Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Civil And Construction
Building Construction
Eprocure
Opening Date8 Nov 2024
Closing Date26 Nov 2024
Tender Amount₹ 1,53,76,000
Costs
EMD
₹ 3,07,520Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Construction Of 0.50 Lac Gallon Capacity Over Head Tank Jacketting And Cleaning Of Rectangular Collection Sump, Jacketting And Cleaning Of Circular Collection Sump, Renovation Of Existing Quarter Construction Of New Washroom, Dismantling Demolis
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_263887_2Tender No
FRESH E-NIT No.14/WSMP of 11-2024, Date-08/11/2024Tender Authority
Public Health Engineering Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil :
1
256
256.85
Providing and laying of dry stone soling in foundation/trenches hand packed and consolidated by hand ramming. (Subject to actual quantities during execution).
1
1320
1320
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: i. 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
1
4826
4826.5
ii. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1
5202
5202.9
iii. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
5733
5733.6
iv. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
1
6540
6540.45
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
7788
7788.4
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9395
9395.7
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9821
9821.85
Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
10377
10377.15
Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centering, shuttering, finishing and reinforcement with: i. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9588
9588.05
Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
1
9023
9023.35
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. i. All works upto plinth level.
1
8021
8021.1
ii. All works above plinth level upto floor V level.
1
9412
9412.05
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
1
280
280.95
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein at 5Qtl. Per Cum .
1
941
941
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. i. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
1
98
98.8
Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified grade concrete mix, diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embeded in the pile cap etc. all complete including removal of excavated earth with all lifts and leads(Length of pile for payment Shall be measured from top of shoe to the bottom of pile cap) By percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, i. 450 mm dia piles
a. M-25
1
1941
1941.9
b. M-30
1
1957
1957.55
c. M-35
1
1973
1973.3
ii. 500mm dia Piles
a. M-25
1
2275
2275.5
b. M-30
1
2294
2294.8
c. M-35
1
2314
2314.25
iii. 600mm dia Piles
a. M-25
1
3095
3095.25
b. M-30
1
3123
3123.1
c. M-35
1
3151
3151.1
iv. 750mm dia Piles
a. M-25
1
4693
4693.95
b. M-30
1
4737
4737.4
c. M-35
1
4781
4781.1
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor pile method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer-inCharge. i. Single pile upto 50 tonne safe capacity a. Initial test (Test Load 2.5 times the safe capacity)
1
159533
159533
b. Routine test (Test Load 1.5 times the safe capacity)
1
175486
175486.6
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
1
167
167.8
Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered): i. Depth not exceeding 1.5 m.
1
127
127.1
ii. Depth exceeding 1.5 m but not exceeding 3 m
1
134
134.45
iii. Depth exceeding 3 m but not exceeding 4.50 m
1
146
146.55
Centering and shuttering including strutting, propping etc. and removal of form for: i. Foundations, footings, bases of columns etc. for mass concrete.
1
286
286.35
ii. Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
1
628
628.95
iii. Suspended floors, roofs, landings, balconies and access platforms.
1
718
718.2
iv. Lintel, beams, plinth beams, girders, bressumers and cantilevers
1
577
577.55
v. Columns, pillars, piers, abutments, posts and struts.
1
742
742.55
vi. Stairs (excluding landings) except spiral staircases.
1
851
851.15
vii. Spiral staircases (including landings)
1
676
676.25
viii. Arches, domes, vaults upto 6 m span
1
2281
2281.2
ix. Extra for arches, domes, vaults exceeding 6m span
1
1118
1118.85
x. Chimney and shafts
1
628
628.95
xi. Extra for shuttering in circular work (20% of respective centering and Shuttering items) Walls
1
125
125.79
xii. Small surfaces such as cantilever ends, brackets and end of steps, caps and bases to pilasters and column and the like.
1
1027
1027.4
xiii. Extra for shuttering in circular work (20% of respective centering and Shuttering items)
1
1027
1027.4
xiv. Edges of slabs and breaks in floors and walls.
1
262
262.2
xv. Edges of slabs and breaks in floors and walls a. Under 20 cm wide
1
262
262.2
b. Above 20 cm wide
1
145
145.1
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured). i. Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
1
293
293.9
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level i. Thermo-Mechanically Treated bars of grade Fe-500D or more.
