Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Eprocure
Opening Date12 Jul 2021
Closing Date24 Jul 2021
Tender Amount₹ 1,70,81,000
Costs
EMD
Refer DocumentsDocument Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_PHE_130378_1Bid Award Id
ViewTender No
Fresh NIT27/PHS OF 2021-20Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
100 mm dia. Gl pipe
1000
-
-
80 mm dia. Gl pipe
500
-
-
65 mm dia. Gl pipe
500
-
-
50 mm dia. Gl pipe
1000
-
-
40 mm dia. Gl pipe
1000
-
-
25 mm dia. Gl pipe
1000
-
-
20 mm dia. Gl pipe
1000
-
-
Extra cost on account of Providing of M.S Flanges 12mm thick including cost of nuts, bolts, washers incl cutting, welding and all sorts of carriages involved up to the site of work. Complete job.
-
-
-
100mm dia
164
-
-
80 mm dia
82
-
-
Providing and fixing C.I. sluice valves (with cap) complete nuts, rubber insertions etc. (the tail pieces if required will be paid separately).100mm dia (Class I)
3
-
-
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately).50 mm dia.
-
-
-
50 mm dia.
2
-
-
80 mm dia.
2
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):80mm nominal bore
2
-
-
Manufacturing/ fabrication and fixing of M.S surface box/chambers of size (0.60x0.60x0.75m) made out of 6mm thick MS sheet using 40x40x5mm angle iron for frame including cutting, hoisting and fixing in position incl. all locking arrangements, handles hinges etc and applying priming coat of approved steel primer. The job includes providing and laying of cement concrete 1:2:4 on the base of frame to be embedded in, including all sorts of carriages involved for the completion of the job. The job is to carried out as per the directions of Site-incharge.complete job.
2
-
-
Providing of FHTCs to every unconnected household including cost of 15mm to 20mm dia G.I pipe for a length of 6 to 20 mtrs with G.I fittings /specials incl. laying & fitting of pipes ,earth work in excavation and refilling.The job includes providing and fixing of Water Meters. complete job.
180
-
-
B- Construction of Chowkidar Quarter
-
-
-
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.
39.7
-
-
Providing & laying of stone soling hand packed in trenches.(Nallah)
7.35
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
4.38
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
17.21
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,
finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
5.85
-
-
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
27.2
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
40.91
-
-
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
5.22
-
-
Suspended floors, roofs, landings, balconies and access platforms.
33.84
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.
447
-
-
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2000
-
-
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
102.63
-
-
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
18.29
-
-
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
18.29
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood
0.37
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35mm Thick.First class kail wood
3.66
-
-
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm thick.First class kail wood
4.26
-
-
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood.35mm thick
4.79
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
34
-
-
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
8
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
20.8
-
-
Providing and installation of water Geyser 50 ltr of reputed make Like Havells/Recold/Venus, incl nuts bolts ,and all sanitary fittings ,angle valves,cp connections etc complete job.
1
-
-
Providing ,installation and fixing of 1HP water motor of ISI/Rpute make incl. cost of electrical wiring,control switches,pipe work ,fittings,specials and insulation.complete job.
1
-
-
providing of lighting electric points incl. Cost of wiring,earthing,switches, MCBs,LED Luminaries and cost of wiring from 1.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete
10
-
-
Providing,installation and testing of heating points incl. Cost of wiring,earthing,switches, MCBs, switch boards and all accessories cost of wiring from 2.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete
6
-
-
providing of 10mm thick service line of reputed make:Havells/L&T/Polycab/Legrand.complete job
50
-
-
Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm
1
-
-
Providing and fixing of salem stainless steel kitchen sink of ISI mark 304 (18/8) as per IS 13983 with C.I brackets and S.S plug 40mm incl painting of fittings and brackets,incl cost of waste pipe ,cutting and making good the walls whereever required.(610x510x200mm).
1
-
-
Providing of fixing of sanitary items as under:
-
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
including cutting and making good the walls etc.:15 mm dia. nominal bore
50
-
-
Providing and fixing brass bib cock of approved quality.15 mm nominal bore
4
-
-
Providing and fixing of wash basin vitreous china of ISI mark incl cost of fittings and brackets,incl cost of waste pipe , angle valves,cutting and making good the walls whereever required.(450 x 300 mm).
1
-
-
Providing and fixing 15 mm nominal bore C.P. brass angle valve of approved make conforming to IS : 8931
6
-
-
Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
-
-
Providing & fixing of items like,, a soap case and a towel rod,holders,Mirror with mirror shelf incl cost of screws etc complete job .
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
500
-
-
Applying priming coat: With ready mixed pink or grey primer of approved brandand manufacture on wood work (hard and soft wood)
25.78
-
-
Providing and applying white cement based putty of specified thickness,
of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick
62.76
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
88.54
-
-
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required:0.50 mm thick with zinc coating not less than 275 gram/m2
67.5
-
-
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2
10
-
-
Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size )
20
-
-
Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.
-
-
-
cement & steel from Divl. Store/source for an avg. lead of 16kms.
9.36
-
-
Sand & Stone aggregates for an avg. lead of 35 kms.
27.49
-
-
Stone soling for an avg. lead of 15 km
7.35
-
-
Bricks for an Avg. lead of 45 km
9145
-
-
Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.
-
-
-
cement
8.91
-
-
steel
0.45
-
-
Sand & Stone aggregates
27.49
-
-
Stone soling
7.35
-
-
Bricks
9145
-
-
C-Construction of Pump House Cum Operators Quarter
-
-
-
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.
143.29
-
-
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil :
12.79
-
-
Providing & laying of stone soling hand packed in trenches.(Nallah)
20.3
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
7.36
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
41.49
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,
finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
19.17
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
78.1
-
-
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
18.72
-
-
Suspended floors, roofs, landings, balconies and access platforms.
52.66
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.
1725
-
-
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
3000
-
-
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
92.04
-
-
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)
19.61
-
-
Dry random rubble masonry with hard stone in foundation and plinth:With bond stone.Quarry
15.9
-
-
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)
17.5
-
-
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
17.5
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):First class kail wood
0.83
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.35mm Thick.First class kail wood
12.55
-
-
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm thick.First class kail wood
4.93
-
-
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood.35mm thick
8.55
-
-
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
34
-
-
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
44.63
-
-
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
3.06
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades, except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
11.88
-
-
Providing and installation of water Geyser 50 ltr of reputed make Like Havells/Recold/Venus, incl nuts bolts ,and all sanitary fittings ,angle valves,cp connections etc complete job.
