95
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
1
941
941
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
1
286
286.35
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1
628
628.95
Suspended floors, roofs, landings, balconies and access platforms.
1
718
718.2
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
1
577
577.55
Columns, pillars, piers, abutments, posts and struts.
1
742
742.55
Stairs (excluding landings) except spiral staircases.
1
851
851.15
Spiral staircases (including landings)
1
676
676.25
Arches, domes, vaults upto 6 m span
1
2281
2281.2
Extra for arches, domes, vaults exceeding 6 m span
1
1118
1118.85
Chimney and shafts
1
628
628.95
Extra for shuttering in circular work (20% of respective centering and Shuttering items)
1
-
0.2
Edges of slabs and breaks in floors and walls
1
262
262.2
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).
-
-
-
Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
1
293
293.9
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
1
63
63
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all
complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :
-
-
-
Cement mortar 1:4 ( 1 cement : 4 coarse sand)
1
7877
7877.4
Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
1
1455
1455.65
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
-
-
-
First class kail wood
1
108897
108897.35
Second class kail wood
1
101081
101081.9
K.D wood
1
80000
80000
Pre-laminated particle board with decorative lamination on both sides,Grade I, Type II IS : 12823 marked
1
1764
1764.6
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
-
-
-
First class kail wood (30 mm thick shutter)
1
2892
2892.1
Second kail wood (30 mm thick shutter)
1
2597
2597.15
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.
-
-
-
With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
-
-
-
With 2nd class teak wood beading 62x19 mm
1
1308
1308.35
4 mm thick glass pane (weighing not less than 10 kg/sqm)
1
1985
1985.85
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading
1
1540
1540.3
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angles 40x40x6mm for diagonal braces.
1
5493
5493.9
Using flats 30x6mm for diagonal braces and central cross piece.
1
5338
5338.5
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. chequered plate wherever required, all complete.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required.
1
141
141.4
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1
181
181.6
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
M.S. tube
1
161
161.05
E.R.W. tubes
1
154
154.7
G.I. pipes
1
197
197.45
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1
120
120.8
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
-
-
-
Riveted and bolted
1
142
142.9
Welded
1
138
138.2
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters
-
-
-
80x1.25 mm M.S. laths with 1.25 mm thick top cover
1
3305
3305
Providing and fixing ball bearing for rolling shutters.
1
531
531.55
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
-
-
-
40mm thick with 20 mm nominal size stone aggregate.
1
510
510.25
50 mm thick with 20mm nominal size stone aggregate.
1
562
562.15
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete
-
-
-
In colour such as White, Ivory, Grey, Fume, Red Brown (as dirrected by the engineer incharge)
1
1107
1107.65
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with:
-
-
-
Makrana White Second quality (16mm)
1
3316
3316.05
Extra for pre finished nosing to treads of steps of marble stone
1
553
553.7
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter.
1
644
644.25
12mm Cement plaster finished with a floating coat of neat cement of mix:
-
-
-
1 : 3 ( 1 cement : 3 fine sand)
1
370
370.75
1 : 4 ( 1 cement : 4 fine sand)
1
353
353.1
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
1
241
241.25
CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 15mm Cement plaster on the rough side of single or half brick wall of mix:
-
-
-
1 : 4 ( 1 cement : 4 fine sand)
1
327
327.85
1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
Pointing on brick work in 1 cement : 3 sand mix. flush/ruled/structure or weathered pointing
1
200
200.8
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1
98
98.75
Applying priming coat:
-
-
-
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood
1
61
61.4
With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
1
53
53.6
With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat)
1
28
28.85
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
-
-
-
Two or more coats on new work
1
131
131.85
Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
1
194
194.65
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
-
-
-
On steel work
1
197
197.8
On concrete work
1
199
199.1
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
1
127
127.95
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.
1
164
164.6
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc.complete
-
-
-
125 mm
1
68
68
100 mm
1
60
60
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
150x10 mm
1
83
83.8
100x10 mm
1
63
63.35
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. Complete. First class Budloo/Fir wood
1
126976
126976.45
Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. Complete. Popular wood
1
35000
35000
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
0.50 mm thick with zinc coating not less than 275 gram/m2
1
852
852.5
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete
-
-
-
0.80 mm thick with zinc coating not less than 275 gram/m2
1
840
840.15
0.63 mm thick with zinc coating not less than 275 gram/m2
1
761
761.95
0.50 mm thick with zinc coating not less than 275 gram/m2
1
690
690.85
Providing and fixing plained eaves boarding. 2nd class kail wood
-
-
-
250x32 mm (nominal size )
1
999
999.05
300x40 mm (nominal size)
1
1453
1453.5
Providing and fixing of 0.5mm Color GS Sheet Soffit boarding including Backing, supports etc complete job
1
600
600
Providing and fixing plained eaves boarding. (II Class kail Wood)
-
-
-
250x32 mm (nominal size )
1
702
702.55
300x40 mm (nominal size)
1
1007
1007.5
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
1 mm thick
1
138
138.1
2 mm thick
1
181
181.05
Providing, Laying and Fitting HDPE pipe conforming to IS 4984: 1995 with latest amendments and conveying to work site including loading and unloading at both destinations and rolling, lowering into the trenches, laying true to line and jointing of pipes and specials by electro fusion welding as per standard procedure and guidlines, including encasing the pipe around to a depth not less than 15 cms with soft earth or selected earth available from the excavation etc., complete giving hyduralic test as per relevant ISI with all leads and lifts including testing commissioning. the rate is inclusive of required specials and fittings etc (Couplers, Tee, Reducer, Bend, End Caps conforming with BS EN12201: Part-3)wherever required complete (Contractor will make own arrangements for procuring water for testing) HDPE pipe PE100, PN16
-
-
-
140mmø
1
875
875
110mmø
1
586
586.15
90mm ø
1
403
403.9
75mm ø
1
291
291
63mm ø
1
217
217.8
50mm ø
1
139
139.2
40mm ø
1
91
91.9
25mm ø
1
44
44.1
20mm ø
1
44
44.1
Manufacturing, supply and delivery of DI D/F Resilient Seated Sluice Valve of pipe with body and bonnet of Ductile cast iron of grade GGG-40, wedge with fully encapsulated EPDM rubber W-270 (approved for drinking water)/WRAS and seals of NBR/EPDM. The valves should be with replaceable stem nut and replaceable sliding shoes. Valve stems shall be of single piece thread rolled. Valve shall have 3 O rings of NBR/EPDM for Stem sealing. Gate valve shall be compatible for burried applications without valve chamber with necessary precautions. Face-to-face dimensions as per EN 558 and operating torque flange connections as per EN1092-2, Maximum Valve should be at least 40% less than the torque as stated in the standard EN 1074. Electrostatic epoxy powder/liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy Powder should be approved by W 270/WRAS. (EP-Pà it is a resi-coat powder approved for drinking water application, applied through fusion bonding technology process by dipping the shot-blasted casted components heated up to 200 deg
-
-
-
140 mm ø
1
18000
18000
110 mm ø
1
15000
15000
90 mm ø
1
12000
12000
Providing, supply & fitting of Gun Metal Gate Valves Class 1 & 2 conforming to IS 778/1986 with all necessary fittings required for the installation of Gate Valves in HDPE pipes complete job
-
-
-
63mm ø
1
4100
4100
50mm ø
1
3700
3700
40mm ø
1
3200
3200
25mm ø
1
1800
1800
Providing and making MDPE Pre insulated MDPE PIPE consumer service connection on HDPE/Gl pipe with the help of electro fusion machine or compression fitting G.I/HDPE specials like electrofusion Tee, double compression elbow , female threaded adopter with metal 200.00 insert, Service saddle, reducer etc complete. The rate include labour, required for fitting, complete job. 20mm dia. Pre Insulated HDPE consumer connections by Compression fitting from HDPE pipe (50mm to 25mm) dia.
1
2100
2100
P/S and Installation of 15 mm CP brass tProviding, Supplying & Installation of 15 mm C.P. brass tap with all specials & fittings required for connecting tap to MDPE pipe with all leads and lifts and as directed by the Engineer in charge of the work complete jobap with all specials and fittings required for connecting tap to MDPE pipe with all leads and lifts
1
310
310
Cutting road and making good the same including supply of extra quantities of material i.e. crushed aggregate, moorum screening, red bajri and labour required.
-
-
-
Bituminous portion
1
4000
4000.4
Water bound macadam.
1
2236
2236.2
Providing and fixing G.I. Pipes (Light) complete with G.I. fittings excluding trenching and refilling etc. (external work)
-
-
-
15 mm dia. nominal bore
1
179
179.2
20 mm dia. nominal bore
1
227
227.9
25 mm dia. nominal bore
1
311
311.95
32 mm dia. nominal bore
1
384
384
40 mm dia. nominal bore
1
434
434.65
50 mm dia. nominal bore
1
532
532.8
65 mm dia. nominal bore
1
745
745.1
80 mm dia. nominal bore
1
878
878.25
100 mm dia. nominal bore
1
1255
1255.15
125 mm dia. nominal bore
1
1300
1300
150 mm dia. nominal bore
1
1400
1400
Providing and fixing G.I. pipes (Medium) complete with G.I. fittings excluding trenching and refilling etc. (external work)
-
-
-
15 mm dia. nominal bore
1
206
206.5
20 mm dia. nominal bore
1
255
255.2
25 mm dia. nominal bore
1
339
339.25
32 mm dia. nominal bore
1
411
411.3
40 mm dia. nominal bore
1
489
489.25
50 mm dia. nominal bore
1
805
805.7
65 mm dia. nominal bore
1
1018
1018.05
80 mm dia. nominal bore
1
1151
1151.2
100 mm dia. nominal bore
1
1434
1434
125 mm dia. nominal bore
1
1995
1995.45
150 mm dia. nominal bore
1
2256
2256.9
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
80 mm dia.
1
14058
14058
100 mm dia.
1
17210
17210
125 mm dia.
1
21000
21000
150 mm dia.
1
26720
26720
200 mm dia.
1
42300
42300
250 mm dia.
1
66440
66440
300 mm dia.
1
83100
83100
350 mm dia.
1
181060
181060
Providing and laying S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes conforming to IS : 8329
-
-
-
100 mm dia Ductile Iron Class K - 7 Pipes
1
1379
1379.55
150 mm dia Ductile Iron Class K - 7 Pipes
1
1934
1934.7
200 mm dia Ductile Iron Class K - 7 Pipes
1
2222
2222
250 mm dia Ductile Iron Class K - 7 Pipes
1
2514
2514.45
300 mm dia Ductile Iron Class K - 7 Pipes
1
3141
3141.1
350 mm dia Ductile Iron Class K - 7 Pipes
1
3723
3723.8
400 mm dia Ductile Iron Class K - 7 Pipes
1
4459
4459.45
450 mm dia Ductile Iron Class K - 7 Pipes
1
5400
5400.6
500 mm dia Ductile Iron Class K - 7 Pipes
1
6107
6107.95
100 mm dia Ductile Iron Class K - 9 Pipes
1
1071
1071.5
150mm dia Ductile Iron Class K - 9 Pipes
1
1609
1609.6
200 mm dia Ductile Iron Class K - 9 Pipes
1
2980
2980.9
250 mm dia Ductile Iron Class K - 9 Pipes
1
4079
4079.25
300 mm dia Ductile Iron Class K - 9 Pipes
1
4645
4645.45
350 mm dia Ductile Iron Class K - 9 Pipes
1
5299
5299.5
400 mm dia Ductile Iron Class K - 9 Pipes
1
6009
6009.2
450 mm dia Ductile Iron Class K - 9 Pipes
1
6989
6989.4
500 mm dia Ductile Iron Class K - 9 Pipes
1
8738
8738.6
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS : 8329
-
-
-
100 mm dia Ductile Iron Double Flanged
1
1530
1530.6
150 mm dia Ductile Iron Double Flanged
1
2295
2295.65
200 mm dia Ductile Iron Double Flanged
1
2895
2895.6
250 mm dia Ductile Iron Double Flanged
1
4107
4107.35
300 mm dia Ductile Iron Double Flanged
1
5277
5277.15
350 mm dia Ductile Iron Double Flanged
1
6642
6642.2
400 mm dia Ductile Iron Double Flanged
1
8520
8520
450 mm dia Ductile Iron Double Flanged
1
8978
8978.9
500 mm dia Ductile Iron Double Flanged
1
12682
12682
Providing and laying M.S black pipes P/E conforming to IS 1239 part I (2004) heavy (C class)- 350mm dia
1
7958
7958.85
Providing and laying M.S black pipes P/E conforming to IS 1239 part I (2004) heavy (C class)- 250mm dia
1
4474
4474.13
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket
-
-
-
100 mm dia pipes
1
94
94.8
150 mm dia pipes
1
150
150.35
200 mm dia pipes
1
221
221.9
250 mm dia pipes
1
270
270.65
300 mm dia pipes
1
346
346.2
350 mm dia pipes
1
367
367.6
400 mm dia pipes
1
564
564.2
450 mm dia pipes
1
653
653.1
500 mm dia pipes
1
697
697.55
Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement)
-
-
-
Up to 300 mm dia.
1
8539
8539.2
Over 300 mm dia.
1
8806
8806.75
Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as per IS : 9523
-
-
-
Up to 600 mm dia.
1
17971
17971.65
Over 600 mm dia.
1
25597
25597.9
Providing and laying D.I. Specials of Class K-12 suitable for push-on jointing as per IS : 9523
-
-
-
Up to 600 mm dia.
1
17102
17102
Over 600 mm dia.
1
23524
23524.1
Providing and fixing cast iron double flanged sluice valves PN -1.6 marked with IS 14846 including nuts and bolts marked with IS 1363, rubber sheet marked with IS 638 etc carriage, loading, unloading, stacking, handling, rehandling etc complete in all respect to the satisfaction of engineer in charge :100 mm dia class II
1
4453
4453.85
Providing and fixing cast iron double flanged sluice valves PN -1.6 marked with IS 14846 including nuts and bolts marked with IS 1363, rubber sheet marked with IS 638 etc carriage, loading, unloading, stacking, handling, rehandling etc complete in all respect to the satisfaction of engineer in charge :150 mm dia class II
1
6642
6642.55
Providing and fixing cast iron double flanged sluice valves PN -1.6 marked with IS 14846 including nuts and bolts marked with IS 1363, rubber sheet marked with IS 638 etc carriage, loading, unloading, stacking, handling, rehandling etc complete in all respect to the satisfaction of engineer in charge :200 mm dia class II
1
13496
13496.45
Providing and fixing cast iron double flanged sluice valves PN -1.6 marked with IS 14846 including nuts and bolts marked with IS 1363, rubber sheet marked with IS 638 etc carriage, loading, unloading, stacking, handling, rehandling etc complete in all respect to the satisfaction of engineer in charge :250 mm dia class II
1
22386
22386.3
Providing and fixing cast iron double flanged sluice valves PN -1.6 marked with IS 14846 including nuts and bolts marked with IS 1363, rubber sheet marked with IS 638 etc carriage, loading, unloading, stacking, handling, rehandling etc complete in all respect to the satisfaction of engineer in charge :300 mm dia class II
1
27485
27485.3
Providing lead caulked joints to old existing C.I. pipes and specials at required spots including testing of joints but excluding the cost of pig lead: 250mm dia DI pipe
1
990
990
Supplying pig lead at site of work.
