Power Development Department Tender

Supplying, Installation, testing & commissioning of Outdoor type, compartmentalized, double door Feeder Pillars fabricated out of suitable size angle iron & flats & covered with 2mm thick cold rolled CRCA sheet, weather proof powder coated painting etc., complete with Al. Bus Bar, connection with solid/stranded copper conductor wire/copper strips, gl&s neutral links, name plate & pad locking facility etc. including the following switchgears etc., complete as required. Feeder Pillar Type A INCOMING :63A, 4P, 25KA MCCB with T/M release, BUSBARS: 100A, 433V, 50Hz. 25KA, 4 Strips, Aluminium with heat shrinkable sleeves. OUTGOINGS: 10 to 32A, SPN MCB-10KA with T/M protection - 3Sets, 10 to 32A, TPN MCB-10KA with T/M protection - 1 Set and 1 Phase 2Wire energy meters(10A - 60A), 433V energy meters, at additional VCB Sectionalise to be provided every 2 KM length

Sub Station:- Supply carriage installation testing and commissioning of ,three Phase, Dry Type/Air Cooled, amorphous core, copper wound, 25KVA, 11KV/440V, distribution transformer, including a) Supply carriage installation of 2 no. Octagonal Galvanized Iron Poles 8m long with anchor plate/Bolts including concrete base as per design/IS Specifications and 2 no. GI Pipe sections, 4 inch dia, 8 ft long with base plates, 6mm thick, 305x305mm for 4 pole structure as per RE Standard and 12 no. 8 ft long , 75x40x40x6mm Prefabricated GI Channels for sub station structure. b) Supply and installation of 11KV VCB Complete panel outdoor type including concrete base as per IS specifications , its gantry in channel iron structure as per design c) Providing of J2 Type, 3no. Chemical earthing for the sub station. d) LT Distribution box, with bus bars (suitable for 100A), MCCB 100A, 3 No. 10-60A,10no. 1 ph, energy meters, 3 ph Voltmeter, 3 ph Ammeter. GI Octagonal Pole specifications are :- Section 8000mm,top/bottom dia 70/135mm,thickness 3mm,base plate 220x220x16mm thick, foundation bolt length 750mm,no. Of bolts 4x20

LV CABLES _Main: Supply & laying of 2C , 25mmSq LV (1.1KV) Grade XLPE insulated PVC sheathed, Havels/Polycabbrand,Aluminium conductor, armoured LV Power cable 750mm. below ground level covered with s&& P.C.C covers of 300 mm (Width) X 300 mm (Length) X 60 mm (Thickness), for covering under ground cable suitablly as per requirement for mechanical protection to the cable,including necessary connection,excavation& refilling of trenches for the following sizes as per specification.

LV CABLES _Main: Supply & laying of 2C 16mm Sq LV (1.1KV) Grade XLPE insulated PVC sheathed, Havels/Polycabbrand,Aluminium conductor, armoured LV Power cable 750mm. below ground level covered with s&& P.C.C covers of 300 mm (Width) X 300 mm (Length) X 60 mm (Thickness), for covering under ground cable suitablly as per requirement for mechanical protection to the cable,including necessary connection,excavation& refilling of trenches for the following sizes as per specification.

Supplying & fixing of cable route marker precasted with cement concrete 1:2:4 (1 cement : 2 coarse s& :4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom & 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required, after every avg 500m of underground cable.

Straight Through Joints: Supply ,Erection and commissioning of heat shrinkable type Single Core H.T Cable straight through joints along with boots (SILCAB-T) to accommodate following sizes of 11kV XLPE(E) aluminium cable complete with all kit contents including earth continuity connection along with 3 nos. crimpling type aluminium lugs / thimbles of suitable capacity including making joints etc.in an approved manner complete as required and as per specification, 1CX120 Sqmm.

Straight Through Joints: Supply ,Erection and commissioning of heat shrinkable type Single Core H.T Cable straight through joints along with boots (SILCAB-T) to accommodate following sizes of 11kV XLPE(E) aluminium cable complete with all kit contents including earth continuity connection along with 3 nos. crimpling type aluminium lugs / thimbles of suitable capacity including making joints etc.in an approved manner complete as required and as per specification ,1CX35 Sqmm.

Supply carriage erection and commissioning of Street Light Poles 7.0 M long GI Octagonal type including concrete foundation for pole as per IS specifications. GI Octagonal Pole specifications are :- Section 7000mm,top/bottom dia 70/130mm,thickness 3mm,base plate 220x220x110mm thick, foundation bolt length 750mm,no. Of bolts 4x20 , 63mm dia double galvanised light holding arm

Providing of earthing as per RE Standard to GI Poles of street lighting along the track

Providing of 3.5 KVA light weight Mini Gen Sets as back up arrangement and their carriage installation testing and commissioning at all DT Locations with LT Change over(30A) arrangements

Supply , installation and commissioning of Elex or Equivalent make , 3 phase photo cell based timer switch includes 3 phase 40A contactor & 1 TPM MCB, 4SP MCBs,suitable for 10KW Load with MS Base wiring and termination. Specifications: a)  Input voltage range: 130V to 350V A.C, 50/60 Hz b) Bright backlit LCD display to show status c)  Separate setting for ON & OFF d)  Power failure memory backup e)  User friendly operations

Providing of 12ftx10ft Eglo type shelter sheds at 12 no. Sub stations complete with bedding and furnishing including attach washroom and development of base/land @350/sft

Supply installation testing and commissionig of 110W, LED street lights, with fittings,Havels/Philips/Bajaj or equivalent make, with life class not less than 50000 hrs, operating voltage of 100-300volt,Operating Temperature to -10 Deg C to +50 Deg C pressure die cast Al- alloy houising (Heat Sink), UV Stablized, poly carbonate cover and inbuilt driver with dust and water proof , conforming to IP 66 (2lights/pole)

Providing of CCTV Cameras along with wiring at 12 no. Sub stations (2no. Each/sub stn)

Operation and Maintanence incuding watch and ward from 2nd year after commissioning of the Job

Operation and Maintanence incuding watch and ward from 3rd year after commissioning of the Job

Operation and Maintanence incuding watch and ward from 4th year after commissioning of the Job