1
-
-
Providing ,installation and fixing of 1HP water motor of ISI/Rpute make incl. cost of electrical wiring,control switches,pipe work ,fittings,specials and insulation.complete job.
1
-
-
providing of lighting electric points incl. Cost of wiring,earthing,switches, MCBs,LED Luminaries and cost of wiring from 1.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete
10
-
-
Providing,installation and testing of heating points incl. Cost of wiring,earthing,switches, MCBs, switch boards and all accessories cost of wiring from 2.5mm thick PRF Coil.(all the items should confirm to the IS codes from reputed manufacturer such as Havells/L&T/Polycab/Legrand.complete
6
-
-
providing of 10mm thick service line of reputed make:Havells/L&T/Polycab/Legrand.complete job.
50
-
-
Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm
1
-
-
Providing and fixing of salem stainless steel kitchen sink of ISI mark 304 (18/8) as per IS 13983 with C.I brackets and S.S plug 40mm incl painting of fittings and brackets,incl cost of waste pipe ,cutting and making good the walls whereever required.(610x510x200mm).
1
-
-
Providing of fixing of sanitary items as under:
-
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
including cutting and making good the walls etc.:15 mm dia. nominal bore
50
-
-
Providing and fixing brass bib cock of approved quality.15 mm nominal bore
4
-
-
Providing and fixing of wash basin vitreous china of ISI mark incl cost of fittings and brackets,incl cost of waste pipe , angle valves,cutting and making good the walls whereever required.(450 x 300 mm).
1
-
-
Providing and fixing 15 mm nominal bore C.P. brass angle valve of approved make conforming to IS : 8931
6
-
-
Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.
1
-
-
Providing & fixing of items like,, a soap case and a towel rod,holders,Mirror with mirror shelf incl cost of screws etc complete job .
1
-
-
Providing and placing on terrace (at all floor levels) polyethylene water
storage tank ISI : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank
500
-
-
Providing and applying white cement based putty of specified thickness,
of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick mm thick
87.2
-
-
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One coat
87.2
-
-
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
62.64
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
97.52
-
-
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required:0.50 mm thick with zinc coating not less than 275 gram/m2
102
-
-
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2
25.38
-
-
Providing and fixing plained eaves boarding.2nd class kail wood 250x32 mm (nominal size )
32.2
-
-
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover
5.56
-
-
Providing and fixing ball bearing for rolling shutters.
2
-
-
Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.
-
-
-
cement & steel from Divl. Store/source for an avg. lead of 16kms.
18.42
-
-
Sand & Stone aggregates for an avg. lead of 35 kms.
79.42
-
-
Stone soling/Quarry stone for an avg. lead of 15 km
36.2
-
-
Bricks for an Avg. lead of 45 km
8312
-
-
Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.
-
-
-
cement
16.69
-
-
steel
1.72
-
-
Sand & Stone aggregates
79.42
-
-
Stone soling
36.2
-
-
Bricks
8312
-
-
D-Construction of Chain Link Fencing
-
-
-
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.
27
-
-
Providing & laying of stone soling hand packed in trenches.(Nallah)
9
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
6
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
10.8
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
28.02
-
-
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
2.25
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
178.93
-
-
Columns, pillars, piers, abutments, posts and struts.
12
-
-
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
186.6
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.
180
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1915.85
-
-
Providing and fixing G.I. chain link fabric fencing of required width in
mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm
174.6
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
108
-
-
Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.
-
-
-
cement & steel from Divl. Store/source for an avg. lead of 16kms.
12.71
-
-
Sand & Stone aggregates for an avg. lead of 35 kms.
65.91
-
-
Stone soling for an avg. lead of 15 km
9
-
-
Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.
-
-
-
cement
12.53
-
-
steel
0.18
-
-
Sand & Stone aggregates
65.91
-
-
Stone soling
9
-
-
E-Construction of Protection bund
-
-
-
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil :1 meter from cutting edge.
35
-
-
Providing & laying of stone soling hand packed in trenches.(Nallah)
14
-
-
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
10.5
-
-
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
18.02
-
-
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement:1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
45
-
-
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
Foundations, footings, bases of columns etc. for mass concrete.
38.5
-
-
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc
360
-
-
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
360
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.
5088
-
-
Carriage of material from source upto dumping site by mechanical means incl. loading, unloading and stacking complete.
-
-
-
cement & steel from Divl. Store/source for an avg. lead of 16kms.
34.81
-
-
Sand & Stone aggregates for an avg. lead of 35 kms.
103.4
-
-
Stone soling for an avg. lead of 15 km
14
-
-
Extra Carriage of material from dumping site to actual site of work by manual means (Head load) for an avg lead of 100 mtrs.
-
-
-
cement
29.73
-
-
steel
5.09
-
-
Sand & Stone aggregates
103.4
-
-
Stone soling
14
-
-
F-Construction of Approach Road
-
-
-
Preparation of subgrade by excavating earth to an average of 22.5 cm
depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus
earth upto 50 meters.
660
-
-
Supplying and stacking at site:Graded crushed stone aggregate of size:
-
-
-
90 mm to 45 mm
69.11
-
-
63 mm to 45 mm
52.17
-
-
53 mm to 22.4 mm
52.17
-
-
Supplying and stacking at site:Stone screening of size:13.2 mm nominal size (Type A)
11.16
-
-
Laying, spreading and compacting stone aggregate of specified sizes to
WBM specifications in uniform thickness, hand picking, rolling with 3
wheeled road / vibratory roller 8-10 tonne capacity in stages to proper
grade and camber, applying and brooming requisite type of screening
/binding material to fill up interstices of coarse aggregate, watering andcompacting to the required density.
45.16
-
-
Carriage of material from source upto site of work by mechanical means incl. loading, unloading and stacking complete.
-
-
-
Stone aggregates below 40mm for an avg. lead of 35 kms.
11.16
-
-
Stone aggregates Above 40mm for an avg. lead of 35 kms.
173.45
-
-
G-Construction of 0.30 Lac Gallon OHT
-
-
-
Design, testing and successful commissioning of RCC Over Head Tank (shell type) with architectural features of 0.30 lac gallons capacity in single compartment with 20.4 mtrs staging height (above ground) including providing and fixing of rising main, supply main, washout, overflow connected with supply main 100mm dia pipe with flanged joints 12mm thick flanges, washers, nuts, bolts, welding, 100mm dia sluice valves including tail pieces, nuts, bolts, washers, fixing cost of 100mm dia GI pipe Class “B” with standard pipe fittings such as tees, bends, nipples, cutting of threads, sluice valve of VAG/AVK (kirloskar make) including tail pieces and all necessary accessories such as lightening arrester, water level indicator, RCC stair from ground level upto tank floor levels gallery along inside columns gallery upto top of dome and inside the tank with side steel railing, ventilating cowls, main hole covers of M.S. steel sheet with angle iron frame and M.S. railing with stair and roof flooring vertical pipe lines, top water contained should not be permitted, including levelling of ground and boulder filling inside the tank upto door level including providing fixing of MS door with frame of angle iron including priming/snowsem of tank surface outer side. Complete job.Scope also includes approval of Design from DIQC.Complete job.
1
-
-
H-Electro-Mechanical Component
-
-
-
Design, supply, Installation, Testing & Commissioning of Submersible Pumping Equipment Suitable for bore well with following specifications:- PUMP:-
Make - KSB/ Kirloskar/ WIPL / M & P
Assumed Safe Discharge Range - 4000 to 5000 GPH
Assumed Head Range - 60 to 100 M Speed - 2900 Rpm
Impeller- Bronze / SS Type - Multistage bowl type Type of fluid to be pumped - Water from tube well
The bowl plate shall be provided with name plate giving following details / Information. a. Name of the manufacture or trade mark.
b. Serial No of the pump set.c. Pump type.d. No. Of stages.
e. Total head & discharge.
SUCTION CASE WITH STRAINER:
The opening in the suction case for the entrance of the liquid shall be of proper size and shape to avoid eddy currents. Suction case be fitted with a strainer made of corrosion – resistant material. Suitable sand guard shall be provided just above the suction case bearing to prevent the entry of the foreign matter into the suction case.
MOTOR:- Make = KSB/M&P/ Kirloskar/ M & P
Rating = Subject to head & discharge.
Method of starting = Star – Delta Speed = 2900 (Syn)
Voltage = 415 + 15 % Class of insulation = Suitable for above rating.
The submersible motor shall be squirrel cage induction motor and the windings shall be wet type. The motor shall be suitable for operation on voltage and frequency conforming to IS : 585 – 1962 (with latest amendments). The earthing of the motor shall comply with IS : 3043 – 1966 (with latest amendments) . The thrust bearing of the motor shall be of adequate size to with stand the weight of all rotating parts as well as the imposed hydraulic thrust and lubricated suitably. The motor windings and bearing bushes of the rotary shaft shall be cooled / lubricated by water. The motor shall have protection by means of cable glands, rubber seals etc from ingress of bore well water, sand and other foreign material. The thrust bearing housing shall be provided with a drain plug to empty the oil / pure water filled into the thrust bearing housing / motor. The rotor shaft shall be provided with shaft protecting sleeves having a surface finish of 0.75 micron Ra Max. The motor shall also be provided with breathing attachment like bellows, diaphragm etc to compensate the volumetric variations due to changes in the temperature. The motor shall be made of corrosion resisting materials to resist corrosion under normal conditions and the motor shall have a name plate giving following information:-
• Name of manufacturer • Manufactures number and frame • Type of duty • Frequency in Hz. • Number of phases • Rated output in KW/HP
• Rated voltage and including connections• Approximate current in Ampere at rated output • Speed in revolutions per minute at rated output.The pump and motor shall be coupled through a steel coupling The pumping unit shall have to be provided with allied accessories / attachment viz M.S strengthening clamp, pump motor coupling. The job includes P/F of G.I. Nipples 2’ long having one side threaded and the other side fitted with 12 mm thick M.S. Flange by way of welding in double layers. The flange so fitted shall have suitable dia. of holes for accommodating bolts etc. The nipple is to be fitted with submersible pumping unit as per site requirement.
Note: Since the tube well has not been drilled at site as yet , as such the above parameters have been assumed and may vary at the time of actual execution of works depending on the actual well parameters obtained.
4
-
-
P/F of 3 Core, 10 Sq.mm Cu- Submersible Cable ( Flat Cable) as per IS694:1990 ( Standard Insulation) of L& T/ Havells Make
270
-
-
Fabrication, providing & fitting of 80 mm dia. (class-C) Flanged GI column pipes each of 10 rft length; The job includes the cost of 18 mm thick MS flanges on both sides and welding in two layers to make the flanged joint strong and leak proof. The pipe of 10 ft length is to be weld on both sides with flanges of standard size with Advani /Adore electrode (Advani Oerlikon make). The job includes all types of skilled labours, power supply diesel Generator etc required for the job, with suitable size nuts, bolts, RI Cloth in the flanged joints of column pipes. (Note; Dia. is assumed as Tube well is not yet drilled)
24
-
-
Fabrication, providing & fitting of 80 mm dia.(class-c) Flanged GI delivery pipes of standard length. The job includes the cost of 18 mm thick MS flanges and welding in two layers to make the flanged joint strong and leak proof. The delivery pipe is to be weld on both sides with flanges of standard size with Advani /Adore electrode (Advani Oerlikon make). The job includes all types of skilled labours, power supply diesel generator etc required for the job,with suitable size nuts bolts RI Cloth in the flanged joints of delivery pipes. The pipe is to be laid underground in trenches by cutting of hard soil as per site condition.(Note; Dia. is assumed as Tube well is not yet drilled)
100
-
-
Fabrication providing & fitting of split type MS Clamps 80mm dia ,8mm thick,2.5” wide(dia.) and 2.5 feet long for lowering of column pipes and holding of pumping unit after lowering. The job includes the cost of required size of nuts and bolts .
2
-
-
Providing & fitting of 80 mm dia. 90 to120 degree bend/ offsets/reducer made of (class-B) GI pipe and flanged on both ends after cutting threaded portion to make it leak proof. The bend shall have two no. flanges 18 mm thick weld on both sides in two runs of welding. The job includes p/f of suitable size nuts, bolts, RI Cloth required for jointing,
(Note; Dia. is assumed as Tube well is not yet drilled)
4
-
-
Fabrication, Providing and fitting of washout arrangement to the rising main by way of P/F of 80 mm dia G.I flanged pipe length(c-class)-1mtr including Providing / Fitting of 80 mm dia. G. I. Tee of equal sides duly flanged 16mm thick on all three sides with welding in double layers to make leak proof joints. Nuts, bolts and rubber insertion washers required are also included in the job.(Note; Dia. is assumed as Tube well is not yet drilled)
1
-
-
Fab., Erection and Fixing of M.S Stool to the casing assly.of the production well.The stool shall be fabricated out of ISMC – 100 and ISA 50×50×6mm in such a way that the top of the stool flushes with top of casing pipe.The size of stool shall be 2’×2’ with a height of 3’,adequate bracings are to be provided and a detachable M.S plate of 2’×2’ size and 10mm thick , splitted in two parts having 3” dia. Size hole at the centre.
