Public Health Engineering Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Public Health Engineering Department - PHED Tender
Civil And Construction
Electrical and Electronics
Electrical Works
Water Storage And Supply
Eprocure
Opening Date2 Nov 2024
Closing Date18 Nov 2024
Tender Amount₹ 10,47,18,000
Costs
EMD
₹ 20,94,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Testing And Commissioning Of 0 33 Mgd Rsfp Flash Mixer Clari Flocculator Filter House Clear Water Chamber Electromechanical Works And 0 90 Lac Gallons
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PHE_263052_1Bid Award Id
ViewTender No
Fresh E NIT No 20/JS/PHEDC of 2024-25Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://http://jkphedwaterbilling.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage.
550.05
554
304782.71
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer- in-Charge. (All kinds of soil)
4390.08
191
842675.86
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil :
508.7
91
46393.44
... More
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil
958.38
479
459351.53
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
2875
167
482425
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
3614.89
221
800155.9
... More
Providing and laying hand packed stone soling including all carriages complete
182.59
1500
273885
... More
Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job
9.5
9500
90250
... More
Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job
18.96
9000
170640
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
22.03
1204
26535.14
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
... More
1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 40mm nominal size)
89.7
6591
591235.13
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
115.69
5202
601923.5
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
304.3
7788
2370010.12
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
131.4
9395
1234594.98
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
72.23
9821
709432.23
... More
Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
36.78
10377
381671.58
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
-
-
-
... More
All works upto plinth level
342.62
8021
2748189.28
... More
All works above plinth level upto floor V level
300
9412
2823615
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.
5.35.1 Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340kg/cum)
539.02
98
53093.47
... More
Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
79.44
280
22318.67
... More
Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
592.92
941
557937.72
... More
Centering and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns etc. for mass concrete.
399.55
286
114411.14
... More
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
2919.18
628
1836018.26
... More
Suspended floors, roofs, landings, balconies and access platforms.
281.76
718
202360.03
... More
Lintel, beams, plinth beams, girders, bressumers and cantilevers.
540.18
577
311980.96
... More
Columns, pillars, piers, abutments, posts and struts.
256.08
742
190152.2
... More
Stairs (excluding landings) except spiral staircases.
86.4
851
73539.36
... More
Spiral staircases (including landings)
45.5
676
30769.38
... More
Arches, domes, vaults upto 6 m span
333.69
2281
761213.63
... More
Extra for arches, domes, vaults exceeding 6 m span
333.69
1118
373349.06
... More
Extra for shuttering in circular work (20% of respective centering and Shuttering items)
-
-
-
... More
Foundations
79.41
57
4547.81
... More
Walls
1939.64
125
243987.32
... More
Lintel Beams
202.59
115
23401.17
... More
Spiral stairs
45.5
170
7745.47
... More
Edges of slabs and breaks in floors and walls
225
262
58995
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).
27
293
7935.3
... More
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more.
184255
116
21419643.75
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 ( 1 cement : 6 coarse sand)
61.67
7877
485799.26
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
61.67
1455
89769.94
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood
0.85
108897
92562.75
... More
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm thick Second class Kail wood
19.2
3506
67332.48
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :35mm thick Second class Kail wood
16.2
3453
55947.51
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
2005.5
181
364198.8
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
17900
138
2473780
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters
-
-
-
... More
80x1.25 mm M.S. laths with 1.25 mm thick top cover
7.5
3305
24787.5
... More
Providing and fixing ball bearing for rolling shutters.
2
531
1063.1
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
82.5
599
49458.75
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete: In colour such as White, Ivory, Grey, Fume, Red Brown (as dirrected by the engineer incharge)
103
1114
114788.35
... More
Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with: Makrana White Second quality (16mm)
64.5
3328
214691.48
... More
Extra for pre finished nosing to treads of steps of marble stone
50
538
26937.5
... More
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter.
13
627
8155.55
... More
12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)
1218.53
364
443727.7
... More
12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)
630.1
290
183327.6
... More
6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
588.24
244
143971.74
... More
15mm thick cement plaster 1 : 6 ( 1 cement : 6 fine sand) on rough side of single or half brick wall
362.1
309
112178.58
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
1722.1
98
170057.38
... More
Applying priming coat:
-
-
-
... More
With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
35.4
63
2235.51
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (2mm thick)
362.1
178
64508.12
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
362.1
129
46729.01
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required. Made of G.I. wire of dia 4 mm
360
809
291564
... More
Structural steel work in single section, fixed with or without connecting
plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
4014
120
484891.2
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
-
-
-
... More
On steel work
100
193
19360
... More
On concrete work
150
194
29197.5
... More
Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
530
124
66144
... More
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc.complete
-
-
-
... More
125 mm
5
70
350
... More
100 mm
40
60
2400
... More
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
-
-
-
... More
150x10 mm
5
61
307
... More
100x10 mm
80
46
3720
... More
Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
220.35
706
155677.28
... More
Providing and fixing precoated galvanised steel sheet roofing
accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
35
508
17804.5
... More
Providing and fixing plained eaves boarding. 2nd class kail wood: 250x32 mm (nominal size )
60
702
42153
... More
Providing and fixing of 0.5mm Color GS Sheet Soffit boarding including angle frame, backing, supports etc.complete job
45
1400
63000
... More
Providing and fixing G.I. pipes (B medium) complete with
G.I. fittings excluding trenching and refilling etc. (external work)
-
-
-
... More
20 mm dia. nominal bore
12
254
3054.6
... More
25 mm dia. nominal bore
12
338
4059.6
... More
40 mm dia. nominal bore
12
488
5856
... More
50 mm dia. nominal bore
12
804
9653.4
... More
65 mm dia. nominal bore
12
1015
12190.2
... More
80 mm dia. nominal bore
12
1149
13788
... More
100 mm dia. nominal bore
12
1430
17169
... More
Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
-
-
-
... More
80 mm dia. Class 1
10
16000
160000
... More
100 mm dia. Class 1
11
20000
220000
... More
150 mm dia. Class 1
13
35000
455000
... More
200 mm dia. Class 1
4
45000
180000
... More
250 mm dia. Class 1
3
65000
195000
... More
300 mm dia. Class 1
1
80000
80000
... More
Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement): Up to 600 mm dia.
2
17088
34176.2
... More
Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages Complete Job.
-
-
-
... More
80 mm dia. pipe
66
1350
89100
... More
100 mm dia. pipe
94
1650
155100
... More
150 mm dia. pipe
78
2150
167700
... More
200 mm dia. pipe
12
2800
33600
... More
250 mm dia. pipe
8
3300
26400
... More
300 mm dia. pipe
2
4000
8000
... More
Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.): Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
110
511
56248.5
... More
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
65
569
37040.25
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)
-
-
-
... More
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.): With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
12
1190
14281.2
... More
Carriage by mechanical transport including loading, unloading, stacking of materials- Sand/aggregate 20mm for average lead of 25Kms
2456.4
465
1142569.9
... More
Carriage by mechanical transport including loading, unloading, stacking of materials- Cement/Steel for average lead of 25Kms
848.1
413
350587.58
... More
Carriage by mechanical transport including loading, unloading, stacking of materials- Aggregate 40mm for average lead of 25Kms
100.77
505
50953.34
... More
Carriage by mechanical transport including loading, unloading, stacking of materials- Bricks for average lead of 25Kms
28296
1
35087.04
... More
Electrical Items:Supplying and fixing of 25mm dia. medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
150
120
18000
... More
Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)
24
1400
33600
... More
Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combined S&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
10
2000
20000
... More
Providing and carrying out circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (excl. cost of conduit)
-
-
-
... More
2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
250
180
45000
... More
2 x 4 sq. mm + 1 x 4 sq. mm earth wire
200
320
64000
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
4
700
2800
... More
Supply and fixing of two module stepped type Electronic Fan regulator on the existing modular plate switch box including connections but excl cost modular plate etc., as required.
4
450
1800
... More
Supplying and fixing single pole 5 A to 32 A rating, 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the MCB DB complete with connections, testing and
commissioning etc. as required.
10
300
3000
... More
Supplying and fixing double pole 63 Amp 240V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in MCB DB complete with connections, testing and commissioning etc. as
required.
2
800
1600
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
6
150
900
... More
Supply of 24-Watt LED slim aluminum panel surface type complete in all respects.
8
700
5600
... More
Supply of 1200 mm sweep Ceiling Fans complete in all respects. Confirming to relevant Indian Standards
3
2500
7500
... More
Supply of 200 mm nominal sweep Exhaust Fans including shutter from outside complete.Confirming to relevant Indian Standards
3
1500
4500
... More
Providing, fitting and testing of LED flood light IP65 30W rating to pre-wired electric points on the outside of the Filter House building.
8
1800
14400
... More
Providing and laying of armoured cable 4 core Alminium XLPE, armoured for main service lines of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc., from main transformer to the stabliser to Sub main panel boards and from submain panels to different motors and DBS including Alminim thimbles, earth work excavation and filling for laying of cable complete and as per single line daigram
-
-
-
... More
4C x 70 sqmm XLPE/SWA/PVC/Alminium Cables +1C 35 Sq mm earth cable
30
1855
55650
... More
4C x 35 sqmm XLPE/SWA/PVC/Alminium Cables +1C 16 Sq mm earth cable
20
1163
23260
... More
4C x 25 sqmm XLPE/SWA/PVC/Alminium Cables +1C 16 Sq mm earth cable
20
1009
20180
... More
4C x 16 sqmm XLPE/SWA/PVC/Alminium Cables +1C 16 Sq mm earth cable
25
925
23125
... More
4C x 6 sqmm XLPE/SWA/PVC/Alminium Cables +1C 6 Sq mm earth cable
30
841
25230
... More
2C x 6 sqmm XLPE/SWA/PVC/Alminium Cables +1C 6 Sq mm earth cable
30
490
14700
... More
Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job. 30 KVA
1
85000
85000
... More
Mechanical Items:Providing & fixing of PVC under drainage laterals with specifications conforming to IS- 4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm: 75 mm dia
120
1600
192000
... More
Providing, fitting, testing and commissioning of following items for Flash Mixer/Alum dozing tank/Chlorine dozing:
-
-
-
... More
Mixing device with reduction gear system
3
4000
12000
... More
1.0 HP
6
5800
34800
... More
Foundation \ Base plate
3
6000
18000
... More
Starter along with necessary wiring upto motor
3
2000
6000
... More
P.V.C outlet, overflow system with fittings upto point of application
2
1000
2000
... More
150mm dia drain out let
2
1550
3100
... More
50 mm dia Service water piping.
2
700
1400
... More
Constant dozing unit with time device
2
2000
4000
... More
Manually operated hoist
2
12000
24000
... More
Providing fitting, testing and comissioning of air blower standard make ISI mark capable of providing compression @ 0.35 kgs/sqcm coupled with suitable 3 phase induction electric motor complete with auxiliary pipe system upto filter beds with pressure guage, Nozzles, foundation block, base plate, air check valve , non- return valve, Starter etc: 10.6 KLPM Air blower with 10.0 HP Motor.
1
175000
175000
... More
Supply installation and successful testing and commissioning of mono block pumping unit standard make ISI mark coupled with 2 phase induction motor with appropriate pumping capacity so as to fill the tank within the max. of 2 hours with nominal dynamic head of 15m along with all accessories like foot valves, non- return valves, foundation block, base plate, suction pipe, suitable rising main with nominal dia 50mm (class-B) with heavey duty valves and other accessories required for the job: Pumping unit with 5.0 HP Motor.
2
30000
60000
... More
P/F testing and commissioning of MS Rotating Desludging Bridge comprising of following items:
-
-
-
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for the Installation Testing and Commissioning of Half Bridge with Central Drive mechanism, scrapper and churners for required dia Clarifer: Welded
2500
138
345500
... More
Central axle turn table with double bearing and guide for incoming cable.
2
6000
12000
... More
Peripheral drive assembly with following motors, gear box, rollers, drive trolly (60:1 reduction gear box): Pumping unit with 5.0 HP Motor.
1
28000
28000
... More
Starter along with necessary wiring upto motor
1
2100
2100
... More
Flocculator drive assembly with crown wheel, pinion sets, reduction gear (40:1) with motors complete job. 1.0 HP
1
9000
9000
... More
Incoming cable, telescopic electric pole with rotary current collector
1
8000
8000
... More
Providing/laying and fitting including sucessful testing & jointing of GI/DI pipes (as per IS: 1239 of 2004 and latest ammendments thereof) complete with fittings excluding trenching and refilling etc external work. (The provisions for carriage of pipes involved shall be deemded to have been included in the itemized rates quoted against the advertised items from source to actual site of work nothing shall be paid on account of carriage separately): 150mm dia DI (K7) pipe
400
2009
803884
... More
100mm dia DI (K7) pipe
500
1429
714535
... More
80mm dia DI (K7) pipe
2000
935
1871940
... More
65mm dia GI Light Grade
1000
823
823370
... More
50mm dia GI Light Grade
2000
576
1153480
... More
40mm dia GI Light Grade
2000
478
956660
... More
25mm dia GI Light Grade
2000
344
689140
... More
20mm dia GI Light Grade
4000
249
997880
... More
Providing/ Fixing,installation,successful commissioning of double flanged MS pipe/specials viz. Bends, Tees, Tail pieces etc to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments.The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof & should be painted with anti corrosive red oxide primer. Complete Job.
5100
150
765000
... More
Electro-Mechanical Items
-
-
-
... More
OHT 1st
-
-
-
... More
Supply, providing, installation, successful testing and commissioning of vertical turbine pumping unit as per IS 1710 driven by VT motor for pumping water from sump of following parameters.
Site Condition
Altitude = 1600 Meters/Greater (AMSL)
Ambient Temperature = +40ºC to - 15ºC
Relative Humidity = 60%
Type of water = River Water.
River Bed Level = 10m below from Machine floor level
Water column in liner/sump = 2.5 m from sump/liner bed level
A. PUMP
Discharge = 20000 GPH
Type = Self water lubricated, VT pump, open line shaft.
Liquid to be handled = clear Water
RPM = 1450
Head = 46 m
Efficiency = Not less than 65 %
Impeller = Semi-enclosed mixed flow all bronze/stainless steel Line shaft/ head shaft = Stainless steel
Impeller shaft = Stainless steel
Suction Strainer = MS fabricated
Suction Bowl/ Bell mouth = Cast Iron
Pump Bowl = Cast iron
Column pipe = Mild Steel as per site requirement.
VT Pump to be designed with minimum number of stages. B. Prime Mover
Type = Vertical hollow shaft, AC squirrel cage induction motor Power Supply = 03 Phase, 415V + 15% AC
Frequency = 50Hz + 3%
RPM = 1450 Synchronous
Efficiency = Not less than 80%
HP = As per head and discharge requirement of pump
Class of insulation = F or as per IS requirements
Motor thrust bearing = Anti friction ball /roller bearing
Method of starting = star/delta
The motor should be able to with stand fluctuations in voltage and should be conforming to latest IS specifications.
C. Accessories
Each pumping unit shall be provided with suitable discharge head with proper stiffening box arrangement , non-reverse ratchet, coupling etc as per standard specification besides all other accessories required for satisfactory performance and mechanical works required for installation of pumping unit at site are included in the job .
Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory and pumping unit is to be approved from the concerned authority before procuring i.e Third Party.
2
850000
1700000
... More
Fabrication, providing and fitting of split type MS clamps 10 mm thick, 4 ft. long and 8 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts.
2
5000
10000
... More
Fabrication, providing, fitting of delivery manifold system for 02 no pumping units out of hot dip galvanized G.I, C-Class 200 mm Dia pipe as per site requirement with suitable no of bends / pipe Spacer of 200 mm nominal dia, reducers / increasers with - 22 mm thick flange, gaskets, blind flange, screw fasteners, tail piece with central web / T piece for fitting of washout valve and allied parts as per site requirement. The system is to be designed to with stand pressure of 16 Kgf / cm2. PRESSURE GAUGE (IS 3624)
The delivery of all the Pumps and Pump common header shall be provided with Dial type pressure gauges of suitable range complete with copper tubes and control cocks. The gauges shall be of direct mounting SS diaphragm sealed type. The dial size of each pressure gauge shall not be less than 100 / 150 mm. The M.O.C. shall be suitable for storm / raw water pumping installation. Each pressure gauge shall be complete with rubber of suitable class of enclosure. Accuracy shall be + / - 1% of full scale range or better. Scale range shall be selected so that normal system pressure is approximately 50 % of the full scale
specifications
Type - Top mounted (directly) diaphragm sealed type.
Reference standard- IS 3624
Range -As per annexed site requirement
Dial size - 100 / 150 mm.
Accuracy - + / - 1 %
M.O.C.:
Dial Cast -Aluminum
Flanges- SS 316
Internals-SS 304
Enclosure-Weather proof IP 65.
The work is to be executed at site by very skilled welder by shifting of desired tools and tackles as per directions of the site engineer, should be aesthetic and leak-proof.
