Pradhan Mantri Gram Sadak Yojana Tender

Providing and laying PCC grade M-15 in plain cement concrete in sub structure complete as per drawing and technical specification clause 802,804,805,806, 807,1202 and 1204 ( For Heights upto 5Mtr.) Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing and laying plain cement concrete M-20 in Sub structure as per drawings and technical specifications clause 800, 802,404, 805, 806, 807, 1202, 1204, 1205.50. Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing and laying plain cement concrete M-25 in Super structure as per drawings and technical specifications clause 802,404, 805, 806, 807, 1202& 1204 . Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Polygonal / Random Rubble masonry, nallah stone, laid dry in foundation and plinth including cost of bond stones of M-15 size ( 450mm X 150mm X 150mm)@7Nos / Cum . Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Polygonal / Random Rubble masonary, uncoursed / brought to course in 1 cement; 6 fine sand mortar, with nallah stone in Sub - Structure and plinth including leveling up at specified levels with M-5 nominal mix ( mix size of stone Agg. 20mm nominal) concrete including cost of through / band stones of M-15 size ( 450mm X 150mm X 150mm)@7Nos / Cum . Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Filling availabke excavated earth in trenches as per drawings and Technical specifications Clause 305.3.9

Back filling behind abutment wing wall, Return wall and R/wall complete as per drawing and technical specificatin clause 1204.38 granular material . Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing and laying reinforced cement concrete NP3 pipes conforming to IS 458:2003 for culverts materials in single row includong fixing collar with cement mortar 1:2 ( 1 cement : 2 sand ) excluding excavation , protection works , back filling cement concrete and masonary work in head walls parapets clause 1106 but including all carriages of materials by M.T. , handing , re-handling and including cost of pipe complete 1000 mm Dia

Suppling , fitting and placing of HYSD bar reinforcement for RCC work in Super Structure including bending , binding complete as per drawings & Technical specifications Clauses 1002,1005,1010 and 1202 including cost of binding wire , all lead , lifts , handling & re handling and carrriage by MT complete

Providing and laying of Gabion of mechanically woven, double twisted hexagonal wire Mesh Gabion type:- Zinc coated Mesh type: 100mm x 120mm, Mesh wire Dia 2.70 mm, Salvage Wire Dia: 3.40mm, Lacing wire dia: 2.20 mm (As per National/Internationl Standards and also Conforming to IS 16014:2012 of G.I Wire, Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Preperation of Sub Grade by way of Loosening of the orignal ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specificaiton Clause 303.5.2. including Clearance of longitudinal Drain, catch pit, Cross drainage works, Surface Corrections by way of filing of ruts, clearance of lanslides wherever exists removal of vegetation of all sorts including all leads and lifts and safe disposal of the same without damaging Public/ Private properties (Complete Job)

Construction of Granular Sub-Base by providing well graded material, spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. For grading I material by Mix in Place Method. Including all carriages by Mechanical Transport, leads and lifts etc. complete.(GSB-I, 300 mm thick)

Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer(Pug Mill), carriege of mix material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100KN weight to achieve the desired density including lighting, barricading and mantinance of diversion, etc as per table 400.11 & 400.12 and technical specification clouse 406. ( WMM , 75 mm thick)

Providing and appling primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specificatin Clause 502 (Low Porosity) Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing & laying bituminous macadam wearing coat with hot mix plant using crushed aggregates of Grading as per Table 500.4 premixed with bituminous binder, transporter to site upto a lead of 1000 mtr laid over a previously prepared surface with pavers finisher to the required Grade, Level and Alignment and rolled to achieve the desired compaction as per Technical Specifications Clause 504.

Providing and appling Tack coat with bitumen emulsion ( RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per Sqm on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per Technical Specification Clause 503. Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finshed to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specificatin Clause 508 by mechanical means using Bitumen (VG - 10). Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type ABC as per Technical Specification Clause510 Bitumen . Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Berm Filling with approved material obtained from borrow pits with all lifts and leads. Transporting to site, spreading Grading to required slope and compacting as per Technical Specification 303.1. Including all carriages by Mechanical Transport, leads and lifts etc. complete.

Providing and fixing of Typical PMGSY Citizen Informatory Sign Boards With “Logo” as per MORD specifications and drawing. Three M.S plates of 1.6 mm thick, top and middle plates duly welded with M.S flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 02 Nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG Steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and color. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and Annexure 1700.1.

Providing and fixing of typical PMGSY informatory sign board with logo as per MORD specifications and drawing. Two / Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S will be stove enameled on both sides. Lettering and printing arrow, border etc, will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing and fixing of retro-reflectorised cautionery, mandatory and informatory sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminum sheeting 1.5mm thick supported on mild steel angle iron post 75x75x6mm firmly to the ground by means of property designed foundation with M-15 grade cement concrete 450mm x 450mm x 600mm below grond level as per drawing and Technical specification clause 801. (60cm equilateral triangle).

Reinforced cement concrete M-15 grade kilometer stone/Local Stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703. Including all carriages by Mechanical Transport, leads and lifts etc. complete. Ordinary km stone (Precast)

Reinforced cement concrete M-15 grade kilometer stone/Local Stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703. Including all carriages by Mechanical Transport, leads and lifts etc. complete. 200 mtr stone (Precast)