1
123
123.2
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
1
120
120.8
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. i. Welded
1
138
138.2
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. i. Hot finished welded type tubes
1
156
156.95
ii. Hot finished seamless type tubes
1
171
171
iii. Electric resistance or induction butt welded tubes
1
142
142.9
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. i. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.
1
141
141.4
ii. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
1
181
181.6
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. i. M.S. tube
1
161
161.05
ii. E.R.W. tubes
1
154
154.7
iii. G.I. pipes
1
197
197.45
i. Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1
706
706.5
ii. Ridges Plain (500-600mm)
1
508
508.7
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. i. 0.50 mm thick with zinc coating not less than 275 gram/m2
1
690
690.85
Providing and fixing plained eaves boarding. i. 2nd class kail wood (300x40 mm (nominal size).
1
1007
1007.5
Providing and fixing of 0.5mm colour G.S Sheet Sofit boarding including Backing, Supports etc. Complete job.
1
600
600
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
1
218
218.4
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete
1
1204
1204.5
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. i. 40mm thick with 20 mm nominal size stone aggregate
1
510
510.25
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : i. Cement mortar 1:6 ( 1 cement : 6 coarse sand)
1
7571
7571.55
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.
1
1455
1455.65
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):
i. Kiln seasoned and chemically treated hollock wood
1
74353
74353.45
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. i. Kiln seasoned and chemically treated hollock wood (35mm thick)
1
3091
3091.7
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
i. Second Class kail wood
1
2305
2305.7
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : i. Kiln seasoned and chemically treated hollock wood (35mm thick)
1
3086
3086.95
Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : i. 5.0mm thick glass panes
1
1210
1210
6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand).
1
241
241.25
12mm Cement plaster finished with a floating coat of neat cement of mix: i. 1 : 3 ( 1 cement : 3 fine sand)
1
370
370.75
ii. 1 : 4 ( 1 cement : 4 fine sand)
1
353
353.1
15mm Cement plaster on the rough side of single or half brick wall of mix: i. 1 : 4 ( 1 cement : 4 fine sand)
1
327
327.85
ii. 1 : 6 ( 1 cement : 6 fine sand)
1
306
306.85
Extra for plastering exterior walls of the height more than 10m from ground level for every additional height of 3m or part thereof.
1
71
71.55
Extra for plastering i. Spherical Ceiling
1
141
141
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm).
1
98
98.75
Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete. i. Serrated with central bulb (225 mm wide, 8- 11mm thick)
1
283
283.25
Applying priming coat: i. With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
1
64
64.6
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
1
66
66.86
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
1
136
136.75
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
i. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
1
194
194.65
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. i. 1 mm thick
1
138
138.1
ii. 2 mm thick
1
181
181.05
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
i. Two coats
1
86
86.65
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. i. New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1
157
157.3
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
1
1229
1229.1
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
1
1106
1106.05
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. s required.
i. Upto 450mm Sweep
1
450
450
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. i. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
1
5493
5493.25
Providing and fixing C.P. brass bib cock of approved quality. i. 15 mm nominal bore (long nose).
1
334
334.7
Providing and fixing gyser of capacity 25Ltr. Of quality make (Havells, Haquar, Crompton etc. including all required fittings and accessories complete Job).
1
8000
8000
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : i. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
1
4172
4172.4
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
1
129
129.1
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
1
1474
1474.15
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1
8
8.75
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.
i. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. a. PN-16 pipe , 25mm OD(SDR-7.4)
1
519
519.75
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : i. 100 mm inlet and 100 mm outlet
a. Sand cast iron S and S as per IS:3989
1
1556
1556.4
Providing and fixing PTMT Bottle Trap for Wash basin and sink: i. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.
1
596
596.3
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: i. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
1
731
731.25
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : i. Kitchen sink with drain board 18.11.1.1 510x1040mm bowl depth 250mm
1
6166
6166.9
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
1
582
582.35
Providing and fixing PTMT stop cock of approved quality and color. i. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms.
