Public Health Engineering Department Tender

Providing ,supplying ,lowering,laying,jointing ,hydraulic testing and commissioning of PE -100,PN-10 HDPE Pipes in standard lenghts conforming to IS:4984/1415/12786/13488-1 with necessary joining material and all kinds of pipe specials including transportation,Freight charges,inspection charges loading unloading charges,conveying to departmental store,joining procedure as per relevent IS Code complete with materials for jointing procedure with all labours as directed by Engineer In Charge as per IS 7634-Part -2 Hydraulic testing to specified pressures(including cost of all materials labour and water/for specified lenghts inclusive of all kinds of taxes and carriage complete

25 mm dia HDPE pipe

20 mm dia HDPE pipe

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling manually/ mechanically including stacking of serviceablematerial and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: Bituminous road.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing of different Pipe Specials of standard make as directed by Engineer-in-Charge i/c all carriages complete job (The rates of pipe specials will be paid as per below 100 mm G.I Bend @ Rs. 1500/NO, 100 mm G.I Equal tee @ 1200/NO,100 mm G.I Union @ 700/NO,100-80 mm G.I reducer socket @ 300/NO,100-65mm G.I reducer socket @ 300/NO,100x 100x80 mm G.I l tee @ 700/NO,100x100x65 mm G.I l tee @ 600/NO,100x100x50 mm G.I tee @ 550/NO,100 x 100 x 40 mm Tee @540/NO,100 x 100 x 25 mm Tee @520/NO,100 x 100 x 20 mm Tee @520/NO,100 mm G.I Elbow @400 /NO,80 mm G.I Union @619/NO,80-65 Reducer Socket @300/NO,80-50 mm Reducer Socket @250/NO,80 mm G.I Elbow @430/NO,80 x 80 x 50 mm Tee @ 300/NO,80 x 80 x 40 mm Tee @ 250/NO,80 x 80 x 25 mm Tee @ 250/NO,80 x 80 x 20 mm Tee @ 250/NO,65 mm G.I Union @ 475/NO,65 x 65 x 20 mm Tee @ 230/NO,65 x 65 x 25 mm Tee @ 230/NO,65 x 65 x 40mm Tee @ 240/NO,65-50 Reducer Socket @ 200/NO ,65 mm G.I Union @ 253/NO,50 mm G.I Elbow @ 200/NO,50 x 50 x 20 mm Tee@ 230/NO,50 x 50x25mm Tee@ 235/NO,50 x 50x40 mm Tee@ 240/NO,50 mm Equal Tee @ 250/NO,50-40 Reducer Socket@ 150/NO,40 mm G.I Union @ 180/NO,40 mm G.I Elbow @ 130/NO,40 x 40 x 20 mm Tee @ 200/NO,40 x 40 x 25 mm Tee @ 200/NO,40-25 Reducer Socket@ 150/NO,40-20 Reducer Socket@ 150/NO,25 mm G.I Union @ 120/NO,25 x 25 x 20 mm Tee @ 130/NO,25 mm Equal Tee @ 110/NO,20 mm Equal Tee @ 100/NO,20 x 20 x 15 mm Tee @ 80/NO,15mm push cock @ 60/ NO,20mm G.I Elbow @ 60/ NO,25mm G.I Elbow @ 60/ NO,20 mm G.I Nipple @ 40/NO, 25mm nipple @ 50/NO.

Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement) Up to 300 mm dia.@ Rs 7823.70 per Qtl and Over 300 mm dia @ Rs 8225.10 per Qtl,

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Carriage of material from source upto actual site of work by mechanical means incl. loading, unloading and stacking complete.

cement & steel from nearest source for an avg. lead of 15kms.

Sand & Stone aggregates for an avg. lead of 16 kms.