Police Department Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Police Department - DGP Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Jan 2025
Closing Date28 Jan 2025
Tender Amount₹ 3,33,61,571
Technical
Technical
Financial
Bid Capacity
... View More
To determine the bid capacity required, we look at the conditions related to work experience and financial capabilities. The bid capacity required is linked to the advertised cost of the tender. For tenders with an advertised cost of more than Rs 250 lacs, the bidder should have successfully completed or substantially completed work(s) of a similar nature. The specifics are as follows:
- Three similar completed works valuing not less than 40% of the advertised cost.
- Two similar completed works valuing not less than 50% of the advertised cost.
- One similar completed work valuing not less than 80% of the advertised cost. Given the estimated cost of the work is ₹333.61 lakhs, we can calculate the bid capacity required using the provided formulas:
1. For three similar completed works: 40% of ₹333.61 lakhs = 0.4 * ₹333.61 lakhs = ₹133.44 lakhs.
2. For two similar completed works: 50% of ₹333.61 lakhs = 0.5 * ₹333.61 lakhs = ₹166.80 lakhs.
3. For one similar completed work: 80% of ₹333.61 lakhs = 0.8 * ₹333.61 lakhs = ₹266.88 lakhs. The bid capacity is also calculated using the formula: Bid Capacity = (A x N x M - B), where A is the maximum value of engineering works executed in any one year during the last five years, updated to the current price level, N is the number of years prescribed for completion of the work with a multiple factor applied, M is a factor of 2.5, and B is the value of existing commitments/ongoing works to be completed during the next N years, updated to the current price level. However, without specific details on A, N, and B, we cannot calculate a precise numerical value for the bid capacity using this formula. Thus, while we have specific requirements and can calculate potential bid capacities based on similar works, the detailed numerical bid capacity required cannot be determined directly without additional information on the bidder's past work value (A), the completion period (N), and existing commitments (B). Given the provided estimated cost and the formulas for similar completed works, the most direct calculations for bid capacity based on the tender's value are:
- ₹133.44 lakhs for three similar works,
- ₹166.80 lakhs for two similar works,
- ₹266.88 lakhs for one similar work. But since we cannot apply the full formula due to missing specifics, these values represent the requirements based on the tender's estimated cost rather than a comprehensive bid capacity calculation.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed or substantially completed work(s) of similar nature during the last five years. The specific requirements are as follows:
- Three similar completed works valuing not less than 40% of the advertised cost, which is ₹ 133.44 lacs.
- Two similar completed works valuing not less than 50% of the advertised cost, which is ₹ 166.80 lacs.
- One similar completed work valuing not less than 80% of the advertised cost, which is ₹ 266.89 lacs.
Substantial completion is defined as works completed up to a minimum of 80% of the allotted value. The bidder should provide work completion certificates for each work, containing details such as name of work, allotment number and date, allotted value of contract, value of completed work, and actual date of completion. Additionally, the bidder should have achieved an Annual financial turnover of at least 33% of the value of the tender amount in any one financial year in the last 5 years, with at least 50% of this turnover coming from the relevant field.
Costs
EMD
₹ 6,67,220Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DGPJK_270215_1Bid Award Id
ViewTender No
e-NIT/EE/PHC/39/2024-25Tender Authority
Police Department ViewPurchaser Address
-Website
http://http://www.jkpolice.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Disposal of excavated earth by mechanical transport including loading unloading and carraige complete from site of work to dumping site or as directed by EIC beyond 50 mtrs upto 10 Kms all complete.
730.94
225
164461.5
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring and shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 course sand :3 graded stone agg. 20mm nominal size).including all carriages and cost of material involved.
354.59
7788
2761688.76
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages and cost of material involved.
240.09
9395
2255813.61
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars
92119
115
10625926.65
... More
Centering and shuttering including strutting propping etc. and removal of form work for.
-
-
-
... More
Foundations, footings, basses of columns etc mass concrete.
489.33
286
140119.65
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
754.93
577
436009.82
... More
Columns, pillars, piers, abutments, posts and struts.
490.71
742
364376.71
... More
Suspended floors, roofs, landings, balconies and access platforms.
858.13
718
616308.97
... More
Edges of slabs and breaks in floors and walls under 20cms wide.
222.98
262
58465.36
... More
Stairs (excluding landings) except spiral stair cases.
7.85
676
5308.56
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
81.22
218
17738.45
... More
Supplying and filling in plinth with fine/sand under floors including, watering, ramming consolidating and dressing complete.
797.76
1100
877536
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including all carriages and cost of material involved.
267.61
9027
2415768.99
... More
Structural steel work riveted or bolted in built up section and framed work including cutting, fixing in position using structural steel etc, as required and applying a priming coat of approved steel primer all complete including all carriages and cost ofmaterial involved.
17531.6
138
2422867.12
... More
P/F Hi rib profiled Pre-colour coated sheets of eco-friendly colour comprising 0.50mm thickness for roofing including hooks, bolts and nuts 8mm dia or with PVC limpet washers complete upto any pitch in horizontal/vertical or curved surfaces excluding the coat of purlins, rafters and trusses and including cutting to size and shape wherever required all complete.
545.43
1200
654516
... More
Providing & Fixing flashing, valleys and ridges of colour coated galvalume plain sheet of required width using self drilling and self tapping fasteners of reputed make complete as directed. Including cost of all material, leads, lifts and carriages etc upto site of work complete).
53.45
650
34742.5
... More
Providing and fixing of 300mm x 35mm thick 1st class kail wood eaves boarding incl cost of nails complete.
100
800
80000
... More
Providing and fixing of 12mm thick panelling incluidng cost of frame work by way of using 2"x3" Budloo wood including cost of nails and scaffolding for soffits complete job.
37.91
2200
83402
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)(2nd Class Kail Wood/ Silver wood).
4.7
101081
475084.7
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
320
207
66352
... More
15mm cement plaster on rough side of single or half Brick wall of mix: 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of material involved.
1039.33
306
318918.41
... More
18-20mm thick cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement: 5 coarse sand) finished wiith a top layer 6mm thick in 1:6 mix (1 cement : 6 fine sand) including all carriages and cost of material involved.
505.66
362
183377.6
... More
6mm cement plaster on ceiling of mix: 1:3 mix (1 cement : 3 fine sand) including all carriages and cost of material involved.
607.25
241
146499.06
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 600x600 mm).
552.42
1490
823133.42
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). including all carriages and cost of material involved.
33.67
6591
221927.39
... More
Dry random rubble masonary in foundation and plinth using quarry stone with bond stones including all carriages and cost involved.
96.04
5536
531730.26
... More
Providing and fixing ceramic glazed floor tiles 30x30cm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY,KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.As per the specification /selection by Architec.
50.15
1229
61639.37
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 10mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in- charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material. As per the specification /selection by Architec.
346.5
1170
405664.88
... More
Waterproofing of all surfaces as directed by EIC by cleaning the surface with wire brush to make the surface free from all loose particles, dust, etc, then Repairing/ making the corner fillets (i.e Gola ) with Dr, Fixit Pidicrete URP 301 or equivalent waterproofing compound in cement and sand mortar in the ratio of 5ltr.URP : 1 cement : 4 sand. Then applying one coat of Dr. Fixit Tourch shield Primer (@ 1 ltr per 3.5 to 4 Sqm) or Equivalent with brush over the surface prepared for waterproofing. After primer coat Dr. Fixit Tourch shield membrane 3160 (3 mm thick) or equivalent is layed over all horizontal and vertical surfaces prepared with tourching and sealing of overlapped joints (Min. overlap of joints = 100 mm).including all carriages and cost of material involved.
396.64
1692
671154.54
... More
Providing and fixing gang saw cut mirror polished (pre molded and pre-polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shades , colour and texture laid over 20mm thick base cement mortar 1:3 (1 cement :3 coarse sand) with joints filled with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing molding and polishing to edge to give high gloss finish etc. Complete at all levels. Granite of any colour and shape (area of slab over 0.5 Sqm) 18mm thick.(As per the directions of engineer in charge).
211.03
4132
872070.92
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer in-Charge Granite Work.
68.95
381
26318.22
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second kail wood.
101.26
2597
263048.17
... More
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class Kail wood/Silver wood.
85.05
3101
263786.83
... More
Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.
1805.74
138
249372.69
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with water thinable cement primer.
1300.08
164
213993.17
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm).
505.66
185
93648.23
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.
414.95
194
80770.02
... More
Providing and fixing of following aluminium hardware items including screws etc complete Job as directed by EIC.
