Police Department Tender

Waterproofing of all surfaces as directed by EIC by cleaning the surface with wire brush/ chipping hammer to make the surface free from all loose particles, dust, etc, then Repairing all damaged surfaces, dips in the slab and damaged corner fillets (i.e Gola ) with Pidicrete URP 301 or equivalent waterproofing compound in cement and sand mortar in the ratio of 5ltr.URP : 1 cement : 4 sand. Then applying one coat of Dr. Fixit Tourch shield Primer (@ 1 ltr per 3.5 to 4 Sqm) or Equivalent with brush over the surface prepared for waterproofing. After primer coat Dr. Fixit Tourch shield membrane 3160 (3 mm thick) or equivalent is layed over all horizontal and vertical surfaces prepared with tourching and sealing of overlapped joints (Min. overlap of joints = 100 mm). The tourch shield membrane laid shall be painted with Silver Paint in both directions including all carriages and cost of material involved.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)