1
90000
90000
... More
Check valves in delivery manifold
Providing and fitting of 200 mm Nominal Dia Check valve confirming to EN 1074-3 standard. Check valve shall be double flanged, slanted seat, tilting disc type. External damping unit shall be provided in the valve to reduce or eliminate the slamming effect. The Check Valve shall be double flanged free acting type, giving rapid non-slam closure & low head loss characteristics when door is in open position. The valves shall be used for water supply on line installations in upright positions. The valves shall be suitable for continuous use as their PN rating (PN1.0-1.6, in Mpa). The flanges and their dimensions of drilling shall be in accordance with IS 1538:1993. Face to face length of the valve shall be as per EN 558 – Series 14. The material & specification for different component parts of check valve given below: Body- Ductile Iron, IS:1865 Gr. 400-15 Disc - Ductile Iron, IS:1865 Gr. 400-15 Body seat ring - Stainless Steel, IS:6603 Gr. 04Cr19Ni9 / AISI-304 Retainer ring - Stainless Steel / Ductile Iron
Disc seal - EPDM Rubber
Shaft - Stainless Steel, IS:6603 Gr. 12Cr12 / AISI-410 Shaft bearing - Zinc free bronze Damping unit body - Ductile Iron, IS:1865 Gr. 400-15 Counters Weight - Manufacturer’s Std. Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating, d) Flow direction. Valve shall be coated (both internally & externally) with Electrostatic epoxy powder coating (Blue, RAL5005). The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work .
2
160000
320000
... More
Resilient Seated Gate Valve delivery manifold and wash out Providing and fitting of 200 mm Nominal Dia resilient / soft seated, bubble-tight, straight & pocket less body passage confirming to as per EN1171 / EN1074-1 & 2 / BS 5163 standard. Double flanged, non-rising spindle type (inside screw) design & Standard rotation shall be “clockwise” to close. Wedge shall be fully lined / encapsulated with EPDM rubber and WRAS approved (approved for drinking water). Valves should be of vacuum tight under low pressure condition and 100% leak proof when shut. Sluice Valves stem sealing shall not be not be of gland packing type, instead sealing by 3-O Ring system to ensure 100% leak tightness. Valve shall be suitable for PN 1.0 / PN1.6 (in Mpa) pressure rating. The flanges and their dimensions of drilling shall be in accordance with IS 1538:1993. Face to face length of the valve shall be as per DIN3202 F4 / IS 14846:2000 / BS 5163 / EN558:2008. The material & specification for different component parts of Gate valve given below: Body, Bonnet - Ductile Iron, Wedge - Ductile Iron encapsulated with EPDM Rubber Stem / Spindle - Stainless Steel
Wedge Nut - Brass, IS:6912 Leaded Brass Stem Seal, O-Ring - NBR Bonnet Bolts/Nuts - Carbon Steel (External Fasteners)
Hand Wheel - Ductile Iron / C.S. Fabricated
Bonnet Gasket EPDM Rubber Valves shall be operated by manually (by Hand wheel) Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating. The direction of rotation for OPEN, CLOSE position shall be marked on the hand wheel. Valve shall be coated (both internally & externally) with Electrostatic epoxy powder coating (Blue, RAL5005). The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work.
3
45000
135000
... More
Providing and fitting of 200 mm Nominal Dia Air Valve (Air Cushion Valve) to ensure system efficiency by air release and air intake during pumping in and draining out from the pipeline respectively. The valve should be specially designed to slowly exhaust the air that was admitted to the pipeline and to prevent the sudden rejoining of separated columns in a pipeline and the associated pressure surges or water hammer. Valves shall be complete with main body, top housing, outlet housing having opening for air escape, double inlet housing loaded with light spring, a cage holding a ball in lower side of outlet housing, an adjustable middle valve control orifice, gaskets and fasteners as per the requirement with integral body seat. A spring-loaded poppet with a brass seat and Neoprene sealing ring shall be provided to cover the top of the opening. The housing shall have a tapered outlet, the opening of which shall be adjustable by a tapered plug and Screw. The Air Valve shall be Flanged Type. The flange drilling dimensions shall be in accordance with IS 1538:1993. Air Valve shall be suitable for PN1.0 (in Mpa) pressure rating. The material & specification for different component parts of Air valve given below: Main Body, Outlet & Inlet Housing, Top Flange, Cage, Top Cover, Inlet Disc - Mild Steel Float - Wood (Rubber Coated) Top Housing, Poppet Valve Disc - Cast Iron
Seal Ring - Nitrile Rubber / Neoprene Rubber Seat, Bush - Brass/Bronze Gasket- Nitrile Rubber / EPDM Rubber Bolts & Nuts (External Fasteners) - Carbon Steel Poppet Spindle, Stem - S.S. Internal Fasteners - S.S. General Marking on the valve body shall be a) Brand/Logo, b) Size, c) PN Rating. Valve shall be (internally & externally) coated with Black Japan Paint, The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
3
150000
450000
... More
Providing, fitting of 200 mm Nominal Dia Zero Velocity Valve complete with shell, dome shaped internal cone, disc, spring, shaft, shaft sleeve, bush, end flanges and Fasteners as per the requirement with integral inspection window. The springs are to be designed in such a manner that the valve remains fully open when 25% to 125% of designed velocity is achieved. In case of closure of pump, disc starts closing in relation to decrease of velocity and fully closes when velocity drops near to zero. The valve is to be installed such a way that the entire length of water column is suitably divided in spite of differing gradients and undulations. The Zero velocity valves shall be mounted in any position i.e. horizontal, vertical or inclined pumping main. The Zero Velocity Valve shall be Flanged Type. The flange drilling dimensions shall be in accordance with IS 1538:1993. Valve shall be suitable for PN 1.0 (in Mpa) pressure rating & within the temperature range of 4⁰ C to 50⁰ C. The material & specification for different component parts of Zero Velocity valve given below: Inlet & Outlet Barrel/cone, Guide Dome/Internal Cone, Central Disc, Inlet & Outlet Struts, Inspection Door, Mounting Feet - Mild Steel (Fab.), IS:2062 Central Shaft - Stainless Steel, AISI-410 Seat Ring - Stainless Steel, AISI-304 Disc Seat/Seal - EPDM Rubber Spring - Spring Steel Bush Brass General Marking on the valve body shall be a) Brand/Logo, b) Size, c) PN Rating d) Flow Direction. Valve shall be (internally & externally) coated with Black Japan Paint
The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
2
145000
290000
... More
NRV/ Check valves rising main Providing and fitting of 200 mm Nominal Dia Check valve confirming to IS 5312. Check valve shall be double flanged, slanted seat. The Check Valve shall be double flanged. The valves must be compatible for buried applications and shall be safe to be used for water supply on line installations in both horizontal and vertical positions. The valves shall be suitable for continuous use. The material & specification for different component parts of check valve given below: Body- Ductile Iron Disc - Ductile Iron Body seat ring - Stainless Steel Disc seal - EPDM Rubber
Shaft - Stainless Steel Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating, d)Flow Direction.
It shall be electrostatic epoxy coated (approved for drinking water) both inside and outside of the valve. Cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work. The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with Rising main at appropriate spots as per site requirement. Included is cost of Fabrication, P/F of tail pieces of hot dip galvanized G.I, C-Class pipe 200 mm Dia with table flanges of 22 mm thickness if required as per site requirement in delivery system and rising main
8
78000
624000
... More
Rising Main
Providing, shifting, loading, unloading, stacking, of 200 mm Dia GI (6mm) open ended, finished neatly, well galvanized on both inner and outer surfaces, and shall be free from cracks, surface flaws, laminations and other defects as per IS 3589-2001 for laying of rising main from (RD 0 to RD 4000) from sump to storage reservoir with specifications as here as under (Gr. Fe 330.
Type – Plain Ended Diameter: Nominal Bore -200mm
Wall thickness: 6mm with tolerances
Tolerances for thickness, weight, length as per IS 3589-2001
Certificate – Manufactures with relevant IS code
Hydraulic tests for pressure.
Mechanical Tests.
Tensile tests. Are to be carried out by third party as per specifications of tender. The item includes shifting, installation, laying and fitting of the above flanged GI pipe, connecting end to end as per IS: 5822: Code of practice for laying of welded steel for pipes is to be adopted.
4000
3600
14400000
... More
Fabrication / providing / fitting of 200 mm Nominal dia of 22 mm thick MS flanges conforming to BIS 6392/1997 Table 17 to above GI pipes as per requirement includes Welding of flanges in two layers circumferentially in V-groove penetrating through the thickness of flanges. The welding shall be carried out with standard make IS marked electrodes, welding should be smooth & leak proof by shifting of DG set, welding machine, gas cutter with all other allied tools all along the laying contour of Pipe line at site for proper off set wedges etc
1650
2600
4290000
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
Quantity for raising main : 0.9250 x 3600 = 3429 cum Under road way a minimum clear cover of 1.5m is to be provided, same can be modified to suit local conditions
3429
256
880738.65
... More
Earth work in excavation in all kinds of soil by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
Quantity proposed : 0.9250 x 400 = 370 cum
370
479
177341
... More
Fabrication, Providing and fitting of long radius bend out of Class C G.I Pipe (6mm thickness) of length as per site requirement and flanged on both ends. The flanges are M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc. as per site requirement.
Nominal Dia - 200mm
12
9500
114000
... More
Providing / fitting of MS suitable sized nut bolt as per IS 1363 part 1
3300
150
495000
... More
Providing / fitting of metallic raised face flange insertion gaskets for each flanged joints to make leak as per IS 638/79.
850
200
170000
... More
Filling available excavated earth in trenches, plinth, sides of foundation etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead up to 50 m and lift up to 1.5m.
Quantity: 90% of above earth work excavation.
3500
218
763700
... More
Providing and laying of 450 mm dia S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS – 1536 to act sleeve for 200 mm Dia raising main while crossing roads ( As per site requirement)
30
11657
349710
... More
Painting of 200 mm dia GI pipes with two coats of anti-corrosive bitumastic paint of approved quality in the premises of pump house by the departmentally approved shade and colour
30
100
3000
... More
Fabrication, providing and fitting of 200 mm ND washout Tee with arm with arm length as per site requirement but not less than 1.5’x1.5’x1.5’. The Tee shall be fabricated out of 6mm thick G.I pipe (including tolerances) with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends.
2
10000
20000
... More
Fabrication / providing / fitting of 200 mm Nominal dia of 22 mm thick MS Blind flange for one of the wash out T to be located at central portion of raising main as per requirement includes Welding of flange in two layers circumferentially in V-groove penetrating through the thickness of flanges. The welding shall be carried out with standard make IS marked electrodes, welding should be smooth & leak proof by shifting of DG set, welding machine, gas cutter with all other allied tools all along the laying contour of Pipe line at site for proper off set wedges etc.
1
4000
4000
... More
Providing / fitting / installation / testing / commissioning of 200mm dia at Electromagnetic Insertion type Flow Meter with specifications
(a) Type - Electromagnetic type, insertion
(b) Pipe size - 200 mm © Ambient temperature of fluid - 0 to 100 deg C. (d) Accuracy - +/- 1% of flow rate
(e) Output - Square wave pulse, upto isolated (f) Electrode - Carbon graphite
(g) Power supply - 230 V AC / 110 V AC, 50 Hz 24V DC
(h) Velocity - 0.06 to 6.09 m/s
(i) Transmitter - Coated Aluminum
(j) Pressure - Up-to 13.8 kg / sq. cm
(k) Make – Krone Marshall , ABB , Rands (l) Display - 8 Digit LCD non- resettable type for totalized quantity (m) Retransmission output to SCADA- 4-20mA
(n) Damping - Adjustable from 5 to 30sec.
(o) Cable Entries - 4 No. for Remote Amplifier
(p) Humidity - 90% R. H. max. non condensing.
(q) Material of Housing - Al. Die cast
® Measurement results shall be independent of density, viscosity, pressure, temperature, solid-impurities and conductivity Variations (above 20 µS/cm).
(s) There shall be no additional pressure drop across the meter.
(t) Compatible with virtually all corrosive / non-corrosive Liquids.
(u) IP-65 class of protection shall be provided.
(v) Flow Measurement - shall be independent of velocity profile across the diameter of the pipe-line.
(w)Connection - Flanged End type (x) Discharge at site (10000 to 40000 GPH )
Further job includes all the cabling required at site & provisions for GSM service & allied woks needed at the site at time of installation
1
250000
250000
... More
Providing, fitting, testing and commissioning of 75 KVA voltage stabilizer as per specifications below:
Capacity: 75 KVA
Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi- step.
Type of Regulator: Double plate type with electrolytic copper contacts.
Input voltage: 180-400 volts. (3 phase)
Output voltage: 400 ±10% volts.
Frequency: 50 ±3 C/S. Windings: Electrolytic grade copper of adequate section, vacuums impregnated and Oven-dried.
Insulation: Fibre glass insulations to tested parameters.
Cooling: Naturally, Oil cooled
Temp. Rise (Max) : 30°C above ambient
Mounting: On Uni-directional wheels.
Correction rate: 30 volts per step Wave form distortion: virtually nil Duty cycle: 100% continuous.
Enclosure: MS sheet enclosure in pressed CGR Sheet powder coated with radiators.
Core laminates: High grade, low eddy loss, grain oriented silicon steel laminations.
Load: Three phase induction motor load. Load Amperes (continuous) Overload in 24-hours operation: 10% above continuous Ampere rating. The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped, test certificate and shall have name plate with specifications.
Standard Fittings & Accessories 1. Terminal for incoming & outgoing with suitable insulating arrangements.
2. Input output & earth terminal shall be marked clearly.
3. Earthing terminals - 02 Nos
4. Lifting Lugs for core and complete stabilizers.
5. Oil drain valve with plugs of cover plate.
6. Oil filling hole with cover.
7.Front wheels should be unidirectional
8. Operating Wheel for manual operation
2
140000
280000
... More
Supply, Fabrication, installation and fitting of Modular motor control panel to be fitted with accessories strictly in line with the relevant IS codes and standards with all latest amendments till date if any The broad band technical details shall be as under Broad Band technical details :
Enclosure Details =
Type = Cubical
a. Free Standing, Floor mounted, Compartmentalized Design
b. Protection class = IP-55
c. Openings and vents = As required
d. Painting = As per IS standards qualifying IP 55 requirements. e. Doors = shall be suitably hinged to ensure uniform pressure right along the rubber beading. Doors shall be lockable with special type operated locks. Hinges shall be zinc die – castings or stainless steel.
f. Application = Indoor
g. Cable Entry = Bottom /side
h. Space for equipments = Bus bar, Main MCCB, MPCB, FASD starters, Multi Function meters (motor protection units), Indicating amps, Digital Voltmeters, and Ammeters, Earth Fault meters
A. Bus bar Chamber: The bus bar chamber shall be fitted at the top of the panel vertically / horizontally throughout the length as per requirement. 1. No of bus bars = 4 Nos. ( 3 phase and 1 No neutral) 2. Material of bus bar= COPPER 3. Rating = 200 Ampere. 4. The bus bar shall be qualifying IP 55 Requirements. B. Main Circuit Breaker (Incomer MCCB):
• 1.Type = MCCB • 2.Qty = 1 Nos
• 3.No. of poles = 4
• 4.Rated current = 100 Amp
• 5.Operation = Extended Rotary Handle • 6.Rated operational voltage = 415 V ± 15%
• 7.Rated frequency = 50 ± 3% Hz • 8.Ultimate S.C Breaking cap at (415 volts A C, 50 Hz) = 50 KA 9.Type of release = Microprocessor Motor Protection Release with adjustable Overload & short Circuit
1
480000
480000
... More
C. Change over Switch: 1.Qty. = 01 No. 2.Rating = 100 Amp (400 +15%V, 50 + 3%Hz) 3.Type = Front operated, on load, 4 pole,
D. Circuit Breakers outgoing for FASD starters 1.Type = MPCB (63 Amp) 2. Qty = 03 Nos 3.Duty Range = (45-65) 4.Rated operational voltage = 415 V ± 15% 5. Rated frequency = 50 ± 3% Hz 6.Ultimate S.C Breaking capacity at (415 volts A C, 50 Hz) = 50 KA E. Auxiliary MCCB for Heating / Lighting:
1. Circuit Breaker = MCCB (Outgoing)
2. Qty. = 1 No.
3. No. of poles = 4P
4. Current Rating = 32 Amp. 5.Rated operational voltage = 415 V + 15 % 6.Ultimate S.C Breaking Capacity at (415V AC, 50 Hz) = 36KA
F. Variable Frequency Drive (VFD) for DG set operation
Rating -30 KW (HD) / 37.0 KW (ND)
Phase- 3-phase
Voltage-415 V± 15%
Built in PLC Functionality
Built in Brake control
Multi Keypad
Built in RS485 Modibus RTU Communication.