1
26758
26758.75
Providing and fixing C.I. double acting air valve PN-1.6 marked with IS 14846 of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 100mm dia
1
8201
8201.3
Providing and fixing C.I. double acting air valve PN-1.6 marked with IS 14846 of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately). 80mm dia
1
6242
6242.9
Providing and fixing C.I. double acting air valve PN-1.6 marked with IS 14846 of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50mm dia
1
5159
5159.2
Providing and Fixing including successful testing and commissioning of double flanged 250 mm dia Non Return Valves of approved quality including all carriages complete job.
1
15000
15000
Providing , installation , testing and commissioning of IS marked 500/200/150 mm dia CI/ MS non return valve of reputed make complet job ,including nut bolts , rubber gasket, flanged tail pieces etc
-
-
-
i) 500mm dia
1
15000
15000
ii) 150mm dia
1
15001
15001
iii) 200mm dia
1
15002
15002
Providing/fabrication , Installation testing and commissioning of 500mm Dia MS dismantling joint for 16 kg pressure complete with nuts bolts , rubber gaskets and installation mechanism.The Job includes painting of two coats of steel primer and two coats of epoxy paint of reputed make complete job
1
156000
156000
Providing/Fabrication , installation of M.S Enclosures for non return valve/ Sluice valves/ bypass arrangements and dismantalling joint , fabricated out of 10mm M.s plate confirming to IS 2062 with locking arrangement .The job includes painting of two coats of steel primer and two coats of epoxy paint of reputed make, with all nuts and bolts complete job as per site requirement.
1
141
141.4
Providing / Fabrication , installation of MS cage for air releasing valve , fabricated out of 8mm M.S round bar complete with locking arrangement . The job includes, painting of two coats of anticorrosive steel primer and two coats of epoxy paint of reputed make complete with nuts bolts. Complete job
1
146
146.63
Providing/fabrication , installation, testing commissioning of MS easy /long radius bends /Tees/Tail pieces reducers of 500mm dia of various degrees up to 180 °as per site requirements. The job includes carriage to the site of work , position welding of job and cleaning of lose materials , grease / oil , painting of two coats of steel primer & two coats of epoxy paint of reputed make including the cost of nut bolts ,rubber gaskets & washers complete job.
1
175
175
Providing /fabrication , installation , testing and commissioning of 500/200/150 mm NB MS pipe both /single side flanged fabricated out of 8 to 10 mm thick MS plate of IS 2062 grade .The job includes painting of two coats of anti corrosive epoxy paint complete with nuts bolts & rubber gaskets
1
175
175
Providing /fabrication , installation , testing and commissioning of 500/200/150 mm NB MS pipe both /single side flanged fabricated out of 8 to 10 mm thick MS plate of IS 2062 grade .The job includes painting of two coats of anti corrosive epoxy paint complete with nuts bolts & rubber gaskets
1
175
175
Providing / Fabrication, installation , testing , commissioning of pipe restraint Harness compactable to the 500mm dia DI pipe . The restraint harness shall consist of a wedge action split type restraints on the collar side which shall be fabricated out of 25 mm thick MS flange and on the spigot side it should consist of twin split type flanged harness fabricated out of 2 nos of 25mm thick split type MS flanges . The restraint harness shall have 12 no individually actuated threaded wedges welded between the two split flanges at an equally distributed spaces that increase their resistance to pull-out both for internal pressure or external forces increase. The restraint harness and its wedging components shall be fabricated out of mild steel 40mm thick MS plate confirming to IS 2062 :2011 heat treated to a minimum hardness of 370 BHN .Torque limiting bolts shall be used to insure proper actuation of the restraining wedges. The split flanges shall also be fabricated out of 25 mm mild steel plate conforming to IS 2062: 2011 .The restraint device shall be adequately coated with two coats of steel primer and two coats of epoxy paint of reputed make for protection against corrosion The connecting rods/ studs that join the two rings shall be made of low alloy steel that conforms to IS 3757:1985 The assembly shall have a rated pressure 500mm dia DI
1
35000
35000
Providing /Fabrication , Installation , testing and commissioning of 300 mm dia By pass arrangement for the non return valve , including the cost of 150 mm dia ISI marked sluice valve, nuts &bolts , rubbergaskets and fitting mechanism , the job includes painting of two coats of steel primer and two coats of epoxy paint to the fabricated items complete job as per site requirement.
1
95000
95000
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:
-
-
-
1:3:6 or richer mix (i/c equivalent design mix)
1
1725
1725.2
1:4:8 or leaner mix (i/c equivalent design mix)
1
1064
1064.55
Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538
-
-
-
Upto 300 mm dia.
1
7455
7455.45
Above 300 mm dia.
1
8806
8806.75
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete
-
-
-
25 to 40 mm nominal bore
1
730
730.25
50 to 80 mm nominal bore
1
1387
1387.25
Providing, laying, jointing and testing S & S Centrifugally cast Ductile Iron double chamber class K-9 pressure pipes conforming to IS : 8329: 2000 with D.I double chambered restrained joints (bolt less), all complete 200mm nominal dia pipe
1
3260
3260.55
Providing, laying, jointing and testing S & S Centrifugally cast Ductile Iron double chamber class K-9/K-7 pressure pipes conforming to IS : 8329: 2000 with D.I double chambered restrained joints (bolt less), all complete 500mm nominal dia pipe
1
12339
12339
Providing and laying class K-12 Ductle Iron double chamber restrained joint (bolt less) specials such as tees, bends, collars, tapers and caps etc. conforming to IS : 9523 including testing of joint all complete . Upto 600mm dia.
15.36
30394
466866.43
Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job.
-
-
-
80 mm dia. pipe
1
1100
1100
100 mm dia. pipe
1
1520
1520
125 mm dia. pipe
1
1855
1855
150 mm dia. pipe
1
2150
2150
200 mm dia. pipe
1
3480
3480
250 mm dia. pipe
1
5030
5030
300 mm dia. pipe
1
7710
7710
350 mm dia. Pipe
1
9635
9635
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.
-
-
-
Serrated with central bulb (225 mm wide, 8-11mm thick)
1
283
283.25
Dumb bell with central bulb (180mm wide, 8mm thick)
1
229
229.75
Kickers (320mm wide, 5mm thick)
1
229
229.75
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage
1
554
554.1
Providing & fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge
1
800
800
Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.)
-
-
-
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
481
481.95
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
514
514.3
Polyester powder coated aluminum (minimum thickness of
polyester powder coated 50 microns)
1
522
522.7
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
-
-
-
Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
1
574
574.45
Powder coated aluminum (minimum thickness of powder coated 50 microns)
1
607
607.4
Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
1
616
616
Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron aluminum
1
95
95.85
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)
-
-
-
With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
1
1061
1061.95
With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
1
1201
1201.8
With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
1
1584
1584.45
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
1
207
207.35
Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-Charge.
-
-
-
12 mm dia and 100 mm length
1
142
142.75
12 mm dia and 150 mm length
1
149
149.45
20 mm dia and 150 mm length
1
176
176.2
20 mm dia, 225 mm length and above
1
189
189.6
Providing . Installation , testing and succeessful commissiononig of sludge motor of required discharge 1000 LPM and head of 10mtr including all sorts of accessories required like specified starter of required specification with preventive devices , Chain pulley, gantry, and disposal pipe and all sorts of accessories required to complete the job (actual amount to be paid as per VAT Bill dully authenticated by site Engineer incharge)
1
350000
350000
Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm
-
-
-
50 mm dia
1
530
530
62.5 mm dia
1
1110
1110
75 mm dia
1
1420
1420
100 mm dia
1
1990
1990
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND:
-
-
-
3 km
1
165
165.84
4 km
1
183
183.58
5 Km
1
200
200.74
Beyond 5 km upto 10 km per km
1
15
15.66
Beyond 10 km upto 20 km per km
1
13
13.09
Beyond 20 km per additional km
1
11
11.04
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate below 40mm :
-
-
-
3 km
1
165
165.84
4 km
1
183
183.58
5 km
1
200
200.74
Beyond 5 km upto 10 km per km
1
15
15.66
Beyond 10 km upto 20 km per km
1
13
13.09
Beyond 20 km per additional km
1
11
11.04
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above :
-
-
-
3 km
1
180
180.26
4 km
1
199
199.55
5 Km
1
218
218.19
Beyond 5 km upto 10 km per km
1
17
17.03
Beyond 10 km upto 20 km per km
1
14
14.23
Beyond 20 km per additional km
1
12
12
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling :
-
-
-
3 km
1
195
195.1
4 km
1
215
215.98
5 Km
1
236
236.16
Beyond 5 km upto 10 km per km
1
18
18.43
Beyond 10 km upto 20 km per km
1
15
15.4
Beyond 20 km per additional km
1
12
12.98
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement, stone blocks,G.I. C.I., A.C., Stainless Steel & C.C. pipes below 100 mm dia and other heavy materials
-
-
-
3 km
1
147
147.41
4 km
1
163
163.19
5 Km
1
178
178.43
Beyond 5 km upto 10 km per km
1
13
13.92
Beyond 10 km upto 20 km per km
1
11
11.63
Beyond 20 km per additional km
1
9
9.81
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Earth:
-
-
-
3 km
1
207
207.3
4 km
1
229
229.48
5 Km
1
250
250.92
Beyond 5 km upto 10 km per km
1
19
19.58
Beyond 10 km upto 20 km per km
1
16
16.36
Beyond 20 km per additional km
1
13
13.8
Carriage of materials by mechanical transport including loading, unloading, stacking of materials -Cement, stone blocks,G.I. C.I., A.C., Stainless Steel & C.C. pipes below 100 mm dia and other heavy materials
-
-
-
3 km
1
147
147.41
4 km
1
163
163.19
5 Km
1
178
178.43
Beyond 5 km upto 10 km per km
1
13
13.92
Beyond 10 km upto 20 km per km
1
11
11.63
Beyond 20 km per additional km
1
9
9.81
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks:
-
-
-
3 km
1
442
442.23
4 km
1
489
489.56
5 Km
1
535
535.3
Beyond 5 km upto 10 km per km
1
41
41.77
Beyond 10 km upto 20 km per km
1
34
34.9
Beyond 20 km per additional km
1
29
29.43
Carriage of materials by mechanical transport including loading, unloading, stacking of materials - wood:
-
-
-
3 km
1
189
189.53
4 km
1
209
209.81
5 Km
1
229
229.41
Beyond 5 km upto 10 km per km
1
17
17.9
Beyond 10 km upto 20 km per km
1
14
14.96
Beyond 20 km per additional km
1
12
12.61
Carriage of materials by manual means including loading, unloading, stacking of materials- (Sand)
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
43
43.69
Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate Below 40mm
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
43
43.69
Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate 40mm and Above
-
-
-
Ist 50m
1
216
216.94
Beyond Ist 50m
1
47
47.23
Carriage of materials by manual means including loading, unloading, stacking of materials- Stone Soling
-
-
-
Ist 50m
1
236
236.08
Beyond Ist 50m
1
51
51.4
Carriage of materials by manual means including loading, unloading, stacking of materials- Cement, stone blocks,G.I. C.I., A.C., Stainless Steel & C.C. pipes below 100 mm dia and other heavy materials
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
36
36.63
Carriage of materials by manual means including loading, unloading, stacking of materials- Earth
-
-
-
Ist 50m
1
200
200.67
Beyond Ist 50m
1
43
43.69
Carriage of materials by manual means including loading, unloading, stacking of materials- Cement, stone blocks,G.I. C.I., A.C., Stainless Steel & C.C. pipes below 100 mm dia and other heavy materials
-
-
-
Ist 50m
1
146
146.51
Beyond Ist 50m
1
21
21.5
Carriage of materials by manual means including loading, unloading, stacking of materials- Bricks
-
-
-
Ist 50m
1
374
374.58
Beyond Ist 50m
1
81
81.56
Carriage of materials by manual means including loading, unloading, stacking of materials- wood
-
-
-
Ist 50m
1
160
160.46
Beyond Ist 50m
1
23
23.55
Electrical Items:Supplying and fixing of 25mm dia. medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
1
103
103.5
Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)
1
824
824.55
Providing and carrying out wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2-way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
1
1215
1215.55
Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
-
-
-
Providing and carrying out circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (excl. cost of conduit)
-
-
-
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
1
192
192.05
2 x 4 sq. mm + 1 x 4 sq. mm earth wire
1
230
230
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
1
569
569.25
Supply and fixing of two module stepped type Electronic Fan regulator on the existing modular plate switch box including connections but excl cost modular plate etc., as required.
1
393
393.3
Supplying and fixing single pole 5 A to 32 A rating, 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the MCB DB complete with connections, testing and commissioning etc. as required.
1
228
228.85
Supplying and fixing double pole 63 Amp 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in MCB DB complete with connections, testing and commissioning etc. as required.
1
442
442.75
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
1
74
74.75
Supply of 24-Watt LED slim aluminum panel surface type complete in all respects.
1
600
600
Supply of 1200 mm sweep Ceiling Fans complete in all respects. Confirming to relevant Indian Standards
1
2125
2125
Supply of 200 mm nominal sweep Exhaust Fans including shutter from outside complete.Confirming to relevant Indian Standards
1
1550
1550
Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1
193
193.2
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
1
196
196.65
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
1
417
417.45
Supplying and fixing 12-way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
1
2360
2360.95
Providing, fitting and testing of LED flood light IP65 30W rating to pre-wired electric points on the outside of the Filter House building.
1
1500
1500
Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc., from main transformer to the main panel board including copper thimbles, earth work excavation and filling for laying of cable complete.
1
325
325
Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job.
-
-
-
10 KVA
1
27000
27000
20 KVA
1
37000
37000
25 KVA
1
42000
42000
30 KVA
1
47000
47000
40 KVA
1
57000
57000
50 KVA
1
67000
67000
Providing and fitting of panel board with angle iron supports and A.C. sheets for fixing of MCCB, change over switch, bus bars etc. The job includes nuts bolts and embedding of supports in cement concrete blocks complete job.
1
4250
4250
Providing and fitting of:
-
-
-
200 Amp. 4 pole Change over of reputed make
1
11200
11200
100 Amp 4 pole change over of reputed make.
1
7598
7598
64 Amp. 4 pole Change over of reputed make
1
5000
5000
32 Amp. 4 pole Change over of reputed make
1
2500
2500
200 Amp 3-phase copper bus bar
1
7500
7500
100 Amp-Copper bus bar
1
4550
4550
64 Amp-Copper bus bar
1
3750
3750
32 Amp-Copper bus bar
1
2850
2850
100 Amp MCCB
1
3300
3300
63 Amp MCCB
1
2700
2700
40 Amp MCCB
1
2100
2100
16 Amp MCCB
1
1250
1250
6 Amp MCCB
1
630
630
3-phase indicator points
1
445
445
3-phase voltmeter and Amperemeters
1
1190
1190
Providing and fitting of Fancy wall brackets and doom light of reputed make.
