Pradhan Mantri Gram Sadak Yojana Tender

Providing and laying of plain Cement concrete of Grade M-20 in Sub-Structure complete as per drawings & Technical specification Clauses 802, 804, 805,806, 807, 1202 & 1204. Including cost of curing, form work , all leads, lifts and carriages of materials by MT complete. For height upto 5.00 mtr

Polygonal/Random Rubble Masonry laid dry un coursed brought to course in sub structure including cost of bond/through stones, all leads, lifts, carriages,of materials by MT handling and re-handling complete.

Polygonal/Random Rubble Masonry un coursed brought to course in cement mortar 1:6 (I cement :6 fine sand) in sub- structure including leveling up as specified level with M-5 nominal mix with size of stone aggregate 20mm nominal including cost of through/bond stones , including all leads, lifts, carriages, handling, and re-handling complete .

Back filling behind abutment , wing wall and return wall as per drawings and technical specification clause 1204.3.8 also including all leads, lifts, carriages, handling and re-handling complete

Providing /Laying of boulder apron laid in wire crates with 4mm dia GI wire confirming to IS:280 &IS:4826 IN 100mm mesh(woven diagonally) including 10% exta for laps and joints laid with stone boulders weighing not less than 25Kg each as per drawing and technical specification clause 1301 including all leads,lifts and carriage of materials etc. complete.

Providing and laying reinforced cement concrete NP3 pipes 1000mm dia for culverts on 1st class bedding of granular material bedding in single row including fixing collar with cement motar 1:2 (1 cement : 2 sand) excluding excavation, protection works, back filling cement concrete and masonry work in head walls parapets clause 1106 but including all leads, lifts, carriages of material by MT complete

Construction of gravel base by well graded materila spreading in uniform layers with motor grader on prepeared surface mixing by mix in place method with rorovator at OMC and compacting with smooth wheel roller to achieve the desired denisity complete as per technical caluse 402 for grading material two

Providing, laying, spreding and compacting stone aggregates of specfic sizes to water bound macadam spectifaction including spredding in uniform thickness, hand packing, rolling with smooth wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable stones screening/binding material to fill-up the interstices of coarse aggregate, watering and compacting to the require density Grading-III by mechanical means as per technical spectification clause 405.

Providing , laying ,spearding & compacting stone aggregate of specificsize to Wet Mix Macadam specification including spearding in uniform thickness hand picking rooling with smooth wheel roller 80-100 KN in stages to proper grade and camber , appling and brooming , staone screening / binding material to fill up the interstices of course agreegate watering and compacting to thr required denisity grading 3 as per Techinical specification clause 405

Providing and applying Primer Coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 Kg/Sqm using mechanical means as per technical specification clause 502 including all leads, lifts, carriages of materials by MT , loading and unloading complete. (Low Porosity)

Providing and applying Tack Coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 Kg per Sqm on the prepared granular surfaces treated with primer and cleaned with Hydraulic broom as per technical specification clause 503 including all leads, lifts, carriages of materials by MT, loading and unloading complete.

Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 mm to 5.6 mm aggregrates using S-90 (VG10) to required line.grade and level to serve as wearing course on previously prepared base, including mixing in a suitable hot mix plant, transportation to site of work, laying and rolling with a three wheel 80-100KN static roller capacity , finished to required level and grades to be followed by Seal Coat of Type-B as per technical specification clause 508. including all leads, lifts and carriages of materials, handling and re-handling of materials complete

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per technical specification clause 510 including all leads, lifts, carriages of materials by MT, loading and unloading complete. By Mechanical Means : Bitumen (S-90)

Construction of Sub grade and earthen shouldres/Berm filling with approved material obtained from borrlw pits with all leads and lift transporting to site , speaedig ,grading to required slopeand compacted to meet requirment of table 300.2 with all leads and lift as per technical specification clause 303.1

Providing and fixing of Typical PMGSY Citizen Informatory Sign Boards With “Logo”, "Maintenance Board" as per MORD specifications and drawing. Three M.S plates of 1.6 mm thick, top and middle plates duly welded with M.S flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 02 Nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG Steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and color. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and Annexure 1700.1.

Providing and Fixing of PMGSY Logo boards as per MORD Guidelines and drawings.

Providing and fixing of retro reflectorised cautionary mandatory and informatory sign as per IORC 67made of encapsulated lens type reflected sheeting vide clause 1701.2,3 fixed on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450mmx450mmx600mmx600mmbelow ground level as per drawings and technical specification 801 60cm equatorial triangle - Speed limit/Right /left hand curve /school/Falling rocks

Providing and fixing of reinforced cement concrete M-15 Grade Kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703. ( ordinary km stone)

Providing and fixing of reinforced cement concrete M-15 Grade Kilometer stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703. (200 mtr stone)