1
-
-
Providing, fabricating and fitting of gravel Hooper fabricated out of angle iron ISA (50x50x5) and MS plates, chequered plate 6mm sheeting all over five sides including cover at top and excluding bottom side of size 3’x3’ from top and 2’x2’ at bottom having 3’ depth(frustum type).The top over is to be split in to two parts with making/cutting of circular hole having overall diameter of 12 inch and hinged with the two sides of the hopper by way of P/F of required size of moveable hinges with locking arrangements at the top of the hooper. The job includes earth work excavation from the top of the well casing/flooring up to the ground level for making of gravel pit to accommodate gravel hooper.The job includes all head loads and lifts and anti corrosive painting in Silver / Blue/ RED coating following by red oxide 2 coats.
1
-
-
Fabrication / Erection of Channel iron column to act as support for resting of monorail crane as per following details:-
Vertical Posts = ISMC 150 No. of vertical posts = 02 Nos.
Vertical channel section each post = 02 Nos. vertical post bracing = ISMC 100 Sole / Matching plates = 500x300x12 thick Height of vertical posts = 6.0 M size of vertical post concrete blocks = 600x600x900 mm(Depth) Concrete grade = M20
welding Electrode = Overcord SS of Adore/ESAB/L&T/Advani
Monorail Section = ISMB 200
length of monorail = 5M
Steel Detail :
i. ISMC 150 6.0Mx2x2 = 24 M @ 16.4kg/m = 394 kg
ii ISMC 100 0.25Mx8x2x2 = 8 M @ 9.2kg/m = 73.60 kg
iii Plate 0.500x0.300x8 (12mmthk) = 1.20 M²(12thk) = 112.80 kg
iv Monorail ISMB 200 5 M @ 25.4 kg/M = 127kgs
v Bolts/Nuts (L.S) = 20 kgs Total = 727.40 Kg
The Gantry shall be painted by one coat of Iron oxide paint and two coats
and two coats of Yellow colour enamel paint
Providing/laying of concrete block for vertical Posts in 1:2:4 of Size 1.5’x1.5’ X2’-02nos(0.24M3)
The job includes providing/fitting of ISA 40x40x5 to act as ladder on both Vertical columns.
1
-
-
Providing/fitting of manual type chain pully block having following features
Make = INDEF/PULL LIFT Capacity = 5 ton
No. Of chain falls = 4
Min. Height of lift = 6 M
. Gears:- The hoist shall have precision cut super and helical gears made of alloy steel mounted on bearings and housed in a dust proof gear box. The lubrication of gears be of high viscosity and temperature for longer life of gears. Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation.
Load chain wheel:- Specially designed, perfectly machined wheel providing correct grip of load chain made of malleable cast iron makes the hoist most safe and reliable against any failure
1
-
-
Providing, Fitting of 80 mm,PN 1.6/16, Ductile Iron double flanged, soft seated glandless gate/ sluice valve. Body and bonnent of ductile cast iron, wedge with fully vulcanized EPDM rubber(Approved for drinking water) and NBR seal. Gate /Sluice valve shall be compatible for buried application and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating inside and outside approved for drinking water the valve shall be supplied along with hand wheel.
The job includes providing and fitting of 02 No. M.S Flanges perfectly adaptable to the inbuilt flanges of the valve, which shall be fitted with delivery mains of the pumping unit. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
Make :VAG / TALIS Make.(Note; Dia. is assumed as Tube well is not yet drilled)
4
-
-
Providing, Fitting of 80 mm,PN 1.6/16, Ductile Iron double flanged, Slanted seat swing check valve( NRV). Body of ductile cast iron with fully encapsulated vulcanized EPDM rubber(Approved for drinking water) . Gate /Sluice valve shall be compatible for buried application and shall be safe to install in both horizontal and vertical positions
It shall have electrostatic epoxy coating inside and outside approved for drinking water.
The job includes providing and fitting of 02 No. M.S Flanges perfectly adaptable to the inbuilt flanges of the valve, which shall be fitted with delivery mains of the pumping unit. Cost on account of Nuts, bolts, gaskets, etc required for the job is included in the scope of work.
Make :VAG / TALIS make.(Note; Dia. is assumed as Tube well is not yet drilled)
3
-
-
Creation of 63 KVA Electric Sub Station as per the technical specifications given below:-
a) H T transformer S/I/T/C of 63 KVA, 3 phase and neutral HT Transformer of following specifications:-
The H.T transformer shall be manufactured /supplied incompliance with latest relevant IEC/IEEE/IS Standards. The technical specifications of the H. T. Transformer shall be as under.
I. Type: 11 KV / 0.4 KV / Oil Cooled.
II. Capacity: 63 KVA, 3 Phase & Neutral.
III. Operating Conditions.
Input :11000 Volts
Output :415 +-10%Volt AC, 3 Phase in 3 Phase Terminals
Input :3 No H.T. Bush Rods with insulators, washers, nuts etc
Output :4 No L.T. Bush Rods with Insulators, washers, nuts etc
IV. Core:-High Permeability Core for heat efficient dissipation, shall be fabricated out of Strips of suitable size and gauge.
V. Transformer Coils: Suitable No of HT & LT Coils in each Leg. The Transformer Coils shall be fabricated out of superior quality Aluminum wire /strips and properly wound.
VI. Coolant: The HT Transformer shall be provided with “A” Grade Transformer Oil filled up to required level.
VII. Enclosure: The Core, Coils, Brackets shall been closed in M. S. Tank of suitable thickness with cooling conducts / fins on either side. The Tank shall be provided &fitted with drain cock, drain plug and oil level indicator. The MS tank shall be applied with two coats of enamel paint of standard quality & approved shade.