-
-
-
Mechanical Items:Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm
-
-
-
50 mm dia
1
530
530
62.5 mm dia
1
1110
1110
75 mm dia
1
1420
1420
100 mm dia
1
1990
1990
Providing, fitting, testing and commissioning of following items for Flash Mixer:
-
-
-
Mixing device with reduction gear system
-
-
-
3-phase Electrically driven motor:
-
-
-
0.5 HP
1
2800
2800
0.75 HP
1
3400
3400
1.0 HP
1
4800
4800
Foundation \ Base plate
1
4548
4548
Starter along with necessary wiring upto motor
1
1680
1680
Providing, fitting, testing and commissioning of following itemn for Alum Dosing Unit-
-
-
-
Mixing device with reduction gear system.
1
2500
2500
3-phase electrically driven motors:
-
-
-
0.5 HP
1
2800
2800
0.75 HP
1
3400
3400
1.0 HP
1
4800
4800
Foundation / Base plate
1
4548
4548
Starter along with necessary wiring upto motor
1
1680
1680
P.V.C outlet, overflow system with fittings upto point of application
1
530
530
150mm dia drain out let
1
1350
1350
50 mm dia Service water piping.
1
530
530
Constant dozing unit with time device
1
1500
1500
Manually operated hoist
1
10000
10000
Providing, fitting, testing and commissioning of following itemns for Chlorine Dosing Unit-
-
-
-
Mixing device with reduction gear system.
1
2500
2500
3-phase electrically driven motors:
-
-
-
0.5 HP
1
2800
2800
0.75 HP
1
3400
3400
1.0 HP
1
4800
4800
Foundation / Base plate.
1
4548
4548
P.V.C outlet, overflow system with fittings upto point of application.
1
530
530
Starter along with necessary wiring upto motor
1
1680
1680
150 mm dia Drain out let
1
1350
1350
50mm dia service water piping
1
530
530
Constant dozing unit with time device.
1
1500
1500
Providing and fixing D.I. sluice valves Class 1 (with cap) complete with rubber insertions, bolts, nuts, extention rod, joint connector, supporting pedestal with base plate, top plate and necessary anchoring bolts etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
80 mm dia.
1
14058
14058
100 mm dia.
1
17210
17210
125 mm dia.
1
21000
21000
150 mm dia.
1
26720
26720
200 mm dia.
1
42300
42300
250 mm dia.
1
66440
66440
300 mm dia.
1
83100
83100
350 mm dia.
1
181060
181060
Air Scouring Arrangements
-
-
-
Providing fitting, testing and comissioning of air blower standard make ISI mark capable of providing compression @ 0.35 kgs/sqcm coupled with suitable 3 phase induction electric motor complete with auxiliary pipe system upto filter beds with pressure guage, Nozzles, foundation block, base plate, air check valve , non- return valve, Starter etc
-
-
-
2.10 KLPM Air blower with 2.0 HP Motor.
1
67500
67500
4.2 KLPM Air blower with 5.0 HP Motor.
1
87500
87500
8.2 KLPM Air blower with 7.5 HP Motor.
1
125000
125000
10.6 KLPM Air blower with 10.0 HP Motor.
1
153400
153400
12.3 KLPM Air blower with 12.50 HP Motor.
1
163400
163400
16.80 KLPM Air blower with 15.0 HP Motor.
1
175400
175400
Up Wash Arrangements
-
-
-
Supply installation and successful testing and commissioning of mono block pumping unit standard make ISI mark coupled with 2 phase induction motor with appropriate pumping capacity so as to fill the tank within the max. of 2 hours with nominal dynamic head of 25m along with all accessories like foot valves, non- return valves, foundation block, base plate, suction pipe, suitable rising main with nominal dia 50mm (class-B) with heavey duty valves and other accessories required for the job.
-
-
-
Pumping unit with 5.0 HP Motor.
1
20268
20268
Pumping unit with 7.5 HP Motor.
1
29115
29115
Pumping unit with 12.5 HP Motor.
1
46486
46486
Pumping unit with 15.0 HP Motor.
1
49866
49866
P/F testing and commissioning of MS Rotating Desludging Bridge comprising of following items:
-
-
-
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for the Installation Testing and Commissioning of Half Bridge with Central Drive mechanism, scrapper and churners for required dia Clarifer.
-
-
-
Riveted and bolted
1
105
105.77
Welded
1
102
102.14
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
-
-
-
On steel work
1
188
188.8
On concrete work
1
183
183.43
Central axle turn table with double bearing and guide for incoming cable.
1
4800
4800
Peripheral drive assembly with following motors, gear box, rollers, drive trolly (60:1 reduction gear box).
-
-
-
Pumping unit with 2.0 HP Motor.
1
19120
19120
Pumping unit with 5.0 HP Motor.
1
24268
24268
Pumping unit with 7.5 HP Motor.
1
33115
33115
Starter along with necessary wiring upto motor
1
1680
1680
Flocculator drive assembly with crown wheel, pinion sets, reduction gear (40:1) with motors complete job.
-
-
-
0.5 HP
1
5300
5300
0.75 HP
1
5900
5900
1.0 HP
1
7300
7300
Incoming cable, telescopic electric pole with rotary current collector
1
6500
6500
Providing and laying/fixing S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes Class K-7 conforming to IS : 8328
-
-
-
100 mm dia
1
1108
1108.15
150 mm dia
1
1581
1581.25
200 mm dia
1
1947
1947
250 mm dia
1
2504
2504.8
300 mm dia
1
3129
3129.2
350 mm dia
1
3707
3707
400 mm dia
1
4440
4440.2
450 mm dia
1
5378
5378.15
Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement)
-
-
-
Up to 300 mm dia.
1
8539
8539.2
Over 300 mm dia.
1
8806
8806.75
Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job.
1
147
147
Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc ., suitable for flanged jointing as per IS : 1538
-
-
-
Up to 300 mm dia.
1
8539
8539.2
Over 300 mm dia.
1
8806
8806.75
Operation and maintainence cost of scheme for 05 years after completion of defect liability period complete in all respects by maintaining all the instruments during warranty period and Operation and maintainence for 05 years with replacement/repair of all damaged or non functioning units/components including accessories subject to actual expenditure and to maximum ceiling of the approved O&M cost fixed year wise.
-
-
-
1ST Year
1
3494509
3494509.2
2ND Year
1
5241764
5241764
3RD Year
1
6989018
6989018.41
4TH Year
1
8736273
8736273.02
5TH Year
1
10483527
10483527.62
Electro Mechanical Part: Watlab Stage 1st Raw Water Stage
-
-
-
Providing, installation, testing and commissioning of vertical turbine pumping unit driven by Hollow shaft Motor for pumping water at WSS Zaingeer Sopore at an altitude of 1600 M (AMSL). The specification are as under :“A” Pump:
1.Discharge = 625 m3/h 2.Type = Self water lubricated, vertical turbine pump with delivery below machine floor level).
3.Liquid to be handled = Contaminated water having solids in suspension 4.RPM = 1450 5.Head = 100 Meters 6.Efficiency = 75% without negative tolerance 7.Material of Impeller = Semi enclosed open shrouded impellers mixed flow (Bronze grade V of BIS 318) 8.Impeller dia = BR/ as recommended/design 9.Hydrotest PR = 23 kg/cm2 10.Material shaft = Stainless steel AISI-410, minimum dia 55.8 mm 11.Material of impeller shaft = Stainless steel AISI-410 12.Intermediate shaft = Stainless steel
13.Column pipe = Heavy duty Mild steel column pipe as per IS226/2062, 250mm nominal dia (lengths for each piece of columns should not exceed 1.524mm) i.e. to be fabricated in suitable pieces . Thickness of column pipe 8mm
14.Suction strainer = MS fabricated with anticorrosive protection
15.Bell mouth = CI16.Pump Bowl = CI (pump bowls should be fastening through screws)17.Size = 250 mm18.Prime mover = 201 kW minimum 19. Flanged MS TEE in 8mm thick with arm length 2’,2’and 8”(dimensions may slightly vary thus to be fabricated at site as per site requirement) with 24 mm flange thick ness
20.Levels:Sump bed level = 1537 Meters Machinery floor level = 1547Meters Minimum water level = 1.5 Meters Minimum submergence = 1.5 Meters Level are as per design of sump. Pump bowl to be designed with minimum number of stages. Not more than 4 stages. Note column pipe length is to be approved before installation 21. Providing and fitting of Pressure Guage in the delivery side "B" Motor 1.Type = Hollow Shaft induction motor2.Rating =Minimum 300 HP 3. Frequency = 50 ± 3 % Hz
4.Working Voltage = 415 ± 15 V, 03 phase 5.RPM = 1485 (sync)
6.Efficiency = Not less than 80% 7.Class of insulation = F/H
8.Type = hollow shaft 9.Quantity = One Number 10.Bearings = Thrust bearing shall be suitable and of adequate capacity 02 C jobs 2850000 5700000.00 to carry the weight of all rotating parts and the hydraulic down thrust. 11.Coupling set , Ratchet = Non-reversing ratchet or similar mechanism should be provided to the pump /motor to prevent reverse rotation. 12.Continuous maximum rating = Continuous maximum rating of the motor shall be at least 20% above the maximum power absorbed by the pump under any operating point within stipulated head range of the pump or at least 10% above the power required at shut-off, whichever is higher.
13.Discharge Head: Discharge head (below Machine Floor Level) shall be fabricated from MS. It shall be incorporated in full diameter elbow mounting flange for motor with suitable tapping for pressure gauge. The discharge head shall be of robust construction and shall be designed to support entire static and dynamic load of pump assembly, water column and motor. The discharge head shall have an arrow indicating direction of rotation of pump. The discharge head may have a stuffing box with renewable bushing. The location shall be easily accessible. The lantern ring and gland follower shall be split type. It shall incorporate suitable arrangement to collect gland leakage and lead to sump with suitable piping. The discharge head should have suitable size valve arrangement for air release
1
2850000
2850000
Providing, supplying and fitting of Heavy-duty MS Pipe at site for fabrication of Delivery main-fold and washout Size ND : 300 mm dia. Class: (Heavy class) Thickness 8mm with two Coating of Black Bituminous and two coats of enamel paint of approved shade.
1
9000
9000
Providing, supplying and fitting of MS flanges. The Thickness of flange shall conform to IS 6392 Part 1st Table-17. Dia ND: 300 mm. The flange welding shall be carried out in double layers using Advani/Esab/L&T- SS Bond make electrodes to form strong welding joint by dint of DC arc welding. The job further includes Providing and Fitting of nuts and bolts (conforming to IS:1363 Part 1st) and Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints
1
3000
3000
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units . Size: DN 300 mm PN:1.6/16 Rest Specifications Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job
1
65000
65000
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. Size: 300 mm. PN: 1.6/16
Rest Specifications
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
1
75000
75000
Fabrication, Providing and fitting of flanged easy/long bends/elbow to delivery manifold/ suction and washout, including nuts and bolts and rubber gaskets as per requirement. Dia : 300 mm. Rest of Specification:
Fabrication, providing and fitting of 8 mmm thick MS pipe long /easy bend/elbow as per site requirement to be fabricated out of heavy class MS pipe, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
12000
12000
Fabrication, Providing and fitting of flanged Washout Tee, including nuts, bolts and gasket as per site requirement.Dia = 300 mm
Rest Specifications
Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each (Approx). The Tee shall be fabricated out of Heavy class MS pipe 8mm thick with M.S Flanges fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
15000
15000
Fabrication, Providing and fitting of flanged Y- Junction, including nuts, bolts and gasket as per site requirement.
Dia = 300 mm
Rest Specifications
Fabrication, providing and fitting of Y-Junction with arm length 1 m each (Approx). The Tee shall be fabricated out of Heavy class MS pipe 8mm thick with M.S Flanges fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
25000
25000
Fabrication ,Providing and fitting of flanged Dismantle Joint in Three pieces in delivery manifold, including nuts and bolts and rubber gaskets as per requirement.
Dia : 300 mm
Rest of Specification:
Fabrication, providing and fitting of flanged Dismantle Joint in Three pieces as per site requirement to be fabricated out of heavy class MS pipe 8 mm thick, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
25000
25000
Fabrication ,Providing and fitting of flanged Enlarger MS Tail piece with one site 250 mm dia and other side 400 mm. To be fitted in delivery line after manifold with the 400 mm dia rising main, including nuts and bolts and rubber gaskets as per requirement.
Dia : 300-400 mm
Rest of Specification:
Fabricated out of heavy class MS pipe 8 mm thick, 1 m min length or as per site requirement, flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade
1
18000
18000
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting motors from panel , stabilizers, motors in rubber conduit/PVC pipes/GI 8” cable tray (as per site requirement) dulty fitted on the wall with heavy duty clamps/ISA frames as per site requirement . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
Size: 240 sq mm
1
3800
3800
Providing, installation, testing of power service cable for working voltage up to and including 1100 volts; armored aluminum 3.5 core cable as service line from output terminals of HT/LT transformer to cubical panel to main Panel. Cost includes laying of cable in trenches in PVC conduit/Pipe where ever necessary, it is to be laid underground or on cable tray to be fabricated in MS(ISA/Pipe)as per site requirement included is termination of ends with suitable Aluminum tube terminals dully crimpled & taped
Size : 400 sq mm
1
2600
2600
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting earthing phase of gadgets like panel , stabilizers, in rubber conduit/PVC pipes/GI 8” cable tray (as per site requirement) dulty fitted on the wall with heavy duty clamps/ISA frames as per site requirement . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
Size: 35 sq mm
1
546
546
Providing, fitting, testing and commissioning of voltage stabilizer as per specifications below: Capacity : 500 KvA Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step. Type of Regulator : Double plate type 18”x18” with electrolytic copper contacts. Input voltage : 250-400 volts.(3 phase) Output voltage : 400 ±10% volts. Frequency : 50 ±3 C/S.
Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fiber glass insulations to tested parameters. Cooling : Naturally, Oil cooled Temp. Rise (Max) : 30°C above ambient Mounting : On Uni-directional wheels. Correction rate : 30 volts per step Wave form distortion : virtually nil Duty cycle : 100% continuous. Enclosure : MS sheet 5 mm thickness enclosure in pressed CGR Sheet powder coated with radiators. Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations. Load : Three phase induction motor load. Load Amperes (continuous) Fitted with heavy duty wheels Fins for cooling of T-oil. Overload in 24-hours operation: 10% above continuous Ampere rating. The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s). Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications Minimum weigh of the cupper wire used for coils and connections=210 Kgs Aprox,
1
750000
750000
Minimum weight of the core 500 Kgs approx. Minimum T-oil to be filled 600 ltrs Aprox Inspection of the material is to be done by the concerned Site Engineer at the time of manufacturing and approved Scope: Design, manufacturing ,providing , fitting, testing & commissioning of Star-delta ATS type Motor control gear Panel The Star-delta Motor control gear Panel shall be fabricated out of 2 mm CRCA Sheets Modular, powder coated, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 42 protection) with TP copper Buses, complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below: Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three Enclosure Details ----- Free Standing, Floor mounted, Compartmentalized Design. Material ----- CRS Thickness of sheet steel used ----- 02mm Application ----- Indoor Cable Entry ----- Bottom Painting ----- Shade Siemens grey. Size: width should not exceed 36 inches. Distribution bus bar Type -----Electric grade CU with red, blue & yellow tapings Rating----- 800 Amp Starters (FASD) Power Specification -----3 phase, 415 ± 15% v & 50 Hz Contactors : Type LC1 FDP AC type coil series) Line Contactor ----- AC3 800 A Delta Contactor --- AC3 800 A Star Contactor ----- AC3 630 A Contactor Make = TC / Schneider Timer ----- Heavy Duty as per Star Delta Electronic (Schneider/L&T) Overload relay – Heavy Duty as per design (Schneider/L&T) Coil Voltage : 220/240V Single Phase Preventer: Allied accessories as per design. Qty ----- 1 No’s ATS Coil in separate enclosure width should exceed 36 inches (Detachable)
1
750000
750000
Design, manufacturing, providing, fitting, testing & commissioning of Main control Panel.
The control gear Panel shall be fabricated out of 14 SWG CRCA Sheets Modular, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 55 protection) with TP Copper Buses as per load , complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below:
Rated Voltage of the Panel ----- 440 Volts
Frequency ----- 50 HZ
No of Phases ----- Three
Enclosure Details ----- Free Standing, Floor mounted,
Compartmentalized Design.
Material ----- CRS
Thickness of sheet steel used ----- 02mm
Application ----- Indoor
Cable Entry ----- Bottom
Painting ----- Shade Siemens grey.
a) Mian Circuit Breaker incoming combined
Type ----- 4 pole Draw Out ACB
Rating : 800 A
Qty -----1
No. of poles ----- 4
Rated operational voltage----- 415 V AC ± 15%
Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking cap
at (415 volt A C , 50 Hz ) ----- 50kA b) Distribution bus bar
Type -----Electric grade Cu with red, blue & yellow tapings
of adequate section.
1
650000
650000
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
Make = Reputed make globe
Capacity = 5 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
1
98436
98436
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
Make = Reputed make globe
Capacity = 3 ton (P)
No. Of load chain falls = 2 or above Min. Height of lift = 6 M
1
62972
62972
Supply, Installation, commissioning and testing of 5 Ton Capacity Electrically operated overhead Travelling Crane (span 6.2m and lifting height 13.5 m Aprox)/ site requirement complete as per IS3177/is 807/bs2573/ equivalent including end girders, rail with run way beam, rail complete, panels in all respect as per dimension of the machine room.
All the operations through pendent Push Button station suspended from hoist panel IP 54 protection unbreakable PVC Molded. Cables: PVC sheathed flexible type multicore cu cable ISI marked tested at 11000 grade.
Hoist shall be duty painted with on coat of zinc metal primers and two coats of yellow enamel paint
Safet features EMG ON/OFF
Limited switches for hoisting motion provided
Overload and motor protections provided
Brake protection provided.
Brake fails safe electromagnetic DC Disc type in Main Hoist Only
All motors are TEFC squirrel cage 40% CDF , 150 Starts per Hr., AC s4 crane, Class F insulation, Suitable for 415+-10%, 50Hz 3 phase The adjustment & maintenance of break shall be quick and simple. Test: The hoist supplied is to be tested at 25% overload and the test certificate of the same be provided at the time of installation. The complete unit as specified above is required to be fitted / tested at site.
Besides the above works the job Includes Providing and fitting 3-Core 6 sq. mm ,50 m or as per site submersible cable for providing power supply to motor of chain Hoist including P/F protection device of suitable capacity.
Job includes inspection of the same and all test certificate duly approved Job includes supply of heavy-duty lifting sling belts 3m long 3 MT capacity -4 nos
1
550000
550000
Providing and fitting of reduction gear and and 3 Phase 7.5 HP motor to the existing trolley system. The job includes cabling, starter and fabrication of the protection shed to cover the unit by CGI/ISA and concrete grouting’s of legs. The job including testing of the same on load/ no load.
1
20000
20000
Supply of heavy duty hand Pallet 2.5 Ton capacity with PU wheels of reputed make.The said equipment is used for lifting/shifting of electromechanical gadgets in the scheme. The minimum fork height approx. 85 m and maximum fork height approx- 200 mm / as per design opproved.
Job includes supply of heavy duty lifting sling belts 3m long 3 MT capacity -4 nos
1
40000
40000
Illumination of Premises:
Providing and erection of 8 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
1) 3 Way Terminal Connector 20 Amp.
2) 3 No MCB 8 Amp.
The job includes fabrication, providing and fitting of three arm GI structure at the top having 120˚ angle between arms and each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2 mm copper wire from each terminal connector to each holding arm.
The pole is mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” (cost of concreting not included in the job) using 04 No anchor bolts of required size not less than 7” in length. The complete job includes earthing in GI Electrode.
1
27000
27000
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole vide
Having following specs:
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68.
The LED is properly fitted on the arm of the pole and connected to the copper as provided in the high mast pole.
1
9486
9486
Providing and installation of Junction Box with DP 32Amp MCB to serve as main switch for LED lighting including complete wiring min 20-30 m or as per site requirement up to control at machine room.
1
2227
2227
Providing, Installation and testing of 3KVA fully automatic voltage stabilizer with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit including all accessories required as per site location and site of installed is to be provided by site In-charge.
1
12500
12500
Providing & fitting of lighting points for ( machine room , operators room,) as per site requirement in 1.5 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit pipe by way, switches, socket modules , regulators ,indicators, 08/10/12 watt LED lamps Surface light Make. Included is cost on account of modular switch boards with the wooden frames as per site requirements
1
2000
2000
Providing fitting of heating points in 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit by way of p / f of 15 Amp switches, 6 pin socket on modular fitting as per site requirements. Heating points are to be connected from main control panel. All accessories required is to be provided by the firm
1
2500
2500
Providing and fitting of 9” x 9”exhaust fan with complete wiring in 1.5 mm cu wire through conduit and 6 A modular control complete job.
1
2500
2500
Providing and fitting of wall/ceiling fan ( as per site requirement) with complete wiring in 1.5 mm cu wire through conduit and 6 A modular control complete job.
1
4500
4500
Providing, fitting of Distribution Board of reputed make 4 way S P N single door powder coated sheet steel enclosure for surface mounting fitted with bus bar, DIN channel, neutral link and incoming contact. the above DB is to be provided /fitted with double pole 40 amp MCB for Main. 32 A for heating circuit & rest 3 of 16/6 amps each for premises luminary, auxiliary circuit of reputed make. Further job includes providing / fitting 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit as service line from main panel as per site requirements. Connections should be made in such a way Lighting points is to be connected via automatic transformer by way of p/f switch socket arrangement with allied fixtures & and heating points to main panel. Job includes dismantling of existing damaged conduit , wires, conduit and cleaning the surface properly
1
4500
4500
Earthing of substation- P/I of earthing station comprising of company fabricated earthing electrode. The job includes Auguring of bore of required dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards as per site requirement. Safe earthing electrode size : 80 mm dia (As specified), Length : as per latest relevant standard . Back fill compound as per requirement
1
10462
10462
Fabrication, providing, fitting of base frame for pumping units , covering of holes , fabrication of gantry, ladder door/window covering, gantry fabricated out of ISMC/ISMB/ISA/Bars/MS Pipe/MS plain/ chequered/MS Sheets/MS tubes. Including making of holes in concrete, including zinc metal primer 1 coat and two coats of approved shade . The works is to be executed as per site requirement and as per dimensions of Pumping unit and as per directions of site engineer
1
135
135
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. with 2-core 4 mm2 Cu ( 25 m) wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc of reputed make for proper fitment and installation of the item
1
34053
34053
Supply, installation of 6 kg CO2 type fire extinguisher with IS mark The co2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipment.
1
6447
6447
Providing, laying & fixing of shock proof rubber mats with adhesive/bonding material on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: -
Composition: Rubber (synthetic mats for electrical purpose)
Thickness: - 2.5mm Size: - 1M wide.
1
1205
1205
Providing of TOOL KIT For Maintenance: -
The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of :
Providing of tool kit consists of following items
i.Double ended Spanner (Chrome plated) 01 sets complete (12 Pcs) ii.
Double ended Ring spanners chrome plated 01 sets complete (12 Pcs)
iii.Allen key set black finish 01 sets complete
iv.Combination Pliers insulated with thick C.A sleeve; size in mm 165, 210, each – 01 No.
v.Long nose plier insulated with thick C.A sleeve; size in mm 165, 205 each – 01 No.
vi.Insulated screw Drivers with different blade(star/plate) and tip dimensions lengths 4 Nos
vii.Insulated screw driver set- 1 set
viii.Hammer with handle weight – 200-250 gm , 340-600 gm –each – 1No. .
ix.Heavy duty pipe Wrench length in mm - 200, 300, 600,500 each – 02 No.
x.Digital multimeter – 1No.
xi.Digital Clamp tester capable to measure up to 400A - 1 No.
xii.Hack saw frame with hack saw blade – 01 no.
xiii.S-16 MXL, S- 16 H X L Socket Set (19 sockets + 6 Accessories) – 01 No.
xiv.Heavy duty webbling sling belt of 5 MT capacity 3m-2 No, 5 m -2 NO
xv.Potable invertor arc welding machine (IgbT protected)with all accessories cable and clamp, and 10 electrode boxes
1
40000
40000
Providing of good quality bedding for night stay/Shift consisting of: -
i) Mattress with warm cover size 6'x3' (5-6Kg)- 02 No’s
ii) Quilt with warm cover size 5'x8' (5-6Kg)- 02 No’s
iii) Pillows with covers - 02 No’s
iv) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
b)
The job also includes providing of pressure Hawkins cooker 5ltr 02 No’s, Steel patella (utensil) 5ltrs 02 No’s, cooking heater 01 No., room heater 01 No., steel buckets 10 litre capacity 01 No., samrudi Plastic bucket 10 litre capacity with Mug 02 No’s each, steel glasses 06 No’s, steel Plates with large spoons and bowls 03 No’s each, Cup and Saucer set (01 No. Set) and, 5kg Gas cylinder with burner/ stove. The job also includes providing of thermo-cool 180 sft along with excel matting of 180 sft (size as requirement). The job also includes providing of unbreakable Samrudi/Samrath Plastic Chair table set consisting of chairs 04 No’s, extra heavy Table 01 No. The job also includes providing of good quality safety Door locks (03 No’s) of Godrej, Link locks,
1
39619
39619
Fabrication of 6’ x 3’ x 2 No angle iron bed by way of providing and fitting of Structural steel in built up sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded
1
110
110
Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet, 2 no’s including cutting, fixing all complete including painting of the play sheet by one coat of primer and two coats of enamel paint
1
150
150
Providing of solar/electrical lantern chargeable on both solar & electrical 220v supply
1
2000
2000
Providing of bamboo ladder 18 feet long with 15 feet long link rods and HT gloves pair (01 each)
1
7350
7350
Providing of 1 KW heat convector for operators for winter season
1
1205
1205
WSS Watlab Stage 2nd Clear Water Stage
-
-
-
Providing, installation, testing and commissioning of vertical turbine pumping unit driven by Solid shaft motor for pumping water at an altitude of 1600 M (AMSL). The specification are as under:
“A” Pump :1.Discharge = 625 m3/h 2.Type = Self water lubricated, vertical turbine pump with delivery above floor level).
3. Liquid to be handled = Contaminated water having solids in suspension
4. RPM = 1485 5. Head = 110 Meters 6.Efficiency = 75% without negative tolerance 7. Material of Impeller = Semi enclosed open shrouded impellers mixed flow (Bronze grade V of BIS 318) 8.Impeller dia = BR/ as per design
9.Hydrotest PR = 23 kg/cm2 10. Material Solid shaft and Solid shaft coupling = Stainless steel AISI-410 with thickness minimum 55.8 mm
11. Material of impeller shaft = Stainless steel AISI-410
12.Intermediate shaft = Stainless steel 22.Column pipe = Heavy duty Mild steel column pipe as per IS226/2062, 250mm nominal dia (lengths for each piece of columns should not exceed 1.524mm) i.e. to be fabricated in suitable pieces . Thickness of column pipe 8mm
13.Suction strainer = MS fabricated with anticorrosive protection
14. Bell mouth = CI 15.Pump Bowl = CI (pump bowls should be fastening through screws) 16.Size = 250 mm 17.Prime mover = 313 kW
18.Levels: Sump bed level = 1549.232 Meters
Machinery floor level = 1544.032 Meters
Minimum water level = 1.5 Meters
Minimum submergence = 1.5 Meters 11.
Coupling set , Ratchet = Non-reversing ratchet or similar mechanism should be provided to the pump /motor to prevent reverse rotation.
1
3200000
3200000
Providing, supplying and fitting of Heavy-duty MS Pipe at site for fabrication of Delivery main-fold and washout
Size ND : 300 mm dia
Class: (Heavy class) Thickness 8mm with two Coating of Black Bituminous and two coats of enamel paint of approved shade.
1
9000
9000
Providing, supplying and fitting of MS flanges. The Thickness of flange shall conform to IS 6392 Part 1st Table-17
Dia ND: 300 mm
The flange welding shall be carried out in double layers using Advani/Esab/L&T- SS Bond make electrodes to form strong welding joint by dint of DC arc welding. The job further includes Providing and Fitting of nuts and bolts (conforming to IS:1363 Part 1st) and Rubber Insertion Gaskets (conforming to IS: 638/79) to be used between flanged joints
1
3000
3000
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
Size: DN300 mm
PN:1.6/16
Rest Specifications
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. TheGate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job
1
65000
65000
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312.
Size: 300 mm
PN: 1.6/16
Rest Specifications
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
1
75000
75000
Fabrication, Providing and fitting of flanged easy/long bends/elbow to delivery manifold/ suction and washout, including nuts and bolts and rubber gaskets as per requirement.
Dia : 300 mm
Rest of Specification:
Fabrication, providing and fitting of 8 mmm thick MS pipe long /easy bend/elbow as per site requirement to be fabricated out of heavy class MS pipe, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
12000
12000
Fabrication, Providing and fitting of flanged Washout Tee, including nuts, bolts and gasket as per site requirement.
Dia = 300 mm
Rest Specifications
Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each (Approx). The Tee shall be fabricated out of Heavy class MS pipe 8mm thick with M.S Flanges fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
15000
15000
Fabrication, Providing and fitting of flanged Y- Junction, including nuts, bolts and gasket as per site requirement.
Dia = 300 mm
Rest Specifications
Fabrication, providing and fitting of Y-Junction with arm length 1 m each (Approx). The Tee shall be fabricated out of Heavy class MS pipe 8mm thick with M.S Flanges fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
25000
25000
Fabrication ,Providing and fitting of flanged Dismantle Joint in Three pieces in delivery manifold, including nuts and bolts and rubber gaskets as per requirement.
Dia : 300 mm
Rest of Specification:
Fabrication, providing and fitting of flanged Dismantle Joint in Three pieces as per site requirement to be fabricated out of heavy class MS pipe 8 mm thick, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
25000
25000
Fabrication ,Providing and fitting of flanged Enlarger MS Tail piece with one site 250 mm dia and other side 400 mm. To be fitted in delivery line after manifold with the 400 mm dia rising main, including nuts and bolts and rubber gaskets as per requirement.
