Pradhan Mantri Gram Sadak Yojana Tender

Bituminous Macadam Surface correction: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500.4 premixed with bitumen binder @ 3.20 % to 3.50 %,of density, Viscosity VG grade 10 transported to site laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.(Including all leads lifts). (Qty vide item No. 01 (a)

Tack Coat: Providing and applying Tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20-0.25 kg/ sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.(Including all leads lifts).

25mm thick Semidence Bituminous Concrete: Providing, laying and rolling of semi dence bituminous concrete surfacing of 25mm compacted thickness composed of aggregate of specified grade with bituminous binder @ 4.5% to 5% of mix & filler by weight , mixing in suitable plant transporting the hot mix to work site, laid with paver finisher to required line, grade and level to serve as wearing course on a previously prepared base, including rolling with a three wheel 80-100 kN static/ Vibratory roller capacity, finished to required level and grades as per Technical Specification Clause 508.By Mechanical Means Bitumen Viscosity VG grade 10 (Including all leads lifts).

Seal Coat: Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510.specification 1995) By Mechanical Means Type B Bitumen Viscosity VG grade 10 (Including all leads lifts).

Surface dressing of the ground/shoulder including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

300mm Dia Pipes

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Providing and laying reinforced cement concrete pipe NP3 for culverts in first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works backfilling,concrete and masonry works in head walls and parapets as per clause 1106. (300mm dia)

Retro relectorised Trafic signs : Providing and fixing of retro reflected cautionay, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixied over aluminium sheeting 1.50mm thick supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450mm x 450mm x 600 mm, 600mm below gournd level as per drawings and technical specification clause 801 (Curve, School, Left turn, Right turn, speed limit, busbays, merge traffic, diverge trafficc, give way , stop etc)

PMGSY LOGO BOARD:-Providing and fixing of PMGSY Board with typical LOGO as per MORD specification and drawing.

Citizen Information Board:-Providing and fixing of typical PMGSY informatory sign Board with logo as per MORD specification and drawing. Three MS plates 1.6 mm thick top and middle plate duly welded with MS Flat Iron 25mmx5mm on back edges. The lower plate will be welded with MS angle iron frame of 25x25x5mm. The angle iron frame of the lower most plate and flat iron frame of the middle plate will be welded to 2 No. 75x75mm of 12 SWG Sheet tubes posts duly embeded in cement concrete M-15 Grade blocks of 450x450x600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47x47mm of 12SWG Steel plate tubes. All MS well be stove enameled on the both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tubes will be painted with primer & two coats of epoxy paint as per drawing Clause 1701

Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semi- automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge (100mm wide strip)