Power Development Department Tender

Operation and Maintanence incuding watch and ward for 4th year after commissioning of the Job @ 5 % of the Bid cost

Supplying, Installation, testing & commissioning of Outdoor type, compartmentalized, double door Feeder Pillars fabricated out of suitable size angle iron & flats & covered with 2mm thick cold rolled CRCA sheet, weather proof powder coated painting etc., complete with Al. Bus Bar, connection with solid/stranded copper conductor wire/copper strips, gl&s neutral links, name plate & pad locking facility etc. including the following switchgears etc., complete as required. Feeder Pillar Type A INCOMING :63A, 4P, 25KA MCCB with T/M release, BUSBARS: 100A, 433V, 50Hz. 25KA, 4 Strips, Aluminium with heat shrinkable sleeves. OUTGOINGS: 10 to 32A, SPN MCB-10KA with T/M protection - 3Sets, 10 to 32A, TPN MCB-10KA with T/M protection - 1 Set and 1 Phase 2Wire energy meters(10A - 60A), 433V energy meters, at additional VCB Sectionalise to be provided every 2 KM length

LV CABLES _Main: Supply & laying of 2C , 25mmSq LV (1.1KV) Grade XLPE insulated PVC sheathed, Havels/Polycabbrand,Aluminium conductor, armoured LV Power cable 750mm. below ground level covered with s&& P.C.C covers of 300 mm (Width) X 300 mm (Length) X 60 mm (Thickness), for covering under ground cable suitablly as per requirement for mechanical protection to the cable,including necessary connection,excavation& refilling of trenches for the following sizes as per specification.