Dia : 300-400 mm
Rest of Specification:
Fabricated out of heavy class MS pipe 8 mm thick, 1 m min length or as per site requirement, flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
18000
18000
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting motors from panel, stabilizers, motors in rubber conduit/PVC pipes/GI 8” cable tray (as per site requirement) duly fitted on the wall with heavy duty clamps/ISA frames as per site requirement. The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
Size: 300 sq mm
1
4500
4500
Providing, installation, testing of power service cable for working voltage up to and including 1100 volts; armored aluminum 3.5 core cable as service line from output terminals of HT/LT transformer to cubical panel to main Panel. Cost includes laying of cable in trenches in PVC conduit/Pipe where ever necessary, it is to be laid underground or on cable tray to be fabricated in MS(ISA/Pipe)as per site requirement included is termination of ends with suitable Aluminum tube terminals dully crimpled & taped
Size : 500 sq mm
1
2800
2800
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting earthing phase of gadgets like panel , stabilizers, in rubber conduit/PVC pipes/GI 8” cable tray (as per site requirement) dulty fitted on the wall with heavy duty clamps/ISA frames as per site requirement . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
Size: 35 sq mm
1
546
546
Providing, fitting, testing and commissioning of voltage stabilizer as per specifications below: Capacity : 600 KvA Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step. Type of Regulator : Double plate type 18”x18” with electrolytic copper contacts. Input voltage : 250-400 volts.(3 phase) Output voltage : 400 ±10% volts. Frequency : 50 ±3 C/S. Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fiber glass insulations to tested parameters. Cooling : Naturally, Oil cooled Temp. Rise (Max) : 30°C above ambient Mounting : On Uni-directional wheels. Correction rate : 30 volts per step Wave form distortion : virtually nil Duty cycle : 100% continuous. Enclosure : MS sheet 5 mm thickness enclosure in pressed CGR Sheet powder coated with radiators. Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations. Load : Three phase induction motor load. Load Amperes (continuous) Fitted with heavy duty wheels Fins for cooling of T-oil. Overload in 24-hours operation: 10% above continuous Ampere rating. The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s). Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications Minimum weigh of the cupper wire used for coils and connections=240 Kgs Aprox, Minimum weight of the core 550 Kgs approx. Minimum T-oil to be filled 650 ltrs Aprox Inspection of the material is to be done by the concerned Site Engineer at the time of manufacturing and approved
1
850000
850000
Scope: Design, manufacturing, providing, fitting, testing & commissioning of Star-delta ATS type Motor control gear Panel
The Star-delta Motor control gear Panel shall be fabricated out of 2 mm CRCA Sheets Modular, powder coated, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 42 protection) with TP copper Buses, complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below:
Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three Enclosure Details ----- Free Standing, Floor mounted,
Compartmentalized Design. Material ----- CRS Thickness of sheet steel used ----- 02mm Application ----- Indoor Cable Entry ----- Bottom
Painting ----- Shade Siemens grey. Size: width should not exceed 36 inches.
Distribution bus bar Type -----Electric grade CU with red, blue & yellow tapings Rating----- 800 Amp Starters (FASD) Power Specification -----3 phase, 415 ± 15% v & 50 Hz Contactors : Type LC1 FDP AC type coil series)
Line Contactor ----- AC3 800 A Delta Contactor --- AC3 800 A
Star Contactor ----- AC3 630 A Contactor Make = TC / Schneider
Timer ----- Heavy Duty as per Star Delta Electronic (Schneider/L&T)
Overload relay – Heavy Duty as per design (Schneider/L&T)
Coil Voltage : 220/240V Single Phase Preventer: Allied accessories as per design. Qty ----- 1 No’s ATS Coil in separate enclosure width should exceed 36 inches (Detachable) ATS Coil Rating : 400 HP ATS Coil should be fabricated out of copper strips (minimum weight of each leg without
Core minimum 22 kgs) Enclosure : Modular CRG Sheet, powder coated fitted back side of panel on nuts and bolts. T-Oil :Filled with T-Oil of proper grade . Connections : PVC Insulated heavy duty Cu wire duly thimbled Qnty---01 no Power factor correction panel in separate enclosure fitted on top of the panel with should not exceed 36 inches ( Detachable)
Voltage Input : 280-460 V Frequency : 50 +- 5% c/s Ambient temperature: -
1
775000
775000
Design, manufacturing, providing, fitting, testing & commissioning of Main control Panel.
The control gear Panel shall be fabricated out of 14 SWG CRCA Sheets Modular, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 55 protection) with TP Copper Buses as per load , complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below:
Rated Voltage of the Panel ----- 440 Volts
Frequency ----- 50 HZ
No of Phases ----- Three
Enclosure Details ----- Free Standing, Floor mounted,
Compartmentalized Design.
Material ----- CRS
Thickness of sheet steel used ----- 02mm
Application ----- Indoor
Cable Entry ----- Bottom
Painting ----- Shade Siemens grey.
a) Mian Circuit Breaker incoming combined
Type ----- Draw Out ACB
Rating : 1000 A
Qty -----1
No. of poles ----- 4
Rated operational voltage----- 415 V AC ± 15%
Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking cap
at (415 volt A C , 50 Hz ) ----- 50kA
b) Distribution bus bar
Type -----Electric grade Cu with red, blue & yellow tapings
1
850000
850000
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
Make = Reputed make globe
Capacity = 5 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
1
98436
98436
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
Make = Reputed make globe
Capacity = 3 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
1
62972
62972
Supply, Installation, commissioning and testing of 5 Ton Capacity Electrically operated overhead Travelling Crane (span 6.2m and lifting height 13.5 m Aprox)/ site requirement complete as per IS3177/is 807/bs2573/ equivalent including end girders, rail with run way beam, rail complete, panels in all respect as per dimension of the machine room.
All the operations through pendent Push Button station suspended from hoist panel IP 54 protection unbreakable PVC Molded. Cables: PVC sheathed flexible type multicore cu cable ISI marked tested at 11000 grade.
Hoist shall be duty painted with on coat of zinc metal primers and two coats of yellow enamel paint Safet features EMG ON/OFF
Limited switches for hoisting motion provided
Overload and motor protections provided
Brake protection provided.
Brake fails safe electromagnetic DC Disc type in Main Hoist Only
All motors are TEFC squirrel cage 40% CDF , 150 Starts per Hr., AC s4 crane, Class F insulation, Suitable for 415+-10%, 50Hz 3 phase The adjustment & maintenance of break shall be quick and simple. Test: The hoist supplied is to be tested at 25% overload and the test certificate of the same be provided at the time of installation. The complete unit as specified above is required to be fitted / tested at site.
Besides the above works the job Includes Providing and fitting 3-Core 6 sq. mm ,50 m or as per site submersible cable for providing power supply to motor of chain Hoist including P/F protection device of suitable capacity.
Job includes inspection of the same and all test certificate duly approved Job includes supply of heavy-duty lifting sling belts 3m long 3 MT capacity -4 nos
1
550000
550000
Supply of heavy duty hand Pallet 2.5 Ton capacity with PU wheels of reputed make.The said equipment is used for lifting/shifting of electromechanical gadgets in the scheme. The minimum fork height approx. 85 m and maximum fork height approx- 200 mm / as per design opproved.
Job includes supply of heavy duty lifting sling belts 3m long 3 MT capacity -4 nos
1
40000
40000
Illumination of Premises:
Providing and erection of 8 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
3) 3 Way Terminal Connector 20 Amp.
4) 3 No MCB 8 Amp.
The job includes fabrication, providing and fitting of three arm GI structure at the top having 120˚ angle between arms and each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2 mm copper wire from each terminal connector to each holding arm.
The pole is mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” (cost of concreting not included in the job) using 04 No anchor bolts of required size not less than 7” in length. The complete job includes earthing in GI Electrode.
1
27000
27000
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole vide
Having following specs:
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68.
The LED is properly fitted on the arm of the pole and connected to the copper as provided in the high mast pole.
1
9486
9486
Providing and installation of Junction Box with DP 32Amp MCB to serve as main switch for LED lighting including complete wiring min 20-30 m or as per site requirement up to control at machine room.
1
2227
2227
Providing, Installation and testing of 3KVA fully automatic voltage stabilizer with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit including all accessories required as per site location and site of installed is to be provided by site In-charge.
1
12500
12500
Providing & fitting of lighting points for ( machine room , operators room,) as per site requirement in 1.5 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit pipe by way, switches, socket modules , regulators ,indicators, 08/10/12 watt LED lamps Surface light Make. Included is cost on account of modular switch boards with the wooden frames as per site requirements
1
2000
2000
Providing fitting of heating points in 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit by way of p / f of 15 Amp switches, 6 pin socket on modular fitting as per site requirements. Heating points are to be connected from main control panel. All accessories required is to be provided by the firm
1
2500
2500
Providing and fitting of 9” x 9”exhaust fan with complete wiring in 1.5 mm cu wire through conduit and 6 A modular control complete job.
1
2500
2500
Providing and fitting of wall/ceiling fan ( as per site requirement) with complete wiring in 1.5 mm cu wire through conduit and 6 A modular control complete job.
1
4500
4500
Providing, fitting of Distribution Board of reputed make 4 way S P N single door powder coated sheet steel enclosure for surface mounting fitted with bus bar, DIN channel, neutral link and incoming contact. the above DB is to be provided /fitted with double pole 40 amp MCB for Main. 32 A for heating circuit & rest 3 of 16/6 amps each for premises luminary, auxiliary circuit of reputed make. Further job includes providing / fitting 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit as service line from main panel as per site requirements. Connections should be made in such a way Lighting points is to be connected via automatic transformer by way of p/f switch socket arrangement with allied fixtures & and heating points to main panel. Job includes dismantling of existing damaged conduit , wires, conduit and cleaning the surface properly
1
4500
4500
Earthing of substation- P/I of earthing station comprising of company fabricated earthing electrode. The job includes Auguring of bore of required dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards as per site requirement. Safe earthing electrode size : 80 mm dia (As specified), Length : as per latest relevant standard . Back fill compound as per requirement
1
10462
10462
Fabrication, providing, fitting of base frame for pumping units , covering of holes , fabrication of gantry, ladder door/window covering, gantry fabricated out of ISMC/ISMB/ISA/Bars/MS Pipe/MS plain/ chequered/MS Sheets/MS tubes. Including making of holes in concrete, including zinc metal primer 1 coat and two coats of approved shade . The works is to be executed as per site requirement and as per dimensions of Pumping unit and as per directions of site engineer
1
135
135
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. with 2-core 4 mm2 Cu ( 25 m) wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc of reputed make for proper fitment and installation of the item
1
34053
34053
Supply, installation of 6 kg CO2 type fire extinguisher with IS mark The co2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipment.
1
6447
6447
Providing, laying & fixing of shock proof rubber mats with adhesive/bonding material on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: -
Composition: Rubber (synthetic mats for electrical purpose)
Thickness: - 2.5mm Size: - 1M wide.
1
1205
1205
Providing of TOOL KIT For Maintenance: -
The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of :
Providing of tool kit consists of following items
i.Double ended Spanner (Chrome plated) 01 sets complete (12 Pcs)
ii.Double ended Ring spanners chrome plated 01 sets complete (12 Pcs)
iii.Allen key set black finish 01 sets complete
iv.Combination Pliers insulated with thick C.A sleeve; size in mm 165, 210, each – 01 No.
v.Long nose plier insulated with thick C.A sleeve; size in mm 165, 205 each – 01 No.
vi.Insulated screw Drivers with different blade(star/plate) and tip dimensions lengths 4 Nos
vii.Insulated screw driver set- 1 set
viii.Hammer with handle weight – 200-250 gm , 340-600 gm –each – 1No. .
ix.Heavy duty pipe Wrench length in mm - 200, 300, 600,500 each – 02 No.
x.Digital multimeter – 1No.
xi.Digital Clamp tester capable to measure up to 400A - 1 No.
xii.Hack saw frame with hack saw blade – 01 no.
xiii.S-16 MXL, S- 16 H X L Socket Set (19 sockets + 6 Accessories) – 01 No.
xiv.Heavy duty webbling sling belt of 5 MT capacity 3m-2 No, 5 m -2 NO
1
26000
26000
Providing of good quality bedding for night stay/Shift consisting of: -
i) Mattress with warm cover size 6'x3' (5-6Kg)- 02 No’s
ii) Quilt with warm cover size 5'x8' (5-6Kg)- 02 No’s
iii) Pillows with covers - 02 No’s iv) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
c)
The job also includes providing of pressure Hawkins cooker 5ltr 02 No’s, Steel patella (utensil) 5ltrs 02 No’s, cooking heater 01 No., room heater 01 No., steel buckets 10 litre capacity 01 No., samrudi Plastic bucket 10 litre capacity with Mug 02 No’s each, steel glasses 06 No’s, steel Plates with large spoons and bowls 03 No’s each, Cup and Saucer set (01 No. Set) and, 5kg Gas cylinder with burner/ stove. The job also includes providing of thermo-cool 180 sft along with excel matting of 180 sft (size as requirement). The job also includes providing of unbreakable Samrudi/Samrath Plastic Chair table set consisting of chairs 04 No’s, extra heavy Table 01 No. The job also includes providing of good quality safety Door locks (03 No’s) of Godrej, Link locks,
1
39619
39619
Fabrication of 6’ x 3’ x 2 No angle iron bed by way of providing and fitting of Structural steel in built up sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded
1
110
110
Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet, 2 no’s including cutting, fixing all complete including painting of the play sheet by one coat of primer and two coats of enamel paint
1
150
150
Providing of solar/electrical lantern chargeable on both solar & electrical 220v supply
1
2000
2000
Providing of bamboo ladder 18 feet long with 15 feet long link rods and HT gloves pair (01 each)
1
7350
7350
Providing of 1 KW heat convector for operators for winter season
1
1205
1205
Providing and laying in position cement concrete of specified grade including curing , the cost of centering and shuttering. All work upto plinth level 1:2:4 with stone aggregrate 20 mm nominal size. For foundatioin /concrete beds as per site requirement at all stages Job includes curing of concrete.