VIII. Earthing: Earthing shall be as per the latest guidelines of the designated authority as per state electricity board guidelines and shall be complete in all respects.
b) Transformer Bed:-
The HT transformer has to be erected on transformer bed fabricated by Providing and erecting of (02 No) 09-Mtr (SP-33) steel Tubular Poles as per IS-2713 part-II-1980. The Steel tubular poles shall have to be erected by grouting in cement concrete block in (1:1½:3 mix) of adequate size to avoid tilting and in round shape. The poles shall be fitted / welded with 12 mm thick M. S Plate of 40 mm x 40 mm in size at the bottom and having holes drilled at top at appropriate position for accommodating MS fasteners for holding crosses and all safety/ operative devices. The job includes Providing and fitting of ISMC-100, 1500MM, 2nos, on the above erected tubular poles by welding/ by bolting for resting of HT transformer. The whole structure shall be applied with two coats of anti-corrosive paint and two coats of paint of silver shade.
c) Insulators & other allied Accessories:-
Providing & fitting of the following:
A)P/F of 11KV Pin Insulators with Pins to be fitted on the Tubular Pole.
B) Providing / Fixing of 9’ long channel iron fabricated out of ISMC 75 x 40 mm(7 No.) duly drilled with suitable size holes for accommodating nuts bolts for fixing accessories. (As per Site requirement for Tapping at Sub Station).
C) Providing / Fixing of 9’ long channel iron fabricated out of ISMC 100 x 50 mm (2 no’s) duly drilled with suitable size holes for accommodating nuts bolts for fixing accessories. The job includes P/F of pin insulators.
D)P/F of 11KV Station type Disc Set. E)P/F of DO Fuse Set suitable for 11 KV Line application.
F)P/F of Lightening Arrestor Set suitable for 11 KV Line applications.
G)P/F of GO Link Set including cost of channels ,rod & handle etc.
i)P/F of Aluminum Thimbles of assorted ratings including crimping to intake and out take connections as required.
j)Providing / Installation of Guy consisting of complete Guy Assembly Turn Buckle Plate, Guy Insulators as per IS standard.
k)P/F of G.I Wires of required Gauge.
l)Providing and Fitting of Transformer Belt fabricated out of ISA 40x40mm, 10feet long for fastening of the Distribution Transformer, job includes providing and fitting of nuts and bolts of requisite size and no.
m)Providing, Installation of Earthing station comprising of company fabricated earthing electrodes as per IS: 3043. The job includes auguring of bore of required dia. / depth for installation of electrode along with black fill compound mixed with soil and all other items required thereof for achieving the best result. The job shall include providing & fitting of nuts, bolts and a “Danger Plate” indicating “11000 V – DANGER”, complete in all respect. n)All the above work of Electric Sub Station has to be executed strictly as per the recommendations of the Inspection authority of the Power Development Department along with inspection clearance certificate from electric inspection division Srinagar shall have to be provided at the time of charging of the sub station.
o)The firm has is responsible up to three months after commissioning & all sorts of enquires to be settled by the firm with electrical department up to first billing with our department.
Note: Any other items required for complete of sub station if not mentioned above shall have to be provided by the firm for completion of the job
1
-
-
S/I/T/C of 63 KVA, 3 phase and neutral HT Transformer of following specifications:-
The H.T transformer shall be manufactured /supplied incompliance with latest relevant IEC/IEEE/IS Standards. The technical specifications of the H. T. Transformer shall be as under.
I. Type: 11 KV / 0.4 KV / Oil Cooled.
II. Capacity: 63 KVA, 3 Phase & Neutral.
III. Operating Conditions.
Input :11000 Volts
Output :415 +-10%Volt AC, 3 Phase in 3 Phase Terminals
Input :3 No H.T. Bush Rods with insulators, washers, nuts etc
Output :4 No L.T. Bush Rods with Insulators, washers, nuts etc
IV. Core:-High Permeability Core for heat efficient dissipation, shall be fabricated out of Strips of suitable size and gauge.
V. Transformer Coils: Suitable No of HT & LT Coils in each Leg. The Transformer Coils shall be fabricated out of superior quality Aluminum wire /strips and properly wound.
VI. Coolant: The HT Transformer shall be provided with “A” Grade Transformer Oil filled up to required level.
VII. Enclosure: The Core, Coils, Brackets shall been closed in M. S. Tank of suitable thickness with cooling conducts / fins on either side. The Tank shall be provided &fitted with drain cock, drain plug and oil level indicator. The MS tank shall be applied with two coats of enamel paint of standard quality & approved shade.
1
-
-
Steel Tubular Poles:-Providing and erecting of 09-Mtr (SP-33) steel Tubular Poles as per IS-2713 part-II-1980. The Steel tubular poles shall have to be erected by grouting in cement concrete block in (1:1½:3 mix) of adequate size to avoid tilting and in round shape. The poles shall be fitted / welded with 6 mm thick M. S Plate of 300 mm x 300 mm in size at the bottom and having holes drilled at top at appropriate position for accommodating MS fasteners for holding crosses and all safety/ operative devices. The whole structure shall be applied with two coats of anti-corrosive paint and two coats of paint of silver shade. The job includes
I. Providing / Fixing of V- cross arms fabricated out of ISMC-75x50MM channels of suitable length to carry insulators, ACSR / ABC HT cable. II. P/F of 3 no. 11KV Pin Insulators with Pins / holding clamps with nuts and bolts to be fitted on the Tubular Pole.
iii. Providing and fixing of suitable spiral earthing to all erected poles
7
-
-
Steel Tubular Poles:-Providing and erecting of 09-Mtr (SP-33) steel Tubular Poles as per IS-2713 part-II-1980. The Steel tubular poles shall have to be erected by grouting in cement concrete block in (1:1½:3 mix) of adequate size to avoid tilting and in round shape. The poles shall be fitted / welded with 6 mm thick M. S Plate of 300 mm x 300 mm in size at the bottom and having holes drilled at top at appropriate position for accommodating MS fasteners for holding crosses and all safety/ operative devices. The whole structure shall be applied with two coats of anti-corrosive paint and two coats of paint of silver shade.
2
-
-
P/F of Guy Wire Complete with shekel insulator to MS poles at necessary locations. The Job includes excavation of pit for lowering Guy stone with guy wire and back filling of same.
8
-
-
Providing / Fixing of 9’ long channel iron fabricated out of ISMC 75 x 40 mm duly drilled with suitable size holes for accommodating nuts bolts for fixing accessories. ( As per Site requirement for Tapping at Sub Station).
2
-
-
P/F of G.O. Link set Cu Grips suitable for 11 KV Line including cost of channels, rod, handle, fixtures etc.
1
-
-
P/F of Disc Insulator set suitable for 11 KV Line including cost of fixtures etc.
1
-
-
Earthing for Sub station structure and Generator .
P/I of earthing station comprising of company fabricated earthing electrode as per IS : 3043 . The job includes Auguring of bore of required dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip, making of surface structure in brick/cement concrete material as per relevant standards.
Safe earthing electrode size : 50 mm dia , Length : 2000 mm
Back fill compound : 30 kg
Model/make : JVM -393, Ashlok, Recons.
The Job P/F of GI Strips in 25mm x 3mm Thick with necessary fixtures for earthing to Lighting Arrestor , Sub Station Structure, Neutral Point of Distribution Transformer , HT Body .
4
-
-
Providing/ fitting of link rod for isolating link set.
1
-
-
Providing and Fitting of 0.05 ACSR Aluminium conductor.
700
-
-
P/F of 35 Sq.mm , 3.5 Core, ABC Al HT cable 11 KV of Havells/Gloster/ Polycap/ at necessary locations.
100
-
-
P/F of 11 KV HT Kit at necessary locations.(9 Nos)
3
-
-
a) Fabrication, providing and fitting of L.T Modular control panal “ Padestal type” of appropriate size duly powder coated & fabricated out of 2mm crca sheets sheet having required openings/vents and protections/ locking arrangements/ mountings for the fitment of devices and including arrangements of terminal for earthing to whole panal body and shall have comprised of following devices/ items:
A) Enclosure details :- Free standing, floor mounting, compartmentalized design. Material ----CRS,
Thickness of sheet steel used ----02mm,
Three phase indication lumps in red, yellow & green shades,
Application -- indoor. Cable try ---- bottom , painting --- shade Siemens grey.
B) Change Over Switch
Qnty = One No.
Type = Front operated on load.
No. of poles = 4 pole
Rating = 100A
Rated operated voltage = 415 ± 15% VOLTS, 50 ± 3 % C/S
Make = L&T/Havells/Siemens
C) Bus Bar : Electric grade Almimum with Red, Blue Yellow and Black tapping’s of adequate section. Rating : 100 Amp.
For Three pahase & Neutral D) Main MCCB with spreader terminals Make : L & T / Schinder make D- Sine
Amp : 200 Amp
No.of Poles :04
Breaking Capacity : 50 kA E) MCCB for motor back up protection with spreader terminals
Type : DM 100 M
Thermal relay range : 32 Amp
No.of Poles : 03
Breaking Capacity : 50 Ka
Qty : 02 Nos for each Starter.
With spreader terminals
Make : L & T / Schider E) Starter:- Two No’s (FASD) having following specifications:
Make : L & T Type : MUG 20
Relay Range (13-21 ) Amp. Qty . 02 Nos. f) Auxillary Panal for Lighting etc with main MCCB 100 Amp, L&T/ Schnider/ Havells Make complete with 6 No’s ( 16 Amps 3 Nos & 6/10 Amp 3 Nos) of MCB’s for Heating and Lighting loads .
G) 3 Phase LED Digital Ammeter & Voltmeters of L & T/ Havells make with following features:
• Input voltage measurement range 50-520 V
• Inbulit selector switch • Flush mounting 96 x 96 mm ( 02 no)
viii) LED Digital Frequency Meter CI 0.2 of L & T / Havells make . 01 n
xi) Phase indicator lamps :3 No’s for incoming voltage/ monitoring of stabilized voltage in three different shades i.e Red, Green, Yellow.
The Job includes P/F of internal cabling in 16 Sq.mm PVC cables of Havells/ Polycab.
2
-
-
A ) P/F of SS Enclosure COS 200 Amp. Of L & T / Schnder / ABB make. On the panel board for power distribution to two No. of Panel .
2
-
-
P/F of Main MCCB 200 Amp, 4 pole, 50 Ka, D sine complete with Spreader terminals of L & T make. The Job includes P/F of spreader Kit 4 pole.
2
-
-
Providing, Installation, Testing & Commissioning 50 KVA voltage stabilizer of following specifications:
Type : Manually operated oil cooled.
Capacity :50 KVA
No. of phases : 3-phase 50Hz frequency.
Operating conditions :
Input : Input 100 volts + 10% to 220 V + 10% on 3- Phase AC supply
Output: 440 volts+ 10% 3-phase AC supply.
Terminals : 1. 3 Nos incoming terminals fabricated out of brass studs nuts and washers with porcelain insulators fitted on MS tank with dully drilled holes.
2. 4 Nos of outgoing terminals fabricated out of brass studs and washers with porcelain insulators fitted on MS tank with dully drilled holes.
Core: The voltage stabilizer shall be fitted with high permeability CRGO core for heat dissipation and the core strips shall be held together firmly as per norms and fitted on bracket of suitable size and thickness.
Coils: 3 Nos of copper wound coils which shall be fabricated out copper conductor with cotton taping. The coils shall be wounded in copper wire of proper gauge pitch and grade.
Voltage regulator: The voltage stabilizer shall be fitted with 6 steps stepping up voltage regulator (Disc type) having copper contact point.
Panel: The indicating panel shall be fitted on top side of voltage stabilizer fabricated out of suitable thickness MS sheet dully painted and fitted on the top cover through nuts and bolts and fitted with 2 Nos voltmeters and indicators.
Enclosure: The whole assembly shall be enclosed in MS tank of suitable thickness floor mounted with 4 No’s caster wheels. The tank shall be painted in two coats of enamel paint.
Coolant; Filled with “A” grade T oil upto top level. Note : Testing shall have to be done at any WSS where performance of voltage stabilizer will be checked for 7 days/ 4 days as per load compatible with said voltage stabilizer/ 40 KVA . Firm has to make transport arrangement for shifting voltage stabilizer after testing to the site / for operations.
3
-
-
Service line:- Providing and fitting of 35 mm Sq 3.5 core XLPE Armored Al cable Havells /polycab/ finolex make to be used as service line, laying underground where ever required from the control panel to the change over system etc. the job includes the cost of all types of men and machines required. The cable terminals for connections to switch gear at various requisite points shell be Aluminium thimbles of Dowel`s make and of appropriate size and connected by hydraulic crimp tool only.
100
-
-
Interconnections :-
Providing & Fitting of 25 mm square single core copper cable of Havells/polycab/finolex make for inter connections laying under ground wherever required from the control panel to the changeover, MCCB, Voltage stabilizer & other system. The job includes the cost of all types of men & machines required. The cable terminals should be crimpled with copper thimbles.
180
-
-
a) A)Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
2 Way Terminal Connector 20 Amp.
2 No MCB 8 Amp. The job shall include fabrication providing and fitting of Three arm MS/GI structure at the top each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2mm copper wire from each terminal connector to each holding arm.
The pole shall be mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” using 04 No anchor bolts of required size not less than 7” in length.
The complete job shall include Earthing in GI Electrode as per relevant IS Code
Make: Philips/Bajaj/skipper.
(ONE NUMBER) b)Providing installation testing and commissioning of area lighting 120 Watt LED (Street Light Type) ( 03 Nos).
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED shall have pressure die cast aluminium housing with power coated finish and having Ingress Protection up to IP-68.
The LED shall be properly fitted on the arm of the pole and connected to the copper wire as provided in item no A
Makes: SYSKA SSKSL-120, or equivalent in Havel’s A) C) Providing Laying and connection of 2Cx10 mm² XLPE Aluminium Armoured Cable from the connector of high mast pole to the stabilizer. The job includes underground laying or overhanging as per requirement and directions of the site in charge. As per site requirement.
Make: Havel’s/Gloster. D) Supply, installation testing & commissioning of DP, MCB of required size enclosed in steel enclosure with stand including cost of lugs, Cable Gland etc within the quarter.
3
-
-
Electrification of pump house:-
A)Power Invertor P/F of 12 volt 25 plate DC invertr battery of 150 AH along with 850VA inverter at the Operator room Job includes the cost of wiring and three number lighting points in 3/20 copper conductor with 9 Watt LED lamps fitted in holders along with the conduit: B) Operator Room Lighting: 1)Providing , fitting & testing of 8 number lighting points to operators room with lighting points in 2.5 sq mm PVC insulated copper wire including P/F of 5 Amp ON –OFF switches on Bakallite sheet, 16 watt power saver & all allied fixtures as required. The wiring shall be concealed
2)Providing & fitting of 03 number heating points to operators room in 4sq mm PVC insulated copper wire including P/F of 16 Amp SS Combineon Bakallite sheet. The wiring shall be concealed.
C) Pump House Luminaries: Providing, fitting & testing of flood lights for pump house with energy saving flood lights luminaries & high power cob LED light source & symmetric optics 30 watt LED (04 No.s), 5000K (Havells/Bajaj/Wipro/Phillips) make. The job includes all the required wiring & other required accessories complete in all respects.
D) Electric Fans: Providing & fitting of 02 number electric fans of ceiling/wall mounted type of USHA/CG/Havells make complete with regulator/ controlling switch, wiring in 2.5 sq mm PVC insulated copper wire.
E) Providing & fitting of Main Control Panel fitted with suitable capacity of MCB’s of heating & lighting points. The size of enclosure shall be as per site requirement/ size & number of MCBs required for both heating & lighting points and for controlling Power supply to external lighting loads and Hi mast .The Job include P/F of 6.00 Sq.mm PVC Cu cable from Modulor control panel upto the control panel.
1
-
-
Providing of heating Blower of reputed make.
3
-
-
Rubber matting:-
Providing and fitting of 6MM thick high density anti skid rubber floor matting on the machine floor level area including the floor surface area around power control panels and other gadgets.The job includes cleaning of the floor and the under surface of the matting removing dust,dirt,grease and loose sand grains if any .Applying the adhesive of sufficient high bonding strength both on the floor as well as on the under surface of the rubber matting for fixing.Size of matting is 1x2M of Jayoti/ Dunlop make.
100
-
-
Fabrication and Providing of 6’ x 4’ size MS angle Iron Framed worker’s sleeping bed made out of ISA 50 mm x 50 mm x 6 mm. The job shall include four no of legs 2’ long made out of equal iron ISA 50 mm x 50 mm x 6 mm with braces of MS flats 50mm x 4 mm, 2 no(1’ Long) for each leg and for central support,3 no’s (5’ long each) to be welded precisely with Advani electrodes as per requirement.
Job also includes P/F of 19 mm ply board of 6’ x 4’ size.
1
-
-
Providing & fitting of thermo col along with Excel matting for operators room of 15’x10’ size. Supplying of two number Quilts, two number Mattresses, two number pillows, two number Blankets for the employees in the operators room working during night shift. The job also includes providing & fitting of one number chargeable Light & providing of 4 number plastic chairs( Samrudhi / Neel Kamal, 01 number plastic table, for adults with a suitable table. & crockery items/ utensils and gas stove (01 no) with 05 kg gas cylinder as required for operators with all types of leads & carriages.
1
-
-
Providing of Cooking utensils/ crockery items comprised of Following:
Steel Plates 4 Nos
Steel Glass 4 Nos
Pressure Cooker/ Rice Cooker 1 No.
Steel utensils for food prepatation ( Medium Size) ( 2 No.)
Steel Utensils for Tea preparation ( 1 No.)
Cups ( 06 Nos)
Steel Spoon Big & Small Sizes ( 3 Nos Each Total 6 Nos)
Heater ( 02 Nos)
gas stove (01 no) with 05 kg gas cylinder as required for operators with all types of leads & carriages
1
-
-
Providing of tool kit consist of following items
Spanner set = 12 pieces of size 4/5,6/7,8/9,10/11,12/13,14/15,16/17,18/19, 21/23,24/26,24/27,30/32
Ring set = 12 pieces of same size as above
Pliers = 2 No`s (tappari /jalani) Cutting pliers = 2 No`s (tappari/jalani) Screw driver = 2 No`s (tappari/jalani) Hammer = 2 Nos. of size 1 kg &1/2 Kg
Pipe wrench = 2 Nos each of size 12 inches & 6 inches
Mutimeter = 1Nos of Phillips/Simens/L&T/Havells make
01 No. bamboo link rod of 6 mtr length
L- Key Set = 1 sets.
Tester = 1 No.
Canvass Bag.
1
-
-
Providing, installation, testing and commissioning of ‘Silent type” Diesel Generating of 25 KVA Rating and 3 Phase. The DG Set shall comprise of Diesel Engine and Alternator coupled together with heavy duty flexible coupling and mounted on M. S. Base Frame along with all standard accessories, Control Panel, Battery, M. S. Canopy, duly painted and conforming to noise reduction norms as per environmental protection rules 1986 as laid down by Ministry of Environmental (Protection) and Forest, read with GSR-371(E) Dated:17-05-2002 and GSR 520(E) Dated: 01-07-2003 in respect of emission norms for the engine and in respect of the noise level for the DG Set and as per the latest amendments if any. The engine shall conform to IS: 10000/BS:649/BS:5514 and ISO/3046.The DG Set should be rated for continuous duty with overload provision of 10% for the period not exceeding one hour in twelve hours.
