Pradhan Mantri Gram Sadak Yojana Tender

Providing and laying of plain cement concrete in open foundation complete as per drawings and technical specification clause 802,803,1202,1203 including form work with cement concrete M-10 grade with 40mm size stone aggregate including all leads lift and carriages of Materials by MT complete.

Providing and laying of cement concrete M-15 grade mix with 20mm – 10mm size crushed stones aggregate as per drawings and technical specification clause 802,803,805,806,807,808, 811, 815, 817, 1202, 1204 including curing and form work with steel shuttering including all leads and lifts and carriages of materials by mechanical transport complete.

Providing and laying of cement concrete M-20 grade mix with 20mm – 10mm size crushed stones aggregate as per drawings and technical specification clause 802,803,805,806,807,808, 811, 815, 817, 1202, 1204 including curing and form work with steel shuttering including all leads and lifts and carriages of materials by mechanical transport complete.

Polygonal random rubble masonry uncoursed brought to coursed laid dry masonry with quarry stone including cost of bond stone using stone available form excavation of hard rock by blasting including all leads and lifts carriage of materials handling and rehandling complete clause 704,6 and 1604

Polygonal Random Rubble Masonry un coursed brought to course in 1:6 fine sand mortar with quarry stone in substructure including with M-5 grade mix with crushed stone aggregate 20mm nominal size including cost of through bond stone with all leads ,lifts and carriages of materials complete as per clause 1604.

Backfilling behind R/wall abuntment wing wall return wall with available stone from earth work complete as per drawing and technical specification clause 1204.3.8 labour rate

Filling in foundation trenches as per drawing and technical specification clause 305.3.9 earth filling. HPC

Providing & laying of RCC NP3 pipes confirming to I.S 458,2003 for culvert on first class bedding of granular material in single row including fine callers with cement concrete mortar 1:2(1 cement 2 fine sand excluding excretion protection work back filling cement concrete and masonry work backing head walls and parapets clause 1103,1104, 1105,1107 &1108 & including all leads and lifts carriage handling and re handling cost of RCC pipe complete 1000mm dia.

Providing & laying of boulder apron laid in wire crate with available stone from earth work excavation 4mmdiaG.I.wire confirming to I.S. 280 & 4826 in 100mm X 100mm mesh woven diagonally including 10%for laps and joints laid with stone boulder weighting not less than 25 kg each as per drawing &technical specification clause 1301 including all leads and lift handling & re handling & carriage & including cost of wire crate complete.

Construction of granular sub base providing well graded material in uniform layers with motor graded on prepared surface mixing by mix in place method with rotavator OMC and compacting with three wheel 80-100 static roller capacity to achieve the desired density complete as per Technical Specification clause 402 including all carriages of material by mechanical transport, leads, lifts etc. complete

WBM-III Providing laying spreading and compacting stone aggregate to specific size to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100 KN stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of course aggregate watering and compaction to required density as per technical specification clause 405 including all leads, lifts and carriages by mechanical transport complete.

Providing and applying primer coat with bitumen emulsion S.S.I on prepared surface granular base including cleaning of road surface and spraying primer at rate 0.70-1.00 Kg per sqm using mechanical means as per technical specification clause 502 including all leads lift and carriages of Materials by MTcomplete.

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25-0.30 Kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic boom as per technical specification clause 5.03 including all leads lift and carriages of Materials by MTcomplete.

Providing and laying bituminous macadam 50mm thick with hot mix plant using crushed aggregates of grading as per Table 500.4 premix with bituminous binder, transported to site laid over a previously prepared surface with paver finisher to the required grade level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504 including all leads lift and carriages of Materials by MTcomplete.

Providing, laying and rolling of open graded premix carpet of 25mm thickness composed of 13.2mm to 5.6mm aggregates by using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades as per Technical Specification clause 508, by mechanical means Bitumen (S-90) including all leads, lifts and carriages by mechanical transport complete

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels grade and cross fall using Type B as per technical specification clause 510 (i) Bitumen S-90 including all leads lift and carriages of Materials by MTcomplete.

Construction of earthen shoulder with approved material obtained from borrow pits with all lifts and leads transporting to site spreading grading to required slope and compacted to meet requirement of table 300.2 with leads up to 1000m as per technical specification 303.1

RCC M-15 grade kilometer stone/ local stone of standard design as per IRC-25, fixed in position including finishing & lettering but excluding painting as per drawing & technical specification clause 1704. Including all leads, lifts and carriages by mechnaical transport complete.

ordinary km stone

200M STONE PRECAST

RCC M15 Grade Boundary Pillar/local stone of standard design as per IRC-25 fixed in position incl. finishing and lettering but excl. painting as per drawing and technical specification clause 1704

Repairing and Rewriting PMGSY board with logo as per specification & drawing .three M.S plates of 1.6mm thick top & middle plate duly welded with ms flatiron 25 x 5 mm size on back on edges . the angle iron frame of the lower most plate & flat iron frame of middle plate will be welded to 2 Nos. 75 x 75 mm of 12SWG sheet tubes post duly embedded in cement concrete M-15 grade blocks of 450 x 450 x 600mm , 600mm below ground level . the top most diamond plate will be welded to middle plate by 47 x 47mm of 12 SWG sheet plate tube. All M.S will be stove enameled on both sides . lettering & painting, arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quantity in required shade & colour. All sections o framed posts & steel tubes will be painted with primer & two coats of epoxy paints as per drawings clause 17010 & annexure 1700.1

Painting two coats including primer coat after filling the surface with enamel paint in all shades on new plastered surface as per drawing and technical specification clause 1704

Providing and fixing of retro- reflectorised caoutionary, mandatory and informatory sign as per IRC - 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 m thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of propwerly design foundation with M-15grade cement concrete (450 X 450 X600 )mm 600 mm below ground level as per drawing & technical specification clause 801.

Providing and erecting "W" type metal type crash barrier comprising of 3mm thick corrugated Sheet metal beam rail,70cm above road /ground level ,fixed on ISMC series Channel 1 vertical post, 150x75x5 mm spaced 2m centre to centre ,1.8m high,1.1m belowground/road level with M-20 Concrete Mix, all steel parts and fitments to be galvanised by hot dip process , all fittings to confirm to IS:1367 and IS:1364 , metal beam rail to be fixed on vertical post with a spacer of channel section 150x75x5mm,330mm long complete as per clause 811.3 complete job with all carriage and cost.