1
8500
8500
Sopore Town Clear Water Stage
-
-
-
ZONE 1
Providing, installation, testing and commissioning of vertical turbine pumping unit driven by Solid shaft motor for pumping water at an altitude of 1580 M (AMSL). The specification are as under :
“A” Pump:1. Discharge = 101 m3/h 2.Type = Self water lubricated, vertical turbine pump with delivery above floor level). 3.Liquid to be handled = design for Contaminated water having solids in suspension 4.RPM = 1485 5.Head = 70 Meters 6.Efficiency = 65% without negative tolerance 7.Material of Impeller = Semi enclosed open shrouded impellers mixed flow (Bronze grade V of BIS 318/SS) 8.Impeller dia = BR/SS as per design 9.Hydrotest PR = 23 kg/cm2 10.Material Solid shaft and Solid shaft coupling = Stainless steel AISI-410 11.Material of impeller shaft = Stainless steel AISI-410 12.Intermediate shaft = Stainless steel 24.Column pipe = Heavy duty Mild steel column pipe as per IS226/2062, 150mm nominal dia (lengths for each piece of columns should not exceed 1.524mm) i.e. to be fabricated in suitable pieces. Thickness of column pipe 8mm 13.Suction strainer = MS fabricated with anticorrosive protection 14.Bell mouth = CI 15.Pump Bowl = CI (pump bowls should be fastening through screws) 16.Size = 150 mm
17.Prime mover =as per design 18.Levels: Sump bed level = 1544.032 Meters
Machinery floor level = 1549.32 Meters Minimum water level = 1.5 Meters
Minimum submergence = 1.5 Meters Level is as per design of sump/cum pump house. Pump bowl to be designed with minimum number of stages. Final levels may vary and will be reflected on approved drawing before installation 19.Providing and fitting of Pressure Guage in the delivery side
"B" Motor 1.Type = Solid Shaft induction motor 2.Rating = 50 HP minimum
3.Frequency = 50 ± 3 % Hz 4.Working Voltage = 415 ± 15 V, 03 phase
5.RPM = 1485 (sync) 6.Efficiency = Not less than 80% 7.Class of insulation = F/H 8.Quantity = One Number 9.Make = ABB/Kirloskar
10.Bearings = Thrust bearing shall be suitable and of adequate capacity to carry the weight of all rotating parts and the hydraulic down thrust.
1
1150000
1150000
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class-C. The job includes providing and fitting of M.S Flanges ( The Thickness of flange shall conform to IS 6392 Part 1st Table-17) for Delivery main-fold and washout Size : 125 mm dia Class: C (Heavy)
Rest of Specification Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class B and C. The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make as per site requirement. Flanges The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint. Welding Electrode DC Arc Welding using welding electrode having diameter not less than 4mm. Nuts and Bolts Rubber Insertion Gaskets Job includes painting with zinc metal primer and Cutting of hot dip galvanized GI , C-Class pipe across the section by dint of pipe cutter/gas cutter. The job includes providing and welding of M.S. Flanges to the two ends of Pipe. The Thickness of flange shall conform to IS 6392 Part 1st Table-17 Dia: 125 mm Rest specifications Cutting of hot dip galvanized G.I, C-Class pipe across the section by dint of pipe cutter/ gas cutter. The job also includes Providing and welding of M.S flanges to the two ends of pipe.. The flange welding shall be carried out in double layers with electrodes to form strong welding joint by dint of arc welding. The job further includes Providing and Fitting of nuts and bolts and Rubber Insertion Gaskets to be used between flanged joints
1
1855
1855
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
Size: DN125 mm PN:1.6/16 Rest Specifications
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job
1
22321
22321
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. Size: 125 mm
PN: 1.6/16 Rest Specifications
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
1
26790
26790
Fabrication, Providing and fitting of flanged easy/long bends/elbow to delivery manifold/ suction and washout, including nuts and bolts and rubber gaskets as per requirement.
Dia : 125 mm
Rest of Specification:
Fabrication, providing and fitting class C MS pipe long /easy bend/elbow as per site requirement to be fabricated out of heavy class MS pipe, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
5142
5142
Fabrication, Providing and fitting of flanged Washout Tee, including nuts, bolts and gasket as per site requirement.
Dia = 125 mm Rest Specifications
Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each (Approx). The Tee shall be fabricated out of C class MS/GI pipe with M.S Flanges ( M.S Flanges conforming to BIS 6392/1997 Table 17 )fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
6138
6138
Fabrication, Providing and fitting of flanged Y- Junction, including nuts, bolts and gasket as per site requirement.
Dia = 125 mm
Rest Specifications
Fabrication, providing and fitting of Y-Junction with arm length 1 m each (Approx). The Tee shall be fabricated out of Heavy class-C MS/GI Pipe with M.S Flanges( M.S Flanges conforming to BIS 6392/1997 Table 17 ) fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
10000
10000
Fabrication ,Providing and fitting of flanged Enlarger MS Tail. To be fitted in delivery line after manifold with the rising main, including nuts and bolts and rubber gaskets as per requirement.
Dia : 125-150 mm
Rest of Specification:
Fabricated out of C Class GI/MS Pipe , 1 m min length or as per site requirement, flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
5500
5500
ZONE 4 Providing, installation, testing and commissioning of vertical turbine pumping unit driven by Solid shaft motor for pumping water at an altitude of 1580 M (AMSL). The specification are as under : “A” Pump: 1. Discharge = 101 m3/h 2.Type = Self water lubricated, vertical turbine pump with delivery above floor level). 3.Liquid to be handled = design for Contaminated water having solids in suspension 4.RPM = 1485 5.Head = 150 Meters 6.Efficiency = 65% without negative tolerance 7. Material of Impeller = Semi enclosed open shrouded impellers mixed flow (Bronze grade V of BIS 318/SS) 8.Impeller dia = BR/SS as per design 9.Hydrotest PR = 23 kg/cm2 10.Material Solid shaft and Solid shaft coupling = Stainless steel AISI-410 11.Material of impeller shaft = Stainless steel AISI-410 12.Intermediate shaft = Stainless steel 25.Column pipe = Heavy duty Mild steel column pipe as per IS226/2062, 150mm nominal dia (lengths for each piece of columns should not exceed 1.524mm) i.e. to be fabricated in suitable pieces. Thickness of column pipe 8mm 13. Suction strainer = MS fabricated with anticorrosive protection 14.Bell mouth = CI 15.Pump Bowl = CI (pump bowls should be fastening through screws) 16. Size = 150 mm 17.Prime mover =as per design18.Levels: Sump bed level = 1544.032 Meters Machinery floor level = 1549.32 Meters Minimum water level = 1.5 Meters Minimum submergence = 1.5 Meters Level is as per design of sump/cum pump house. Pump bowl to be designed with minimum number of stages. Final levels may vary and will be reflected on approved drawing before installation 19.Providing and fitting of Pressure Guage in the delivery side "B" Motor 1.Type = Solid Shaft induction motor 2.Rating = 100 HP minimum 3.Frequency = 50 ± 3 % Hz 4.Working Voltage = 415 ± 15 V, 03 phase 5.RPM = 1485 (sync) 6.Efficiency = Not less than 80% 7.Class of insulation = F/H8.Quantity = One Number 9.Make = ABB/Kirloskar 10. Bearings = Thrust bearing shall be suitable and of adequate capacity to carry the weight of all rotating parts and the hydraulic down thrust.
1
1450000
1450000
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class-C. The job includes providing and fitting of M.S Flanges ( The Thickness of flange shall conform to IS 6392 Part 1st Table-17) for Delivery main-fold and washout
Size : 125 mm dia
Class: C (Heavy)
Rest of Specification
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class B and C. The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make as per site requirement.
Flanges
The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint.
Welding Electrode
DC Arc Welding using welding electrode having diameter not less than 4mm.
Nuts and Bolts
Rubber Insertion Gaskets
Job includes painting with zinc metal primer and
1
2657
2657
Cutting of hot dip galvanized GI , C-Class pipe across the section by dint of pipe cutter/gas cutter. The job includes providing and welding of M.S. Flanges to the two ends of Pipe. The Thickness of flange shall conform to IS 6392 Part 1st Table-17
Dia: 125 mm
Rest specifications
Cutting of hot dip galvanized G.I, C-Class pipe across the section by dint of pipe cutter/ gas cutter. The job also includes Providing and welding of M.S flanges to the two ends of pipe.. The flange welding shall be carried out in double layers with electrodes to form strong welding joint by dint of arc welding. The job further includes Providing and Fitting of nuts and bolts and Rubber Insertion Gaskets to be used between flanged joints
1
1855
1855
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
Size: DN125 mm
PN:1.6/16
Rest Specifications
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job
1
22321
22321
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312.
Size: 125 mm
PN: 1.6/16
Rest Specifications
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
1
26790
26790
Fabrication, Providing and fitting of flanged easy/long bends/elbow to delivery manifold/ suction and washout, including nuts and bolts and rubber gaskets as per requirement.
Dia : 125 mm
Rest of Specification:
Fabrication, providing and fitting class C MS pipe long /easy bend/elbow as per site requirement to be fabricated out of heavy class MS pipe, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
5142
5142
Fabrication, Providing and fitting of flanged Washout Tee, including nuts, bolts and gasket as per site requirement.
Dia = 125 mm
Rest Specifications
Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each (Approx). The Tee shall be fabricated out of C class MS/GI pipe with M.S Flanges ( M.S Flanges conforming to BIS 6392/1997 Table 17 )fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
6138
6138
Fabrication, Providing and fitting of flanged Y- Junction, including nuts, bolts and gasket as per site requirement.
Dia = 125 mm
Rest Specifications
Fabrication, providing and fitting of Y-Junction with arm length 1 m each (Approx). The Tee shall be fabricated out of Heavy class-C MS/GI Pipe with M.S Flanges( M.S Flanges conforming to BIS 6392/1997 Table 17 ) fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
10000
10000
Fabrication ,Providing and fitting of flanged Enlarger MS Tail. To be fitted in delivery line after manifold with the rising main, including nuts and bolts and rubber gaskets as per requirement.
Dia : 125-150 mm Rest of Specification:
Fabricated out of C Class GI/MS Pipe , 1 m min length or as per site requirement, flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
5500
5500
ZONE 2 & 3 Providing, installation, testing and commissioning of vertical turbine pumping unit driven by Solid shaft motor for pumping water at an altitude of 1580 M (AMSL). The specification are as under :“A” Pump:1.Discharge = 125 m3/h 2.Type = Self water lubricated, vertical turbine pump with delivery above floor level). 3.Liquid to be handled = Design for Contaminated water having solids in suspension 4.RPM = 1485 5.Head = 60 Meters 6.Efficiency = 65% without negative tolerance 7.Material of Impeller = Semi enclosed open shrouded impellers mixed flow (Bronze grade V of BIS 318/SS) 8. Impeller dia = BR/SS as per design 9.Hydrotest PR = 23 kg/cm2 10.Material Solid shaft and Solid shaft coupling = Stainless steel AISI-410 11.Material of impeller shaft = Stainless steel AISI-410 12.Intermediate shaft = Stainless steel 26. Column pipe = Heavy duty Mild steel column pipe as per IS226/2062, 150mm nominal dia (lengths for each piece of columns should not exceed 1.524mm) i.e. to be fabricated in suitable pieces. Thickness of column pipe 8mm 13.Suction strainer = MS fabricated with anticorrosive protection 14.Bell mouth = CI 15.Pump Bowl = CI (pump bowls should be fastening through screws) 16. Size = 150 mm 17. Prime mover =as per design 18. Levels: Sump bed level = 1544.032 Meters
Machinery floor level = 1549.32 Meters Minimum water level = 1.5 Meters
Minimum submergence = 1.5 Meters Level is as per design of sump/cum pump house. Pump bowl to be designed with minimum number of stages. Final levels may vary and will be reflected on approved drawing before installation 19. Providing and fitting of Pressure Guage in the delivery side
"B" Motor 1. Type = Solid Shaft induction motor 2. Rating = 50 HP minimum 3. Frequency = 50 ± 3 % Hz 4.Working Voltage = 415 ± 15 V, 03 phase 5. RPM = 1485 (sync) 6. Efficiency = Not less than 80% 7.
Class of insulation = F/H 8.Quantity = One Number
1
1150000
1150000
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class-C. The job includes providing and fitting of M.S Flanges ( The Thickness of flange shall conform to IS 6392 Part 1st Table-17) for Delivery main-fold and washout
Size : 125 mm dia
Class: C (Heavy)
Rest of Specification
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class B and C. The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make as per site requirement.
Flanges
The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint.
Welding Electrode
DC Arc Welding using welding electrode having diameter not less than 4mm.
Nuts and Bolts
Rubber Insertion Gaskets
Job includes painting with zinc metal primer and
1
2657
2657
Cutting of hot dip galvanized GI , C-Class pipe across the section by dint of pipe cutter/gas cutter. The job includes providing and welding of M.S. Flanges to the two ends of Pipe. The Thickness of flange shall conform to IS 6392 Part 1st Table-17
Dia: 125 mm
Rest specifications
Cutting of hot dip galvanized G.I, C-Class pipe across the section by dint of pipe cutter/ gas cutter. The job also includes Providing and welding of M.S flanges to the two ends of pipe. The flange welding shall be carried out in double layers with electrodes to form strong welding joint by dint of arc welding. The job further includes Providing and Fitting of nuts and bolts and Rubber Insertion Gaskets to be used between flanged joints
1
1855
1855
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
Size: DN125 mm PN:1.6/16 Rest Specifications
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job
1
22321
22321
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312.
Size: 125 mm
PN: 1.6/16
Rest Specifications
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
1
26790
26790
Fabrication, Providing and fitting of flanged easy/long bends/elbow to delivery manifold/ suction and washout, including nuts and bolts and rubber gaskets as per requirement.
Dia : 125 mm Rest of Specification:
Fabrication, providing and fitting class C MS pipe long /easy bend/elbow as per site requirement to be fabricated out of heavy class MS pipe, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
5142
5142
Fabrication, Providing and fitting of flanged Washout Tee, including nuts, bolts and gasket as per site requirement.
Dia = 125 mm
Rest Specifications
Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each (Approx). The Tee shall be fabricated out of C class MS/GI pipe with M.S Flanges ( M.S Flanges conforming to BIS 6392/1997 Table 17 )fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
6138
6138
Fabrication, Providing and fitting of flanged Y- Junction, including nuts, bolts and gasket as per site requirement.
Dia = 125 mm
Rest Specifications
Fabrication, providing and fitting of Y-Junction with arm length 1 m each (Approx). The Tee shall be fabricated out of Heavy class-C MS/GI Pipe with M.S Flanges( M.S Flanges conforming to BIS 6392/1997 Table 17 ) fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
10000
10000
Fabrication ,Providing and fitting of flanged Enlarger MS Tail. To be fitted in delivery line after manifold with the rising main, including nuts and bolts and rubber gaskets as per requirement.