A) ALTERNATOR:-
The alternator shall be self-excited, self-regulated for 25 KVA rating and shall be brushless, continuous duty. The alternator shall be screen protected drip proof enclosure, and horizontal foot mounted in double bearing construction. The alternator shall conform to IS-4722 / IEC-34 /IS-4889/BS-269(Acceptable Make Kirloskar/scafold/CG/Stamford)
a) Rated Output : 25KVA
b) Rated Speed : 1500 RPM
c) Efficiency at full load 0.8 P.f. = Not less than 93.50% or as per relevant IS code.
d)total distortion factor shall not be greater than 3%
e) Voltage : 415 V at 50 Hz
f) Class of Insulation : H
g) Enclosure: IP 23.
C) DIESEL ENGINE (Prime Mover)
The Prime Mover shall be diesel driven to develop requisite BHP as per ISO-8528-part- I at 1500 RPM for the alternator rated as above with ambient temperature ranging from -10C to +45C with 70% humidity.(Acceptable Make Kirloskar/Cummins/Caterpiller)
a) Speed :1500 RPM
b) Aspiration : Turbocharged
c) Cooling System : Water Cooled
d) Method of Start: Electric Start with a Key.
e) Rated BHP : Suitable for 25KVA rating output at NTP
The engine shall be fitted with following accessories:
1) Fuel Tank:
The capacity of the fuel tank shall be so as to last for 12 hours of continuous running on full load. The fuel tank shall be mounted on an angle iron frame of suitable height and fabricated out of M.S. Sheet of 4 mm Thickness duly painted and fitted with connections for inlet, outlet and return and also to be provided with air vent, drain with valve, level indicator and fuel pipes complete in all respects.
2) Battery:
Suitable No.12 Volt Lead acid Batteries Terminals, Leads, C/W Charging Dynamo and fitted with 12 Volt Starting System.
3) Engine Instrument Panel:
The Engine Instrument Panel shall be fitted with starting switch with keys, Lube Oil Gauge, Temperature & Pressure Gauge, Speedometer, Kilowatt Hour Meter etc and all other accessories as required.
4) Tools & Spares:
Standard Set of Tools and Spares for maintenance.
5) Safety Control:
The D.G. Set shall be provided & fitted with all the safety controls i.e. for Low lube oil Pressure indication switch, High water temperature indication, RPM indication, water temperature indication, battery charging indication etc.
D. Standard Control Panel:
The Control Panel shall be fabricated out of steel sheet 1.5 mm thick duly pretreated and aesthetically finished. It shall be totally enclosed, dust, vermin proof with IP-53 degree of protection as per IS 2147-62. The panel shall consist of following instruments:
a) 0 – 600 V, AC Voltmeter of class 1.5 accuracy with phase selector switch
b) A.C. Ammeter of Class 1.5 accuracy.
c) HRC Fuses of required rating.
d) One No MCCB of required rating.
e) Frequency Meter.
f) Power factor meter.
g) Pilot Lamps
h) Push Button Switch for ON-OFF operation.
All the above components shall be properly mounted duly wired and shall be of reputed make.
D)Canopy:
The Canopy of the D. G. Set shall be fabricated out of M. S. Sheet of required gauge so as to withstand the snow load etc, duly painted. The Canopy shall be as per the Norms of the as laid down in the environmental protection rules 1986 of Ministry of Environmental (Protection) and Forest, read with GSR-371(E) Dated:17-02-2002 and
GSR 520(E) Dated: 01-07-2003 in respect of emission norms for the engine and in respect of the noise level for the DG Set and as per the latest amendments if any
E) Battery Charger for charging 12 Volts battery complete with Wiring and 2 pin socket and battery terminals. F) The firm has to provide 50 litres of HSD with plastic can for testing of DG set.
1
-
-
P/F of rubber sleeve for safe guarding cable .
100
-
-
Providing/fitting of aluminium /GI cable tray of suitable size width not less than 4 inch, to accommodate cables & wiring inside operators quarter & machine room. Job includes P/F of all types of accessories & fixtures nuts & bolts & angle holders etc.
150
-
-
P/F of Al thimbles 25 Sq.mm ( 20 Nos)
P/F of Al Thimbles 35 Sq.mm ( 15 Nos)
P/F of Cu Thimbles 25 Sq.mm ( 20 Nos)
P/F of Cu Thinbles 35 Sq.mm ( 15 Nos)
P/F of Tap rolles at necessary terminations ( 15 Nos)
1
-
-
Providing of Sintex make 500 Ltrs Capacity Tank to be kept at site in the premises close to the pump station for safety purposes complete with 2 No. of Buckets 20 Lts capacity of Simrudi make for FIRE SAFETY.
1
-
-
Providing of HT safety hand Gloves.
2
-
-
Providing of Submersible Pump controller for Max. Motor Output for 20 HP at 415 V, 3 Ph with following features:
Relay range : (13-21 ) Amp
Protection offered – Overload, single phasing, phase reversal , phase imbalance.
Auto Restart Features
Vibration proof enclosure withIP 54 protection Class
Indiations offered – ON/OFF, Voltage and Ampere
Make : L & T/ Havells/ Schinder. ( Standbye)
2
-
-
Providing of Submersible Pump controller for Max. Motor Output for 30 HP at 415 V, 3 Ph with following features:
Relay range : (30-50 ) Amp
Protection offered – Overload, single phasing, phase reversal , phase imbalance.
Auto Restart Features
Vibration proof enclosure withIP 54 protection Class
Indiations offered – ON/OFF, Voltage and Ampere
Make : L & T/ Havells/ Schinder. ( Standbye)
2
-
-
Facilitiies for Operational Staff
P/F of 25mm GI fitting to connect the Geaser from Water Tank .
P/F of 25mm Dia GI fitting to connect the Geaser to service points 2 Nos. ( One No. for inside of bathroom and other to be taken upto the wash sink.)
P/F of Bends, taps of reputed make ( 2 Nos) and other Valves / parts for making GI fitting functional.
P/F of 50 Ltr Capacity Geaser(racold/venus) to be fitted on bathroom Wall complete with fixtures.
P/F of 500 Ltr capacity of Sintex make on Top of bathroom.
P/F of 25mm Dia GI fitting for input connection from tapping point to Water Tank comple with all Valves , bends etc.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements