Back
  1. Home/
  2. Indian Tenders/
  3. Jammu & Kashmir Tenders/
  4. Public Health Engineering Department/
  5. Overview

Public Health Engineering Department Tender

... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.

Public Health Engineering Department - PHED Tender

Machinery and Tools
Eprocure
Srinagar, Jammu & Kashmir
Opening Date12 Jul 2022
Closing Date15 Jul 2022
Tender Amount₹ 12,00,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Request Call Back

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 10HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 12.5HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 15HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 17.5HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 20HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 25HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 30HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 35HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 40HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 45HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 50HP Oil-Type open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop.The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Mechanical seal complete assembly.

1

-

-

... More
Fresh Oil as per standard.

1

-

-

... More
Providing and fitting of new bearings suitable for above rated motor

1

-

-

... More
Repairs to 7.5HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 10HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 12.5HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 15HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 17.5HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 20HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 25HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 30HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 40HP water Cooled open well submersible Motor Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting, lowering of pumping unit in the well/sump and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap@ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per pumping unit after extracting the old damaged ones by suitable tools and tackles, skilled technical manpower etc. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap.

1

-

-

... More
Repairs to 3-Phase 5HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 7.5HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 10HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 12.5HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 15HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 17.5HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 20HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 25HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 30HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 35HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 40HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 45HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 50HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 60HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 75HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 85HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3-Phase 100HP Submersible Motor. Dismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the material from site to workshop and back after repairs. At site the motor shall be recoupled with the pump all power connections shall be reconnected with the motor and pump motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new Rubber Washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Rewinding by using PVC Insulated Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, tape, Skilled labour, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

1

-

-

... More
Replacement of motor shaft (Machined/Finished) which includes rebate on account of damaged shaft.

1

-

-

... More
Repairs to damaged or broken Rotor shaft by way tapping/internal threading, welding/remetalling, Stud bolts, machining etc.

1

-

-

... More
Providing and fitting of new Ratchet racer assembly complete of standard/reputed make as per requirement of pumping unit after extracting the old damaged one by suitable tools and tackles. The job shall include rebate on account of old damaged item.

1

-

-

... More
Fabrication, providing, inserting & fitting of new bronze/gun metal bushes and rubber bushes (02 No’s each) in the lower and upper manifolds of the Submersible motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, making the inner surfaces of the manifolds good by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bushes, before being fixed into the manifolds. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap

1

-

-

... More
Replacement of Water seal as per requirement.

1

-

-

... More
Replacement of Sand guard as per requirement.

1

-

-

... More
Repairs to 3'' Submersible Pump Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the pump from site to workshop and back after repairs. At site the pump shall be recoupled with the motor all power connections shall be reconnected with the pump and motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new rubber washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Replacement of impeller

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Diffuser

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Pump Bowl

1

-

-

... More
Fabrication, providing and fitting of Pump Shaft

1

-

-

... More
Replacement of cast iron non return valve

1

-

-

... More
Replacement of Stainless-steel strainers

1

-

-

... More
Replacement of cast iron threaded discharge outlet

1

-

-

... More
Replacement of bowl stage bushes for fitment of impellers

1

-

-

... More
GM/Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Nitryl rubber

1

-

-

... More
Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side with length 600mm as per site requirement (with thickness of pipe and flange as per sample

1

-

-

... More
50 mm Dia

1

-

-

... More
65 mm Dia

1

-

-

... More
80 mm Dia

1

-

-

... More
100 mm Dia

1

-

-

... More
Fabrication, providing and fitting of locking arrangement

1

-

-

... More
Replacement of GM Wear ring (Machined/Finished) as per sample

1

-

-

... More
Replacement of GM Neck ring (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Repairs to 4'' Submersible Pump Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the pump from site to workshop and back after repairs. At site the pump shall be recoupled with the motor all power connections shall be reconnected with the pump and motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new rubber washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Replacement of impeller