1
203
203.55
Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
1
63
63
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. i. Using M.S. angles 40x40x6mm for diagonal braces
1
5493
5493.9
ii. Using flats 30x6mm for diagonal braces and central cross piece.
1
5338
5338.5
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters. i. 80x0.90 mm M.S. laths with 0.90 mm thick top cove
1
2916
2916.1
Providing and fixing ball bearing for rolling shutters.
1
531
531.55
Supply, installation, testing and commissioning of Advanced Maintenance Free environment friendly earthing system consisting of 1 No. of 3 Mtr. Length 17.2mm dia UL certified earth electrode made of high tensile low carbon steel circular rods, molecularly bonded copper on outer surface (minimium copper bonding thickness – 250 microns) with GI terminals to connect incoming strips (Environment friendly backfill compound duly certified as per ANSI / NSF standard 60/Toxic content certificate as safe for use near potable ground water resources strictly as per specification enclosed. Make : Shree Electrodes / OBO Bettermann / Erico (2 No. UPS and 4 No. Main L.T Panel / 2 No. Fire Fighting Panel). i. Earth pit chamber (300mm x 300mm) with CI cover for the above.
1
15800
15800
Providing and fixing of 25mm x 5mm Copper Strip in 40mm dia GI Pip FRL earth Electrode including connection with brass nut, bolt, spring, washer, excavation and refilling etc. as required.
1
1224
1224
Supply, installation, testing and commissioning of lightening conductor made of 25mm dia 300mm long copper tube having single prong at top with nase plate
1
1500
1500
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
1
207
207.35
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : i. 250x10 mm
1
373
373.35
ii.100x10mm
1
159
159.85
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
i. 125 mm
1
68
68
ii. 100 mm
1
60
60
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: i. 2nd class teak wood ( 50 x 12 mm).
1
214
214.75
Providing and installing of PVC pipes (working pressure 4kg/cm2) single socketed pipe 110mm /80mm dia with all necessary arrangements and fittings including Tee’s, Elbows and End Caps wherever required complete job.
1
427
427
Providing and fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete hob as directed by Engineer – Incharge.
1
800
800
Providing and carrying out wiring for heating points with 4.0Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combine S&S 16Amp along wit the modular plate, suitable GI box and erarthing the point with 2Sqmm FRLS PVC insulated copper conductor single core cable etc. As required (including the cost of conduit).
1
1400
1400
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: i. 1:3:6 or richer mix (i/c equivalent design mix)
1
1725
1725.2
ii. 1:4:8 or leaner mix (i/c equivalent design mix)
1
1064
1064.55
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: i. In cement mortar
1
1458
1458.45
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : i. Of area of 3 sqm. and below
1
285
285.25
ii. Of area beyond 3 sqm
1
390
390.5
Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : i. Of sectional area 40 sqcm. and above.
1
3488
3488.65
ii. Of sectional area below 40 sqcm.
1
13
13.95
Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge:
1
2
2.8
Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet
disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. Complete.
1
125
125.35
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth if necessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete (cost of sludge, manure or extra earth to be paid for separately)
1
225
225.65
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) (Midium Class)
i. 15 mm dia. nominal bore
1
206
206.5
ii. 20 mm dia. nominal bore
1
225
225.2
iii. 25 mm dia. nominal bore
1
339
339.25
iv. 32 mm dia. nominal bore
1
411
411.3
v. 40 mm dia. nominal bore
1
489
489.25
vi. 50 mm dia. nominal bore
1
805
805.7
vii. 65 mm dia. nominal bore
1
1018
1018.05
viii. 80 mm dia. nominal bore
1
1151
1151.2
ix. 100 mm dia. nominal bore
1
1434
1434
x. 150 mm dia. nominal bore
1
2256
2256.9
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
i. 65 mm nominal bore
1
1646
1646.05
Supply installation testing and commissioning of non returning valve.
i. 65mm dia
1
4500
4500
Providing, fabricating, fixing of M.S fittings viz bends of suitable degrees / size to be fabricated out of 8mm to 10mm thick MS. plate as per the requirement of site. This item includes cost of lead, spun yarn, R.I. cloth and lead caulking, lead beating with insertion of spun yarn etc. The fittings should be leak proof and should be painted with Anticorrosive Red Oxide Primer and incld. all carriages, leads lifts, etc. complete.