-
-
-
... More
200mm long Aldrop
24
400
9600
... More
150mm Handle
48
75
3600
... More
100mm Handle
120
65
7800
... More
Tower bolt 150mm
120
80
9642
... More
Tower bolt 100mm
48
57
2752.8
... More
I Hook
60
57
3441
... More
Supply and installation of stain finish stainless steel AISI 304 stainless steel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge) weight 3.70 Kg. erected with chemical grout to be fixed on the top of slab/skirting (Spigot fixed) at Max c/c distance of 600mm complete with all necessary bends and terminations complete, with cover plate, fixings, end terminations, custom bends, as manufactured by Dline or approved equivalent, height shall be 1050mm above the finished skirting level complete as per architectural drawings, pattern & design to be approved by EIC.
18.29
1500
27435
... More
Supply and installation of stain finish stainless steel AISI 304 stainless steel posts having 100mm dia tube, erected with chemical grout to be fixed on the top pf slab/skirting (Spigot fixed) at corners complete as manufactured by Dline or approved equivalent & shall be fixed above the finished level complete as per architectural drawings.
2
3500
7000
... More
Providing and fixing of wardrobe 2’-0” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board of approved make and quality and fixing 1mm thick mica of approved colour and make over the frame and shutter as around including cost of all fixtures i.e. glazing, locking arrangements, handle, magnetic catcher, tower bolts etc. (Hettich fittings or equivalent make) as per the directions of site Engineer. (Complete).
384
650
249600
... More
Providing and fixing of Kitchen Almirah’s 1’-6” deep of approved design & make including shutters, partitioning with 19mm thick (water proof) ply board & back covering with 6mm water proof ply board and finishing with dulmica including all locking arrangements and hydraulic hinges of approved brand as per the directions of site Engineer. (complete Job).
40
500
20000
... More
Providing and applying touch wood polish two or more coats of approved brand and manufacture complete.
79.28
144
11440.1
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate including all carriages and cost of material involved
18.96
416
7896.84
... More
15mm cement plaster on the rough side of single or half brick wall in 1:4 mix finished with a floating coat of neat cement of mix.
97.58
550
53727.55
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete.
51.67
1390
71844.55
... More
Providing and fixing of following PVC fittings/ Pipes including trenching and refilling complete Job. (Standard make as approved by EIC)
-
-
-
... More
100mm dia door tee
6
350
2100
... More
100mm dia plain bend
6
250
1500
... More
100mm dia coller
6
200
1200
... More
100mm dia P-trap
6
350
2100
... More
100mm dia door bend
6
350
2100
... More
100mm dia plain tee
6
200
1200
... More
100mm PVC Prince Cliff
6
100
600
... More
100mm x75mm dia Reducer
6
200
1200
... More
100 x45mm door bend
6
200
1200
... More
75 x45mm door bend
6
250
1500
... More
75mm dia door bend
6
250
1500
... More
75mm dia door tee
6
250
1500
... More
75mm dia plain bend
6
150
900
... More
75mm dia coller
6
150
900
... More
75mm dia plain tee
6
150
900
... More
75mm PVC Prince Cliff
6
100
600
... More
75mm PVC cowl cap
6
100
600
... More
50mm dia PVC elbow
6
150
900
... More
50mm dia PVC Tee
6
150
900
... More
Providing and fixing of following PVC fittings/ Pipes (Type –B) including trenching and refilling complete Job. (Standard make as approved by EIC).
-
-
-
... More
PVC 100mm dia Pipes
100
400
40000
... More
PVC 75mm dia Pipes
100
300
30000
... More
PVC 50mm dia Pipes
50
200
10000
... More
Providing laying and fixing heavy duty Glass Fibre reinforced PPR (Polypropylene Random Copolymer) pipes & fittings of approved quality with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing, Unions etc including necessary excavation, backfilling, fixing with clamps, drilling holes in walls, slabs, hydraulic testing complete Job.
-
-
-
... More
15mm dia
200
300
60000
... More
20mm dia
50
400
20000
... More
25mm dia
60
500
30000
... More
32mm dia
30
600
18000
... More
40mm dia
30
700
21000
... More
Supply, Installation testing and commissioning of Gunmetal, male or female threaded isolation control valve (Ball valve) of approved quality conforming to IS 778, PN 10 with necessary specials, unions, nipple etc to complete the Job.
-
-
-
... More
16mm dia
2
350
700
... More
20mm dia
2
500
1000
... More
25mm dia
2
550
1100
... More
32mm dia
2
600
1200
... More
40mm dia
2
750
1500
... More
50mm dia
2
850
1700
... More
P/F of glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm).
11.4
1070
12200.28
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid
6
4000
24000
... More
Providing and fixing of C P health faucet 900mm long of approved / standard make.
6
800
4800
... More
Providing and fixing of C P Basin Mixer of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
6
4000
24000
... More
P/F wash basin with C.I. / M.S. brackets, 15mm C. P brass mixer, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: flat back white vitreous china wash basin size 630x450mm
6
3000
18000
... More
Providing and fixing of wall Mixer with M S brackets of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
6
4000
24000
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200mm.
3
2500
7500
... More
Providing and fixing of C P Bib cock of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
6
1000
6000
... More
Providing and fixing of C P short body bib cock of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
6
900
5400
... More
Providing and fixing of C P Angle valve of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
15
900
13500
... More
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms
4
350
1400
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:32 mm dia.
6
90
540
... More
Providing and fixing of C P Soap case of approved quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
6
150
900
... More
Providing and fixing of C P Grating with Anti cockroach trap below the grating jings type of approved / standard quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
12
125
1500
... More
Providing and fixing of unplasticized PVC connection pipe with brass unions 45cm length 15mm nominal bore.
12
200
2400
... More
Providing and fixing of C P Towel Rod of approved quality (Hindware, Jaguar, Kerovit or equivalent) as directed by EIC.
6
800
4800
... More
Providing and fixing of C P Towel Ring of approved quality (Hindware, Jaguar, Kerovit or equivalent) as directed by EIC.
6
500
3000
... More
Providing and fixing of C P Cup of approved / standard quality (Hindware, Jaguar, Kerovit or equivalent make as approved by EIC).
24
150
3600
... More
Providing and fixing of 600x450mm looking Mirror of superior glass ( of approved quality) complete with 6mm thick board ground fixed to wooden cleats with CP brass crews and washers compelte.
8
700
5600
... More
Providing and fixing of Steel shelve of superior quality as approved by EIC).
8
550
4400
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
12000
11
132000
... More
Providing and fixing of 50 ltrs water heater Geyser of approved make like venus, Jupiton, Racold or equivalent make including all necessary fittings complete Job.
6
12000
72000
... More
Construction of brick masonry plate form for WC’s using 2nd class bricks in 1:4 mix including carriages of all materials involved.
6
1800
10800
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 course sand) with C. I cover and frame, foundation concrete 1:4:8 mix ( 1 cement: 4 course sand : 8 graded stone agg. 40mm nominal size) inside plastering 12mm thick cement mortar 1 : 3 ( 1 cement : 3 course sand) finishing with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone agg 20mm nominal size) finishing with floating coat of neat cement complete. Including all carriages and cost of materials involved.
-
-
-
... More
18”x18”
4
3000
12000
... More
12”x12”
3
2500
7500
... More
Carriage of Materials from source to site:
-
-
-
... More
Stone aggregate 40mm and down gauge av. lead 10 kms
272.27
214
58467.26
... More
Sand av. lead 10 kms
210.02
197
41489.45
... More
Bricks av. lead 10 kms
127112.95
-
67369.86
... More
Electrical Part
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box etc. as required.
159
707
112413
... More
Supply and fixing of 5 inch dia Fan Box / concealed box with round sheet cover for covering the base and bottom and dual painted with red oxide
20
90
1800
... More
Providing Installation testing and commissioning of Ceiling Fans of approved brands with connections etc as required
20
1900
38000
... More
Supply & Fixing of additional Fan rods
10
58
580
... More
Supplying and fixing two module Stepped type electronic Fan Regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
20
342
6840
... More
Supply,installation,testing and commissioning of Ceiling LED Panel type 14 watt day milky fitting with connections as required
110
1277
140470
... More
Supply & installation, of Conciel Box for LED Panel as required
110
90
9900
... More
Providing and fixing of Batten Holder/ Angle holder including connections as required.
5
117
585
... More
Providing and fixing of 9 watt LED Bulb
5
120
600
... More
Supply & Installation of Bulk Head Lights including connections,testing commissioning etc as required
6
1029
6174
... More
Supply & Installation of Exhaust Fans With Stylish Plastic Exhaust 200 mm(8") in the existing opening including connections,testing commissioning etc as required
8
1625
13000
... More
Providing and fixing Single Bracket mirror /Wash BasinLight decorative type surface mounted and complete with 9 watt LED Bulb.
4
650
2600
... More
Supply & Installation of Wall Fans With ABS blades and easy tilting mechanism,2200 RPM including connections,testing commissioning etc as required
2
3690
7380
... More
Providing ,installation,testing and Commissioning of 100 watt LED Flood light with GI Pipe with connection etc as required
4
6300
25200
... More
Supply and fixing Indicator on the existing modular plate and switch box excluding as required
15
45
675
... More
Supply & drawing 2 pair0.5 sqmm FR PVC Insulated annealed copper conductor,unarmoured Telephone cable in the existing surface/recessed steel/ PVC Conduit as required
430
22
9460
... More
Supply and fixing of modular Computer socket on modular zinc passivated box of 2 module
8
345
2760
... More
Providing & Laying Cat-6 Computer wire in existing Conduit
320
35
11200
... More
Supply and fixing of Ceiling rose on the existing junction box/wooden box including connections as required
8
34
272
... More
Supply and fixing Modular Blanking Plate on the existing modular plate and switch box excluding modular plateas required
24
22
528
... More
Supplying laying & making outdoor connections including aluminium lugs/ thimbles etc. and other jointing materials for 3.5X 50 sqmm LT Power Cable ,Almunium Conductor, ARMOURED
98
492
48216
... More
Earth work/ Trench Cutting 60 cm X 60 cm for laying of 75 mm dia PVC Pipe including laying of 50 sqmm Armoured cable and RE-filling of trench
82
230
18860
... More
Supply ,instalation,fabrication Testing & commissioning of Low voltage Sub Main Panel on 415 volts 3 phase 50 htzs of 2mm thick CRCA / Sheet of powder size 3X4 rft . a) 300 amp TPN A1.Bus bar with required nos of thimbles etc ( 02 No) b)250 amp 4 pole MCCB with 35 ka breaking capacity c)125 amp 4 pole change over switch d)63 amp TPN (2 nos) e) 40 amp TPN (02 nos) f)VSS meter/switch g) ASS meter/ switch h) 32 Amp DP MCB (02 no)
1
80000
80000
... More
Supplying and fixing of following way three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
8 way (4 + 24) double door
4
4601
18404
... More
Supply & Fixing following size TPN
-
-
-
... More
63 amps TPN
2
2777
5554
... More
40 amps TPN
2
2626
5252
... More
Supply & Fixing MCB DP 32 amps
2
692
1384
... More
Supplying and fixing of 5 amps to 32 amps rating 240/415 volts "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Approved Brand.
76
199
15124
... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (inclusive) as required.
-
-
-
... More
2 x 1.5 Sqmm
460
97
44620
... More
2 x 2.5 Sqmm + 1 x 2.5 sqmm
480
167
80160
... More
2 x 4 Sqmm + 1 x 4 sqmm
442
200
88400
... More
2 x 6 Sqmm + 1 x 6 sqmm
198
249
49302
... More
4 x 6 Sqmm + 2 x 6 sqmm earth wire
72
394
28368
... More
4 x 10 Sqmm + 2 x 6 sqmm earth wire
72
543
39096
... More
Supply & fixing suitable size 4 module GI Boxwith modular plate and cover infront including providing and fixing 15/16 amps modular Socket outlet and 15/16 amps modular Switch, connections etc as required.
22
732
16104
... More
Supplying and fixing suitable size 8 module GI Box with modular plate & cover infront including providing 3 Nos 6 Amp modular socket Controlled by 16 Amp Switch including connections etc. as reqd.
8
1044
8352
... More
Providing and fixing of 2 way AC Box with MCB mounting and connections etc as required.
8
525
4200
... More
Supply & fixing testing & commissioning of 1.5 Ton Hot & cold AC Inverter Series,5 Star including Copper pipe wherever required
2
69000
138000
... More
Supply & fixing testing & commissioning of wall mounted copper stabilizer for AC
2
9500
19000
... More
Supplying and fixing following 5 pin 5/6 A modular switch /socket on the existing modular plate & swich box including connections etc. as reqd.
30
196
5880
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
22
206
4532
... More
Chemical earthing including accessories etc as required complete job
1
8550
8550
... More
S.I.T.C of Photo smoke detector. Make system Censor
25
1800
45000
... More
S.I.T.C of Manual call box with hammer complete as req.
4
950
3800
... More
S.I.T.C of electronic hooter with audible range of 25-30mtr with suitable output wattage as req. Make
4
1100
4400
... More
SITC of 2 zones conventional fire alarm panel
1
10500
10500
... More
S/l of 2 x 1.5 sqmm FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
775
97
75175
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements