Pradhan Mantri Gram Sadak Yojana Tender

Bituminous Macadam :- Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 16.63.1A 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.including cost and carriage of all materials from approved source to site of work,with all leads, lifts, loading unloading and octori.(Finished work to be measured, complete)

Tack Coat: Providing Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications on bitumen surface @ 0.50 Kg/sqm.Including cost and carriage of all materials from approved plant to site with all leads and lifts and octori etc complete job (Finished work to be measured).

Providing, laying 25 mm thick Semi-Dense Bituminous Concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronice sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge, 25mm compacted thickness with bitumen of grade VG-10 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in Drum Type Hot Mix plant of 60-90 TPH capacity).Including cost and carriage of all materials from approved plant to site with all leads and lifts and octori etc complete job (Finished work to be measured).

Seal Coat: Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.Including cost and carriage of all materials from approved plant to site with all leads and lifts and octori etc complete job (Finished work to be measured).

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi- automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.Including cost and carriage of all materials from approved plant to site with all leads and lifts and octori etc complete job (Finished work to be measured).

Engagement of JCB for the clearance BWO removal of slips/Soil moorum including disposal of same as direced by the Engineer incharge.

Engagement of Labours for clearance of existing drains and culverts.and disposal of the same as per the directions of site incharge