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Diffuser

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Pump Bowl

1

-

-

... More
Fabrication, providing and fitting of Pump Shaft

1

-

-

... More
Replacement of cast iron non return valve

1

-

-

... More
Replacement of Stainless-steel strainers

1

-

-

... More
Replacement of cast iron threaded discharge outlet

1

-

-

... More
Replacement of bowl stage bushes for fitment of impellers

1

-

-

... More
GM/Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Nitryl rubber

1

-

-

... More
Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side with length 600mm as per site requirement (with thickness of pipe and flange as per sample

1

-

-

... More
50 mm Dia

1

-

-

... More
65 mm Dia

1

-

-

... More
80 mm Dia

1

-

-

... More
100 mm Dia

1

-

-

... More
Fabrication, providing and fitting of locking arrangement

1

-

-

... More
Replacement of GM Wear ring (Machined/Finished) as per sample

1

-

-

... More
Replacement of GM Neck ring (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Repairs to 5'' Submersible Pump Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the pump from site to workshop and back after repairs. At site the pump shall be recoupled with the motor all power connections shall be reconnected with the pump and motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new rubber washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Replacement of impeller

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Diffuser

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Pump Bowl

1

-

-

... More
Fabrication, providing and fitting of Pump Shaft

1

-

-

... More
Replacement of cast iron non return valve

1

-

-

... More
Replacement of Stainless-steel strainers

1

-

-

... More
Replacement of cast iron threaded discharge outlet

1

-

-

... More
Replacement of bowl stage bushes for fitment of impellers

1

-

-

... More
GM/Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Nitryl rubber

1

-

-

... More
Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side with length 600mm as per site requirement (with thickness of pipe and flange as per sample

1

-

-

... More
50 mm Dia

1

-

-

... More
65 mm Dia

1

-

-

... More
80 mm Dia

1

-

-

... More
100 mm Dia

1

-

-

... More
Fabrication, providing and fitting of locking arrangement

1

-

-

... More
Replacement of GM Wear ring (Machined/Finished) as per sample

1

-

-

... More
Replacement of GM Neck ring (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Repairs to 6'' Submersible Pump Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the pump from site to workshop and back after repairs. At site the pump shall be recoupled with the motor all power connections shall be reconnected with the pump and motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new rubber washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Replacement of impeller

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Diffuser

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Pump Bowl

1

-

-

... More
Fabrication, providing and fitting of Pump Shaft

1

-

-

... More
Replacement of cast iron non return valve

1

-

-

... More
Replacement of Stainless-steel strainers

1

-

-

... More
Replacement of cast iron threaded discharge outlet

1

-

-

... More
Replacement of bowl stage bushes for fitment of impellers

1

-

-

... More
GM/Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Nitryl rubber

1

-

-

... More
Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side with length 600mm as per site requirement (with thickness of pipe and flange as per sample

1

-

-

... More
50 mm Dia

1

-

-

... More
65 mm Dia

1

-

-

... More
80 mm Dia

1

-

-

... More
100 mm Dia

1

-

-

... More
Fabrication, providing and fitting of locking arrangement

1

-

-

... More
Replacement of GM Wear ring (Machined/Finished) as per sample

1

-

-

... More
Replacement of GM Neck ring (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Repairs to 7'' Submersible Pump Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the pump from site to workshop and back after repairs. At site the pump shall be recoupled with the motor all power connections shall be reconnected with the pump and motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new rubber washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Replacement of impeller

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Diffuser

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Pump Bowl

1

-

-

... More
Fabrication, providing and fitting of Pump Shaft

1

-

-

... More
Replacement of cast iron non return valve

1

-

-

... More
Replacement of Stainless-steel strainers

1

-

-

... More
Replacement of cast iron threaded discharge outlet

1

-

-

... More
Replacement of bowl stage bushes for fitment of impellers

1

-

-

... More
GM/Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Nitryl rubber

1

-

-

... More
Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side with length 600mm as per site requirement (with thickness of pipe and flange as per sample

1

-

-

... More
50 mm Dia

1

-

-

... More
65 mm Dia

1

-

-

... More
80 mm Dia

1

-

-

... More
100 mm Dia

1

-

-

... More
Fabrication, providing and fitting of locking arrangement

1

-

-

... More
Replacement of GM Wear ring (Machined/Finished) as per sample

1

-

-

... More
Replacement of GM Neck ring (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Repairs to 8'' Submersible Pump Dismantling of the submersible pump at site, shifting to the workshop, repairing, shifting back to site. All the technical manpower, tools and tackles involved in the execution of the job for disassembling and assembling after repairs shall be arranged by the firm. The job is inclusive of transportation charges for shifting the pump from site to workshop and back after repairs. At site the pump shall be recoupled with the motor all power connections shall be reconnected with the pump and motor assembly shall be lowered back into the sump/Well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new rubber washers/RI cloth in between the flanges where ever required. After complete lowering of the unit by the firm, the unit shall be tested on full load. Job includes repairing / fabrication and providing / replacement of following items.

1

-

-

... More
Replacement of impeller

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Diffuser

1

-

-

... More
Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Noryl

1

-

-

... More
Replacement of Pump Bowl

1

-

-

... More
Fabrication, providing and fitting of Pump Shaft

1

-

-

... More
Replacement of cast iron non return valve

1

-

-

... More
Replacement of Stainless-steel strainers

1

-

-

... More
Replacement of cast iron threaded discharge outlet

1

-

-

... More
Replacement of bowl stage bushes for fitment of impellers

1

-

-

... More
GM/Bronze

1

-

-

... More
Cast Steel / Stainless Steel.

1

-

-

... More
Nitryl rubber

1

-

-

... More
Fabrication, providing, fitting of MS nipples threaded on one side and flanged on other side with length 600mm as per site requirement (with thickness of pipe and flange as per sample

1

-

-

... More
50 mm Dia

1

-

-

... More
65 mm Dia

1

-

-

... More
80 mm Dia

1

-

-

... More
100 mm Dia

1

-

-

... More
Fabrication, providing and fitting of locking arrangement

1

-

-

... More
Replacement of GM Wear ring (Machined/Finished) as per sample

1

-

-

... More
Replacement of GM Neck ring (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-

... More
Muff coupling (Machined/finished) out of SS-400 material as per sample

1

-

-

... More
Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

1

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Combined ShapeCreated with Sketch.Sign In
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
TENDER BY COUNTRIES
View All
United States Tenders|
United Kingdom Tenders|
Spain Tenders|
France Tenders|
Qatar Tenders|
Australia Tenders|
Canada Tenders|
China Tenders|
Malaysia Tenders|
Maldives Tenders|
Singapore Tenders|
Bangladesh Tenders|
Ethiopia Tenders|
Bhutan Tenders|
Kuwait Tenders|
Oman Tenders|
Germany Tenders|
Egypt Tenders|
Ghana Tenders|
Saudi Arabia Tenders
TENDER BY AUTHORITIES
View All
Federal Road Agency Tenders|
Bangladesh Railway Tenders|
Area Metropolitana De Barcelona Tenders|
Jsc Russian Railways Tenders|
Kuwait Oil Company Tenders|
Civil Aviation Authority Tenders|
Food And Agriculture Org. Tenders|
Eskom Tenders|
Energy Regulation Commision Tenders|
Dept Of Defence Tenders
TENDER BY CATEGORIES
View All
Agriculture Or Forestry Works Tenders|
Automobiles And Auto Parts Tenders|
Civil And Construction Tenders|
Consultancy Services Tenders|
Education And Training Services Tenders|
Electrical And Electronics Tenders|
Finance And Insurance Sectors Tenders|
Food Products Tenders|
Furnitures And Fixtures Tenders|
Healthcare And Medicine Tenders
TENDER BY PROCUREMENT
Goods Tenders|
Works Tenders|
Services Tenders
OFG MANUFACTURING BUSINESSES PRIVATE LIMITED
  • Head Office
    6th Floor, Global Business Park, Tower A, Besides Guru Dronacharya Metro Station, Gurugram, Haryana - 122002, India
  • Sales Office
    B - 705 & 706, Sankalp Iconic Tower, Opp. Vikramnagar Colony, Iscon Cross Road, S. G. Highway, Ahmedabad - 380054, India
COMPANY
POLICIES
SUPPORT
MOBILE APPS
© Powered by OFG MANUFACTURING BUSINESSES PRIVATE LIMITED, All Rights Reserved