1
260
260
Providing and fixing D.I. Slucie Valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately confirming to IS:14846 read with latest amendments.
i. 65mm dia Class 1
1
17000
17000
ii. 80mm dia Class 1
1
19000
19000
iii. 100mm dia Class 1
1
20000
20000
iv. 125mm dia Class 1
1
22000
22000
v. 150mm dia Class 1
1
30000
30000
vi. 200mm dia Class 1
1
40000
40000
vii. 250mm dia Class 1
1
60000
60000
viii. 300mm dia Class 1
1
80000
80000
ix. 350mm dia Class 1
1
100000
100000
Providing and laying flanged C.I. / D.I standard specials such as tees, bends, collars, tapers, caps etc ., suitable for flanged jointing as per IS : 1538 i. Up to 300 mm dia.
1
8539
8539.2
ii. Over 300 mm dia.
1
8806
8806.75
Providing, fixing of M.S flanges by welding including cost of cutting making both holes made out of 10/14mm thick M.S plate to the pipes of different dia’s and including cost of nuts, bolts, washers etc. (Complete Job).
i. 65mm dia
1
900
900
ii. 80mm dia
1
950
950
iii. 100mm dia
1
1100
1100
iv. 125mm dia
1
1200
1200
v. 150mm dia
1
1300
1300
vi. 200mm dia
1
1400
1400
vii. 250mm dia
1
1800
1800
Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
i. 75x63x3.2 mm
1
78
78.2
ii. 100x63x4 mm
1
106
106.85
Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connecitons but excluding modular plate etc. as required.
i. 5/6A Switch
1
103
103
ii. 3 Pin 5/6A Socket outlet 6Amp
1
122
122
iii. 3 Pin 5/6A Socket outlet 16Amp
1
156
156
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. i. Made of G.I. wire of dia 4 mm
1
809
809.9
Providing and fixing G.I. Pipes complete with G.I. fittings excluding trenching and refilling etc. (external work).
i. Midium class double flanges with gasket 65mm dia nominal bore (GI Inlet Pipe from OHT to Collection Chamber).
1
1018
1018.05
ii. Midium class double flanges with gasket 80mm dia nominal bore (GI Suction Pipe from Collection Chamber to borewell / tube well).).
1
1151
1151.2
Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming to IS : 8329 i. 100 mm dia Ductile Iron Double Flanged
1
1530
1530.6
ii. 150 mm dia Ductile Iron Double Flanged
1
2295
2295.65
Providing and laying D.I. Specials of Class K-12 suitable for mechanical jointing as oer IS:9523
i. Upto 600mm dia.
1
17971
17971.65
Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.
1
2516
2516.85
Steel reinforcement for R.C.C. work ready to use "cut and bend"rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. i. Thermo-Mechanically Treated bars of grade Fe-500D or more
1
116
116.25
Providing and fixing ventilator of size 450mm x 450mm made out of angle iron 40mm x 40mm with wire mesh of 25mm x 25mm size including welding charges and including all carriages upto site of work.
1
1500
1500
Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete
1
346
346.7
Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge i. Anodized (AC 15) aluminum
1
89
89.15
Providing and installing 8W Round Led Ceiling Light Complete Job.
1
250
250
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :
1
91
91.75
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : i. 150x10 mm
1
83
83.8
ii. 200x10 mm
1
95
95.35
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 meters lead as per direction of Engineer-in-charge :
i. Above 40 mm nominal bore
1
121
121.65
Carriage of material by mechanical transport including loading, unloading, stacking of material.
B. Sand
i. For an avg. lead of 3Kms.
1
165
165.84
ii. For an avg. lead of 4Kms.
1
183
183.58
iii. For an avg. lead of 5Kms.
1
200
200.74
iv. Beyond 5Kms upto 10Kms per Km
1
15
15.66
v. Beyond 10Kms upto 20Kms per Km
1
13
13.09
vi. Beyond 20Kms per additional Km
1
11
11.04
C. Aggregate below 40mm
i. For an avg. lead of 3Kms.
1
165
165.84
ii. For an avg. lead of 4Kms.
1
183
183.58
iii. For an avg. lead of 5Kms.
1
200
200.74
iv. Beyond 5Kms upto 10Kms per Km
1
15
15.66
v. Beyond 10Kms upto 20Kms per Km
1
13
13.09
vi. Beyond 20Kms per additional Km
1
11
11.04
D. Aggregate above 40mm
i. For an avg. lead of 3Kms.
1
180
180.26
ii. For an avg. lead of 4Kms.
1
199
199.55
iii. For an avg. lead of 5Kms.
1
218
218.19
iv. Beyond 5Kms upto 10Kms per Km
1
17
17.03
v. Beyond 10Kms upto 20Kms per Km
1
14
14.23
vi. Beyond 20Kms per additional Km
1
12
12
E. Stone Soling:
i. For an avg. lead of 3Kms.
1
195
195.1
ii. For an avg. lead of 4Kms.
1
215
215.98
iii. For an avg. lead of 5Kms.
1
236
236.16
iv. Beyond 5Kms upto 10Kms per Km
1
18
18.43
v. Beyond 10Kms upto 20Kms per Km
1
15
15.4
vi. Beyond 20Kms per additional Km
1
12
12.98
F. Steel / CGI Sheets:
i. For an avg. lead of 3Kms.
1
147
147.41
ii. For an avg. lead of 4Kms.
1
163
163.19
iii. For an avg. lead of 5Kms.
1
178
178.43
iv. Beyond 5Kms upto 10Kms per Km
1
13
13.92
v. Beyond 10Kms upto 20Kms per Km
1
11
11.63
vi. Beyond 20Kms per additional Km
1
9
9.81
G. Earth:
i. For an avg. lead of 3Kms.
1
207
207.3
ii. For an avg. lead of 4Kms.
1
229
229.48
iii. For an avg. lead of 5Kms.
1
250
250.92
iv. Beyond 5Kms upto 10Kms per Km
1
19
19.58
v. Beyond 10Kms upto 20Kms per Km
1
16
16.36
vi. Beyond 20Kms per additional Km
1
13
13.8
H. Cement:
i. For an avg. lead of 3Kms.
1
147
147.41
ii. For an avg. lead of 4Kms.
1
163
163.19
iii. For an avg. lead of 5Kms.
1
178
178.43
iv. Beyond 5Kms upto 10Kms per Km
1
13
13.92
v. Beyond 10Kms upto 20Kms per Km
1
11
11.63
vi. Beyond 20Kms per additional Km
1
9
9.81
I. Sand:
i. For an avg. lead of 50Mtr.
1
200
200.67
ii. Beyond Ist 50Mtr.
1
43
43.69
J. Aggregate below 40mm:
i. For an avg. lead of 50Mtr.
1
200
200.67
ii. Beyond Ist 50Mtr.
1
43
43.69
K. Aggregate below 40mm and above:
i. For an avg. lead of 50Mtr.
1
216
216.94
ii. Beyond Ist 50Mtr.
1
47
47.23
L. Stone Soling:
i. For an avg. lead of 50Mtr.
1
263
263.08
ii. Beyond Ist 50Mtr.
1
51
51.4
M. Steel / CGI Sheets:
i. For an avg. lead of 50Mtr.
1
249
249.61
ii. Beyond Ist 50Mtr.
1
36
36.63
N. Earth:
i. For an avg. lead of 50Mtr.
1
200
200.67
ii. Beyond Ist 50Mtr.
1
43
43.69
O. Cement:
i. For an avg. lead of 50Mtr.
1
116
116.22
ii. Beyond Ist 50Mtr.
1
17
17.05
Mechanical / Electrical Part Supply, installation testing and commissioning including packaging handling, transporting storage) of centrifugal horizontal type pump having cast iron body, stain less steel impeller, stainless steel shaft and capable of delivering 29000LPH (29M3/Hr) total head of 39M as per IS:1520 complete with necessary ‘Y’ strainer on the suction side and pressure guage IS: 3624 with GM cocks on the delivery side squirrel cage induction motor of rating 10HP synchronous speed of 2900/3000rpm) totally enclosed fan cooled type suitable for 415 Volt + 15%, 3 phase, 50Hz A.C supply of suitable for the above pump coupled with flexible coupling including earthing as per relevant Indian Standard and specification. F Class insulation IP55 Common bed plate for mounting pump and Motor fabricated os suitable MS Channel as per manufacturer’s recommendations, power cable of 50Mtrs.
1
160000
160000
Supply, installation testing and commissioning including packaging handling, transporting storage) of bore well submersible pump set having stainless steel impeller, stainless steel shaft & capable of delivering 290000LPH(29M3/Hr) total head of 63M with motor of rating 15 HP synchronous speed of 2900/3000rpm) totally enclosed fan cooled type suitable for 440 Volt + 15%, 3 phase, 50-60Hz A.C with 50Mtrs power cable.
1
93450
93450
Supply, fitting and laying of G.I / D.I double flanged Enlarger Do x 80mm (Do: diameter of outlet size of pump)
1
1228
1228.92
Supply, fitting and laying of G.I / D.I double flanged Enlarger Do x 65mm (Do: diameter of delivery flange size of pump)
1
1228
1228.92
Supply, fitting and laying of GI/DI Equal Tee 65x65x65
1
768
768.08
Supply, fitting and laying of G.I / D.I Double flanged 900 bend 80mm
1
4000
4000
Supply, fitting and laying of G.I / D.I Double flanged 900 bend 65mm
1
2100
2100
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
1
1249
1249.1
Supply, installation, testing and commissioning of anti lightening copper conductor at top of crown of OHT / structure of approved quality complete 25mm x 5mm copper strip in 40mm dia GI Pipe FRL earth electrode including connection with brass, nut, bolt, spring, washer, excavation and refilling etc. As required as per IS:2309.
1
41000
41000
Supply, installation, testing and commissioning (including packaging, handling, transportation, insurance, storage and inspection and testing at bth manufacturers works) installation, testing and commissioning at site of LT panel IP 42 the board shall be painted after seven tank chemical shade 7035 siemen grey powder thinckness should not less than 60micron. 25x6flat gasket provided insidedoors, all indicating lights shgall be LED type and 22.5mm push button,. All digital meters shall be flush mounted, main frame 2mm CRCA and door and cover 1.6CRCA, gland plate 3mm CRCA system voltage 415V, 3 phase, cable entry button, colour RAL 7035, phase bus bar AL, netural bus bar AL complete Electrical panel with star delts starter 10HP 2 No. And 7.5HP 1 NO. And Misc 1 No. Each MCCB / MCB, indicator 3 No’s, Busbar 150Amp, changeover 150Amps, MCCB 150AMps.
1
200000
200000
Supply, installation, testing and commissioning of oil cooled distribution transformer of capacity 30KVA 3 phase input voltage 23V cooling type oil colled frequency 50Hz.
1
120000
120000
Supply, installation, testing and commissioning DG 30KVA supply (including packaging handling transportation, insurance, storage and inspection & testing at the manufacturer’s works), installation, testing and commissioning at site of 3 phase, electric silent generation sets, consisting of water cooled diesel enginer, producing required BHP under normal temperature pressure condition having four cylinders, 12 volt electric start arrangement naturally aspirated coupled to 30KVA, 3 phase, 415V 0.8power factor, 50Hz alternaters on a common base frame complete with control panels, starting battery with leads, fuel tank and sound proof acoustic enclosure and other accessories of following capacities. The display unit meters of panel and alternator control system should be digital with RS-485 port for communication to PLC/SCADA.
1
800000
800000
Supply and installation (including packing handling insurance storage and inspection and testing at the manufacturers works) of 3phase servo stablizer of capacity 30KVA with Automatic type with input voltage range 180-460 Volts, power factor 0.8, output voltage 415 volts ± 1%
1
138253
138253.5
Supply, installation, testing and commissioning as per IS:3043 with coating thickness 80-100 usage / application grounding earthing model thickness 2mm.
1
12289
12289.2
Supply, installation, testing and commissioning LED Flood light lumianire equiped with specially designed heat sink, high performance electronic driver ensures zero, maintenance, high surge protection 4KV, avg. Life L70B50:50000 hrs operating temperature -100C to +450C power 50W, Flux 4250lm, dimension 220x50x311, weight 1.8Kg.
1
1996
1996.99
Supply, installation, testing and commissioning Aesthetically designed higher wattage LED bulb for B22 lamp base, input voltage: AC-220-240Voltage, 50/60Hz, driver type integral, Lumen output 1060lm.
1
184
184.34
Supply and fixing of PVC conduit of size 25mm for cable laying
1
3072
3072.8
Supply, installation of saddle block 235mm for fixing of conduit pipes.
1
153
153.61
Supply and fixing of 8 way gang box.
1
153
153.61
Supply and fixing of 6AMp switch.
1
115
115.21
Supply, laying and termination of 2.5Sqmm for lighting.
1
53
53.76
Supply and installation (incl Packaging handling insurance storage and inspection and testing at the manufacture's work) of gate / sluice valve C.i / D.I 150mm flange drilled holes as per IS: 14846 (CWM from near by source line)
1
30723
30723
1 inch and 1.5inch for fixing of electric fixtures.
1
92
92.71
Supply and fitting of pandent holders for fixing of LED bulbs.
1
76
76.8
Supply and fitting of dimmer for control of ceiling fan.
1
384
384.04
Supply and fitting of 6 Amp 3-pin socket
1
384
384.04
Supply and fitting of Square Block for fixing of Switch, Sockets.
1
307
307.23
Main LT from transformer to panel viastablizer cable size = 3%1/2 core = 35mm
1
537
537.65
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular plate, suitable GI box and earthing the point with 1.5Sqmm FRLS PVC insulated copper conductor single core cable etc. As required. (Group B)
1
1182
1182
Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.
i. 2x1.5Sqmm + 1x1.5Sqmm earth wire.
1
233
233
ii. 2x2.5Sqmm + 1x1.5Sqmm earth wire.
1
275
935
Supply and fixing of following sizes of medium Class PVC Conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required (32mm)
1
184
190
Supply and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. As required. i. 5/6 A Switch
1
103
103
ii. 3-Pin 5/6 A Socket Outlet
1
122
122
iii. 15/16 A Switch
1
156
156
iv. 6-Pin 15/16A Socket Outlet
1
197
197
Supplying and fixing of two module stepped type electronic fan regulator on the existing plate switch box including connections but excluding modular plate etc. As required.
1
369
369
Providing and fixing extra conduit down rod of 20mm dia, 2x10cm length, wiring with 2x1.5Sqmm FRLS PVC insulated, copper conductor, single core cable including painting etc. S required (Note: More than 5cm length shall be rounded to the nearest 10cm and 5cm or less shall be ignored).
1
55
55
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30cm) with 1.5Sqmm FRLS OVC insulated, copper conductor, single core cable etc. As required.
1
213
213
Numbering of ceiling fan / exhaust fan/ flurescent fittings as required.
1
57
57
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. As required. Upto 450mm Sweep.
1
450
450
Providing and fixing of following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections etc. As required. i. 32A TP&N
1
2152
2152
ii. 63A TP&N
1
3144
3144
Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240V on surface / recess, complete with tinned copper bus bar, neutral bar, earth bar, din bar, interconnections, powder painted including earthing etc. As required (But without MCB/MCCB/Isolator) i. 6 Way, Double door
1
2206
2206
Providing and installing of 8W rounded Led Ceiling Light Complete Job
1
250
250
Providing and installing of 200mm Exhaust Fan (Cut out size : 9.4 x 9.4 Square inchs / Watt: 32 / RPM: 1350 / Air Delivery: 520 / Suitable for sitchen, Bathroom and office.
1
1300
1300
Providing and installing electric ceiling fan / 1200mm BEE star rates ceiling fan.
1
1500
1500
O&M O&M for Ist Year ( After Completion of DLP)
1
100000
100000
O&M for 2nd Year
1
120000
120000
O&M for 3nd Year
1
150000
150000
O&M for 4th Year
1
200000
200000
O&M for 5th Year
1
230000
230000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%