Make- L&T/ABB/Schneider
CAT No- LTVF-S40075BAA (L&T). The ABB , Schneider driver shall have equipped/ comparable/ features that are associated with above listed model of L&T
Quantity – 01 No
a. G.FASD Starter b. Qty: 02 each
Main Contractor: 65 AC3P AC3 Rating Delta Contactor: 65 AC3P AC3 Rating
Star Contactor: 40 AC3P Rating Contactors shall conform to IEC standards or equivalent for motor starting contactors. Capacities of the contactors shall be carefully selected leaving sufficient extra capacity, according to the AC – 3 rating
Thermal Overload Relay (36-66) – 01, Star Delta Timer (0-60 Sec) – 01
-
-
-
... More
Three ammeters to rated phase currents and ammeters shall be marked according to the phase designations. Indicator lamps to indicate following:
Pump running
Pump tripped (overload) Pump stopped
Pump tripped (low water level)
Hours run meter
Dry run protection
Single phase preventor.
Outgoing terminals
2 pole – MCB for control supply
ON/OFF push buttons to be provided on the front door
Emergency stop push button to be provided.
H. Motor Protection Units ( MPU)
1. Operation – Auto manual
2. Display - LED/LCD
3. Overload protection set point user selectable
4. Under load protection set point user selectable
5. Single Phasing Protection
6. Reverse Phasing Protection
7. Unbalance Protection
8. Over Voltage Protection set point user selectable.
9. Under Voltage Protection set point user selectable.
10. Quantity -02 No
c. I.20 KVAR Capacitor Bank
• Capacitor 20 KVAR Phi Cap Heavy Duty – 01
• Contactor Capacitor Duty 25 KVAR – 01
• MCB TP 63A C Curve - 01
• On Delay Timer 0-60Sec – 01
Capacitor Bank to be connected in such a way that it will get on after 10-15 Sec of Start Delay.
J. Instrument Transformers: Auxiliary wiring of the starters to be done through
415/220V PT 500VA Burden
PT 415V/220V 500 VA Burden
• Qty: 01
K. Auxiliary Protection
1. Water level control relay with all wirings and capsules
2 Earth Fault Relay - Earth fault, ground fault monitoring ( MCB - MCB SP, 10A (10 Ki))
-
-
-
... More
Supply, installation, testing and commissioning of 100KVA, 6.6 KV/ 415V outdoor type, 3 phase, 50 c/s, oil immersed, naturally cooled, double copper wound, core type transformer complete in all respect & shall be properly gasketed to make it suitable for outdoor use and to withstand driving rains & & should comply IS: 1180 (pt-I)/2014, amended up to date
Technical Particulars Rated capacity- 100KVA Voltage ratio at no load condition- 6.6 KV/ 415V Nominal System Voltage HV (KV)- 6.6 KV Nominal System Voltage LV (V)- 415 V Conformity of the specification as per IS 1180 (Part-I): 2014 with latest amendments till date. Rated frequency- 50 Hz +3%, -5% No of phase :- Three Connection:- HV—Delta, LV- Star, Star point of Secondary side shall be brought out by separate insulated bushing outside. Cooling- ONAN Winding material - Double copper wound Service – Outdoor type Transformer cover tank construction- Non sealed type, Bolted Type of mounting – Ground mounting Energy Efficiency Level - 2 Core Material – CRGO (as per IS:3024 latest) Neutral Earthing- Solidly earthed Tank Configuration – With Radiator Fins Material of Transformer Tank– Mild Steel Terminal Arrangement - Through insulating bushing outside the body of transformer. All studs passing through said bushing shall be of suitable size & made of copper including that of neutral. All studs shall also be provided with proper size of nuts. Rating, Marking and Diagram Plate shall be as per IS: 1180 (latest). Fittings and accessories Fitting shall be as per IS: 1180 (latest) The transformer should be complete with first filling of transformer oil as per IS: 335, amended up to date with maximum oil level in conservator. Documents to be submitted along with the offer Submission of documents along with supply Prior to dispatch of the equipment the QAP comprising of documents is to be got approved a) ISO Certification b)Copy of manufacturer’s Test certificates of Transformer as per relevant IS: 1180 c) Technical Literature and operation & Maintenance manual. d) GA Drawing and Circuit Diagram. NOTE: The scope of the work shall include obtaining of necessary inspection/clearance certificate from the concerned department for all the required equipment. The testing and commissioning shall be completed only after obtaining above certificate.
1
330000
330000
... More
Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps ( for transformer bed, taping point , brackets of poles etc)
200
150
30000
... More
Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, single break provided with locking arrangement at both ON and OFF position consisting of HT post double insulator, copper or copper alloy high pressure heavy contact assembly, rod with bearings , operating handle and 2 length of 32mm dia. GI pipe conforming to IS 1818 1961, 06 No. of insulators, rated
voltage 6.6 KV 200A complete as per IS specs(01 no. at existing tapping point and another at existing substation).
1
12000
12000
... More
Supply, Installation, Testing and commissioning of 6.6 KV polymer fuses Set Horn Gap 3-phase 200 A suitable for vertical installation.
1
5000
5000
... More
Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class, 10KA, 9KV, LA With polymer housing, Station Type
1
8000
8000
... More
Supply and fitting of 6.6 KV polymeric composite pin insulator 12 KV, 5KN, Lighting impulse 75KV Positive, and 80 KV Negative , creepage distance 320 mm
6
350
2100
... More
Supply, installation, erection of 9 Mtrs long H.T pole of specifications ST-410 (SP-33). The job further includes drilling of holes for installation of various accessories .wherever required the job further includes G.I wire earthing of pole, concreting and allied operations as per REC standard
4
27000
108000
... More
P/F of Galvanized nuts, bolts of various sizes as per site requirement for fitment of electric substation, poles etc.
10
150
1500
... More
P/F Danger Plate with clamps
4
175
700
... More
Providing and fixing G.I Barbed wire for anti-climbing devices
4
160
640
... More
Providing and fitting of Galvanized stay set with 50 X 8 mm Stay Clamp , Guy insulator (2no.), Anchor plate (200X200X6mm) , nuts and bolts , 2 N0- turn buckle , 1.8 m long , 16 mm diameter solid G.I stay rod & 7/3.15 mm dia. G.I stranded wire complete.
4
5000
20000
... More
Painting of poles by Red oxide
2
400
800
... More
Painting of poles Aluminum paint
2
600
1200
... More
P/L of ACSR conductor as per IS 398 (0.05)
60
60
3600
... More
Providing and fitting of PG clamps.
4
450
1800
... More
P/F of 11 KV cable termination kit for connecting 35 Sq mm XLPE cable (ABC type) with the existing HT line near tapping point and HT transformer
2
9000
18000
... More
Supply, installation, testing of 35 Sqr mm XLPE HT cable (ABC type) for 11 KV grade with cross sectional area 3x35 .
30
900
27000
... More
Providing and fitting of Anchoring clamps comprising clamp body , plastic wedge, steel bill bracket , straps and buckles or nuts and bolts required for holding of 3 – Core , 35 Sq. mm H.T AB Cable.
6
460
2760
... More
Providing and fitting of LT Distribution box for H.T transformer with 100 Amp MCCB For incomer and SFU for outgoing circuits.
1
30000
30000
... More
Providing and fitting of three phase, 4 wire commercial Porgy Meter with all allied Accessories.
1
28000
28000
... More
P/L of earthing station for electric substation, LT panel and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. The job includes Auguring of bore of required Dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards.
Safe earthing electrode size : 80 mm Dia Length : 2000 mm
Back fill compound : 30 kg
6
11000
66000
... More
Providing Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete welded members for 2 MT capacity gantry systems, Motor base frame, DG set shed, transformer bed, cable trays , pipe blocks, Employee bed and transformer bed with gantry, trash racks, trusses and all allied steel structures required at site The quantity of the steel members like ISMB , MS chequered sheet ,ISMC , ISA , railing pipe ,MS pipes, angles, Flats , prefabricated grills may vary as per site requirement as it is conditional to civil structures being constructed.
4000
127
510000
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes
1800
142
257220
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surface)excluding the cost of Purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2
95
974
92534.75
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2
10
761
7619.5
... More
Providing / fitting of geared / hand railing type - Plain Travelling Trolley of modular construction, fabricated out of rolled steel plates, pivot mounted, runners mounted on roller bearings for easy movement of wheels, with wide range for beam width selection up to ISMB 500. The said equipment is to be used for horizontal movement of the 05 ton chain pulley block / Chain hoist
2
14000
28000
... More
Providing, installation and testing of manual type triple spur gear chain pulley block pull lift type along with monorail geared travelling trolley having following features Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears. Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation. Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
i. Make = Reputed make Capacity = 2 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
1
30000
30000
... More
Supply, Installation and testing of motorized chain hoist with hook suspension along travelling trolley of proper specifications having following features The chain hoist shall also have the following characteristics:- Motor: The basic drive of the hoist is provided with 3 phase squired cage totally enclosed induction motor having a high starting torque with class “F” insulation. The make of the motor be NGEF / SEIMNS / GEC/ Crompton and conform to IS : 325 (RPM-1500) Brake: The hoist shall have instant action, Fail to safe electromagnetic disc brake mounted on the end of the motor to ensure minimum safety and reliability when the load is held in its position as soon as the supply to the motor is switched off internally or accidentally. The adjustment & maintenance of break shall be quick and simple. Gears: The hoist shall have precision cut super and helical gears made of alloy steel mounted on bearings and housed in a dust proof gear box. The lubrication of gears be of high viscosity and temperature for longer life of gears. Load Chain: The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation. Load chain wheel: Specially designed, perfectly machined wheel providing correct grip of load chain made of malleable cast iron makes the hoist most safe and reliable against any failure. Lifting Hook: The lifting hook shall be forged with provision for free swivelling. Limit Switch: The limit switch shall have snap action, shunt type prevent over hoisting or over lowering to ensure maximum safety of operation. Control: The unit shall be controlled by heavy duty air break direction reversing type contractors and electrically inter – locked for safety. Contactors relay, fuses, low voltage transformer be fitted for control voltage and are to be housed in fabricated / pressed sheet steel box dust proof.
Push button pendent: The contactors shall be operated by a pendent push button station suspended from hoist by a rope / dog chain to prevent any damage to the pendent cable and for easy operation. Test: The hoist supplied is to be tested at 25% overload and the test certificate of the same be provided at the time of installation. The complete unit as specified above is required to be fitted / tested at site. Besides the above works the job Includes Providing and fitting 3-Core 6 sq. mm ,50 m submersible cable for providing power supply to motor of chain Hoist including P/F protection device of suitable capacity. The main specifications of the chain Hoist are given below:
Make = reputed make Capacity = 5 ton Hoisting speed = 2.4 M/Min Hoist motor H.P = as per requirement
No. Of chain falls = 4 Min. Height of lift = 6 M
1
200000
200000
... More
Providing and fixing 15cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gram/m2
30
958
28758
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 grms
4
150
600
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
Single Socketed pipes - 75 mm diameter.
25
250
6250
... More
Fabrication / providing / fitting of colour coated 8 inch 24 gauge GI prefabricated side morkhas for gabble area sides
40
300
12000
... More
Fabrication / providing / fitting of 26 gauge Color coated GI sheet chaja
30
1000
30000
... More
Cost on account of providing and fitting of 10 mm thick Bakelite sheet strips under AVR and transformer.
10
2000
20000
... More
Fabrication, installation of perforated ladder type pre-painted MS cable trays with perforations not more than 17.5% in convenient sections joined with connector, with ventilated flanged cover, suspended on MS suspenders included are accessories like vertical bends, horizontal bends, inside bends, outside bends, tees, cable clamps, cable cleats, bolts & nuts, painting of the suspenders etc. as required. As per IS 1255
Tray Thickness - 3mm, Cover Thickness – 3mm,
Dimensions- 100mm width x 100mm depth
20
1000
20000
... More
Providing, installation, testing of power cable for working voltage up to and including 1100 volts; 95 mm Sqr Armoured Aluminum 3.5 core cable as power wiring from transformer and GD set to main panel change over switch. Cost includes laying of cable in trenches in 80mm dia slippery conduit where ever it is to be laid underground & in 65mm dia ASTM pipes over the wall of pumping house with wooden planks, GI hooks as per site requirement if not laid in cable trays, included is termination of ends with suitable Aluminum tube terminals dully crimpled & taped. IS Code - IS 7098(part-1)/ IS 1554(part-1).
60
900
54000
... More
Providing and laying of 16 mm² 3 core especially formulated PVC compounded insulated sheathed with abrasion resistant PVC compounded impervious to water, grease, oil etc. stranded copper submersible cable from starter to motor dully laid in 2 inch Dia pvc pipes as per IS- 694:1990.
100
800
80000
... More
Illumination of pump house involves providing & fitting of lighting points involves:
a) Wiring to lighting points with main wire as 1.5 mm sq. and for branches 1 mm sq. PVC single core multistranded copper conductor insulted, unsheathed 1.1 KV grade ISI marked with length as required.
b) Recessed pvc conduit/ channel 1.5” and 1” as required.
c) 6 Ampere flush type switches ISI marked.
d) Switch board frame fabricated out of wooden/ iron included flushing ways for above frames on walls as per site requirement.
e) Phenolic / phylum laminated sheet cover for fitting of switches over the above frame.
f) Ceiling roses, square blocks, angle holders, PVC corner/ending points accessories, washers, star screws, cement nails, rawl plugs as per site requirement.
15
1000
15000
... More
Providing and fitting of 10 watt LED lamps for holders of item no 1.
15
350
5250
... More
Providing and fitting indicator points ISI marked.
4
500
2000
... More
Providing and fitting Fan regulating points with 02 No 400 mm sweep wall fan ISI marked
2
2500
5000
... More
Providing and fitting of fan and 04 no 150 mm exhaust fans with controlling switches. ISI marked
4
1500
6000
... More
Providing and fitting 03 pin flash type socket 6 Ampere ISI marked
4
500
2000
... More
Providing and fitting of heating/stabilizer input and output points involves:
a) Wiring for 5 pin 16 Ampere power plug point with 2.5 mm sq. pvc single core multistranded copper conductor insulted, unsheathed 1.1 KV grade ISI marked with length as required length as required.
b) Recessed pvc conduit/ channel 1.5” and 1” length as required.
c) 16 Ampere 5 pin flush type switches ISI marked. And 16 Ampere flash type Socketed modules ISI marked.
d) Switch board frame fabricated out of wooden/ iron included flushing ways for above frames on walls as per site requirement.
e) Phenolic / phylum laminated sheet cover for fitting of switches over the above frame.
f) PVC corner/ending points accessories, washers, star screws, cement nails , rawl plugs as per site requirement
6
2000
12000
... More
Providing, fitting of Distribution Board 6-way S P N single door powder coated sheet steel enclosure for surface mounting fitted with bus bar, DIN channel, neutral link and incoming contact. The above DB is to be provided /fitted with double pole 63 Amp MCB for heating circuit & rests five of 16 amps each for lighting, fans/exhaust fans, premises luminary, and auxiliary circuit. Further job includes providing / fitting 4 mm² multi stranded single core 1100 volts, pvc insulated copper conductor through pvc conduit as service line from main panel as per site requirements.
1
7000
7000
... More
Providing/ fitting/ testing/ commissioning of power operated room heaters with fallowing specifications
3 power settings 1500 /2000/2500 watts
Oil filled radiator with 12 fins Fan / Warm / Hot wind for selection
Easy serviceability
No Oxygen Burning.
Tilt over switch for extra safety
Rear safety front cover Frequency (hertz): AC 50 Hz
Adjustable thermostatic heat control. Touch sensor.
Quick heating with PTC fan
Material-Metal and Plastic
Heating Method- Convection
Over Heat Protection = Available.
Mobility – Castor wheels with mounting plate for easy mobility, back cover and humidifier
The unit is to be provided with warranty card for on door service during warranty period of defect liability.
Further Job includes providing / fitting of separate circuit involving 2.0 mm square multistranded copper conductor from main Heating plugs by 16 amp switch , socket modules , 03 pin top , wooden blocks and all allied items as per site requirement.
1
25000
25000
... More
Providing fitting of Solar Rechargeable Portable Lantern for Emergency and Portable Lighting purpose with specifications here as under
Ultra-portable, super-bright LED light, TOUGH & STURDY: Highly durable, long life to be operated under all weather conditions
Wattage: 4 to 8 watts
Back up Duration: Upto 4 hours Charging method provision: Charging via Solar Panel/Also can be charged with Mobile charge adapter Re Portable hand held lamp with step dimming and embedded / isolated solar recharge panel
2
4000
8000
... More
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter (Make: Microteck/Luminous) including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. (Make: Amaron /Exide) with 2-core 6 Sq mm Cu wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc of reputed make for proper fitment and installation of the item.
1
35000
35000
... More
Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro- mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. Shall have the following specifications: Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 2.5mm Size: - 1M wide.