Dia : 125-200 mm Rest of Specification:
Fabricated out of C Class GI/MS Pipe , 1 m min length or as per site requirement, flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
6500
6500
Back Wash OHT Providing, installation, testing and commissioning of vertical turbine pumping unit driven by Solid shaft motor for pumping water at an altitude of 1580 M (AMSL). The specification are as under :“A” Pump: 1.Discharge = 44 m3/h 2.Type = Self water lubricated, vertical turbine pump with delivery above floor level).3.Liquid to be handled = Design for Contaminated water having solids in suspension 4.RPM = 1485 5.Head = 36 Meters 6. Efficiency = 65% without negative tolerance 7.Material of Impeller = Semi enclosed open shrouded impellers mixed flow (Bronze grade V of BIS 318/SS) 8. Impeller dia = BR/SS as per design 9. Hydrotest PR = 23 kg/cm2 10. Material Solid shaft and Solid shaft coupling = Stainless steel AISI-410 11.Material of impeller shaft = Stainless steel AISI-410 12. Intermediate shaft = Stainless steel 27. Column pipe = Heavy duty Mild steel column pipe as per IS226/2062, 150mm nominal dia (lengths for each piece of columns should not exceed 1.524mm) i.e. to be fabricated in suitable pieces. Thickness of column pipe 8mm 13. Suction strainer = MS fabricated with anticorrosive protection 14. Bell mouth = CI 15. Pump Bowl = CI (pump bowls should be fastening through screws) 16. Size = 150 mm 17.Prime mover =as per design 18. Levels: Sump bed level = 1544.032 Meters Machinery floor level = 1549.32 Meters Minimum water level = 1.5 Meters Minimum submergence = 1.5 Meters Level is as per design of sump/cum pump house. Pump bowl to be designed with minimum number of stages. Final levels may vary and will be reflected on approved drawing before installation 19. Providing and fitting of Pressure Guage in the delivery side "B" Motor 1. Type = Solid Shaft induction motor 2. Rating = 15 HP minimum 3. Frequency = 50 ± 3 % Hz 4. Working Voltage = 415 ± 15 V, 03 phase 5.RPM = 1485 (sync) 6. Efficiency = Not less than 80% 7.Class of insulation = F/H 8.Quantity = One Number 9. Make= ABB/Kirloskar 10. Bearings = Thrust bearing shall be suitable and of adequate capacity to carry the weight of all rotating parts and the hydraulic down thrust.11. Coupling set , Ratchet = Non-reversing ratchet or similar mechanism should be provided to the pump /motor to prevent reverse rotation.12. Continuous maximum rating = Continuous maximum rating of the motor shall be at least 20% above the maximum power absorbed by
the pump under any operating point within stipulated head range of the pump or at least 10% above the power required at shut-off, whichever is higher.
13.
Discharge Head: Discharge head shall be fabricated from MS. It shall be incorporated in full diameter elbow mounting flange for motor with suitable tapping for pressure gauge. The discharge head shall be of robust construction and shall be designed to support entire static and dynamic load of pump assembly, water column and motor. The discharge head shall have an arrow indicating direction of rotation of pump. The discharge head may have a stuffing box with renewable bushing. The location shall be easily accessible. The lantern ring and gland follower shall be split type. It shall incorporate suitable arrangement to collect gland leakage and lead to sump with suitable piping. The discharge head should have suitable size valve arrangement for air release
1
550000
550000
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class-C. The job includes providing and fitting of M.S Flanges ( The Thickness of flange shall conform to IS 6392 Part 1st Table-17) for Delivery main-fold and washout Size : 100 mm dia Class: C (Heavy)
Rest of Specification
Providing/supplying and fitting of G.I flanged Pipe at site. The Pipe shall be hot dip Galvanized, class B and C. The flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make as per site requirement.
Flanges
The Thickness of flange shall conform to IS 6392 Part 1st Table-17. The flange welding shall be carried out in double layers using reputed make electrodes to form strong welding joint.
Welding Electrode
DC Arc Welding using welding electrode having diameter not less than 4mm.
Nuts and Bolts
Rubber Insertion Gaskets
Job includes painting with zinc metal primer and
1
2189
2189
Cutting of hot dip galvanized GI , C-Class pipe across the section by dint of pipe cutter/gas cutter. The job includes providing and welding of M.S. Flanges to the two ends of Pipe. The Thickness of flange shall conform to IS 6392 Part 1st Table-17
Dia: 100 mm
Rest specifications
Cutting of hot dip galvanized G.I, C-Class pipe across the section by dint of pipe cutter/ gas cutter. The job also includes Providing and welding of M.S flanges to the two ends of pipe. The flange welding shall be carried out in double layers with electrodes to form strong welding joint by dint of arc welding. The job further includes Providing and Fitting of nuts and bolts and Rubber Insertion Gaskets to be used between flanged joints
1
1544
1544
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
Size: DN100 mmPN:1.6/16
Rest Specifications
Providing and fitting of, Ductile Iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per IS14846 for regulating the water supply outside the pumping units .
The body and bonnet of the valve shall be of ductile iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. The Gate/Sluice valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating(approved for drinking water) both inside and outside of the valve. The valve shall be supplied along with hand wheel.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job
1
19094
19094
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312.
Size: 100 mm
PN: 1.6/16
Rest Specifications
Providing and fitting of Ductile Iron double flanged, Slanted seat swing check valve (NRV) as per IS 5312. The body shall be of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water). The valve shall be compatible for buried applications and shall be safe to install in both horizontal and vertical positions.
It shall have electrostatic epoxy coating (approved for drinking water) both inside and outside of the valve.
Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
The job includes providing and fitting of 02 nos. M.S flanges (Table flanges) perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with Rising main of the pumping unit at appropriate spots as per site requirement. The job includes the cost on account of P/F of nuts, bolts and gasket required for the job.
1
20581
20581
Fabrication, Providing and fitting of flanged easy/long bends/elbow to delivery manifold/ suction and washout, including nuts and bolts and rubber gaskets as per requirement.
Dia : 100 mm
Rest of Specification:
Fabrication, providing and fitting class C MS pipe long /easy bend/elbow as per site requirement to be fabricated out of heavy class MS pipe, 1 m length and flanged on both ends to make it leak proof. The flanges if required as per site requirement shall be M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and double layer welded on both sides. The job includes nuts, bolts, gaskets etc as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
3614
3614
Fabrication, Providing and fitting of flanged Washout Tee, including nuts, bolts and gasket as per site requirement.
Dia = 100 mm
Rest Specifications
Fabrication, providing and fitting of washout Tee with arm length 1.2 feet each (Approx). The Tee shall be fabricated out of C class MS/GI pipe with M.S Flanges ( M.S Flanges conforming to BIS 6392/1997 Table 17 )fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
5122
5122
Fabrication, Providing and fitting of flanged Y- Junction, including nuts, bolts and gasket as per site requirement.
Dia = 100 mm
Rest Specifications
Fabrication, providing and fitting of Y-Junction with arm length 1 m each (Approx). The Tee shall be fabricated out of Heavy class-C MS/GI Pipe with M.S Flanges( M.S Flanges conforming to BIS 6392/1997 Table 17 ) fastened with weld joints on three ends. The size of the Tee should be as per site requirement. The job also includes painting one coat of zinc metal primer and two coats of enamel paint of approved shade.
1
9500
9500
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
Make = Reputed make globe
Capacity = 3 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
1
62972
62972
Providing, installation and testing of manual type triple spur gear chain pulley block along with monorail geared travelling trolley having following features
Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears.
Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
Make = Reputed make globe
Capacity = 2 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
1
44473
44473
Supply, Installation, commissioning and testing of 3 Ton Capacity Electrically operated overhead Travelling Crane (span 6.2m and lifting height 13.5 m Aprox)/ site requirement complete as per IS3177/is 807/bs2573/ equivalent including end girders, rail with run way beam, rail complete, panels in all respect as per dimension of the machine room to be used for all machinery installed in the machine room All the operations through pendent Push Button station suspended from hoist panel IP 54 protection unbreakable PVC Molded. Cables: PVC sheathed flexible type multicore cu cable ISI marked tested at 11000 grade.
Hoist shall be duty painted with on coat of zinc metal primers and two coats of yellow enamel paint Safet features EMG ON/OFF
Limited switches for hoisting motion provided Overload and motor protections provided Brake protection provided.
Brake fails safe electromagnetic DC Disc type in Main Hoist Only
All motors are TEFC squirrel cage 40% CDF , 150 Starts per Hr., AC s4 crane, Class F insulation, Suitable for 415+-10%, 50Hz 3 phase The adjustment & maintenance of break shall be quick and simple. Test: The hoist supplied is to be tested at 25% overload and the test certificate of the same be provided at the time of installation. The complete unit as specified above is required to be fitted / tested at site. Besides the above works the job Includes Providing and fitting 3-Core 6 sq. mm ,50 m or as per site submersible cable for providing power supply to motor of chain Hoist including P/F protection device of suitable capacity.
Job includes inspection of the same and all test certificate duly approved Job includes supply of heavy-duty lifting sling belts 3m long 3 MT capacity -4 nos
1
684288
684288
Supply of heavy duty hand Pallet 2.5 Ton capacity with PU wheels of reputed make.The said equipment is used for lifting/shifting of electromechanical gadgets in the scheme. The minimum fork height approx. 85 m and maximum fork height approx- 200 mm / as per design opproved.
Job includes supply of heavy duty lifting sling belts 3m long 3 MT capacity -4 nos
1
40000
40000
Fabrication, providing, fitting of base frame for pumping units , covering of holes , fabrication of gantry, ladder door/window covering, gantry fabricated out of ISMC/ISMB/ISA/Bars/MS Pipe/MS plain/ chequered/MS Sheets/MS tubes. Including making of holes in concrete, including zinc metal primer 1 coat and two coats of approved shade . The works is to be executed as per site requirement and as per dimensions of Pumping unit and as per directions of site engineer
1
135
135
Electrical works for Clear Water Stage WS Sopore Town
-
-
-
Providing, installation, testing of power service cable for working voltage up to and including 1100 volts; armored aluminum 3.5 core cable as service line from output terminals of HT/LT transformer to cubical panel to main Panel. Cost includes laying of cable in trenches in PVC conduit/Pipe where ever necessary, it is to be laid underground or on cable tray to be fabricated in MS(ISA/Pipe)as per site requirement included is termination of ends with suitable Aluminum tube terminals dully crimpled & taped
Size : 500 sq mm
1
2800
2800
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting motors from panel , stabilizers in rubber conduit . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
For motors (Zone 4)
Size: 95 sq mm
1
1480
1480
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting motors from panel , stabilizers in rubber conduit . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
For motors( Zone 1 and Zone 2&3)
Size: 50 sq mm
1
780
780
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting motors from panel , stabilizers in rubber conduit . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
For Back wash OHT motor
Size: 35 sq mm
1
546
546
Design, manufacturing, providing, fitting, testing & commissioning of Main control Panel.
The control gear Panel shall be fabricated out of 14 SWG CRCA Sheets Modular, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 55 protection) with TP Copper Buses as per load , complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below: Rated Voltage of the Panel ----- 440 Volts
Frequency ----- 50 HZ No of Phases ----- Three
Enclosure Details ----- Free Standing, Floor mounted,
Compartmentalized Design. Material ----- CRS Thickness of sheet steel used ----- 02mm Application ----- Indoor
Cable Entry ----- Bottom Painting ----- Shade Siemens grey.
a) Mian Circuit Breaker incoming combined
Type ----- 4 pole Draw Out ACB Rating : 800 A
Qty -----1 No. of poles ----- 4 Rated operational voltage----- 415 V AC ± 15% Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking cap at (415 volt A C , 50 Hz ) ----- 50kA
b) Distribution bus bar Type -----Electric grade Cu with red, blue & yellow tapings of adequate section. Rating ----- 800 Amp
d) Circuit Breaker units Type ----- MCCB Qty ----- 4 No
No. of poles------4 Rated current -----500 Amp Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking capacity at (415 volt A C , 50 Hz ) -----50kA
e) Circuit Breaker units Type ----- MCCB Qty ----- 2 No
No. of poles------4 Rated current -----300 Amp Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking capacity at (415 volt A C , 50 Hz ) -----50kA
1
750000
750000
f) Circuit Breaker units Type ----- MCCB Qty ----- 2 No
No. of poles------4 Rated current -----160 Amp
Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking capacity at (415 volt A C , 50 Hz ) -----50kA
g) Circuit Breaker units Type ----- MCCB Qty ----- 4 No
No. of poles------4 Rated current -----100 Amp Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz
Ultimate S.C Breaking capacity at (415 volt A C , 50 Hz ) -----50kA
h) Circuit Breaker units Type ----- MCCB Qty ----- 4 No
No. of poles------4 Rated current -----32 Amp Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking capacity at (415 volt A C , 50 Hz ) -----50kA e) Aux. panel
Circuit breaker---MCCB Rated current : 160 A Qnty---02 no.
No. of poles---04 Rated operational Voltage---415+15%
Ultimate S.C. Breaking Capacity---35 KA at (415AC,50 Hz)
f) Auxiliary Protection Earth Fault Relay -----3 phase Earth fault, ground fault module Range as per requirement MCB ----- MCB SP , 10A (10 Ka) g) Metering Details: •Incomers (Panel Mounted)
(a) Multi-Function Meters LCD Display (1 No)
Voltage of each phase , Current of each phase
3ø power (Active, Apparent) , 3ø Power factor Frequency , Energy
(b) Analog voltmeter S/S operated (3 No) – three for input .
Digital Ammeters for each Frequency Meter-2
Pilot lampsEach outgoing with S/S CT operated
Drawing is to be got approved before installation
Note: Name of Scheme ; Allotment No ; should be imprinted on the machine with capital letters
1
2566
2566
Providing & Fitting of Single Core Copper Conductor (Flexible) PVC Insulated Heavy Duty Industrial Cables (Unsheathed), 1100 Volts Conforming to IS: 694- for connecting panel , stabilizers, in rubber conduit/PVC pipes/GI 8” cable tray (as per site requirement) dulty fitted on the wall with heavy duty clamps/ISA frames as per site requirement . The job includes providing and fitting of suitable rating copper thimbles duly crimped and taped at conductor ends by hydraulic crimping tool. The job includes earth work in excavation wherever required for laying of cable underground.
Size: 240 sq mm
1
3800
3800
Providing, fitting, testing and commissioning of voltage stabilizer as per specifications below: Capacity : 400 KvA Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi step. Type of Regulator : Double plate type 18”x18” with electrolytic copper contacts. Input voltage : 250-400 volts.(3 phase) Output voltage : 400 ±10% volts. Frequency : 50 ±3 C/S. Windings : Electrolytic grade copper of adequate section, vacuum impregnated and Oven-dried. Insulation : Fiber glass insulations to tested parameters. Cooling : Naturally, Oil cooled
Temp. Rise (Max) : 30°C above ambient Mounting : On Uni-directional wheels. Correction rate : 30 volts per step Wave form distortion : virtually nil Duty cycle : 100% continuous. Enclosure : MS sheet 5 mm thickness enclosure in pressed CGR Sheet powder coated with radiators.
Core laminates : High grade, low eddy loss, grain oriented silicon steel laminations. Load : Three phase induction motor load. Load Amperes (continuous) Fitted with heavy duty wheels Fins for cooling of T-oil.
Overload in 24-hours operation: 10% above continuous Ampere rating.
The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers Digital voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s). Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level, with dielectric strength of 5 KV at 4m air gap. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped test certificate and shall have name plate with specifications Minimum weigh of the cupper wire used for coils and connections=195 Kgs Aprox, Minimum weight of the core 450 Kgs approx. Minimum T-oil to be filled 500 ltrs AproxInspection of the material is to be done by the concerned Site Engineer at the time of manufacturing and approved
1
500000
500000
Design, manufacturing , providing , fitting, testing & commissioning of Star-delta Motor control gear Panel.The Star-delta Motor control gear Panel shall be fabricated out of 14 SWG CRCA Sheets Modular, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 55 protection) with TP Copper Buses as per load , complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below:Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three Enclosure Details ----- Free Standing, Floor mounted,Compartmentalized Design.Material ----- CRS
Thickness of sheet steel used ----- 02mm Application ----- Indoor
Cable Entry ----- Bottom Painting ----- Shade Siemens grey. a) Mian Circuit Breaker incoming combined Type ----- On load 4 pole MCCB Rating : 400 A Qty ----- 1 Nos No. of poles ----- 4 Rated operational voltage----- 415 V AC ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking cap at (415 volt A C , 50 Hz ) ----- 50kA b) Distribution bus bar Type -----Electric grade Cu with red, blue & yellow tapings of adequate section. Rating ----- 400 Amp c) Change over Switch For phase reversal
Qty ----- One Type ----- Front Operated on load 4 pole (open execution) Rating -----400 Amp d) Circuit Breaker units for Zone 1 and zone 2&3
Type ----- MCCB Qty ----- 4 Nos No. of poles------3 Rated current -----200 Amp Thermal release range- Rated operational voltage----- 415 V ± 15%
Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking capacity at (415 volt A C , 50 Hz ) -----50kA e) Circuit Breaker units for back wash motor Type ----- MCCB Qty ----- 2 Nos No. of poles------3 Rated current -----100 Amp Thermal release range- Rated operational voltage----- 415 V ± 15% Rated frequency ----- 50 ± 3% Hz Ultimate S.C Breaking capacity
at (415 volt A C , 50 Hz ) -----50kA e) Starters (FASD) for Zone 1 and Zone 2&3 Power Specification -----3 phase, 415 ± 15% v & 50 Hz Contactors : Line Contactor ----- AC3 110 A Delta Contactor --- AC3 110 A
Star Contactor ----- AC3 95 A Timer ----- Star Delta Electronic
Thermal overload relay – direct/CT operated Suitable/available range Single phase preventer Coil Voltage : 220/240V Qty ----- 4 No’s f) Starters (FASD) for Backwash motor Power Specification -----3 phase, 415 ± 15% v & 50 Hz Contactors : Line Contactor ----- AC3 70 A Delta Contactor --- AC3 70 A Star Contactor ----- AC3 50 A Timer ----- Star Delta Electronic Thermal overload relay – direct/CT operated Suitable/available range Single phase preventer Coil Voltage : 220/240V Qty ----- 2 No’s g) Separate Stabilization unit for each starters
Qnty: for all starter units Rating---- as per requirement Out Put : ( as per coil voltage of contractors) controlled with MCB 6A Enclosure--- to be housed within the cubical panel Controlled with MCB DP ---6 A----1nos h) Protection Details: for each starter units Compact Motor Protection Relay including other related accessories like single phase preventer relay, timer relay , overload-under load, phase difference etc.with measuring parameters Display ----- Panel Mounted LED/LCD and all setting is to be done at display Compact motor protection relay Qnty :for all starter units Protections : • Over voltage protection ( settable) • Under Voltage Protection (Settable) • Over Load Protection (Settable) • Under Load Protection (Settable) • Unbalance Voltage and current (Settable) • Over frequency/ under frequency (Settable) • Phase Failure Protection (Settable) j) Water level control relay for including wiring and capsules required at site keeping depth of sump 10 meters in consideration: for each starter units complete g) Metering Details: • Incomers (Panel Mounted)
(a) Multi-Function Meters LCD Display (1 No) Voltage of each phase , Current of each phase 3ø power (Active, Apparent) , 3ø Power factor Frequency , Energy (b) Analog/Digital voltmeter S/S operated. •(b) Outgoing (Analog/Digital voltmeter (0-500) S/S operated
Digital Ammeters Requirement Amp for each starter units
Each outgoing with S/S CT operated
Note : Drawing of the panel is to be got approved before installation. Cost includes splitting of the panel into parts as per site requirement and making of connections from bus bar of one part to another in approved dia of cu wire.
Note: Name of Scheme ; Allotment No ; should be imprinted on the machine with capital letters
1
750000
750000
Scope: Design, manufacturing, providing, fitting, testing & commissioning of Star-delta ATS type Motor control gear Panel
The Star-delta Motor control gear Panel shall be fabricated out of 2 mm CRCA Sheets Modular, powder coated, compartmentalized, Free Standing, Floor Mounting, Front hinged doors for indoor use, removable bottom gland plates for incoming cables, dust and vermin proof (IP: 42 protection) with TP copper Buses, complete with connection, internal wiring, neon indicators for each phase ,starter buttons, name plates, painting ,vents etc. generally as per details furnished below:
Rated Voltage of the Panel ----- 440 Volts Frequency ----- 50 HZ No of Phases ----- Three Enclosure Details ----- Free Standing, Floor mounted,
Compartmentalized Design. Material ----- CRS Thickness of sheet steel used ----- 02mm Application ----- Indoor Cable Entry ----- Bottom
Painting ----- Shade Siemens grey. Size: width should not exceed 36 inches.
Distribution bus bar Type -----Electric grade CU with red, blue & yellow tapings Rating----- 600 Amp Make --------L & T / Schneider Starters (FASD) Power Specification -----3 phase, 415 ± 15% v & 50 Hz
Contactors : Type LC1 FDP AC type coil series) Line Contactor ----- AC3 500 A Delta Contactor --- AC3 400 A Star Contactor ----- AC3 400 A
Contactor Make = TC / Schneider Timer ----- Heavy Duty as per Star Delta Electronic (Schneider/L&T) Overload relay – Heavy Duty as per design (Schneider/L&T) Coil Voltage : 220/240V Single Phase Preventer:
Allied accessories as per design. Qty ----- 1 No’s ATS Coil in separate enclosure width should exceed 36 inches (Detachable) ATS Coil Rating : 300 HP ATS Coil should be fabricated out of copper strips (minimum weight of each leg without Core minimum 18 kgs) Enclosure : Modular CRG Sheet, powder coated fitted back side of panel on nuts and bolts.
T-Oil :Filled with T-Oil of proper grade . Connections : PVC Insulated heavy duty Cu wire duly thimbled Qnty---01 no Power factor correction panel in separate enclosure fitted on top of the panel with should not exceed 36 inches ( Detachable) Voltage Input : 280-460 V Frequency : 50 +- 5% c/s
Ambient temperature: -10 C0 to 40 C0 Motor Rating : 150/180 HP
Load Current : 200 to 250 A Available Power Factor : 0.7 to 0.8
Target power factor : 0.98 lead Switching time delay On Delay: 0-60 sec
Off delay : 1-60 seconds Control Type: ninary /intelligent CT ratio programming: to be provided Programming link: to be provided
Auto scroll : to be provided Manual Operation: to be provided Display parameters : PF,KW,VOLT,AMP Relay Contacts: As per requiremnt
Dimentions: width not more than 32 inches ( size should be compact and to be installed to top of the panel) Bezel/panel cut out : adequate
System protection :IP55 Enclosure : Modular CRG Sheet, Powder coated
Stabilization unit Qnty---01 no Rating---- 1 KvA single phase automatic voltage stabilizer Input :90V-300 Out Put : 220/240 ( as per coil voltage of contractors) Enclosure--- to be housed within the cubical panel in separated chamber with additional meter , LED fitted outer side
Make : V-guard, microtec, luminious MCB DP ---10A----1nos
Protection Details:Motor Protection Relay including other related accessories like Heavy Duty single phase preventer relay, Heavy Duty timer relay with allied accessories for ATS Starter & APFC Panel as per design.
Display ----- LED/LCD Compact motor protection relay Qnty :01 nos)
Make : L&T/ Schneider Protections :• Flush Mounting with display
• Last trip data recording • Protections: - Thermal Overload with pre- alarm
- Short Circuit - Earth fault - Phase loss, Unbalance, Phase reversal
- Under Current - Prolong starting, Locked Rotor. -Single phase protection- Single Phasing condition- Phase Reversal condition- Phase Unbalance condition-Modes of Operation Metering Details:
(a) Multi-Function Meters LCD Display (1 No) Voltage of each phase , Current of each phase 3ø power (Active, Apparent) , 3ø Power factor
Frequency , Energy Make : Rishab (a) Analog voltmeter S/S operated (3 No) for each pahase - Rishabh make.(b) Analog Ampere meter CT operated (01) No with selector switch- rishab make.
Note:Name of Scheme ; Allotment No ; should be imprinted on the panel with capital letters
1
500000
500000
Illumination of Premises:
Providing and erection of 8 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
7) 3 Way Terminal Connector 20 Amp.
8) 3 No MCB 8 Amp.
The job includes fabrication, providing and fitting of three arm GI structure at the top having 120˚ angle between arms and each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2 mm copper wire from each terminal connector to each holding arm.
The pole is mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” (cost of concreting not included in the job) using 04 No anchor bolts of required size not less than 7” in length. The complete job includes earthing in GI Electrode.
1
27000
27000
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole vide
Having following specs:
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminum housing with power coated finish and having Ingress Protection up to IP-68.
The LED is properly fitted on the arm of the pole and connected to the copper as provided in the high mast pole.
On wall it to be connected from distribution box through wire and control by 6 A MCB in PVC conduit pipe including angle for holding lamp
1
9486
9486
Providing and installation of Junction Box with DP 32Amp MCB to serve as main switch for LED lighting including complete wiring min 20-30 m or as per site requirement up to control at machine room.
1
2227
2227
Providing, Installation and testing of 3KVA fully automatic voltage stabilizer with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit including all accessories required as per site location and site of installed is to be provided by site In-charge.
1
12500
12500
Providing & fitting of lighting points for ( machine room , operators room,) as per site requirement in 1.5 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit pipe by way, switches, socket modules , regulators ,indicators, 08/10/12 watt LED lamps Surface light Make. Included is cost on account of modular switch boards with the wooden frames as per site requirements
1
2000
2000
Providing fitting of heating points in 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit by way of p / f of 15 Amp switches, 6 pin socket on modular fitting as per site requirements. Heating points are to be connected from main control panel. All accessories required is to be provided by the firm
1
2500
2500
Providing and fitting of 9” x 9”exhaust fan with complete wiring in 1.5 mm cu wire through conduit and 6 A modular control complete job.
1
2500
2500
Providing and fitting of wall/ceiling fan ( as per site requirement) with complete wiring in 1.5 mm cu wire through conduit and 6 A modular control complete job.
1
4500
4500
Providing, fitting of Distribution Board of reputed make 4 way S P N single door powder coated sheet steel enclosure for surface mounting fitted with bus bar, DIN channel, neutral link and incoming contact. the above DB is to be provided /fitted with double pole 40 amp MCB for Main. 32 A for heating circuit & rest 3 of 16/6 amps each for premises luminary, auxiliary circuit of reputed make. Further job includes providing / fitting 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit as service line from main panel as per site requirements. Connections should be made in such a way Lighting points is to be connected via automatic transformer by way of p/f switch socket arrangement with allied fixtures & and heating points to main panel. Job includes dismantling of existing damaged conduit , wires, conduit and cleaning the surface properly
1
4500
4500
Earthing of substation- P/I of earthing station comprising of company fabricated earthing electrode. The job includes Auguring of bore of required dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards as per site requirement. Safe earthing electrode size : 80 mm dia (As specified), Length : as per latest relevant standard . Back fill compound as per requirement
1
10462
10462
Fabrication, providing, fitting of base frame for pumping units , covering of holes , fabrication of gantry, ladder door/window covering, gantry fabricated out of ISMC/ISMB/ISA/Bars/MS Pipe/MS plain/ chequered/MS Sheets/MS tubes. Including making of holes in concrete, including zinc metal primer 1 coat and two coats of approved shade . The works is to be executed as per site requirement and as per dimensions of Pumping unit and as per directions of site engineer
1
135
135
Painting on steel structure/pipe/ wall with synthetic enamel paint/emulsion of approved brand and maufacturer of required colour to give an even shade on new work( Two or more coats) including a coat of approved steel/oil/cement primer but excluding a coat of mordant solution At all stages (watlab/sopore town )
1
150
150
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. with 2-core 4 mm2 Cu ( 25 m) wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc of reputed make for proper fitment and installation of the item
1
34053
34053
Supply, installation of 6 kg CO2 type fire extinguisher with IS mark The co2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipment.
1
6447
6447
Providing, laying & fixing of shock proof rubber mats with adhesive/bonding material on the floor of the pump house, covering area around electro-mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. The mats shall be as per IS 15652:2006 & shall have the following specifications: -
Composition: Rubber (synthetic mats for electrical purpose)
Thickness: - 2.5mm Size: - 1M wide.
1
1205
1205
Providing of TOOL KIT For Maintenance: -
The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of :
Providing of tool kit consists of following items
i.Double ended Spanner (Chrome plated) 01 sets complete (12 Pcs)
ii.Double ended Ring spanners chrome plated 01 sets complete (12 Pcs)
iii.Allen key set black finish 01 sets complete
iv.Combination Pliers insulated with thick C.A sleeve; size in mm 165, 210, each – 01 No.
v.Long nose plier insulated with thick C.A sleeve; size in mm 165, 205 each – 01 No.
vi.Insulated screw Drivers with different blade(star/plate) and tip dimensions lengths 4 Nos
vii.Insulated screw driver set- 1 set
viii.Hammer with handle weight – 200-250 gm , 340-600 gm –each – 1No. .
ix.Heavy duty pipe Wrench length in mm - 200, 300, 600,500 each – 02 No.
x.Digital multimeter – 1No.
xi.Digital Clamp tester capable to measure up to 400A - 1 No.
xii.Hack saw frame with hack saw blade – 01 no.
xiii.S-16 MXL, S- 16 H X L Socket Set (19 sockets + 6 Accessories) – 01 No.
xiv.Heavy duty webbling sling belt of 5 MT capacity 3m-2 No, 5 m -2 NO
xv.Potable invertor arc welding machine (IgbT protected)with all accessories cable and clamp, and 10 electrode boxes
1
40000
40000
Providing of good quality bedding for night stay/Shift consisting of: -
i) Mattress with warm cover size 6'x3' (5-6Kg)- 02 No’s
ii) Quilt with warm cover size 5'x8' (5-6Kg)- 02 No’s
iii) Pillows with covers - 02 No’s
iv) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
e)
The job also includes providing of pressure Hawkins cooker 5ltr 02 No’s, Steel patella (utensil) 5ltrs 02 No’s, cooking heater 01 No., room heater 01 No., steel buckets 10 litre capacity 01 No., samrudi Plastic bucket 10 litre capacity with Mug 02 No’s each, steel glasses 06 No’s, steel Plates with large spoons and bowls 03 No’s each, Cup and Saucer set (01 No. Set) and, 5kg Gas cylinder with burner/ stove. The job also includes providing of thermo-cool 180 sft along with excel matting of 180 sft (size as requirement). The job also includes providing of unbreakable Samrudi/Samrath Plastic Chair table set consisting of chairs 04 No’s, extra heavy Table 01 No. The job also includes providing of good quality safety Door locks (03 No’s) of Godrej, Link locks,
1
39619
39619
Fabrication of 6’ x 3’ x 2 No angle iron bed by way of providing and fitting of Structural steel in built up sections and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete welded
1
110
110
Providing and fitting of 19 mm thick multilayered ply sheet of size 6 x 3 feet, 2 no’s including cutting, fixing all complete including painting of the play sheet by one coat of primer and two coats of enamel paint
1
150
150
Providing of solar/electrical lantern chargeable on both solar & electrical 220v supply
1
2000
2000
Providing of bamboo ladder 18 feet long with 15 feet long link rods and HT gloves pair (01 each)
1
7350
7350
Providing of 1 KW heat convector for operators for winter season
1
1205
1205
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%