5
1400
7000
... More
Providing of set of 06 no 9.5-liter capacity GI buckets painted in post office red colour with prior coat of red oxide primer & written with white paint “FIRE” & mounted on angle iron frame with brackets of appropriate size & capacity including cost of providing / filling of sand etc. Included is providing First Aid box as approved by Indian red cross conforming to IS 2217 & amended till date
1
8000
8000
... More
Supply, installation of 6 kg CO2 type fire extinguisher manufactured as per IS: 15683 of 2006 with IS mark and comply with DGMS (Approval). The CO2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipment’s. The cylinder used for fire extinguisher shall be approved by protroleum and explosive safety organization (PESO) as per gas cylinder rules 2004 and as per IS: 7285 of 2004. The body should be made of seamless steel (manganese) confirming to IS: 7285 with IS mark and should be provided with squeeze grip nozzle and should be filled with CO2 confirming to IS: 15222 of 2002 with certificate. The extinguisher shall be provided with manufactures test certificate and hydraulic test certificate by BIS from PESO.
4
6700
26800
... More
Illumination of Premises:
Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
1) 4 Way Terminal Connector 20 Amp.
2) 4 No MCB 8 Amp. The job includes fabrication, providing and fitting of four arm GI structure at the top having 120˚ angle between arms and each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2 mm copper wire from each terminal connector to each holding arm.
The pole is to be mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” (cost of concreting not included in the job) using 04 No anchor bolts of required size not less than 7” in length. The complete job includes earthing in GI Electrode as per relevant IS Code.
1
32000
32000
... More
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole vide item No.36
Having following specs:
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminium housing with power coated finish and having Ingress Protection up to IP-68.
The LED is to be properly fitted on the arm of the pole and connected to the copper wire as directed."
4
9000
36000
... More
Providing Laying and connection of 2Cx10 mm² XLPE Aluminum Armoured Cable from the connector of high mast pole to the stabilizer. The job includes underground laying or overhanging as per requirement and directions of the site in-charge.
90
130
11700
... More
Providing Laying and connection of 2Cx06 mm² XLPE Aluminum armoured Cable from bottom to the LED lights. The job includes underground laying or overhanging as per requirement and directions of the site in-charge.
1
3000
3000
... More
Providing, Installation and testing of 2KVA fully automatic voltage stabilizer with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit as per location provided by site in charge.
1
11000
11000
... More
TOOL KIT For Maintenance:-
The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of :
i. Double ended Spanner (Chrome plated) of size in mm
6/7,8/9,10/11,12/13,14/15,16/17,18/19,20/22,21/23,24/26,25/28, 24/27, 30/32 each – 02 no. ii. double ended Ring spanners chrome plated of size in mm 6/7,8/9,10/11,12/13,14/15,16/17,18/19,20/22,21/23,24/26,25/28, 24/27, 30/32 each – 02 no. iii. Allen key set black finish of size in mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 each – 2 NO.
iv. Combination Pliers insulated with thick C.A sleeve; size in mm 165, 210, 255 each – 02 No.
v. Long nose plier insulated with thick C.A sleeve; size in mm 165, 205 each – 02 No.
vi. Side cutting plier insulated with thick C.A sleeve; size in mm 165, 205 make – 02 No.
vii. Insulated screw Driver with Blade length in mm 50,75,100,125,150,200,250, Blade dia. in mm 1.6 x 0.4 , 1.6 x 0.4, 3.0 x 0.4, 3.5 x 0.5, 3.5 x 0.5 , 4 .0 x 0.6 , 6.0 x 0.8 two numbers each. viii. Hammer with handle weight – 110 gm., 340 gm., and 600 gm. –each 1No. ix. Heavy duty pipe Wrench length in mm - 200, 300, 600 each – 01 No
x. Electric MultiMate=1No
xi. Digital multimeter – 1No
xii. Digital Clamp tester capable to measure up to 400A - 1 No.
xiii. Hack saw frame with hack saw blade – 01 no.
Xiv. S-16 MXL, S- 16 H X L Socket Set (19 sockets + 6 Accessories) – 01 No
1
40000
40000
... More
Providing of good quality bedding for night stay/Shift consisting of: -
i) Mattress with warm cover size 6'x3' (6Kg)- 02 No’s
ii) Quilt with warm cover size 5'x8' (6Kg)- 02 No’s
iii) Pillows with covers - 02 No’s
iv) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
b) The job also includes providing of pressure cooker 5ltr 02 No’s, Steel patila (utensil) 5ltrs 02 No’s, cooking heater infra red type 01 No., room heater 01 No., steel buckets 10 litre capacity 01 No., Plastic bucket 10 litre capacity with Mug 02 No’s each, steel glasses 06 No’s, steel Plates with large spoons and bowls 03 No’s each, Cup and Saucer set (01 No. Set) and, 5kg Gas cylinder with burner/ stove. All the utensils shall be of Prestige, Pigeon, Wonder chef, United, Futura make.
The job also includes providing of thermo-cool 15’x12’ along with excel matting of 15’x12’ size. The job also includes providing of unbreakable Plastic Chair table set consisting of chairs 04 No’s, extra heavy Table 01 No. of Samruddhi/ Neel kamal/Supreme /Anmol Make. The job also includes providing of good quality safety Door locks (03 No)
1
40000
40000
... More
Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each)
1
8000
8000
... More
Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipment’s installed at site. Size: 4’×6’ out MS Angle of 40X 40 X 5 of 36rft and MS sheet of 1 mm thick total weight of 50.16 Kgs
2.23
2800
6244
... More
Providing, installation, testing and commissioning of net based CCTV surveillance camera for premises, pump room, switch gear room, store room with following specifications.
08 Channel NVR : 01 No.
Cameras (1.3MP, 3.5mm lens with night vision): 06 Nos.
Inner (IP Dome type): 02 Nos.
Outer (IP Bullet type): 04 Nos.
CAT 6 cable as per site requirement
Power Switch : POE, 08 port (As per requirement)
Connector : RJ-45
DC pins : As per requirement
Hard Drive : 02 TB
LED Monitor : 24” HDMI cable: 01 No.
Dongle with activated sim with 01 year recharge
1
60000
60000
... More
Designing, manufacturing, Providing /fitting of scrolling & moving LED type digital scheme parameter / status board, power operated with scrolling parameters as “Water Supply Scheme & current status of the scheme with general parameters here as under
Multiline
Multicolour
Day light visibility
Editing facility at user’s discretion
Required weather proof construction to suit outdoor condition
Key board / computer interface
On site programming
Power coated Cabinet of mild steel body suitable for angle iron mounting.
Operating climatic condition - -10 to 50 Ċ.
Power – single phase 230 volts. Size – (2 feet x 6 feet)
Mounting- wall
1
40000
40000
... More
Providing and fitting of 19 mm thick multi-layered ply sheet of size 6 x 3 feet , 2 no’s including cutting , fixing all complete including painting of the play sheet by one coat of primer and two coats of enamel paint
1
4500
4500
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work up to plinth level with 1: 2 : 4 mix ( 1 cement , 2 coarse sand , 4 graded stone aggregate 20 mm nominal size)
20
6650
133000
... More
Providing and laying of soling stone
20
800
16000
... More
Centering and shattering including strutting, propping etc. and removal of from work for foundation, footings, base for columns
30
286
8590.5
... More
Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase 57 KVA water cooled Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator / new amendments as per CPCB 1V norms in DG Sets from 2023 suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments. The DG Set is required to be fitted and tested on load at site The D.G Set shall have the following technical specification. Besides the above works the D.G set shall be provided with 12 V desired capacity Lead acid battery of reputed make fitted inside the D.G set Canopy along with necessary accessories. The job also includes the cost on account of HSD and skilled operator required for operation of D.G set for a period of 05 hours continuously during its testing and commissioning of D.G set at site. The capacity of the D.G set is given below ALTERNATOR The alternator shall be self-excited. Self-regulated for desired rating. The alternator shall be fitted with high performance AVR and suitable for continuous and trouble free operation.
SPECIFICATIONS
1) Rated Output at above Site Conditions: - 57 KVA 2) Rated Speed: - 1500 rpm 3) Efficiency:-88.8% 4) Voltage: - 415 V at 50 Hz DIESEL ENGINE (Prime Mover) The engine shall be diesel driven to develop requisite BHP at 1500 rpm for the alternator rated as above at an altitude of 1600m AMSL with ambient temperature ranging from -15 ˚C to + 40 ˚C under 60% humid conditions. Specifications: - 1) Speed: - 1500rpm 2) No. of cylinders: - As per new amendments
3) Aspiration: - TC 4) Cooling system:-water cooling 5) Method of start: - 12 volt electric start / as per new amendments
The engine shall be fitted with following accessories. 5) Method of start: - 12 volt electric start / as per new amendments
The engine shall be fitted with following accessories.
1) Fuel tank:-suitable capability for twelve hours continuous running on full load. The fuel tank shall be floor mounted type made of M.S sheet duly painted and fitted with inlet/outlet return connections, air vent, drain valve, level indicator and fuel pipes
2) Battery:- 12 volt battery charging system along with leads and terminals C/W charging dynamo and cut out fitted with suitable rating starting system.
3) Safety control: - In order to shut down the engine in the event of high water temperature emergency control switch shall be provided. It shall also be fitted with ant vibration pads, cold starting aid, safety control for low lube pressure etc.
4). ) Radiator:- Suitable Size C/W hoses, clamps etc.
C) Control panel: - It shall be fabricated out of steel sheet of desired thickness, pre-treated and Aesthetically finished. It shall be totally enclosed, dust, vermin proof with IP-53 degree of protection. The panel shall be of AMF type with meters MCCB/MCB, Push buttons, Pilot Lamps, starting switch with keys, Lube oil gauge, Temperature and pressure gauge, Speedo meter and hour meter etc. All the above components shall be properly mounted duly wired and shall be of reputed make.
D) Miscellaneous:-Technical literature and catalogue is to be provided. E) Earthing: The job shall include complete earthing of the DG set as per OEM standards.
1
850000
850000
... More
Clear water Stage 2nd OHT 1st
-
-
-
... More
Supply, providing, installation, successful testing and commissioning of vertical turbine pumping unit as per IS 1710 driven by VT motor for pumping water from sump of following parameters.
Site Condition
Altitude = 1600 Meters/Greater (AMSL)
Ambient Temperature = +40ºC to - 15ºC
Relative Humidity = 60%
Type of water = clear water having specific gravity of unity average.
Sump /liner Bed Level = 3m below from Machine floor level
Water column in liner/sump = 2.5 m from sump/liner bed level
G. PUMP
Discharge = 7000 GPH
Type = Self water lubricated, VT pump, open line shaft.
Liquid to be handled = clear Water
RPM = 1450
Head = 31 m
Efficiency = Not less than 65 %
Impeller = Semi-enclosed mixed flow all bronze/stainless steel Line shaft/ head shaft = Stainless steel
Impeller shaft = Stainless steel
Suction Strainer = MS fabricated
Suction Bowl/ Bell mouth = Cast Iron
Pump Bowl = Cast iron
Column pipe = Mild Steel as per site requirement.
VT Pump to be designed with minimum number of stages. H. Prime Mover
Type = Vertical hollow shaft, AC squirrel cage induction motor Power Supply = 03 Phase, 415V + 15% AC
Frequency = 50Hz + 3%
RPM = 1450 Synchronous
Efficiency = Not less than 80%
HP = As per head and discharge requirement of pump
Class of insulation = F or as per IS requirements
Motor thrust bearing = Anti friction ball /roller bearing
Method of starting = star/delta
The motor should be able to with stand fluctuations in voltage and should be conforming to latest IS specifications.
I. Accessories
Each pumping unit shall be provided with suitable discharge head with proper stiffening box arrangement , non-reverse ratchet, coupling etc as per standard specification besides all other accessories required for satisfactory performance and mechanical works required for installation of pumping unit at site are included in the job .
Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory and pumping unit is to be approved from the concerned authority before procuring.
2
600000
1200000
... More
Fabrication, providing and fitting of split type MS clamps 10 mm thick, 4 ft. long and 5 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts.
4
4500
18000
... More
Fabrication, providing, fitting of delivery manifold system for 02 no pumping units out of hot dip galvanized G.I, C-Class 100 mm Dia pipe as per site requirement with suitable no of bends / pipe Spacer of 100 mm nominal dia, reducers / increasers with - 18 mm thick flange, gaskets, blind flange, screw fasteners, tail piece with central web / T piece for fitting of washout valve and allied parts as per site requirement. The system is to be designed to with stand pressure of 16 Kgf / cm2. PRESSURE GAUGE (IS 3624)
The delivery of all the Pumps and Pump common header shall be provided with Dial type pressure gauges of suitable range complete with copper tubes and control cocks. The gauges shall be of direct mounting SS diaphragm sealed type. The dial size of each pressure gauge shall not be less than 100 / 150 mm. The M.O.C. shall be suitable for storm / raw water pumping installation. Each pressure gauge shall be complete with rubber of suitable class of enclosure. Accuracy shall be + / - 1% of full scale range or better. Scale range shall be selected so that normal system pressure is approximately 50 % of the full scale
specifications
Type - Top mounted (directly) diaphragm sealed type.
Reference standard- IS 3624
Range -As per annexed site requirement
Dial size - 100 / 150 mm.
Accuracy - + / - 1 %
M.O.C.:
Dial Cast -Aluminum
Flanges- SS 316
Internals-SS 304
Enclosure-Weather proof IP 65.
The work is to be execute at site by very skilled welder by shifting of desired tools and tackles as per directions of the site engineer, should be aesthetic and leak-proof.
1
70000
70000
... More
Check valves in delivery manifold
Providing and fitting of 100 mm Nominal Dia Check valve confirming to EN 1074-3 standard. Check valve shall be double flanged, slanted seat, tilting disc type. External damping unit shall be provided in the valve to reduce or eliminate the slamming effect. The Check Valve shall be double flanged free acting type, giving rapid non-slam closure & low head loss characteristics when door is in open position. The valves shall be used for water supply on line installations in upright positions. The valves shall be suitable for continuous use as their PN rating (PN1.0-1.6, in Mpa). The flanges and their dimensions of drilling shall be in accordance with IS 1538:1993. Face to face length of the valve shall be as per EN 558 – Series 14. The material & specification for different component parts of check valve given below: Body- Ductile Iron, IS:1865 Gr. 400-15 Disc - Ductile Iron, IS:1865 Gr. 400-15 Body seat ring - Stainless Steel, IS:6603 Gr. 04Cr19Ni9 / AISI-304 Retainer ring - Stainless Steel / Ductile Iron
Disc seal - EPDM Rubber
Shaft - Stainless Steel, IS:6603 Gr. 12Cr12 / AISI-410 Shaft bearing - Zinc free bronze Damping unit body - Ductile Iron, IS:1865 Gr. 400-15 Counters Weight - Manufacturer’s Std. Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating, d)Flow Direction. Valve shall be coated (both internally & externally) with Electrostatic epoxy powder coating (Blue, RAL5005). The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work .
2
128000
256000
... More
Resilient Seated Gate Valve delivery manifold and wash out Providing and fitting of 100 mm Nominal Dia Valves resilient / soft seated, bubble-tight, straight & pocket less body passage confirming to as per EN1171 / EN1074-1 & 2 / BS 5163 standard. Double flanged, non-rising spindle type (inside screw) design & Standard rotation shall be “clockwise” to close. Wedge shall be fully lined / encapsulated with EPDM rubber and WRAS approved (approved for drinking water). Valves should be of vacuum tight under low pressure condition and 100% leak proof when shut. Sluice Valves stem sealing shall not be not be of gland packing type, instead sealing by 3-O Ring system to ensure 100% leak tightness. Valve shall be suitable for PN 1.0 / PN1.6 (in Mpa) pressure rating. The flanges and their dimensions of drilling shall be in accordance with IS 1538:1993. Face to face length of the valve shall be as per DIN3202 F4 / IS 14846:2000 / BS 5163 / EN558:2008. The material & specification for different component parts of Gate valve given below: Body, Bonnet - Ductile Iron, Wedge - Ductile Iron encapsulated with EPDM Rubber Stem / Spindle - Stainless Steel
Wedge Nut - Brass, IS:6912 Leaded Brass Stem Seal, O-Ring - NBR Bonnet Bolts/Nuts - Carbon Steel (External Fasteners)
Hand Wheel - Ductile Iron / C.S. Fabricated
Bonnet Gasket EPDM Rubber Valves shall be operated by manually (by Hand wheel) Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating. The direction of rotation for OPEN, CLOSE position shall be marked on the hand wheel. Valve shall be coated (both internally & externally) with Electrostatic epoxy powder coating (Blue, RAL5005). The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
3
33000
99000
... More
Providing and fitting of 100 mm Nominal Dia Air Valve (Air Cushion Valve) to ensure system efficiency by air release and air intake during pumping in and draining out from the pipeline respectively. The valve should be specially designed to slowly exhaust the air that was admitted to the pipeline and to prevent the sudden rejoining of separated columns in a pipeline and the associated pressure surges or water hammer. Valves shall be complete with main body, top housing, outlet housing having opening for air escape, double inlet housing loaded with light spring, a cage holding a ball in lower side of outlet housing, an adjustable middle valve control orifice, gaskets and fasteners as per the requirement with integral body seat. A spring-loaded poppet with a brass seat and Neoprene sealing ring shall be provided to cover the top of the opening. The housing shall have a tapered outlet, the opening of which shall be adjustable by a tapered plug and Screw. The Air Valve shall be Flanged Type. The flange drilling dimensions shall be in accordance with IS 1538:1993. Air Valve shall be suitable for PN1.0 (in Mpa) pressure rating. The material & specification for different component parts of Air valve given below: Main Body, Outlet & Inlet Housing, Top Flange, Cage, Top Cover, Inlet Disc - Mild Steel Float - Wood (Rubber Coated) Top Housing, Poppet Valve Disc - Cast Iron
Seal Ring - Nitrile Rubber / Neoprene Rubber Seat, Bush - Brass/Bronze Gasket- Nitrile Rubber / EPDM Rubber Bolts & Nuts (External Fasteners) - Carbon Steel Poppet Spindle, Stem - S.S. Internal Fasteners - S.S. General Marking on the valve body shall be a) Brand/Logo, b) Size, c) PN Rating. Valve shall be (internally & externally) coated with Black Japan Paint, The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
1
105000
105000
... More
Providing, fitting of 100 mm Nominal Dia Zero Velocity Valve complete with shell, dome shaped internal cone, disc, spring, shaft, shaft sleeve, bush, end flanges and Fasteners as per the requirement with integral inspection window. The springs are to be designed in such a manner that the valve remains fully open when 25% to 125% of designed velocity is achieved. In case of closure of pump, disc starts closing in relation to decrease of velocity and fully closes when velocity drops near to zero. The valve is to be installed such a way that the entire length of water column is suitably divided in spite of differing gradients and undulations. The Zero velocity valves shall be mounted in any position i.e. horizontal, vertical or inclined pumping main. The Zero Velocity Valve shall be Flanged Type. The flange drilling dimensions shall be in accordance with IS 1538:1993. Valve shall be suitable for PN 1.0 (in Mpa) pressure rating & within the temperature range of 4⁰ C to 50⁰ C. The material & specification for different component parts of Zero Velocity valve given below: Inlet & Outlet Barrel/cone, Guide Dome/Internal Cone, Central Disc, Inlet & Outlet Struts, Inspection Door, Mounting Feet - Mild Steel (Fab.), IS:2062 Central Shaft - Stainless Steel, AISI-410 Seat Ring - Stainless Steel, AISI-304 Disc Seat/Seal - EPDM Rubber Spring - Spring Steel Bush Brass General Marking on the valve body shall be a) Brand/Logo, b) Size, c) PN Rating d) Flow Direction. Valve shall be (internally & externally) coated with Black Japan Paint
The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
1
75000
75000
... More
Rising Main
Providing, shifting, loading, unloading, stacking, of 100 mm Dia GI ( Class C) open ended, finished neatly, well galvanized on both inner and outer surfaces, and shall be free from cracks, surface flaws, laminations and other defects as per IS 1239-2004 for laying of rising main from (RD 0 to RD 200) from sump to storage reservoir with specifications as here as under Type – Plain Ended Diameter: Nominal Bore -100mm
Wall thickness: Class C
Tolerances for thickness, weight, length as per IS 1239-2004
Certificate – Manufactures with relevant IS code
Hydraulic tests for pressure.
Mechanical Tests.
Tensile tests. Are to be carried out by third party as per specifications of tender. The item includes shifting, installation, laying and fitting of the above flanged GI pipe, connecting end to end as per IS: 5822: Code of practice for laying of welded steel for pipes is to be adopted.
200
2300
460000
... More
Fabrication / providing / fitting of 100 mm Nominal dia of 18 mm thick MS flanges conforming to BIS 6392/1997 Table 17 to above GI pipes as per requirement includes Welding of flanges in two layers circumferentially in V-groove penetrating through the thickness of flanges. The welding shall be carried out with standard make IS marked electrodes, welding should be smooth & leak proof by shifting of DG set, welding machine, gas cutter with all other allied tools all along the laying contour of Pipe line at site for proper off set wedges etc.
80
1560
124800
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
Quantity for raising main : 0.6175 x 150 = 93 cum Under road way a minimum clear cover of 1.5m is to be provided, same can be modified to suit local conditions
93
256
23882.4
... More
Earth work in excavation in all kinds of soil by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
Quantity proposed : 0.6175 x 50 = 31 cum
31
479
14858.3
... More
Fabrication, Providing and fitting of long radius bend out of Class C G.I Pipe of length as per site requirement and flanged on both ends. The flanges are M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc. as per site requirement.
Nominal Dia - 100mm
6
6100
36600
... More
Providing / fitting of MS suitable sized nut bolt as per IS 1363 part 1
70
150
10500
... More
Providing / fitting of metallic raised face flange insertion gaskets for each flanged joints to make leak as per IS 638/79.
40
170
6800
... More
Filling available excavated earth in trenches, plinth, sides of foundation etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead up to 50 m and lift up to 1.5m.
Quantity: 90% of above earth work excavation.
110
264
29040
... More
Providing and laying of 300 mm dia S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS – 1536 to act sleeve for 100mm Dia raising main while crossing roads ( As per site requirement)
20
7304
146080
... More
Painting of 100 mm dia GI pipes with two coats of anti-corrosive bitumastic paint of approved quality in the premises of pump house by the departmentally approved shade and colour.
30
80
2400
... More
Fabrication, providing and fitting of 100 mm ND washout Tee with arm with arm length as per site requirement but not less than 1.5’x1.5’x1.5’. The Tee shall be fabricated out of G.I C-class pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends.
1
7500
7500
... More
Providing / fitting / installation / testing / commissioning of 100mm dia at Electromagnetic Insertion type Flow Meter with specifications
(a) Type - Electromagnetic type, insertion
(b) Pipe size - 100 mm © Ambient temperature of fluid - 0 to 100 deg C. (d) Accuracy - +/- 1% of flow rate
(e) Output - Square wave pulse, upto isolated (f) Electrode - Carbon graphite
(g) Power supply - 230 V AC / 110 V AC, 50 Hz 24V DC
(h) Velocity - 0.06 to 6.09 m/s
(i) Transmitter - Coated Aluminum
(j) Pressure - Up-to 13.8 kg / sq. cm
(k) Make – Krone Marshall , ABB , Rands (l) Display - 8 Digit LCD non- resettable type for totalized quantity (m) Retransmission output to SCADA- 4-20mA
(n) Damping - Adjustable from 5 to 30sec.
(o) Cable Entries - 4 No. for Remote Amplifier
(p) Humidity - 90% R. H. max. non condensing.
(q) Material of Housing - Al. Die cast
® Measurement results shall be independent of density, viscosity, pressure, temperature, solid-impurities and conductivity Variations (above 20 µS/cm).
(s) There shall be no additional pressure drop across the meter.
(t) Compatible with virtually all corrosive / non-corrosive Liquids.
(u) IP-65 class of protection shall be provided.
(v) Flow Measurement - shall be independent of velocity profile across the diameter of the pipe-line.
(w)Connection -Flanged End type (x) Discharge at site (10000 to 20000 GPH )
Further job includes all the cabling required at site & provisions for GSM service & allied woks needed at the site at time of installation.
1
200000
200000
... More
Providing, fitting, testing and commissioning of 25 KVA voltage stabilizer as per specifications below:
Capacity: 25 KVA
Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi- step.
Type of Regulator: Double plate type with electrolytic copper contacts.
Input voltage: 180-400 volts. (3 phase)
Output voltage: 400 ±10% volts.
Frequency: 50 ±3 C/S. Windings: Electrolytic grade copper of adequate section, vacuums impregnated and Oven-dried.
Insulation: Fibre glass insulations to tested parameters.
Cooling: Naturally, Oil cooled
Temp. Rise (Max) : 30°C above ambient
Mounting: On Uni-directional wheels.
Correction rate: 30 volts per step Wave form distortion: virtually nil Duty cycle: 100% continuous.
Enclosure: MS sheet enclosure in pressed CGR Sheet powder coated with radiators.
Core laminates: High grade, low eddy loss, grain oriented silicon steel laminations.
Load: Three phase induction motor load. Load Amperes (continuous) Overload in 24-hours operation: 10% above continuous Ampere rating. The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped, test certificate and shall have name plate with specifications.
Standard Fittings & Accessories 1. Terminal for incoming & outgoing with suitable insulating arrangements.
2. Input output & earth terminal shall be marked clearly.
3. Earthing terminals - 02 Nos
4. Lifting Lugs for core and complete stabilizers.
5. Oil drain valve with plugs of cover plate.
6. Oil filling hole with cover.
7.Front wheels should be unidirectional
8. Operating Wheel for manual operation.
2
80000
160000
... More
Supply, Fabrication, installation and fitting of Modular motor control panel to be fitted with accessories strictly in line with the relevant IS codes and standards with all latest amendments till date if any The broad band technical details shall be as under Broad Band technical details :
Enclosure Details =
Type = Cubical
a. Free Standing, Floor mounted, Compartmentalized Design
b. Protection class = IP-55
c. Openings and vents = As required
d. Painting = As per IS standards qualifying IP 55 requirements. e. Doors = shall be suitably hinged to ensure uniform pressure right along the rubber beading. Doors shall be lockable with special type operated locks. Hinges shall be zinc die – castings or stainless steel.
f. Application = Indoor
g. Cable Entry = Bottom /side
h. Space for equipments = Bus bar, Main MCCB, MPCB, FASD starters, Multi Function meters (motor protection units), Indicating amps, Digital Voltmeters, and Ammeters, Earth Fault meters
A. Bus bar Chamber: The bus bar chamber shall be fitted at the top of the panel vertically / horizontally throughout the length as per requirement. 1. No of bus bars = 4 Nos. ( 3 phase and 1 No neutral) 2. Material of bus bar= COPPER 3. Rating = 200 Ampere. 4. The bus bar shall be qualifying IP 55 Requirements. B. Main Circuit Breaker (Incomer MCCB):
• 1.Type = MCCB • 2.Qty = 1 Nos
• 3.No. of poles = 4
• 4.Rated current = 100 Amp
• 5.Operation = Extended Rotary Handle • 6.Rated operational voltage = 415 V ± 15%
• 7.Rated frequency = 50 ± 3% Hz • 8.Ultimate S.C Breaking cap at (415 volts A C, 50 Hz) = 50 KA
1
420000
420000
... More
9.Type of release = Microprocessor Motor Protection Release with adjustable Overload & short Circuit C. Change over Switch: 1.Qty. = 01 No. 2.Rating = 63 Amp (400 +15%V, 50 + 3%Hz) 3.Type = Front operated, on load, 4 pole,
D. Circuit Breakers outgoing for FASD starters 1.Type = MPCB (63 Amp) 2. Qty = 03 Nos 3.Duty Range = (28-40) 4.Rated operational voltage = 415 V ± 15% 5. Rated frequency = 50 ± 3% Hz 6.Ultimate S.C Breaking capacity at (415 volts A C, 50 Hz) = 50 KA E. Auxiliary MCCB for Heating / Lighting:
1. Circuit Breaker = MCCB (Outgoing)
2. Qty. = 1 No.
3. No. of poles = 4P
4. Current Rating = 32 Amp. 5.Rated operational voltage = 415 V + 15 % 6.Ultimate S.C Breaking Capacity at (415V AC, 50 Hz) = 36KA
F. Variable Frequency Drive (VFD) for DG set operation
Rating -11 KW (HD) / 15 KW (ND)
Phase- 3-phase
Voltage-415 V± 15%
Built in PLC Functionality
Built in Brake control
Multi Keypad
Built in RS485 Modibus RTU Communication.
Make- L&T/ABB/Schneider
CAT No- LTVF-S40038BAA (L&T). The ABB , Schneider driver shall have equipped/ comparable/ features that are associated with above listed model of L&T
Quantity – 01 No
g. G.FASD Starter h. Qty: 02 each
-
-
-
... More
Main Contractor: 40 AC3P AC3 Rating Delta Contactor: 40 AC3P AC3 Rating
Star Contactor: 28 AC3P Rating Contactors shall conform to IEC standards or equivalent for motor starting contactors. Capacities of the contactors shall be carefully selected leaving sufficient extra capacity, according to the AC – 3 rating
Thermal Overload Relay (23-32) – 01
Star Delta Timer (0-60 Sec) – 01
Three ammeters to rated phase currents and ammeters shall be marked according to the phase designations.
Indicator lamps to indicate following:
Pump running
Pump tripped (overload) Pump stopped
Pump tripped (low water level)
Hours run meter
Dry run protection
Single phase preventor.
Outgoing terminals
2 pole – MCB for control supply
ON/OFF push buttons to be provided on the front door
Emergency stop push button to be provided.
H. Motor Protection Units ( MPU)
1. Operation – Auto manual
2. Display - LED/LCD
3. Overload protection set point user selectable
4. Under load protection set point user selectable
5. Single Phasing Protection
6. Reverse Phasing Protection
7. Unbalance Protection
8. Over Voltage Protection set point user selectable.
9. Under Voltage Protection set point user selectable.
10. Quantity -02 No
-
-
-
... More
i. I.20 KVAR Capacitor Bank
• Capacitor 20 KVAR Phi Cap Heavy Duty – 01
• Contactor Capacitor Duty 25 KVAR – 01
• MCB TP 63A C Curve - 01
• On Delay Timer 0-60Sec – 01
Capacitor Bank to be connected in such a way that it will get on after 10-15 Sec of Start Delay.
J. Instrument Transformers: Auxiliary wiring of the starters to be done through
415/220V PT 500VA Burden
PT 415V/220V 500 VA Burden
• Qty: 01
K. Auxiliary Protection
1. Water level control relay with all wirings and capsules
2 Earth Fault Relay - Earth fault, ground fault monitoring MCB - MCB SP, 10A (10 Ki) Display Parameters Voltage (line / phase) Current (line / phase) 3ø power (Active, Apparent) 3ø Power factor Frequency Energy
Meters
1. Digital ammeter of range 0-63 A (01 no for each starter)
2. Digital voltmeter of range 0-500 V -01 No
3. Digital frequency meter (01 No)
Stand Shall be fabrication out of structural steel 0.45 m height with castor wheels having locking arrangement as per weight and specifications of panel body. Note :- 1. Any specification not mentioned in the estimate for execution of the above works not specifically specified or mentioned shall have to be taken care of / or shall be considered during execution of work.
2. The equipment so manufactured / fabricated shall be certified by the manufacturer / Supplier, that it with stands all relevant codes and procedures as per IS norms and specifications laid down
-
-
-
... More
Clear water Stage 2nd OHT 2nd
-
-
-
... More
Supply, providing, installation, successful testing and commissioning of vertical turbine pumping unit as per IS 1710 driven by VT motor for pumping water from sump of following parameters.
Site Condition
Altitude = 1600 Meters/Greater (AMSL)
Ambient Temperature = +40ºC to - 15ºC
Relative Humidity = 60%
Type of water = clear water having specific gravity of unity average.
Sump /liner Bed Level = 3m below from Machine floor level
Water column in liner/sump = 2.5 m from sump/liner bed level
G. PUMP
Discharge = 7000 GPH
Type = Self water lubricated, VT pump, open line shaft.
Liquid to be handled = clear Water
RPM = 1450
Head = 31 m
Efficiency = Not less than 65 %
Impeller = Semi-enclosed mixed flow all bronze/stainless steel Line shaft/ head shaft = Stainless steel
Impeller shaft = Stainless steel
Suction Strainer = MS fabricated
Suction Bowl/ Bell mouth = Cast Iron
Pump Bowl = Cast iron
Column pipe = Mild Steel as per site requirement.
VT Pump to be designed with minimum number of stages. H. Prime Mover
Type = Vertical hollow shaft, AC squirrel cage induction motor Power Supply = 03 Phase, 415V + 15% AC
Frequency = 50Hz + 3%
RPM = 1450 Synchronous
Efficiency = Not less than 80%
HP = As per head and discharge requirement of pump
Class of insulation = F or as per IS requirements
Motor thrust bearing = Anti friction ball /roller bearing
Method of starting = star/delta
The motor should be able to with stand fluctuations in voltage and should be conforming to latest IS specifications.
I. Accessories
Each pumping unit shall be provided with suitable discharge head with proper stiffening box arrangement , non-reverse ratchet, coupling etc as per standard specification besides all other accessories required for satisfactory performance and mechanical works required for installation of pumping unit at site are included in the job .
Note: Providing of test certificate & Characteristic Curve of pumping equipment is compulsory and pumping unit is to be approved from the concerned authority before procuring.
2
550000
1100000
... More
Fabrication, providing and fitting of split type MS clamps 10 mm thick, 4 ft. long and 5 inch wide for lowering and holding of pumping unit fitted. The job includes the cost of required size of nuts and bolts.
4
4000
16000
... More
Fabrication, providing, fitting of delivery manifold system for 02 no pumping units out of hot dip galvanized G.I, C-Class 100 mm Dia pipe as per site requirement with suitable no of bends / pipe Spacer of 100 mm nominal dia, reducers / increasers with - 18 mm thick flange, gaskets, blind flange, screw fasteners, tail piece with central web / T piece for fitting of washout valve and allied parts as per site requirement. The system is to be designed to with stand pressure of 16 Kgf / cm2. PRESSURE GAUGE (IS 3624)
The delivery of all the Pumps and Pump common header shall be provided with Dial type pressure gauges of suitable range complete with copper tubes and control cocks. The gauges shall be of direct mounting SS diaphragm sealed type. The dial size of each pressure gauge shall not be less than 100 / 150 mm. The M.O.C. shall be suitable for storm / raw water pumping installation. Each pressure gauge shall be complete with rubber of suitable class of enclosure. Accuracy shall be + / - 1% of full scale range or better. Scale range shall be selected so that normal system pressure is approximately 50 % of the full scale
specifications
Type - Top mounted (directly) diaphragm sealed type.
Reference standard- IS 3624
Range -As per annexed site requirement
Dial size - 100 / 150 mm.
Accuracy - + / - 1 %
M.O.C.:
Dial Cast -Aluminum
Flanges- SS 316
Internals-SS 304
Enclosure-Weather proof IP 65.
The work is to be execute at site by very skilled welder by shifting of desired tools and tackles as per directions of the site engineer, should be aesthetic and leak-proof.
1
45000
45000
... More
Check valves in delivery manifold
Providing and fitting of 100 mm Nominal Dia Check valve confirming to EN 1074-3 standard. Check valve shall be double flanged, slanted seat, tilting disc type. External damping unit shall be provided in the valve to reduce or eliminate the slamming effect. The Check Valve shall be double flanged free acting type, giving rapid non-slam closure & low head loss characteristics when door is in open position. The valves shall be used for water supply on line installations in upright positions. The valves shall be suitable for continuous use as their PN rating (PN1.0-1.6, in Mpa). The flanges and their dimensions of drilling shall be in accordance with IS 1538:1993. Face to face length of the valve shall be as per EN 558 – Series 14. The material & specification for different component parts of check valve given below: Body- Ductile Iron, IS:1865 Gr. 400-15 Disc - Ductile Iron, IS:1865 Gr. 400-15 Body seat ring - Stainless Steel, IS:6603 Gr. 04Cr19Ni9 / AISI-304 Retainer ring - Stainless Steel / Ductile Iron
Disc seal - EPDM Rubber
Shaft - Stainless Steel, IS:6603 Gr. 12Cr12 / AISI-410 Shaft bearing - Zinc free bronze Damping unit body - Ductile Iron, IS:1865 Gr. 400-15 Counters Weight - Manufacturer’s Std. Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating, d)Flow Direction. Valve shall be coated (both internally & externally) with Electrostatic epoxy powder coating (Blue, RAL5005). The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work .
2
120000
240000
... More
Resilient Seated Gate Valve delivery manifold and wash out Providing and fitting of 100 mm Nominal Dia Valves resilient / soft seated, bubble-tight, straight & pocket less body passage confirming to as per EN1171 / EN1074-1 & 2 / BS 5163 standard. Double flanged, non-rising spindle type (inside screw) design & Standard rotation shall be “clockwise” to close. Wedge shall be fully lined / encapsulated with EPDM rubber and WRAS approved (approved for drinking water). Valves should be of vacuum tight under low pressure condition and 100% leak proof when shut. Sluice Valves stem sealing shall not be not be of gland packing type, instead sealing by 3-O Ring system to ensure 100% leak tightness. Valve shall be suitable for PN 1.0 / PN1.6 (in Mpa) pressure rating. The flanges and their dimensions of drilling shall be in accordance with IS 1538:1993. Face to face length of the valve shall be as per DIN3202 F4 / IS 14846:2000 / BS 5163 / EN558:2008. The material & specification for different component parts of Gate valve given below: Body, Bonnet - Ductile Iron, Wedge - Ductile Iron encapsulated with EPDM Rubber Stem / Spindle - Stainless Steel
Wedge Nut - Brass, IS:6912 Leaded Brass Stem Seal, O-Ring - NBR Bonnet Bolts/Nuts - Carbon Steel (External Fasteners)
Hand Wheel - Ductile Iron / C.S. Fabricated
Bonnet Gasket EPDM Rubber Valves shall be operated by manually (by Hand wheel) Marking on the valve body shall be as cast and general markings on the valve required are a) Brand/Logo, b) Size, c) PN Rating. The direction of rotation for OPEN, CLOSE position shall be marked on the hand wheel. Valve shall be coated (both internally & externally) with Electrostatic epoxy powder coating (Blue, RAL5005). The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
3
25000
75000
... More
Providing and fitting of 100 mm Nominal Dia Air Valve (Air Cushion Valve) to ensure system efficiency by air release and air intake during pumping in and draining out from the pipeline respectively. The valve should be specially designed to slowly exhaust the air that was admitted to the pipeline and to prevent the sudden rejoining of separated columns in a pipeline and the associated pressure surges or water hammer. Valves shall be complete with main body, top housing, outlet housing having opening for air escape, double inlet housing loaded with light spring, a cage holding a ball in lower side of outlet housing, an adjustable middle valve control orifice, gaskets and fasteners as per the requirement with integral body seat. A spring-loaded poppet with a brass seat and Neoprene sealing ring shall be provided to cover the top of the opening. The housing shall have a tapered outlet, the opening of which shall be adjustable by a tapered plug and Screw. The Air Valve shall be Flanged Type. The flange drilling dimensions shall be in accordance with IS 1538:1993. Air Valve shall be suitable for PN1.0 (in Mpa) pressure rating. The material & specification for different component parts of Air valve given below: Main Body, Outlet & Inlet Housing, Top Flange, Cage, Top Cover, Inlet Disc - Mild Steel Float - Wood (Rubber Coated) Top Housing, Poppet Valve Disc - Cast Iron
Seal Ring - Nitrile Rubber / Neoprene Rubber Seat, Bush - Brass/Bronze Gasket- Nitrile Rubber / EPDM Rubber Bolts & Nuts (External Fasteners) - Carbon Steel Poppet Spindle, Stem - S.S. Internal Fasteners - S.S. General Marking on the valve body shall be a) Brand/Logo, b) Size, c) PN Rating. Valve shall be (internally & externally) coated with Black Japan Paint, The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work
1
82500
82500
... More
Providing, fitting of 100 mm Nominal Dia Zero Velocity Valve complete with shell, dome shaped internal cone, disc, spring, shaft, shaft sleeve, bush, end flanges and Fasteners as per the requirement with integral inspection window. The springs are to be designed in such a manner that the valve remains fully open when 25% to 125% of designed velocity is achieved. In case of closure of pump, disc starts closing in relation to decrease of velocity and fully closes when velocity drops near to zero. The valve is to be installed such a way that the entire length of water column is suitably divided in spite of differing gradients and undulations. The Zero velocity valves shall be mounted in any position i.e. horizontal, vertical or inclined pumping main. The Zero Velocity Valve shall be Flanged Type. The flange drilling dimensions shall be in accordance with IS 1538:1993. Valve shall be suitable for PN 1.0 (in Mpa) pressure rating & within the temperature range of 4⁰ C to 50⁰ C. The material & specification for different component parts of Zero Velocity valve given below: Inlet & Outlet Barrel/cone, Guide Dome/Internal Cone, Central Disc, Inlet & Outlet Struts, Inspection Door, Mounting Feet - Mild Steel (Fab.), IS:2062 Central Shaft - Stainless Steel, AISI-410 Seat Ring - Stainless Steel, AISI-304 Disc Seat/Seal - EPDM Rubber Spring - Spring Steel Bush Brass General Marking on the valve body shall be a) Brand/Logo, b) Size, c) PN Rating d) Flow Direction. Valve shall be (internally & externally) coated with Black Japan Paint
The job includes providing and fitting of 02 nos. M.S flanges perfectly adaptable to the inbuilt flanges of the valve which are to be fitted with delivery manifold of the pumping unit at appropriate spots as per site requirement and cost on account of Nuts, bolts, gaskets, etc. required for the job is included in the scope of work.
1
46000
46000
... More
Rising Main
Providing, shifting, loading, unloading, stacking, of 100 mm Dia GI ( Class C) open ended, finished neatly, well galvanized on both inner and outer surfaces, and shall be free from cracks, surface flaws, laminations and other defects as per IS 1239-2004 for laying of rising main from (RD 0 to RD 200) from sump to storage reservoir with specifications as here as under Type – Plain Ended Diameter: Nominal Bore -100mm
Wall thickness: Class C
Tolerances for thickness, weight, length as per IS 1239-2004
Certificate – Manufactures with relevant IS code
Hydraulic tests for pressure.
Mechanical Tests.
Tensile tests. Are to be carried out by third party as per specifications oftender. The item includes shifting, installation, laying and fitting of the above flanged GI pipe, connecting end to end as per IS: 5822: Code of practice for laying of welded steel for pipes is to be adopted.
200
1520
304000
... More
Fabrication / providing / fitting of 100 mm Nominal dia of 18 mm thick MS flanges conforming to BIS 6392/1997 Table 17 to above GI pipes as per requirement includes Welding of flanges in two layers circumferentially in V-groove penetrating through the thickness of flanges. The welding shall be carried out with standard make IS marked electrodes, welding should be smooth & leak proof by shifting of DG set, welding machine, gas cutter with all other allied tools all along the laying contour of Pipe line at site for proper off set wedges etc.
80
1000
80000
... More
Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
Quantity for raising main : 0.6175 x 150 = 93 cum Under road way a minimum clear cover of 1.5m is to be provided, same can be modified to suit local conditions
93
256
23882.4
... More
Earth work in excavation in all kinds of soil by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
Quantity proposed : 0.6175 x 50 = 31 cum
31
479
14858.3
... More
Fabrication, Providing and fitting of long radius bend out of Class C G.I Pipe of length as per site requirement and flanged on both ends. The flanges are M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) and welded on both sides. The job includes nuts, bolts, gaskets etc. as per site requirement.
Nominal Dia - 100mm
6
6100
36600
... More
Providing / fitting of MS suitable sized nut bolt as per IS 1363 part 1
70
150
10500
... More
Providing / fitting of metallic raised face flange insertion gaskets for each flanged joints to make leak as per IS 638/79.
40
105
4200
... More
Filling available excavated earth in trenches, plinth, sides of foundation etc. In layers not exceeding 20 cm in depth, consolidating each deposited layer by reaming and watering, lead up to 50 m and lift up to 1.5m.
Quantity: 90% of above earth work excavation.
110
264
29040
... More
Providing and laying of 300 mm dia S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS – 1536 to act sleeve for 100mm Dia raising main while crossing roads ( As per site requirement)
20
6097
121940
... More
Painting of 100 mm dia GI pipes with two coats of anti-corrosive bitumastic paint of approved quality in the premises of pump house by the departmentally approved shade and colour.
30
60
1800
... More
Fabrication, providing and fitting of 100 mm ND washout Tee with arm with arm length as per site requirement but not less than 1.5’x1.5’x1.5’. The Tee shall be fabricated out of G.I C-class pipe with M.S Flanges conforming to BIS 6392/1997 Table 17 (Rating PN16) fastened with weld joints on three ends.
1
9500
9500
... More
Providing / fitting / installation / testing / commissioning of 100mm dia at Electromagnetic Insertion type Flow Meter with specifications
(a) Type - Electromagnetic type, insertion
(b) Pipe size - 100 mm © Ambient temperature of fluid - 0 to 100 deg C. (d) Accuracy - +/- 1% of flow rate
(e) Output - Square wave pulse, upto isolated (f) Electrode - Carbon graphite
(g) Power supply - 230 V AC / 110 V AC, 50 Hz 24V DC
(h) Velocity - 0.06 to 6.09 m/s
(i) Transmitter - Coated Aluminum
(j) Pressure - Up-to 13.8 kg / sq. cm
(k) Make – Krone Marshall , ABB , Rands (l) Display - 8 Digit LCD non- resettable type for totalized quantity (m) Retransmission output to SCADA- 4-20mA
(n) Damping - Adjustable from 5 to 30sec.
(o) Cable Entries - 4 No. for Remote Amplifier
(p) Humidity - 90% R. H. max. non condensing.
(q) Material of Housing - Al. Die cast
® Measurement results shall be independent of density, viscosity, pressure, temperature, solid-impurities and conductivity Variations (above 20 µS/cm).
(s) There shall be no additional pressure drop across the meter.
(t) Compatible with virtually all corrosive / non-corrosive Liquids.
(u) IP-65 class of protection shall be provided.
(v) Flow Measurement - shall be independent of velocity profile across the diameter of the pipe-line.
(w)Connection -Flanged End type (x) Discharge at site (10000 to 20000 GPH )
Further job includes all the cabling required at site & provisions for GSM service & allied woks needed at the site at time of installation.
1
150000
150000
... More
Providing, fitting, testing and commissioning of 25 KVA voltage stabilizer as per specifications below:
Capacity: 25 KVA
Type of voltage controller: Manually operated copper wound, 3-phase, AC power supply multi- step.
Type of Regulator: Double plate type with electrolytic copper contacts.
Input voltage: 180-400 volts. (3 phase)
Output voltage: 400 ±10% volts.
Frequency: 50 ±3 C/S. Windings: Electrolytic grade copper of adequate section, vacuums impregnated and Oven-dried.
Insulation: Fibre glass insulations to tested parameters.
Cooling: Naturally, Oil cooled
Temp. Rise (Max) : 30°C above ambient
Mounting: On Uni-directional wheels.
Correction rate: 30 volts per step Wave form distortion: virtually nil Duty cycle: 100% continuous.
Enclosure: MS sheet enclosure in pressed CGR Sheet powder coated with radiators.
Core laminates: High grade, low eddy loss, grain oriented silicon steel laminations.
Load: Three phase induction motor load. Load Amperes (continuous) Overload in 24-hours operation: 10% above continuous Ampere rating. The voltage stabilizer shall have T-oil level indicator gauge preferably glass type tube or otherwise visible to naked eye. The top of the container to have a display panel for housing 02 numbers voltmeters (0-500V) along with 4-way selector switch and set of neon indicators for incoming and outgoing phases (06 No’s).Insulating media (T. Oil) of 11 KVA grade to be provided and filled up to top level. The T-Oil of specific grade should be provided in separate barrels and filled at site up to top level. The voltage Stabilizer shall be accepted with manufacturers dully stamped, test certificate and shall have name plate with specifications.
Standard Fittings & Accessories 1. Terminal for incoming & outgoing with suitable insulating arrangements.
2. Input output & earth terminal shall be marked clearly.
3. Earthing terminals - 02 Nos
4. Lifting Lugs for core and complete stabilizers.
5. Oil drain valve with plugs of cover plate.
6. Oil filling hole with cover.
7.Front wheels should be unidirectional
8. Operating Wheel for manual operation
2
70000
140000
... More
Supply, Fabrication, installation and fitting of Modular motor control panel to be fitted with accessories strictly in line with the relevant IS codes and standards with all latest amendments till date if any The broad band technical details shall be as under Broad Band technical details :
Enclosure Details =
Type = Cubical
a. Free Standing, Floor mounted, Compartmentalized Design
b. Protection class = IP-55
c. Openings and vents = As required
d. Painting = As per IS standards qualifying IP 55 requirements. e. Doors = shall be suitably hinged to ensure uniform pressure right along the rubber beading. Doors shall be lockable with special type operated locks. Hinges shall be zinc die – castings or stainless steel.
f. Application = Indoor
g. Cable Entry = Bottom /side
h. Space for equipments = Bus bar, Main MCCB, MPCB, FASD starters, Multi Function meters (motor protection units), Indicating amps, Digital Voltmeters, and Ammeters, Earth Fault meters
A. Bus bar Chamber: The bus bar chamber shall be fitted at the top of the panel vertically / horizontally throughout the length as per requirement. 1. No of bus bars = 4 Nos. ( 3 phase and 1 No neutral) 2. Material of bus bar= COPPER 3. Rating = 200 Ampere. 4. The bus bar shall be qualifying IP 55 Requirements. B. Main Circuit Breaker (Incomer MCCB):
• 1.Type = MCCB • 2.Qty = 1 Nos
• 3.No. of poles = 4
• 4.Rated current = 100 Amp
• 5.Operation = Extended Rotary Handle • 6.Rated operational voltage = 415 V ± 15%
• 7.Rated frequency = 50 ± 3% Hz • 8.Ultimate S.C Breaking cap at (415 volts A C, 50 Hz) = 50 KA 9.Type of release = Microprocessor Motor Protection Release with adjustable Overload & short Circuit
1
380000
380000
... More
C. Change over Switch: 1.Qty. = 01 No. 2.Rating = 63 Amp (400 +15%V, 50 + 3%Hz) 3.Type = Front operated, on load, 4 pole,
D. Circuit Breakers outgoing for FASD starters 1.Type = MPCB (63 Amp) 2. Qty = 03 Nos 3.Duty Range = (28-40) 4.Rated operational voltage = 415 V ± 15% 5. Rated frequency = 50 ± 3% Hz 6.Ultimate S.C Breaking capacity at (415 volts A C, 50 Hz) = 50 KA E. Auxiliary MCCB for Heating / Lighting:
1. Circuit Breaker = MCCB (Outgoing)
2. Qty. = 1 No.
3. No. of poles = 4P
4. Current Rating = 32 Amp. 5.Rated operational voltage = 415 V + 15 % 6.Ultimate S.C Breaking Capacity at (415V AC, 50 Hz) = 36KA
F. Variable Frequency Drive (VFD) for DG set operation
Rating -11 KW (HD) / 15 KW (ND)
Phase- 3-phase
Voltage-415 V± 15%
Built in PLC Functionality
Built in Brake control
Multi Keypad
Built in RS485 Modibus RTU Communication.
Make- L&T/ABB/Schneider
CAT No- LTVF-S40038BAA (L&T). The ABB , Schneider driver shall have equipped/ comparable/ features that are associated with above listed model of L&T
Quantity – 01 No
g. G.FASD Starter h. Qty: 02 each
-
-
-
... More
Main Contractor: 40 AC3P AC3 Rating Delta Contactor: 40 AC3P AC3 Rating
Star Contactor: 28 AC3P Rating Contactors shall conform to IEC standards or equivalent for motor starting contactors. Capacities of the contactors shall be carefully selected leaving sufficient extra capacity, according to the AC – 3 rating
Thermal Overload Relay (23-32) – 01
Star Delta Timer (0-60 Sec) – 01
Three ammeters to rated phase currents and ammeters shall be marked according to the phase designations.
Indicator lamps to indicate following:
Pump running
Pump tripped (overload) Pump stopped
Pump tripped (low water level)
Hours run meter
Dry run protection
Single phase preventor.
Outgoing terminals
2 pole – MCB for control supply
ON/OFF push buttons to be provided on the front door
Emergency stop push button to be provided.
H. Motor Protection Units ( MPU)
1. Operation – Auto manual
2. Display - LED/LCD
3. Overload protection set point user selectable
4. Under load protection set point user selectable
5. Single Phasing Protection
6. Reverse Phasing Protection
7. Unbalance Protection
8. Over Voltage Protection set point user selectable.
9. Under Voltage Protection set point user selectable.
10. Quantity -02 No
-
-
-
... More
i. I.20 KVAR Capacitor Bank
• Capacitor 20 KVAR Phi Cap Heavy Duty – 01
• Contactor Capacitor Duty 25 KVAR – 01
• MCB TP 63A C Curve - 01
• On Delay Timer 0-60Sec – 01
Capacitor Bank to be connected in such a way that it will get on after 10-15 Sec of Start Delay.
J. Instrument Transformers: Auxiliary wiring of the starters to be done through
415/220V PT 500VA Burden
PT 415V/220V 500 VA Burden
• Qty: 01
K. Auxiliary Protection
1. Water level control relay with all wirings and capsules
2 Earth Fault Relay - Earth fault, ground fault monitoring MCB - MCB SP, 10A (10 Ki) Display Parameters Voltage (line / phase) Current (line / phase) 3ø power (Active, Apparent) 3ø Power factor Frequency Energy
Meters
1. Digital ammeter of range 0-63 A (01 no for each starter)
2. Digital voltmeter of range 0-500 V -01 No
3. Digital frequency meter (01 No)
Stand Shall be fabrication out of structural steel 0.45 m height with castor wheels having locking arrangement as per weight and specifications of panel body. Note :- 1. Any specification not mentioned in the estimate for execution of the above works not specifically specified or mentioned shall have to be taken care of / or shall be considered during execution of work.
2. The equipment so manufactured / fabricated shall be certified by the manufacturer / Supplier, that it with stands all relevant codes and procedures as per IS norms and specifications laid down
-
-
-
... More
Combined Equipments Clear Water Stage 2nd OHT 2nd (Stage 1st and OHT 2nd)
-
-
-
... More
Providing Structural steel in built up sections , trusses and framed work, including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer all complete welded members for 2 MT capacity gantry systems, Motor base frame, DG set shed, transformer bed, cable trays , pipe blocks, Employee bed and transformer bed with gantry, trash racks, trusses and all allied steel structures required at site The quantity of the steel members like ISMB , MS chequered sheet ,ISMC , ISA , railing pipe ,MS pipes, angles, Flats , prefabricated grills may vary as per site requirement as it is conditional to civil structures being constructed.
2000
127
255000
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes
1000
142
142900
... More
Design, manufacturing, providing, fitting, testing & commissioning of 100 KVA distribution transformer with built in AVR (Buck Boost type) and outdoor type step less regulator involves specifications furnished below:
Buck Boost distribution transformer
Capacity - 100 KVA HV voltage - 6 KV to 12 KV
No. of phases - 03
Frequency - 50Hz
Type - Outdoor type
HV & LV windings - Copper wound
Tap changer - on HV side Tap changer type - Off load tap changer
Tap ratio - ±5% in step of 2.5% each
Vector - Dyn11
Impedance - 4.5%
Top oil temperature rise - 500C
Winding temperature rise by resistance - 550C
Efficiency at full load at UPF - 98.9%
Duty cycle - 100% continuous HV current - 4.81 Amps to 9.62 Amps
LV current - 133.34 Amps
No load losses - 0.17% of the rated capacity.
Winding - copper wound.
Termination - Bimetal connectors on HV & LV bushing.
Method of cooling - ONAN.
Paint type - Epoxy light grey.
Type of oil - Mineral Oil.
Stamping used (CORE) - CRGO of low loss.
Copper - Electrolytic grade
Transformer oil - IS 335 standard.
Standard adopted - IS 2026/1977
The job includes following standard fittings/ accessories:
Name, rating and Terminal Marking Plate,
Dehydrating Silica Gel Breather,
Thermometer Pocket,
Plain Unidirectional CI Rollers,
Lifting Lugs,
Conservator with Oil Filling Hole,
Plain Oil Level Indicator,
Earthing Terminals,
Filter value with plug,
Air release Plug,
Dial type temperature gauge and cooling radiators. Step less Regulator Capacity - 100 KVA
Input voltage -415 V
Type - Outdoor type
Winding - Copper wound
Vector - Yy0 (Star connected)
Current rating - 100 A, 3 phase
Connection - Star connected
Efficiency at full load at UPF - 99%
Duty cycle.- 100% continuous
No load losses - 0.12% of the rated capacity.
Load losses.- 0.5% of the rated capacity No. of rollers - 12 no. ELCA Grade Carbon
Method of cooling.- ONAN
Top oil temperature rise ≤500C above ambient
Voltage per turn -0.8-0.9 V/turn
Paint type -Epoxy light grey
Transformer Oil -IS 335 standard
Stamping used (Core) -CRGO of low loss.
Copper - Electrolytic grade
Micro switch -2
Servo Motor -20 Kg-cm
Motor Type - 1 Ph., 0.0008 HP
Roller current - Suitable for 50 Amps/Roller
Technology - Linear Type Rolling Technology
IS standard - IS-9815
Termination - Suitable copper bus bars to be provided in the termination box
Expected working life -More than 20 years
Control panel - Control panel shall be provided separately for indoor application, fitted with control cards and desired size conductor and other related accessories as per site requirements
The job includes Providing, installation, testing of 60 meters of power cable for working voltage up to and including 1100 volts; 50mm sq. armoured aluminium 3.5 core cables as the cabling from & to input/output terminals of HT/LT distribution transformer/ Automatic voltage regulator. Cost includes laying of cable in 3” dia slippery conduit as per site requirement included is termination of ends with suitable aluminium, tube terminals dully crimpled & taped. Make Gloster, Havel’s, National, and Legend
1
980000
980000
... More
Providing and fitting G.I Channel /Angle/ Flat of sizes including clamps ( for transformer bed, taping point , brackets of poles etc)
415
150
62250
... More
Supply, Installation, Testing and commissioning of Polymeric Gang operated Air break switch, outdoor type, triple pole, suitable for vertical installation, single break provided with locking arrangement at both ON and OFF position consisting of HT post double insulator, copper or copper alloy high pressure heavy contact assembly, rod with bearings , operating handle and 2 length of 32mm dia. GI pipe conforming to IS 1818 1961, 06 No. of insulators, rated voltage 6.6 KV 200A complete as per IS specs(01 no. at existing tapping point and another at existing substation).
1
12000
12000
... More
Supply, Installation, Testing and commissioning of 6.6 KV polymer fuses Set Horn Gap 3-phase 200 A suitable for vertical installation.
1
5000
5000
... More
Supply, Installation, Testing and commissioning of Gapless Surge arrestor station class, 10KA, 9KV, LA With polymer housing, Station Type.
1
8000
8000
... More
Supply and fitting of 6.6 KV polymeric composite pin insulator 12 KV, 5KN, Lighting impulse 75KV Positive, and 80 KV Negative , creepage distance 320 mm
48
350
16800
... More
Supply, installation, erection of 9 Mtrs long H.T pole of specifications ST-410 (SP-33). The job further includes drilling of holes for installation of various accessories .wherever required the job further includes G.I wire earthing of pole, concreting and allied operations as per REC standard
18
27000
486000
... More
P/F of Galvanized nuts, bolts of various sizes as per site requirement for fitment of electric substation, poles etc
90
150
13500
... More
P/F Danger Plate with clamps
18
175
3150
... More
Providing and fixing G.I Barbed wire as anti-climbing devices
18
160
2880
... More
Providing and fitting of Galvanized stay set with 50 X 8 mm Stay Clamp , Guy insulator (2no.), Anchor plate (200X200X6mm) , nuts and bolts , 2 N0- turn buckle , 1.8 m long , 16 mm diameter solid G.I stay rod & 7/3.15 mm dia. G.I stranded wire complete.
6
5000
30000
... More
Painting of poles by Red oxide
9
400
3600
... More
Painting of poles Aluminum paint
9
600
5400
... More
P/L of ACSR conductor as per IS 398 (0.05)
60
60
3600
... More
Providing and fitting of PG clamps.
4
450
1800
... More
P/F of 11 KV cable termination kit for connecting 35 Sq mm XLPE cable (ABC type) with the existing HT line near tapping point and HT transformer.
2
9000
18000
... More
Supply, installation, testing of 35 Sqr mm XLPE HT cable (ABC type) for 11 KV grade with cross sectional area 3x35.
30
900
27000
... More
Providing and fitting of Anchoring clamps comprising clamp body , plastic wedge, steel bill bracket , straps and buckles or nuts and bolts required for holding of 3 – Core , 35 Sq. mm H.T AB Cable.
6
460
2760
... More
P/L of ACSR conductor as per IS 398 (0.05)
1100
60
66000
... More
Providing and fitting of LT Distribution box for H.T transformer with 100 Amp MCCB For incomer and SFU for outgoing circuits.
1
30000
30000
... More
Providing and fitting of three phase, 4 wire commercial Porgy Meter with all allied Accessories.
1
28000
28000
... More
P/I of earthing station for electric substation, LT panel and stabilizer comprising of company fabricated earthing electrode as per IS: 3043. The job includes Auguring of bore of required Dia/depth for installation of electrode along with backfill compound mixed with soil and all other items required thereof for achieving the best result. The job includes connecting of electric gadgets through GI strip as per relevant standards.
Safe earthing electrode size : 80 mm Dia Length : 2000 mm
Back fill compound : 30 kg
6
11000
66000
... More
Main LT Control Panel:
Fabrication, providing and fitting of Main panel of appropriate size fabricated out of 14 SWG sheet having required openings / vents and Protection & fitted with accessories as under: -
A) Incoming Panel Distribution bus bar-(One) Rating – 300 amp Material of fabrication - Electric grade Cu with red, blue and yellow tapping of adequate section
a. Change Over Switch
• Type: On-load Front operated
• No. Of Poles: 04
• Rating: 200A • Makes: ABB/ L & T /Schneider/Legrand/Siemens/C&S / BCH • Qty: 01
b. Circuit Breaker Incomer • Type ----- MCCB • Qty ----- 1 Nos
• Make ----- ABB/ L & T /Schneider/Legrand/Siemens/C&S / BCH • No. of poles ----- 4
• Rated current-----200 Amp
• Operation ----- Extended Rotary Handle • Rated operational voltage----- 415 V ± 15%
• Rated frequency ----- 50 ± 3% Hz • Ultimate S.C Breaking cap at (415 volts A C, 50 Hz) ----- 50 KA Type of release ----- Microprocessor Motor Protection Release Adj Overload & Adj Short Circuit
B) Outgoing Panel(1st)
(I) Distribution bus bar
Rating – 200 amp Material of fabrication - Electric grade COPPER with red, blue and yellow tapping of adequate section
(ii) Circuit Breaker - MCCB (outgoing) Qty - 1 No Make - ABB/ L & T /Schneider/Legrand/Siemens/C&S / BCH No of poles -04 Rating – 100 Amp Type - Thermal Magnetic Release Rated operational voltage -415 V (± 15%) Breaking Capacity -50 KA at (415 AC, 50 Hz) C)Outgoing Panel (2nd)
(I) Distribution bus bar
Rating – 200 amp
1
180000
180000
... More
Material of fabrication - Electric grade COPPER with red, blue and yellow tapping of adequate section
(ii) Circuit Breaker - MCCB (outgoing) Qty - 1 No Make - ABB/ L & T /Schneider/Legrand/Siemens/C&S / BCH No of poles -04 Rating – 100 Amp Type - Thermal Magnetic Release Rated operational voltage -415 V (± 15%) Breaking Capacity -50 KA at (415 AC, 50 Hz)
D)Outgoing Panel (3rd) for electric hoist and illumination
(I) Distribution bus bar
Rating – 100 amp Material of fabrication - Electric grade COPPER with red, blue and yellow tapping of adequate section
(ii) Circuit Breaker - MCCB (outgoing) Qty - 1 No Make - ABB/ L & T /Schneider/Legrand/Siemens/C&S / BCH No of poles -04 Rating – 63 Amp Type - Thermal Magnetic Release Rated operational voltage -415 V (± 15%) Breaking Capacity -50 KA at (415 AC, 50 Hz) Metering Devices
i) Ampere Meter
Range - (0 to 200- 1 no,0 to 100-2no) Amperes Make - Rishabh
CT Coils per meter - 03 Nos (Rishabh)
Sel. Switches per meter - 01 No
Type- Analogous Qty -03 No’s
ii) Voltmeter
Qty-03 Nos
Range / Type- 0-500 Volts/ Analogous
Make - Rishabh
Selector Switches per meter-01No
I11) Multi-Function Meter
Qty - 01 No
Parameters - Line Voltage, Phase Voltage, Line Current, Phase Current, Frequency, Power Factor, Kilowatt Hour
Type - Digital
Make - Select
-
-
-
... More
F) Extra Protection
Earth Fault Relay - 3 Phase Over Current + Earth Fault Relay Make- L&T
The modular control panel with cabined enclose is of excellent fit and finish, corrosion resistant treated and powder coated with castor wheels & gliding hinges for smooth noiseless movement, lifting
-
-
-
... More
Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surface)excluding the cost of Purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2
30
974
29221.5
... More
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2
10
761
7619.5
... More
Providing / fitting of geared / hand railing type - Plain Travelling Trolley of modular construction, fabricated out of rolled steel plates, pivot mounted, runners mounted on roller bearings for easy movement of wheels, with wide range for beam width selection up to ISMB 500. The said equipment is to be used for horizontal movement of the 05 ton chain pulley block / Chain hoist.
2
14000
28000
... More
Providing, installation and testing of manual type triple spur gear chain pulley block pull lift type along with monorail geared travelling trolley having following features Gears:- The hoist shall have precision machine case Hardened alloy steel gear mounted on bearings and housed in a dust proof gear box. The lubrication of gears should be of high viscosity and temperature for longer life of gears. Load Chain:- The load chain be made of high tensile alloy steel having wear resistance and greatest mobility. The chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation. Load chain wheel:- the load chain well should be double ball bearing supported and Specially designed, perfectly machined wheel providing correct grip of load chain to makes the hoist most safe and reliable against any failure. The main specifications of C.P Block are given below
i. Make = Reputed make Capacity = 2 ton (P)
No. Of load chain falls = 2 or above
Min. Height of lift = 6 M
2
30000
60000
... More
Providing and fixing 15cm wide 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gram/m2
20
958
19160
... More
Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 grms.
4
150
600
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
Single Socketed pipes - 75 mm diameter.
18
250
4500
... More
Fabrication / providing / fitting of colour coated 8 inch 24 gauge GI prefabricated side morkhas for gabble area sides
20
300
6000
... More
Fabrication / providing / fitting of 26 gauge Color coated GI sheet chaja
18
1000
18000
... More
Cost on account of providing and fitting of 10 mm thick Bakelite sheet strips under AVR and transformer.
10
2000
20000
... More
Fabrication, installation of perforated ladder type pre-painted MS cable trays with perforations not more than 17.5% in convenient sections joined with connector, with ventilated flanged cover, suspended on MS suspenders included are accessories like vertical bends, horizontal bends, inside bends, outside bends, tees, cable clamps, cable cleats, bolts & nuts, painting of the suspenders etc. as required. As per IS 1255
Tray Thickness - 3mm, Cover Thickness – 3mm,
Dimensions- 100mm width x 100mm depth.
20
1000
20000
... More
Providing, installation, testing of power cable for working voltage up to and including 1100 volts; 95 mm Sqr Armoured Aluminum 3.5 core cable as power wiring from transformer and GD set to main panel change over switch. Cost includes laying of cable in trenches in 80mm dia slippery conduit where ever it is to be laid underground & in 65mm dia ASTM pipes over the wall of pumping house with wooden planks, GI hooks as per site requirement if not laid in cable trays, included is termination of ends with suitable Aluminum tube terminals dully crimpled & taped. IS Code - IS 7098(part-1)/ IS 1554(part-1).
60
900
54000
... More
Providing and laying of 16 mm² 3 core especially formulated PVC compounded insulated sheathed with abrasion resistant PVC compounded impervious to water, grease, oil etc. stranded copper submersible cable from starter to motor dully laid in 2 inch Dia pvc pipes as per IS- 694:1990.
180
800
144000
... More
Illumination of pump house involves providing & fitting of lighting points involves:
a) Wiring to lighting points with main wire as 1.5 mm sq. and for branches 1 mm sq. PVC single core multistranded copper conductor insulted, unsheathed 1.1 KV grade ISI marked with length as required.
b) Recessed pvc conduit/ channel 1.5” and 1” as required.
c) 6 Ampere flush type switches ISI marked.
d) Switch board frame fabricated out of wooden/ iron included flushing ways for above frames on walls as per site requirement.
e) Phenolic / phylum laminated sheet cover for fitting of switches over the above frame.
f) Ceiling roses, square blocks, angle holders, PVC corner/ending points accessories, washers, star screws, cement nails, rawl plugs as per site requirement.
15
1000
15000
... More
Providing and fitting of 10 watt LED lamps for holders of item no 1.
15
350
5250
... More
Providing and fitting indicator points ISI marked.
4
500
2000
... More
Providing and fitting Fan regulating points with 02 No 400 mm sweep wall fan ISI marked
2
2500
5000
... More
Providing and fitting of fan and 04 no 150 mm exhaust fans with controlling switches. ISI marked
4
1500
6000
... More
Providing and fitting 03 pin flash type socket 6 Ampere ISI marked
4
500
2000
... More
Providing and fitting of heating/stabilizer input and output points involves:
a) Wiring for 5 pin 16 Ampere power plug point with 2.5 mm sq. pvc single core multistranded copper conductor insulted, unsheathed 1.1 KV grade ISI marked with length as required length as required.
b) Recessed pvc conduit/ channel 1.5” and 1” length as required.
c) 16 Ampere 5 pin flush type switches ISI marked. And 16 Ampere flash type Socketed modules ISI marked.
d) Switch board frame fabricated out of wooden/ iron included flushing ways for above frames on walls as per site requirement.
e) Phenolic / phylum laminated sheet cover for fitting of switches over the above frame.
f) PVC corner/ending points accessories, washers, star screws, cement nails , rawl plugs as per site requirement
6
2000
12000
... More
Providing, fitting of Distribution Board 6-way S P N single door powder coated sheet steel enclosure for surface mounting fitted with bus bar, DIN channel, neutral link and incoming contact. The above DB is to be provided /fitted with double pole 63 Amp MCB for heating circuit & rests five of 16 amps each for lighting, fans/exhaust fans, premises luminary, and auxiliary circuit. Further job includes providing / fitting 4 mm² multi stranded single core 1100 volts, pvc insulated copper conductor through pvc conduit as service line from main panel as per site requirements.
1
7000
7000
... More
Providing/ fitting/ testing/ commissioning of power operated room heaters with fallowing specifications
3 power settings 1500 /2000/2500 watts
Oil filled radiator with 12 fins Fan / Warm / Hot wind for selection
Easy serviceability
No Oxygen Burning.
Tilt over switch for extra safety
Rear safety front cover Frequency (hertz): AC 50 Hz
Adjustable thermostatic heat control. Touch sensor.
Quick heating with PTC fan
Material-Metal and Plastic
Heating Method- Convection
Over Heat Protection = Available.
Mobility – Castor wheels with mounting plate for easy mobility, back cover and humidifier
The unit is to be provided with warranty card for on door service during warranty period of defect liability.
Further Job includes providing / fitting of separate circuit involving 2.0 mm square multistranded copper conductor from main Heating plugs by 16 amp switch , socket modules , 03 pin top , wooden blocks and all allied items as per site requirement.
1
25000
25000
... More
Providing fitting of Solar Rechargeable Portable Lantern for Emergency and Portable Lighting purpose with specifications here as under
Ultra-portable, super-bright LED light, TOUGH & STURDY: Highly durable, long life to be operated under all weather conditions
Wattage: 4 to 8 watts
Back up Duration: Upto 4 hours Charging method provision: Charging via Solar Panel/Also can be charged with Mobile charge adapter Re Portable hand held lamp with step dimming and embedded / isolated solar recharge panel
2
4000
8000
... More
Supply, installation, Testing & commissioning of 1000VA Full Sine wave power inverter (Make: Microteck/Luminous) including Providing / Installation of 12V, 180AH Tubular inverter Battery with trolley and cover. (Make: Amaron /Exide) with 2-core 6 Sq mm Cu wiring as per site requirement along with other accessories like SS-Combine (02 No’s), 3-pin plugs etc of reputed make for proper fitment and installation of the item.
1
35000
35000
... More
Providing, laying & fixing with adhesive/bonding material of insulation rubber mats on the floor of the pump house, covering area around electro- mechanical machinery for safeguarding the life & limb of the workmen due to possible leakage of current & short circuit. The floor surface shall be made good & shall be free from dust, grease, foreign material & moisture free. Shall have the following specifications: Composition: Rubber (synthetic mats for electrical purpose) Thickness: - 2.5mm Size: - 1M wide.
12
1400
16800
... More
Providing of set of 06 no 9.5-liter capacity GI buckets painted in post office red colour with prior coat of red oxide primer & written with white paint “FIRE” & mounted on angle iron frame with brackets of appropriate size & capacity including cost of providing / filling of sand etc. Included is providing First Aid box as approved by Indian red cross conforming to IS 2217 & amended till date
1
8000
8000
... More
Supply, installation of 6 kg CO2 type fire extinguisher manufactured as per IS: 15683 of 2006 with IS mark and comply with DGMS (Approval). The CO2 extinguisher should be suitable for class B & C fire and also for fire involving electrical equipment’s. The cylinder used for fire extinguisher shall be approved by Petroleum and explosive safety organization (PESO) as per gas cylinder rules 2004 and as per IS: 7285 of 2004. The body should be made of seamless steel (manganese) confirming to IS: 7285 with IS mark and should be provided with squeeze grip nozzle and should be filled with CO2 confirming to IS: 15222 of 2002 with certificate. The extinguisher shall be provided with manufactures test certificate and hydraulic test certificate by BIS from PESO.
6
6700
40200
... More
Illumination of Premises:
Providing and erection of 9 Mtr long Hot Dip Galvanized octagonal pole (single Section) with bottom 150mm, top 75mm wide, thickness 3mm with 70 Microns Zinc coating having inside arrangement for providing of power connection along with following items.
1) 4 Way terminal Connector 20 Amp.
2) 4 No MCB 8 Amp. The job includes fabrication, providing and fitting of four arm GI structure at the top having 120˚ angle between arms and each arm having 15˚ inclination with respect to horizontal plane. Each arm should be of 2’ length and size and shape appropriate as per requirement of the luminary.
The job also includes providing and fitting of required length of flexible multi strand 2 mm copper wire from each terminal connector to each holding arm.
The pole is to be mounted on 1:2:4 Cement concreting of size not less than 2’x2’x6” (cost of concreting not included in the job) using 04 No anchor bolts of required size not less than 7” in length. The complete job includes earthing in GI Electrode as per relevant IS Code
1
32000
32000
... More
Providing, installation, testing and commissioning of area lighting 120 Watt LED (Street Light Type) on top of octagonal pole vide item No.36
Having following specs:
Input: 90-240 V 50 Hz
Power Factor: 0.9
Colour Temperature: 4K - 6.5K
Beam Angle: 120˚ - 170˚
Lumens: 12000
Operating Temperature: -20˚C to 60˚C
The LED is pressure die cast aluminium housing with power coated finish and having Ingress Protection up to IP-68.
The LED is to be properly fitted on the arm of the pole and connected to the copper wire as directed."
4
9000
36000
... More
Providing Laying and connection of 2Cx10 mm² XLPE Aluminum Armoured Cable from the connector of high mast pole to the stabilizer. The job includes underground laying or overhanging as per requirement and directions of the site in-charge
90
130
11700
... More
Providing Laying and connection of 2Cx06 mm² XLPE Aluminum armoured Cable from bottom to the LED lights. The job includes underground laying or overhanging as per requirement and directions of the site in-charge.
1
3000
3000
... More
Providing, Installation and testing of 2KVA fully automatic voltage stabilizer with input voltage 70-240 V and output 220 V. The stabilizer shall be installed and connected to the electric circuit as per location provided by site in charge
1
11000
11000
... More
TOOL KIT For Maintenance:-
The Tool Kit for maintenance shall comprise of the following and all the items as mentioned below shall be of :
i. Double ended Spanner (Chrome plated) of size in mm
6/7,8/9,10/11,12/13,14/15,16/17,18/19,20/22,21/23,24/26,25/28, 24/27, 30/32 each – 02 no. ii. double ended Ring spanners chrome plated of size in mm 6/7,8/9,10/11,12/13,14/15,16/17,18/19,20/22,21/23,24/26,25/28, 24/27, 30/32 each – 02 no. iii. Allen key set black finish of size in mm 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 each – 2 NO.
iv. Combination Pliers insulated with thick C.A sleeve; size in mm 165, 210, 255 each – 02 No.
v. Long nose plier insulated with thick C.A sleeve; size in mm 165, 205 each – 02 No.
vi. Side cutting plier insulated with thick C.A sleeve; size in mm 165, 205 make – 02 No.
vii. Insulated screw Driver with Blade length in mm 50,75,100,125,150,200,250, Blade dia. in mm 1.6 x 0.4 , 1.6 x 0.4, 3.0 x 0.4, 3.5 x 0.5, 3.5 x 0.5 , 4 .0 x 0.6 , 6.0 x 0.8 two numbers each. viii. Hammer with handle weight – 110 gm., 340 gm., and 600 gm. –each 1No. ix. Heavy duty pipe Wrench length in mm - 200, 300, 600 each – 01 No
x. Electric MultiMate=1No
xi. Digital multimeter – 1No
xii. Digital Clamp tester capable to measure up to 400A - 1 No.
xiii. Hack saw frame with hack saw blade – 01 no.
Xiv. S-16 MXL, S- 16 H X L Socket Set (19 sockets + 6 Accessories) – 01 No
1
40000
40000
... More
Providing of good quality bedding for night stay/Shift consisting of: -
i) Mattress with warm cover size 6'x3' (6Kg)- 02 No’s
ii) Quilt with warm cover size 5'x8' (6Kg)- 02 No’s
iii) Pillows with covers - 02 No’s
iv) Single bed warm blankets with one sided Fur- 02 No’s
The filling material for mattress, quilt and pillow shall be of good quality cotton
b) The job also includes providing of pressure cooker 5ltr 02 No’s, Steel patila (utensil) 5ltrs 02 No’s, cooking heater infra red type 01 No., room heater 01 No., steel buckets 10 litre capacity 01 No., Plastic bucket 10 litre capacity with Mug 02 No’s each, steel glasses 06 No’s, steel Plates with large spoons and bowls 03 No’s each, Cup and Saucer set (01 No. Set) and, 5kg Gas cylinder with burner/ stove. All the utensils shall be of Prestige, Pigeon, Wonder chef, United, Futura make.
The job also includes providing of thermo-cool 15’x12’ along with excel matting of 15’x12’ size. The job also includes providing of unbreakable Plastic Chair table set consisting of chairs 04 No’s, extra heavy Table 01 No. of Samruddhi/ Neel kamal/Supreme /Anmol Make. The job also includes providing of good quality safety Door locks (03 No)
1
40000
40000
... More
Providing of bamboo ladders 18 feet long along with 15 feet long Link rods and HT Glove pair (01 No each)
1
8000
8000
... More
Providing and fitting of 01 No. angle iron/sheet metal board duly painted showing various specifications of the mechanical and electrical equipment’s installed at site. Size: 4’×6’ out MS Angle of 40X 40 X 5 of 36rft and MS sheet of 1 mm thick total weight of 50.16 Kgs
2.3
2800
6440
... More
Designing, manufacturing, Providing /fitting of scrolling & moving LED type digital scheme parameter / status board, power operated with scrolling parameters as “Water Supply Scheme & current status of the scheme with general parameters here as under
Multiline
Multicolour
Day light visibility
Editing facility at user’s discretion
Required weather proof construction to suit outdoor condition
Key board / computer interface
On site programming
Power coated Cabinet of mild steel body suitable for angle iron mounting.
Operating climatic condition - -10 to 50 Ċ.
Power – single phase 230 volts. Size – (2 feet x 6 feet)
Mounting- wall
1
50000
50000
... More
Providing and fitting of 19 mm thick multi-layered ply sheet of size 6 x 3 feet , 2 no’s including cutting , fixing all complete including painting of the play sheet by one coat of primer and two coats of enamel paint
1
4500
4500
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work up to plinth level with 1: 2 : 4 mix ( 1 cement , 2 coarse sand , 4 graded stone aggregate 20 mm nominal size)
10
6650
66500
... More
Providing and laying of soling stone
10
800
8000
... More
Centering and shattering including strutting, propping etc. and removal of from work for foundation, footings, base for columns
10
286
2863.5
... More
Providing, installation, Testing & commissioning of 415 ±10%V (output), 3 phase 57 KVA water cooled Diesel Generator set as per IS 8528 (2018) and ISO 3046 (2002) for engine and IEC/IS 60034-1 for alternator / new amendments as per CPCB 1V norms in DG Sets from 2023 suitably assembled and fitted in a pollution free acoustic enclosure / canopy of required size as per Ministry of Environment protection rule 1986 read with latest amendments. The DG Set is required to be fitted and tested on load at site The D.G Set shall have the following technical specification. Besides the above works the D.G set shall be provided with 12 V desired capacity Lead acid battery of reputed make fitted inside the D.G set Canopy along with necessary accessories. The job also includes the cost on account of HSD and skilled operator required for operation of D.G set for a period of 05 hours continuously during its testing and commissioning of D.G set at site. The capacity of the D.G set is given below ALTERNATOR The alternator shall be self-excited. Self-regulated for desired rating. The alternator shall be fitted with high performance AVR and suitable for continuous and trouble free operation.
SPECIFICATIONS
1) Rated Output at above Site Conditions: - 57 KVA 2) Rated Speed: - 1500 rpm 3) Efficiency:-88.8% 4) Voltage: - 415 V at 50 Hz DIESEL ENGINE (Prime Mover) The engine shall be diesel driven to develop requisite BHP at 1500 rpm for the alternator rated as above at an altitude of 1600m AMSL with ambient temperature ranging from -15 ˚C to + 40 ˚C under 60% humid conditions. Specifications: - 1) Speed: - 1500rpm 2) No. of cylinders: - As per new amendments
3) Aspiration: - TC 4) Cooling system:-water cooling 5) Method of start: - 12 volt electric start / as per new amendments
The engine shall be fitted with following accessories. 5) Method of start: - 12 volt electric start / as per new amendments
The engine shall be fitted with following accessories.
1) Fuel tank:-suitable capability for twelve hours continuous running on full load. The fuel tank shall be floor mounted type made of M.S sheet duly painted and fitted with inlet/outlet return connections, air vent, drain valve, level indicator and fuel pipes
2) Battery:- 12 volt battery charging system along with leads and terminals C/W charging dynamo and cut out fitted with suitable rating starting system.
3) Safety control: - In order to shut down the engine in the event of high water temperature emergency control switch shall be provided. It shall also be fitted with ant vibration pads, cold starting aid, safety control for low lube pressure etc.
4). ) Radiator:- Suitable Size C/W hoses, clamps etc.
C) Control panel: - It shall be fabricated out of steel sheet of desired thickness, pre-treated and Aesthetically finished. It shall be totally enclosed, dust, vermin proof with IP-53 degree of protection. The panel shall be of AMF type with meters MCCB/MCB, Push buttons, Pilot Lamps, starting switch with keys, Lube oil gauge, Temperature and pressure gauge, Speedo meter and hour meter etc. All the above components shall be properly mounted duly wired and shall be of reputed make.
D) Miscellaneous:-Technical literature and catalogue is to be provided. E) Earthing: The job shall include complete earthing of the DG set as per OEM standards.
1
850000
850000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements