Police Department Tender
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Police Department - DGP Tender
Building Construction
Eprocure
Opening Date2 Jan 2025
Closing Date22 Jan 2025
Tender Amount₹ 49,42,59,000
Costs
EMD
₹ 98,85,180Document Cost
₹ 25,000Tender Fee
Refer Documents
Summary
Construction Of New District Jail Reasi ( C. No.59)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DGPJK_269438_1Tender No
Fresh 59 of PHC JAMMU DIV/2024-25 Dated-02-01-2025 ( 2nd Call)Tender Authority
Police Department ViewPurchaser Address
-Website
http://http://www.jkpolice.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Hard rock (blasting prohibited)
3880.83
1069
4148995.35
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
31856.17
198
6329820.98
... More
Extra for every additional lift of 1.5 m or part thereof in excavation/banking
excavated or stacked material
-
-
-
... More
All kinds of soil
248.72
81
20307.99
... More
Ordinary & Hard rock (blasting prohibited)
471
146
68977.95
... More
Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
144.88
787
114078.51
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
Chlorophriphos/Lindane emulsifiable concentrate of 20%
18097.5
200
3632168.25
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Treatment of soil under existing floors using chemical emulsion (Chlorophriphos/Lindane E.C. 20% with 1% concentration) @ one litre per hole, 300mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floor:
4686.29
211
989510.13
... More
Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:
-
-
-
... More
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
1384.66
4908
6796188.21
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
1264.05
4419
5586911.39
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary xcavation, levelling & dressing & finishing the top smooth.
1336.42
496
663732.99
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1
cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
1600.75
372
596839.64
... More
Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using
1.7 kg per square meter on damp proof courses after cleaning the surface with brushes and
finally with a piece of cloth lightly soaked in kerosene oil.
1600.75
136
219062.64
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
3109.46
262
815611.36
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
20451.18
573
11735909.64
... More
Suspended floors, roofs, landings, balconies and access platform
6648.44
635
4225748.46
... More
Shelves (Cast in situ)
202.67
635
128817.05
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
13304.58
502
6690208.05
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
9651.3
680
6564331.7
... More
Stairs, (excluding landings) except spiral-staircases
673.27
807
543665.53
... More
Edges of slabs and breaks in floors and walls Under 20 cm wide
3978.22
242
963922.71
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
641138.6
79
50810234.05
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
749204.14
79
59374428.1
... More
Providing and laying in position machine batched and machine mixed design mix M-25
grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in
recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improveworkability without impairing strength and durability as per direction of Engineer-incharge.
Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as
per design mix is content considered payable or recoverable separately.
-
-
-
... More
All work upto plinth level
6476.74
7192
46581037.92
... More
All works above plinth level upto floor V level
6095.35
8457
51548679.72
... More
Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the
specified cement content used is payable/ recoverable separately.
-
-
-
... More
Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
840.33
101
85461.56
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
4202.17
6183
25985168.74
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in
superstructure above plinth level upto floor five level
4078.17
1323
5398069.72
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
2518.64
930
2344350.11
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
2518.64
74
188268.34
... More
Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine
cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of
required size, approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to
edges to give high gloss finish etc. complete at all levels Granite of any colour or shade Area of slab over 0.50 sqm
148.43
3977
590350.64
... More
Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc.
including machine polishing to edge to give high gloss finish etc. complete as per design
approved by Engineer-in-Charge. Granite work
202.47
432
87507.53
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
175.41
426
74829.91
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
126
707
89201.7
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
2546.68
1161
2956822.81
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood
3.52
140082
493090.22
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
352.92
2031
717080.5
... More
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
352.92
401
141662.09
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.
5768.79
179
1037805.32
... More
Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
540
163
88047
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
176
929
163653.6
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
250x10 mm
352
102
36009.6
... More
150x10 mm
2578
80
207142.3
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
352
66
23355.2
... More
100 mm
2578
52
134829.4
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper
176
54
9609.6
... More
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
779
62
48492.75
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
176
1839
323769.6
... More
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of
5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2
Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge.
1084.54
478
518952.39
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing.30 mm thick plain PVC door shutters
379.21
2870
1088636.07
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1 mm thick
705.84
798
563366.2
... More
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required sizeSecond class teak wood
397.6
4498
1788643.36
... More
Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded
1790
92
166201.5
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, toppers, handles, including applying a priming coat of approved steel primer.
6.3
8505
53581.5
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
32.4
3238
104917.68
... More
Providing and fixing ball bearing for rolling shutters.
4
483
1932.4
... More
Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 10.00 sqm and upto 16.80 sqm in the area
32.4
1111
36009.36
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
1790
104
186607.5
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
33169.24
133
4421459.69
... More
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :
2432.03
1915
4657702.26
... More
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.
469.82
2072
973537.51
... More
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate.
5301.96
461
2448710.23
... More
Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.
906.28
2072
1877948.1
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
87.55
7880
689968.42
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
1123.56
147
165275.68
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length above normal size up to 1.05 metre.
532.95
31
16681.34
... More
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown
649.42
1115
724622.84
... More
roviding & Laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete. Size of Tile 600x600 mm
851.51
1482
1261937.82
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete..Size of Tile 600x600 mm
91.05
1531
139474.94
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75mm deep chase.
2074.16
217
452063.17
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
97
247
23988.1
... More
12mm plaster 1:4 (1 cement: 4 coarse sand)
18212.5
260
4736160.63
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
22946.12
278
6392789.03
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
7400.5
221
1639210.75
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface toprepare the surface even and smooth complete.
944.5
216
204012
... More
Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications
25613
82
2115633.8
... More
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
34711.99
91
3186560.68
... More
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.
4886.56
140
684607.06
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete .1 mm thick
1306.83
129
169234.49
... More
Supply & Fixing of GRC Jali Products As Per approved designs & sizes & thickness 50mm Border Inner Jali Thikness 25-30 mm The Screens should be made from ‘53 grade’ White Portland Cement manufactured by ,Birla Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in Synthetic Rubber / FRP Mould manufactured by ‘Reckli’ or equivalent etc complete as per detail and design given and as per direction of Enginner in charge. (M.S Frame shall be paid for seperatly)
11.48
6000
68880
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.
7397.66
139
1031233.8
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
1479.53
17
25373.94
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire
2280.22
19
43552.2
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.
23116
88
2045766
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
1215
1041
1265422.5
... More
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem
rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
180
8265
1487709
... More
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.
4500
78
351675
... More
Providing and applying tack coat using hot straight run bitumen of grade – VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.
-
-
-
... More
On W.B.M. @ 0.75 Kg/sqm.
4500
55
249390
... More
On bitumen surface @ 0.50 Kg/sqm.
4500
42
189450
... More
2 cm premix carpet surfacing with 1.8cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 size respectively, per 100 sqm and 52kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt.
4500
163
735300
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment).
(Precast C.C. kerb stone shall be approved by Engineer-in-charge).
79.23
8328
659851.21
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge.60mm thick cement concrete paver block of M-35 grade with approved colour, design &
pattern.
5186.09
819
4250519.36
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
7475.11
449
3362678.23
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
2083.9
535
1115615.87
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
694.63
1269
881520.2
... More
Filling the gap in between aluminium frame and adjacent RCC/Brickwork/ Stone Work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge Upto 5mm depth and 5mm width
2990.5
86
257781.1
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
1272.03
700
890802.61
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
-
-
-
... More
For vertical surface two coats @ 0.70 kg per sqm per coat
226.78
480
109058.5
... More
For horizontal surface one coat @1.10 kg per sqm.
110.22
367
40532.03
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
5093.01
1295
6596466.55
... More
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).
706.91
414
292872.81
... More
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
-
-
-
... More
a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
-
-
-
... More
b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
-
-
-
... More
c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
-
-
-
... More
d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
-
-
-
... More
e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge.
-
-
-
... More
Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this sub- head. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
-
-
-
... More
Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is payable separately. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
-
-
-
... More
1. Performance Laboratory Test for Air Leakage Test (-50pa to –300pa) & (+50pa to +3--pa) as per ASTM-E-283-04 testing method for a range of testing limit 1 to 200 mVhr"
-
-
-
... More
2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME-331-09 testing method for a range up to 2000 ml.”
-
-
-
... More
3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml”
-
-
-
... More
4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm”
-
-
-
... More
5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site
-
-
-
... More
6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
76.04
3510
266938.42
... More
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural silicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor.“(Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)“For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.“ (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
76.04
3718
282769.95
... More
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer- in-Charge.
6.27
3671
23020.31
... More
CARRIAGE OF MATERIAL
-
-
-
... More
Carriage of Material from source old site
-
-
-
... More
Aggregate for an average of 15 km
10884.78
297
3232997.36
... More
Sand for an average of 15 km
6318.83
297
1876818.89
... More
Carriage of Material by Head load outside jail premises to inside jail up to site by manual labour
17203.61
222
3824362.5
... More
Bricks for an average 30km
2139593
1
2481927.88
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group B
600.1
783
469878.3
... More
Group C
1318
990
1304820
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group B
302
508
153416
... More
Group C
523
555
290265
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
6700
200
1340000
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
2700
308
831600
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
CIRCUIT / SUBMAIN WIRING
-
-
-
... More
2x1.5 sq mm + 1x1.5 sq mm earth wire
9500
146
1387000
... More
2x2.5 sq mm + 1x2.5 sq mm earth wire
8042
167
1343014
... More
4x2.5 sq mm + 2x2.5 sq mm earth wire
3448
233
803384
... More
2x6 sq mm + 1x6 sq mm earth wire.
40
249
9960
... More
2x10 sq. mm + 1x6 sq. mm earth wire
980
328
321440
... More
2x16 sq. mm + 1x6 sq. mm earth wire
820
419
343580
... More
4x6 sq mm + 2x6 sq mm earth wire
120
394
47280
... More
4x10 sq mm + 2x6 sq mm earth wire
450
543
244350
... More
4x16 sq mm + 2x6 sq mm earth wire
240
752
180480
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
892
401
357692
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
463
495
229185
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (For UPS Supply)
76
582
44232
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet (near equipment point) and 25 A modular SP MCB, “C” curve (at accessible point) including connections, painting etc. as required.
90
639
57510
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
Telephone socket outlet
50
119
5950
... More
TV anteena Socket Outlet
51
119
6069
... More
Bell push
36
126
4536
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (75mmX75mm) - For Telephone,TV outlet & Data
137
243
33291
... More
3 Module (100mmX75mm) - For Socket outlet.
51
267
13617
... More
6 Module (200mmX75mm) - For Socket outlet.
58
287
16646
... More
8 Module (125 mmX125 mm)
51
383
19533
... More
12 Module (200 mmX150 mm)
72
434
31248
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth
bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
12 Way, Double Door
66
2053
135498
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
-
-
-
... More
6 Way (4+18), Double Door
7
3693
25851
... More
8 Way (4+24), Double Door
28
4601
128828
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required.
-
-
-
... More
12 way (4 + 36), Double door
1
9828
9828
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C series Miniature Circuit Breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc,as required.
-
-
-
... More
Single pole
1146
199
228054
... More
Triple pole and neutral
7
1092
7644
... More
Supplying and fixing following rating, double pole, 240 volts, MCB complete with connections, testing and commissioning etc. as required. 63 Amp
66
1000
66000
... More
Supplying and fixing following rating, four pole, 415 volts, MCB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 Amp
28
1750
49000
... More
63 Amp
1
1750
1750
... More
Supplying and fixing of following rating double pole (Single phase and neutral) 240 volts, residual current circuit breaker (RCCB), having a current sensivity current 30 miliampere in the existing MCB DB complete with connections, testing & commissioning etc. as required.
-
-
-
... More
25 Amps
21
1927
40467
... More
40 Amp
84
2095
175980
... More
63 Amp
69
2640
182160
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
560
33
18480
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
195
84
16380
... More
25 mm
1120
90
100800
... More
32 mm
85
92
7820
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
221
32
7072
... More
Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 14 way, Double door SPN MCBDB
66
864
57024
... More
Supplying and fixing Cable End Box (Loose wire box) (IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
... More
For 6 way, Double door TPN MCBDB
7
1062
7434
... More
For 8way, Double door TPN MCBDB
29
1239
35931
... More
Supply, erection, testing and commissioning of following sizes of splitter of aluminium die cast body in suitable size of G.I. Box.8 way
6
1764
10584
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single corecable etc. as required.
286
171
48906
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
286
342
97812
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/ LED fittings of all types, complete with all accessories and tube/lamp/ LED etc. directly on ceiling/ wall/ false ceiling with GI Chain included for fixing wherever required, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
1306
168
219408
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required2x1.5 sq mm
40
41
1640
... More
Supply of following sizes of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, armoured, served, sheathed 1100 volts grade. (Cable shall be purchased only after approval of cable schedule by architect / consultant).
-
-
-
... More
3.5 core, 300 sq.mm.
350
2353
823550
... More
3.5 core, 240 sq.mm.
450
1926
866700
... More
3.5 core, 185 sq.mm.
1050
1500
1575000
... More
3.5 core, 120 sq.mm.
400
1009
403600
... More
3.5 core, 95 sq.mm.
20
822
16440
... More
3.5 core, 70 sq.mm.
110
658
72380
... More
3.5 core, 50 sq.mm.
250
487
121750
... More
3.5 core, 35 sq.mm.
1450
363
526350
... More
4 core, 25 sq.mm.
20
312
6240
... More
4 core, 16 sq.mm
250
255
63750
... More
4 core, 10 sq.mm
475
213
101175
... More
4 core, 6 sq.mm
400
177
70800
... More
2 core, 16 sq.mm
2160
175
378000
... More
2 core, 10 sq.mm
700
172
120400
... More
2 core, 6 sq.mm
1475
136
200600
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
... More
Upto 35 sq. mm
2175
323
702525
... More
Above 35 sq. mm and upto 95 sq. mm
100
338
33800
... More
Above 95 sq. mm and upto 185 sq. mm
50
352
17600
... More
Above 185 sq. mm and upto 400 sq. mm
60
396
23760
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Upto 35 sq. mm
4755
31
147405
... More
Above 35 sq. mm and upto 95 sq. mm
380
47
17860
... More
Above 95 sq. mm and upto 185 sq. mm
1670
64
106880
... More
Above 185 sq. mm and upto 400 sq. mm
1000
112
112000
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
... More
Upto 35 sq. mm (clamped with cable tie)
20
33
660
... More
Above 35 sq. mm and upto 95 sq. mm (clamped with cable tie)
20
74
1480
... More
Above 95 sq. mm and upto 185 sq. mm (clamped with cable tie)
20
93
1860
... More
Above 185 sq. mm and upto 400 sq. mm (clamped with cable tie)
20
150
3000
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2 x 6 sq. mm (19mm)
24
198
4752
... More
2 x 10 sq. mm (19mm)
24
198
4752
... More
2 X 16 sq. mm (22mm)
80
212
16960
... More
3½ X 35 sq. mm (32mm)
34
300
10200
... More
3½ X 50 sq. mm (35mm)
2
329
658
... More
3½ X 70 sq. mm (38mm)
4
368
1472
... More
3½ X 95 sq. mm (45mm)
2
473
946
... More
3½ X 120 sq. mm (45mm)
6
489
2934
... More
3½ X 185 sq. mm (57mm)
10
702
7020
... More
3½ X 240 sq. mm (62mm)
8
809
6472
... More
3½ X 300 sq. mm (70mm)
22
936
20592
... More
4 X 10 sq. mm (25mm) (The Termination including 4 x 6 sq. mm cable)
38
219
8322
... More
4 X 16 sq. mm (28mm)
12
250
3000
... More
4 X 25 sq. mm (28mm)
2
250
500
... More
Supply & Laying of following sizes of 1.1KV grade multistranded copper conductor FRLS insulated wire including termination complete as required in existing cable tray.
-
-
-
... More
1C x 16 sq.mm PVC Insulated cu wire including end termination.
20
217
4340
... More
Supply, Installation, Testing & Commissioning of Earthing Junction Box size - 400mm x 300mm x 80mm made out of 16 SWG CRCA sheet with seven tank process & powder coating, earthing link (32mmx6mm copper strip), front door with glass as complete as required.
51
5188
264588
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
60
599
35940
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
20
644
12880
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
6
1063
6378
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
1168
2336
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
3
1220
3660
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
1274
2548
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
6
1220
7320
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
1274
2548
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm wide x 50 mm depth x 1.6 mm thickness.
6
1528
9168
... More
150 mm wide x 50 mm depth x 1.6 mm thickness.
2
1778
3556
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
830
341
283030
... More
200 mm dia (OD-200 mm & ID-175 mm nominal)
970
598
580060
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
167
6216
1038072
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
10724
85792
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
1110
44
48840
... More
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
20
1009
20180
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
380
206
78280
... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
160
1844
295040
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
64
448
28672
... More
Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
64
280
17920
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
64
93
5952
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
1440
104
149760
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
1040
163
169520
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
64
102
6528
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
1280
176
225280
... More
Providing and fixing earth bus of 50 mm X 5 mm GI strip on surface for connections etc. as required.
320
412
131840
... More
11 KV END TERMINATION:
-
-
-
... More
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
-
-
-
... More
3C x 240 Sqmm, 11KV XLPE
5
11681
58405
... More
11 KV H.T. CABLE:
-
-
-
... More
Supplying of 11 KV grade aluminium conductor, cross linked polyethylene (XLPE) insulated individual core screened, flat steel/strip armoured PVC sheathed cable complete as required.
-
-
-
... More
3C x 240 Sqmm, 11 KV XLPE
100
2926
292600
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
100
482
48200
... More
Supply of following sizes of 1.1KV grade Copper conductor XLPE insulated and FRLS PVC sheathed armoured control cable including termination conforming to relevant IS. (Cable shall be purchased only after approval of cable schedule by architect / consultant).
-
-
-
... More
4 core, 2.5 sq.mm.
50
278
13900
... More
10 core, 2.5 sq.mm.
100
643
64300
... More
12 core, 2.5 sq.mm.
50
738
36900
... More
SAFETY EQUIPMENT
-
-
-
... More
Supplying & Placing of First aid box as approved by St.John Ambulance Brigade /Indian Red Cross society conforming to IS : 2217 - 1963 etc as reqd.
4
1223
4892
... More
Supplying & Installation of Shock treatment chart duly mounted on a wooden frame with glass on, as required in 2 languages (Hindi & English) etc. as reqd
10
1125
11250
... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 1.1 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
20
3425
68500
... More
Supplying and Laying of Rubber mat 1000 mm. Wide to withstand 11 KV dielectric strength as per latest IS 15652-2006 etc. as reqd.
10
3131
31310
... More
Supply, Installation, Testing and Commissioning of 3.6 KW AC EV Charger, 240V, 50Hz AC, with Surge Protection: 2.5 kV, over voltage & over current protection, external RCD, with cable, In case of abrupt removal of charging cable, system should immediately detect and save the data, Door & Lock reliability (for opening / closing), and Switch- complying with IEC 60669-1 etc as required.
10
53822
538220
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
... More
1 run of cable
3670
49
179830
... More
2 run of cable
1770
82
145140
... More
3 run of cable
1000
114
114000
... More
LIGHT FIXTURE & POLES
-
-
-
... More
Providing/fixing of 18Wsurface LED slim 230V , complete in all respects. With 2kv surge protection. Industrial .As per direction of EIC
114
1000
114000
... More
Providing/fixing of 13.5Wsurface LED slim 230V , complete in all respects. With 2kv surge protection. Industrial. As per direction of EIC
601
900
540900
... More
Providing/fixing of 9-10W surface LED slim 230V , complete in all respects. With 2kv surge protection. Industrial. As per direction of EIC
250
1400
350000
... More
Supply of LED Mirror batten light of 2ft length with a system wattage of 10-11W. As per direction of EIC
36
400
14400
... More
Providing/fixing of 4 ft LED slim 16 watt 110lm/w 230V Batten type lights(T5), complete in all respects. With 2kv surge protection. Industrial . As per direction of EIC
285
560
159600
... More
Supplying,Fixing, Testing and Commissioning of outdoor LED street light luminaries flood lights 150 Watt on boundry walling (nearly 900 meter and LED be installed towords outside at distance of 20 meters) . Reputed make as per approval of engineering wing. As per direction of EIC
18
12556
226008
... More
Providing and fixing of 48 inches Sweep energy efficient ceiling fan of approved sample at site including wiring the down rods of standard length (30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc including Fan Junction MS box as required. As per direction of EIC
276
2200
607200
... More
Providing and fixing of 900mm Sweep energy efficient ceiling fan of approved sample at site including wiring the down rods of standard length (30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc including Fan Junction MS box as required. As per direction of EIC
10
2100
21000
... More
Supply, Installation, Testing and Commissioning of 250 mm sweep decorative Fresh air fan with all accessories . As per direction of EIC
102
1613
164526
... More
Supplying,Fixing, Testing and Commissioning of outdoor LED street light luminaries (Arm type) 60Watt. As per direction of EIC
170
4900
833000
... More
Supply, Installation, Testing & commissioning of bollard LED 3000K 230-240Vac 50-60Hz CRI 80 Input power: 8W Height 800mm, Electronic driver ON/OFF CE and RoHS compliance TYPE: Bollard, IP rating IP65, impact resistance IK10. MATERIAL CHARACTERISTICS : Extruded aluminium bottom pipe Ø100 x H800mm with polycarbonate diffuser and integral base plate Ø180 with PG gland. Luminaire contains built in LED modules. Operating ambient temperature range is from -20°C to +40°C. Lumen output 300 lm, light source 96 power LEDs. Resistance to heat and fore for plasticpart should be 850 degree celcius. Housing Color Dark grey RAL 7043. CCE, CE and RoHS compliance. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted. As per direction of EIC
30
10381
311430
... More
Supply, Installation, Testing & Commissioning of 6 Mtr High hot dip Galvanized Octagonal Pole with bottom 130mm A/F, top 70 mm A/F made up of 3 mm thick HT plate and 220x220x12 mm base plate and 1000 mm long single arm bracket complete with 4 Nos M20 x 700 mmlong " J type " foundation bolts, suitable RCC foundation etc as complete as required.. (Make- Havells-ECO POLE 4M TOP Ø 76 MM or equivalent)
79
15063
1189977
... More
FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)
-
-
-
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
-
-
-
... More
6 Zone
13
11780
153140
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system. 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.
11
47732
525052
... More
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
25
1058
26450
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
71
1141
81011
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
61
462
28182
... More
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
22
184
4048
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
41
545
22345
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
1790
141
252390
... More
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.
3
126399
379197
... More
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
3
81743
245229
... More
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
55
1780
97900
... More
Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.
3
145780
437340
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
-
-
-
... More
speaker cable Single pair, 2-core, 1.5 sqmm
825
51
42075
... More
DATA, TELEPHONE SYSTEM INCLUDING ACTIVE COMPONENTS
-
-
-
... More
Supply, Installation, Testing & Commissioning of Patch Panel Cat 6 U/FTP 24 Port- Loaded as per technical specification.
4
16128
64512
... More
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 3 feet as per technical specification.
10
445
4450
... More
Supply, Installation, Testing & Commissioning of Patch Cord Cat 6 U/FTP 7 feet as per technical specification.
28
1001
28028
... More
Supply, Installation, Testing, Commissioning of Cat 6, 10G, U/FTP, Information Outlet including G.I. Box and modular cover plate as per technical specification.
38
945
35910
... More
Supply , Installtion , Testing and comissioning of 12U wall mount rack with fans , 2 cable managers, satationary shelf , 2 Nos of hardware pkts as per technical specification.
4
6800
27200
... More
Supply, Installation, Testing & Commissioning of 24 port 10/100/1000Mbps, 4SFP module, L-2 Switch, POE as per technical specifications.
4
29000
116000
... More
Supply, Installation, Testing & Commissioning of IP Based voice Communication System with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility , 100 IP users License ,01 Nos. IP Operator Console, 30 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, - Redundant server in active-Active mode as per technical specification.
4
540000
2160000
... More
Supply, Installation, Testing & Commissioning of Type Basic Phone account , Full duplex speaker phone, .
10
1000
10000
... More
Supply, Installation, Testing & Commissioning of SFP+ 10GBASE-SR 10 Gigabit Ethernet Optics, 850 nm for up to 300 m,transmission on multimode fiber (MMF).
4
52833
211332
... More
Supply, Installation, Testing & Commissioning of 6 Core OM4 Multimode Fiber Cable as per technical specification.
80
334
26720
... More
Supply, Installation, Testing & Commissioning of 24 Port LC multimode loaded LIU.
16
12791
204656
... More
Supply, Installation, Testing & Commissioning of LC - LC Fiber patch cord OM4, 3 Mtrs.
8
15572
124576
... More
Supply, Installation, Testing & Commissioning of 6 Core, Single Mode, OS2 as complete as required.
80
278
22240
... More
IP CCTV SYSTEM
-
-
-
... More
Supply, Installation, Testing & Commissioning of 4MP IP Network TDN Low-Light IR Rugged Indoor Dome Camera, 1/2.8" CMOS or better, 4MP (2304 x 1296) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.005 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 50m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:88°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000) compliant
74
14500
1073000
... More
Supply, Installation, Testing & Commissioning of 4MP IP Network TDN Low-Light IR Rugged indoor/ outdoor Bullet Camera, 1/2.8" CMOS or better, 4MP (2304 x 1296) @ 25fps or better, triple stream at various resolution up to 25fps, Min. Illumination required 0.005 lux @ F1.6 (color), 0 Lux IR On, 4 IR LEDs Smart IR with upto 60m IR distance, Auto ICR (Infrared Cut Filter) 120dB True WDR, S/N Ratio 50db, Shutter Speed 1/8 - 1/30,000; Adavance Video Compression technology such as H.265 & H.264 High Profile & MJPEG , Triple stream, 2.7 to 13.5mm 5X motorized focus & zoom lens, Field of View FoV H:85°-24°, BLC, HLC, 3DNR White Balance, Minimum Edge Intelligence Video Analytics : Motion Detection, Tampering, 4 Privacy Mask, 8 Region Of Intreset, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 256GB SD card support, PoE (802.3 af) and 12V DC, Max 6W, IP 66/67, IK 10 vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S/G/T compliant, UL/CSA 62368-1, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000) compliant.
10
15000
150000
... More
Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light 2MP 40 X IP IR PTZ Camera, 1/2.8" CMOS, 2MP@ 50fps, H.265, H.264, Min. Illumination required 0.1 lux (color), 0 Lux B/W IR on, 120dB True WDR, HLC, BLC, triple stream, Lens wide 4 to 5mm - Tele 160 to 200mm, 40X motorized focus & zoom lens, Inbuilt/Externla IR uo to 200 Meters, Built in Video Analytics such as Video Motion Detection, Camera Tampering & Auto Tracking, 3DNR, Defog, Electronic Image Stabilization, 24 Privacy Mask, shutter speed 1/1 to 1/10,000 second, PAN Speed upto 400°/s, PAN Range 360° Endless, Tilt Speed upto 400°/s, Tilt Range -20° to +90° (Auto Flip ), 256 Presets, Dual channel Audio G.711a/G.711u/G726, 256GB SD card support, Alarm: 2 In, 1out, High-PoE (UPOE) and 24VAC, IP 66, IK 10 vandal proof, Inbuilt Heater, Operating temp range : –40°C to 60° C. Certifications: ONVIF Profile S & G compliant, UL, CE, EN, FCC, NDAA Section 889 & RoHS compliant.
10
205769
2057690
... More
Supply , Installation , Testing and commissioning of 64 Channel NVR (Network Vedio Recorder), for recording upto 64CH @ 1080P with 08 nos. SATA HDDs minimum 64TB storage or more (recording requirement all cameras recording at 4MP, 25fps for 30 days),H.265/H.264/MJPEG/MPEG4 codec decoding, Front Control Pannel with LEDs Indication, 3 nos. USB, iPhone; iPad; Android based Mobile clients, Video Export feature on USB, Search Mode: Time/Date; Alarm; Motion Detection (MD); Exact Search (accurate to a second); Smart Search, Dual HDMI Output, Alarm Input (16 nos.), Alarm Output (6 nos.), 16 POE Ports, eSATA Device, 320Mbps each Incoiming & Outgping throughput, Operating Temperature –10°C to 55°CCertification : CE, FCC & UL including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge
5
405977
2029885
... More
Supply, Installation, Testing and commissioning of Managable 24 port Switch with Power on Ethernet (PoE) enabled, 10/100, RJ45 Access ports with PoE complete as required.
21
30000
630000
... More
Supply, Installation, Testing and Commissioning of pecial Surveillance 6TB SATA HDD internal ( For Servers). etc. all complete.
5
27250
136250
... More
Supply, Installation, Testing and Commissioning of 55" LCD for Monitoring for each server etc. all complete.
5
72297
361485
... More
AUTOMATIC FIRE DETECTION GAS SUPPRESSION SYSTEM
-
-
-
... More
Supply, fixing, testing and commissioning of Automatic Linear pneumatic Tube Detection based FK 5-1-12 Pre-Engineered System for Electrical Panels (consisting of the following components.)
-
-
-
... More
4.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
6
25360
152160
... More
6.0 KG UL Listed Cylinder Automatic Pre-Engineered System filled with Clean Agent FK 5-1-12, Fitted with DLP Valve mounted on Cylinder Push-In-Connector for Tube, Mounting Bracket, End of Line Adopter and UL Listed Low Pressure Switch for Monitoring System Activation.
2
50386
100772
... More
UL Listed Linear Pneumatic Heat Detection Tube with all necessary fittings & supports, HR Grade,UV Protected, MultiLayered, Made of Special Modified Polyamide Material, Inner diameter 4mm, Outer Diameter 6MM, Operating Pressure 15 8Bar, Maximum Pressure 30 Bar at maximum Temperature of +65 Degree C, Pressurized.
500
1057
528500
... More
Master Control Unit with Audio Visual Alarm with wiring to make complete system operational. The Control Panel should have provision for integration with Fire Alarm/SCADA/BMS System (Supply to be provide by the end client at 220 Volt AC).
8
9454
75632
... More
UPS SYSTEM
-
-
-
... More
Supply, Installation, Testing & Commissioing of 5.0 KVA UPS in paralleling mode at 0.99 input power factor with SNMP card, compatible for BMS connectivity on backnet/MODBUS, Inbuilt Isolation transformer as per specification given in the document with following broad features.
-
-
-
... More
THD(i) shall be less than 3% in the entire loading range.
-
-
-
... More
UPS shall carry design output at 40 deg.
-
-
-
... More
Shall have soft start and hold of for incoming supply.
-
-
-
... More
Invertor capability to supply 150% load for 5 sec.
-
-
-
... More
Single Phase Input and Single Phase Output. (Input - 180V - 260V, Single Phase, 2 wire. / Output - 220-230 Volt, Single Phase, 2 Wire.)
-
-
-
... More
Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells.
-
-
-
... More
Battery shall be external type with rack and suitable for 90 minute backup on 100% load.
-
-
-
... More
Suitable size of copper cable between UPS and battery bank shall be provided
-
-
-
... More
UPS described as above
7
192000
1344000
... More
SUB- STATION AND PANELS WORK
-
-
-
... More
11 KV HT VCB THREE BREAKER PANEL BOARD (INDOOR TYPE)
-
-
-
... More
Supply, testing & commissioning of indoor type floor mounting, dust & vermin proof, front operated construction, enclosure class - IP- 52, powder coated after proper treatment with 9 tank process, 11 KV VCB panel with 3 nos VCB (1 incomer and 2 out goings), totally enclosed & fully interlocked, horizontal drawout, horizontal isolation type breaker as per IS : 13118, as ammended upto date and additional specifictions, having capacities as mentioned below, single break, trip free mechanism, motorised charged and auto closing breaker suitable for use on 11 KV, 3 Phase, 50 Hz A. C. supply with short circuit fault level of 18.3 KA, complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated but encapsulated Copper alloy bus bars for suitable fault level, Al earth bar, earth bar, breaker featured with mechanical ON / OFF indicator with hand trip device, spring release coil, shunt trip coil, control voltage of 24 Volt DC, TNC, LED type indicating lamps for phases and trip conditions and auxiliary switch of 6 NO + 6 NC and equipped with following switchgears and accessories.
-
-
-
... More
The panel should be suitable for connections for up to 3 x 240 sq.mm XLPE 11 KV cable (cable entry from bottom/top/side), end termination with heat shrinkable jointing material etc. as required. (The Cost of end termination not included in this item)
-
-
-
... More
All the Relay shall be of Numerical type, communicable with PLC through RS 485 port on Modbus and with built – in testing facilities
-
-
-
... More
power pack ( 1 working & 1 standby) with 220 Volt AC input & 24 Volt DC continuous output suitable for indicating lights & closing / tripping / indication of 3 Nos. HT panel boards with 2 Nos. 12 Volts each maintenance free batteries of 100 (suitable) AH each, charging unit, capacitor bank for emergency delivering for trip system complete with suitable capacity of Ammeter & Voltmeter i/c connections with 2.5 sq.mm FRLS insulated copper conductor cable etc. including DC DB consisting of 8 nos 32 Amp DP MCB's for DC supply distribution to panels as required.
-
-
-
... More
Incoming - 1 No. 630 Amp. VCB with followings in each breaker -
-
-
-
... More
(a) 1 set (3 nos) 11 KV / v3 / 110 / v3 Volts drawout / fixed type PT Class 0.5 accuracy and 100 VA burden with 1 No. Voltmeter (0-15 KV), digital type, selector switch for voltmeter and protection fuses/MCB for HT metering.
-
-
-
... More
(b) 3 nos. dual core dual ratio CTs of ratio 80/40/5/5A of 15 VA burden and accuracy class-0.5 for metering and class 5P10 for protection.
-
-
-
... More
(c) 1 No. - (0-80A) Ammeter, digital type with selector switches.
-
-
-
... More
(d) Master trip relay
-
-
-
... More
(e) Trip circuit supervision relay
-
-
-
... More
(f) Microprocessor based numerical relay with IDMT setting for O/L, E/F and S/C protection.
-
-
-
... More
(e) Restricted earth fault relay
-
-
-
... More
(g) Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, KVAH, KVARH, PF, HZ & MDI with RS 485 port.
-
-
-
... More
(h) Over and Under voltage relay.
-
-
-
... More
(i) Timer and TNC switch
-
-
-
... More
Outgoing - 2 Nos. - 630 A VCB with followings in each breaker -
-
-
-
... More
b) 1 No.- 11 KV / 110 Volt PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-12 KV), digital type, selector switch for voltmeter and protection MCB for HT Metering up to 12 KV on incommer.
-
-
-
... More
c) 1 No.- (0 - 40 A) dual scale Ammeter, digital type, selector switch for ammeters.
-
-
-
... More
d) 1 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.
-
-
-
... More
e) 1 No - set of dual core dual ratio 3 CTs 40/20//5A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.
-
-
-
... More
f) 1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories.
-
-
-
... More
g) 1 No. hooter with hooter acceptance and reset push button.
-
-
-
... More
h) 1 No - Red, Yellow & Blue for phase indication.
-
-
-
... More
i) 1 No - Amber for Trip indication.
-
-
-
... More
j) 1 No - Red `ON' Green `OFF'indication.
-
-
-
... More
k) 1 No - Spring charge indication.
-
-
-
... More
l) 1 No - Auto trip indication.
-
-
-
... More
m) 1 No. hooter with hooter acceptance and reset push button.
-
-
-
... More
n) 1 No. master trip relay. ( Electromechanical Type )
-
-
-
... More
o) 1 No.Trip ckt supervision relay. (Electromechanical Type )
-
-
-
... More
p) 2 No.auxiliary relay for transformer fault.
-
-
-
... More
H.T. Panel described as above
1
1500000
1500000
... More
500 KVA, 11KV/415V OIL TYPE TRANSFORMER
-
-
-
... More
Design, manufacture, supply, installation, testing and commissioning of 500 KVA, 11 KV /0.415 KV, 3 phase, 4.5 % impedance, 50 Hz delta/star-11 connected, outdoor type, copper wound transformer, oil immersed ONAN cooled, complete with all fittings such as oil conservator, silica gel breather, thermometer, explosion vent with on Load Tap changing (OLTC) arrangement on HV side with Tapping for variations of high voltage from (+) 5% to (-) 15% in steps of 1.25% each with integrated microprocessor based RTCC Panel, bi-directional roller, diagrams & rating plate, Oil temperature indicator, & Winding temperature indicator, Buchholz relay, weather proof Marshalling Box, lifting lugs, first filling of oil, weather proof H.T/L.T cable box etc. complete as per specification. All relays, contacts & CT terminals to be wired upto marshalling box. The Transformer losses should confirm to IS - 1180 Part-1 (2014) with energy efficiency level-1 as per amendment-4 [1.510 KW at 50% load & 4.300 KW at 100% load shall not exceeds by 5.0% (@ 11 KV) of the maximum total loss values.
2
2000000
4000000
... More
Main L.T. Panel
-
-
-
... More
supply, installation, testing and commissioning of Main L.T. Panel. The panel will be totally enclosed type with, free standing, floor mounted, indoor duty, dust & vermin proof, compartmentlized, front operated, electrical panel fabricated from 14 SWG CRCA steel sheet class - IP -52, as per specifications & drawing laid in this document and will be complete with the main and auxiliary bus bars, ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indication lamps, CT's, protection MCB, interconnection wiring, earth bus and will be powder coated finish with 70 micron thickness. All the busbar joint shall be protected by clip on type sleeve. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have changeover facility & interlocking through PLC to achieve electrical interlocking, buscoupler switching, auto operation of incommer and bus coupler etc and having following incomming and outgoing Air Circuit Breakers, MCCB as per the drawing and specification.
-
-
-
... More
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt microprocesor based Over load protection (L), Short Circuit protection (S), Instantaneous Short Circuit protection (I), Earth Fault protection (G), Shunt Trip releases. All ACB should have Ics=Icu=Icw=50 KA for 1 sec, fully rated at 50 deg C ambient temperature & shall be supplied with adopter terminal connection whose orientation can be changed at site. All ACB shall be supplied with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
... More
All Incoming / bus coupler / Outgoings ACB's shall have inbuilt current, volatage metering, ZSI (for discrimination) with trip history. All four pole ACB's shall have neutral protection at 50% and 100% . All ACB Shall have common frame till 3200 Amp.
-
-
-
... More
All incoming & outgoing MCCB's shall be microprocessor based with O/L & S/C and E/F protection with inbuilt trip history (Faulty phase, type of fault and interupted Current).
-
-
-
... More
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement. All TP MCCB shall be with heavy duty solid isolable neutral link. All four pole MCCB's shall have neutral protection at 50% and 100%. All MCCB shall be Single Fram till 250A.
-
-
-
... More
The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, cast resin type CT's & PT's, etc. Separate CT's shall be provided for protective and measuring system and for APFCR of capacitor bank with suitable VA.
-
-
-
... More
Each section of Panel shall have door opearted light of sufficent lux to illumunate that section & each section of capacitor, buscoupler, transformer and DG incomers shall have exhaust fans for ventilation purpose.
-
-
-
... More
All Energy Analyser / TVM Shall have RS 485 Modbus RTU on board Communication protocol for SCADA communication.
-
-
-
... More
The fault withstanding capacity of panel & its control gear shall be min. 25 KA rms for 1 sec.
-
-
-
... More
INCOMERS from 2 Nos. 500 KVA Transformers
-
-
-
... More
1 nos. 800 AMP. Four Pole, Electrically operated 3 position motorized (220 V AC) drawout type Air Circuit Breaker with all inbuilt protections, with microprocessor based release, over current, earth fault, short circuit, Instantaneous short circuit, closing coil (220 V AC), trip coil (24 V DC), shunt trip release, inbuilt U/V release with LCD / LED display for event history & measurement of current parameters, 50 KA Breaking Capaciy with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:60947
-
-
-
... More
The ACB shall be electrically interlocked with the bus coupler, DG incomers and other transformer incomers.
-
-
-
... More
1 nos. 32 amp TP MCCB (25 KA) for OLTC (for each transformer incomer)
-
-
-
... More
1 nos. 15 KVAR capacitor bank with 63 amp TP MCCB (25 KA) for each transformer incomer.
-
-
-
... More
Protection releases / relays, Metering & Accessories for each Transformer incomers
-
-
-
... More
Surge Protection Device - Type - 01 (Class - B), 10/350 µ sec. (100 / 25KA)
-
-
-
... More
Over Voltage / Under Voltage relay / release (3 phase) with timer.
-
-
-
... More
Master trip relay.
-
-
-
... More
Trip Circuit Supervison relay.
-
-
-
... More
TNC switch.
-
-
-
... More
Auto manual selector switch.
-
-
-
... More
1 nos. 0-500 volt range digital type voltmeter with selector switch
-
-
-
... More
1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden for metering.
-
-
-
... More
1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden for APFCR.
-
-
-
... More
1 set - 415 / √3 / 110 / √3 Class 1.0 accuracy 100 VA burden PT along with primary and secondary fuse.
-
-
-
... More
1 set of 4 CT's of ratio 800/1A, Class PS for protection.
-
-
-
... More
1 no. CT's of ratio 800/5A, Class 5P10 for protection.
-
-
-
... More
1 no. 0-800 Amp range digital type ammeter with selector switch.
-
-
-
... More
Energy analyser (digital type) consisting of I, V, KW, KWH, KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485 communication port for communication / report generation. (or Dual meter)
-
-
-
... More
3 Nos. LED type phase indicating lamps, each lamp shall be with bakup MCB along with hooter, auxillary relay, 2 sets of push buttons.
-
-
-
... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup MCB.
-
-
-
... More
BUSCOUPLER
-
-
-
... More
1 no 800 AMP Four Pole, Electrically operated 3 position motorised (220V AC) drawout type ACB's, closing coil (220V AC), trip coil (24V DC), with 50 KA Breaking Capacity with all standard accessories i.e. auxillary switch with 4NO + 4NC contacts, cradle, handle, safety shutter in confirmity with IS:13947-2.
-
-
-
... More
Protection releases / relays, Metering & Accessories for Bus Coupler (s)
-
-
-
... More
Trip circuit supervision relay
-
-
-
... More
TNC switch.
-
-
-
... More
Auto / manual selector switch
-
-
-
... More
5 Nos. LED type indicating lamp for indicating the status of feeder - ON / OFF / TRIP / Trip circuit healthy / DC supply healthy. Each lamp shall be with bakup HRC fuse/MCB.
-
-
-
... More
The bus coupler shall be electrically interlocked with all incoming ACB's in such a way that at any one time two supply should not get mixed up.
-
-
-
... More
BUSBARS
-
-
-
... More
800 Amp TPN busbars of aluminium alloy as per SLD.
-
-
-
... More
OUTGOING
-
-
-
... More
All outgoing feeder shall be provide with ON / OFF / Trip indication lamp with protection MCB's, Dual Source energy Meter.
-
-
-
... More
06 Nos 400A TP MCCB (25 KA)
-
-
-
... More
03 No 250A TP MCCB (25 KA)
-
-
-
... More
03 No 160A TP MCCB (25 KA)
-
-
-
... More
04 No 100A TP MCCB (25 KA)
-
-
-
... More
03 No 63A TP MCCB (25 KA)
-
-
-
... More
Main L.T. Panel Described as Above.
1
2400000
2400000
... More
AUTOMATIC POWER FACTOR CORRECTION PANEL (CAPACITOR PANEL)
-
-
-
... More
supply, installation, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type 200 KVAR A P F C Panel consisting of 5 /10 / 25 / KVAR (at 415 Volts rated voltage of bank shall be 480 Volts) capacitor units in tier formation, housed in an integrated cubicle type automatic switching ON and OFF control panel, floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 4x, powder coated after proper treatment with 9 tank process with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors to achieve dust and vermin proof complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels etc. The Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 .
-
-
-
... More
The Panel shall have a provision for AUTOMATIC FIRE DETECTION GAS SUPPRESSION flooding system for complete panel of each compartment / section including gas bank of required capacity (Note - Gas Supression flooding sysytem having seperate item).
-
-
-
... More
All out going MCCB's shall be thermal-magnetic based with inbuilt O/L & S/C release.
-
-
-
... More
All MCCB's shall be Ics = 100% Icu, with rotary handle & pad locking arrangement, with adjustable O/L & S/C trip setting as per load requirement. All TP MCCB shall be with heavy duty solid isolable neutral link. The breaking capacity specified is Ics value. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc.
-
-
-
... More
AC3 duty contactors should be used for switching individual capacitor banks.
-
-
-
... More
The fault withstanding capacity of panel & its control gear shall be min. 25 KA rms for 1 sec.
-
-
-
... More
Each section of capacitor panel shall have Verticle hood & exhaust fans for ventilation purpose.
-
-
-
... More
INCOMING
-
-
-
... More
Incomer circuit breaker has been included in the main panel.
-
-
-
... More
1 set- 3 CTs , ratio 400 / 5A Class 1.0 accuracy 15 VA burden for metering.
-
-
-
... More
1Nos- (400 A) digital Ammeter with selector switch
-
-
-
... More
Micro processor based automatic power factor control relay (3 phase) (including power factor meter) in 11 steps for automatic cut off or add on capacitor units to keep the power factor at 0.95 with variation of loads. All associated auxiliary contactors / relays shall be provided with in the scope of work.
-
-
-
... More
Phase indicating lamps with HRC fuses, and indicating in each capacitor chamber unit to indicate On/Off status of capacitor unit.
-
-
-
... More
BUS BARS
-
-
-
... More
400 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity electrolytic Aluminium bus bar of suitable length, SMC / DMC supports, with colour coding and insulated by heat shrinkable sleeves and clips on shrouds for joints.
-
-
-
... More
OUTGOINGS
-
-
-
... More
7 nos. of 63 AMPS TPN MCCB (25 KA) and 80 amps AC3 duty contactor with 25 KVAR, MPP resin filled, super heavy duty ,480 V capacitor bank, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
... More
2 nos. of 32 AMPS TPN MCCB (25 KA) and 40 amps AC3 duty contactor with 10 KVAR, MPP resin filled, super heavy duty ,480 V capacitor bank, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
... More
1 no. of 16 AMPS TPN MCCB (25 KA) and 20 amps AC3 duty contactor with 5 KVAR, MPP resin filled, super heavy duty ,480 V capacitor bank, auto-manual selector switch, start stop push button for manual operation including on/off indicating lamps and delay timer complete.
-
-
-
... More
Capacitor Panel as described above
2
400000
800000
... More
DISTRIBUTION PANEL
-
-
-
... More
Design, Manufacturing, Supply, installation, Testing & Commissioning of Outdoor Type Panel with Front & Back double door, Top canopy, Mounting on Floor M.S. Stand etc totally enclosed free standing type made out of 2.0 mm thick & front cover 1.6 mm thick CRCA sheet complete with following equipments, including digital ammeter with inbuilt ammeter selector switch, digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires / cable, interconnection, painting complete as per specification & drawing. All the incomming and outgoing MCCB shall have 25 KA Ics.The incoming MCCB shall be microprocessor based with O/L & S/C and E/F protection and all Outgoings up to 250A MCCB's may be thermo-magnetic based O/L & S/C protection. All outgoing MCB's shall be C type with 10 KA breaking capacity.
-
-
-
... More
ELECTRICAL PANEL-01 ( OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 Nos. 250 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
02 Nos. 160 Amp FP MCCB (25 KA)
-
-
-
... More
03 Nos. 100 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
07 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
195000
195000
... More
ELECTRICAL PANEL-02 ( OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 Nos. 250 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
250 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
01 Nos. 200 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 100 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
10 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
205000
205000
... More
ELECTRICAL PANEL- 03 ( OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 160 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
02 Nos. 100 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
08 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
165000
165000
... More
ELECTRICAL PANEL- 04 ( OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 400 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
400 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
06 Nos. 100 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
06 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
235000
235000
... More
ELECTRICAL PANEL- 05 ( OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 400 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
400 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
01 Nos. 200 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 100 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 63 Amp FP MCB (10 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
05 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
355000
355000
... More
ELECTRICAL PANEL- 06 ( OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 160 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
02 Nos. 100 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
05 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
215000
215000
... More
ELECTRICAL PANEL- 07 (OUT DOOR TYPE)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 160 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
02 Nos. 63 Amp FP MCCB (25 KA)
-
-
-
... More
02 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
18 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
185000
185000
... More
ELECTRICAL PANEL- 08 ( HOSPITAL BLOCK)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 100 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
02 Nos. 40 Amp FP RCCB (300 mA)
-
-
-
... More
03 Nos. 25 Amp FP MCB (10 KA)
-
-
-
... More
03 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
02 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
229631
229631
... More
ELECTRICAL PANEL- 09 ( ADMIN BLOCK)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 200 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
04 Nos. 63 Amp FP RCCB (300 mA)
-
-
-
... More
03 Nos. 25 Amp FP MCB (10 KA)
-
-
-
... More
03 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
02 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
205000
205000
... More
ELECTRICAL PANEL- 10 (FEMALE PRISONERS BLOCK)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 100 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
02 Nos. 63 Amp FP RCCB (300 mA)
-
-
-
... More
03 Nos. 25 Amp FP MCB (10 KA)
-
-
-
... More
03 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
02 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
1
215000
215000
... More
ELECTRICAL PANEL- 11 (BALANCE 17 NOS BLOCK)
-
-
-
... More
INCOMING
-
-
-
... More
1 No. 100 Amp FP MCCB (25 KA)
-
-
-
... More
1 No.AVF Meter with inbuilt selector switch.
-
-
-
... More
1 Set of phase indicating lamps with Single Pole MCB.
-
-
-
... More
1 Set of ON / OFF indicating lamps with Single Pole MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
200 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
03 Nos. 25 Amp FP MCB (10 KA)
-
-
-
... More
03 Nos. 40 Amp FP MCB (10 KA)
-
-
-
... More
03 Nos. 63 Amp FP MCB (10 KA)
-
-
-
... More
02 Nos. 63 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
17
175000
2975000
... More
EXTERNAL LIGHTING PANEL (OUTDOOR TYPE)
-
-
-
... More
Design, Manufacturing, Supply, installation, Testing & Commissioning of Outdoor Type Panel with Front & Back double door, Top canopy, Mounting on Floor M.S. Stand etc totally enclosed free standing type water, moisture, dust and vermin proof Sub Distribution Board made out of 2.0 mm thick CRCA sheet complete with following equipments, including ammeter, ammeter selector switch, voltmeter, voltmeter selector switch, indicating lamps, CT's, internal wiring with suitable size wires/ cable, interconnection, painting etc as required.
-
-
-
... More
INCOMING
-
-
-
... More
1 No 63 Amp FP Moulded Case Circuit Breaker (25 KA) with 63 Amp 4 Pole Contactor & Timer.
-
-
-
... More
1 No. Digital AVF Meter with inbuilt selector switch and CT' & SP MCB.
-
-
-
... More
1 Set of phase indicating lamps.
-
-
-
... More
1 Set of ON/OFF indicating lamps with SP MCB.
-
-
-
... More
BUS BARS
-
-
-
... More
100 Amp FP aluminium busbar with coloured heat shrinkable sleeve.
-
-
-
... More
OUTGOING
-
-
-
... More
15 Nos. 25 Amp DP MCB (10 KA)
-
-
-
... More
04 Nos. 40 Amp DP MCB (10 KA)
-
-
-
... More
Panel described as above
3
121871
365613
... More
BOOM BARRIERS
-
-
-
... More
Supplying installation testing and commissioning of Automatic boom barrier, the Barrier Front Design Round, Parki Electromechanical Drive Mechanism, 4 meters boom arm, Illuminated Boom Arm (Red/Green), Opening Speed : 1.5 Sec, Reverse on Obstable Detection, Housys intelligent control mechanism, Automatic Fault Detection, Arrow Led Indication on barrier body (Red/Green), Duty Cycle 100 % , IP Rating : IP 66, RS 485 Communication etc. as required.
2
79537
159074
... More
Providing and fixing of 1.5 ton A.C complete job 30 Nos@70000/each
20
70000
1400000
... More
SUB HEAD - 1 : SANITARY FIXTURES
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever requiredWhite Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
243
5781
1404868.05
... More
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.
8
14999
119993.2
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
8
18212
145703.2
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
45
2648
119198.25
... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
149
1879
280000.8
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
6
7979
47875.2
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade as per Architect.
2
4051
8103.7
... More
Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms
24
636
15271.2
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
224
1034
231795.2
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve forbasin mixer and geyser points of approved make conforming to IS : 8931
1106
536
592926.6
... More
Providing and fixing toilet paper holder including cutting and making good the walls wherever required & make and as per the direction of Engineering- charge.C.P. brass
251
803
201728.7
... More
Providing and fixing Health faucet with 1 metre long Flexible Tube and CP wall hook with PVC & SS Screws including cutting and making good the wall wherever required complete as directed by the Engineer-in-charge.
251
1453
364703
... More
Providing and Fixing straight / offset type flexible single body push fit type WC pan connector with inlet ring and integral single mould sealing fins made of flexible EVA body to be fixed with manufacture supplied grease, including rubber bush / adaptor for use with C.I pipe as supplied with the pan connector complete as directed by Engineer-in-charge.
251
1446
362946
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
197
1607
316766.15
... More
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
194
227
44212.6
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm
24
6008
144202.8
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm diameter
157
222
34908.95
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia
157
6940
1089697.75
... More
Providing and Fixing central hole C.P. brass Sink Mixer including cutting and making good the walls wherever required complete in all respects as per direction of the Engineer-in-charge
24
4509
108216
... More
Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.
(i) Single socketed pipes110 mm diametre
411
354
145822.8
... More
Providing and fixing soil, waste and vent pipes : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
-
-
-
... More
100 mm dia.
1253
1169
1465132.9
... More
75 mm dia.
30
964
28927.5
... More
Providing and fixing bend of required degree with access door, insertionrubber washer 3 mm thick, bolts and nuts complete. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
-
-
-
... More
100 mm dia.
200
567
113440
... More
75 mm dia.
10
418
4189.5
... More
Providing and fixing plain bend of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
-
-
-
... More
100 mm dia.
60
368
22080
... More
75 mm dia.
10
252
2525
... More
Providing and fixing double equal plain junction of required degree. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
-
-
-
... More
100x100x100x100 mm
30
760
22821
... More
75x75x75x75 mm
5
418
2094.75
... More
Providing and fixing terminal guard :
Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
-
-
-
... More
100 mm dia.
100
427
42780
... More
75 mm dia.
5
380
1900
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:
-
-
-
... More
50 mm dia. nominal bore (Medium Class)
220
879
193435
... More
40 mm dia. nominal bore (Medium Class)
29
669
19406.8
... More
32 mm dia, nominal bore (Medium Class)
850
562
477827.5
... More
Painting centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint off any colour such as chocolate, grey, or buff etc. over a coat of primer (of approved quality) for new work:
-
-
-
... More
100 mm dia.
970
82
80316
... More
75 mm dia.
30
62
1888.5
... More
Painting G.I. Pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality.
-
-
-
... More
50 mm dia. nominal bore
220
23
5170
... More
40 mm dia. nominal bore
29
19
568.4
... More
32 mm dia. nominal bore
850
17
14620
... More
Providing and fixing trap of self cleansing design with screwed downor hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905
151
854
129037.05
... More
Providing & laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm and down gauge) 75mm in bed and pipe. For 150, 100mm, 75mm and 50mm dia pipes under floor including cantering & shuttering wherever required.
1470
1100
1617000
... More
Providing & fixing GI Floor Drain of approved design including setting in floor with cement mortar.
144
348
50112
... More
Providing & fixing 1 mm thick stainless steel grating with rim of approved design including setting in floor with cement mortar. (For Floor Drain125 mm dia
295
378
111510
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
71
247
17558.3
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing
-
-
-
... More
15 mm nominal outer dia Pipes
95
234
22244.25
... More
20 mm nominal outer dia Pipes
580
290
168287
... More
25 mm nominal outer dia Pipes
475
354
168387.5
... More
32 mm nominal outer dia Pipes
305
472
144005.75
... More
40 mm nominal outer dia Pipes
30
645
19375.5
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
-
-
-
... More
15 mm nominal outer dia Pipes
1110
388
431290.5
... More
20 mm nominal outer dia Pipes
885
444
393559.5
... More
25 mm nominal outer dia Pipes
695
531
369288.25
... More
32 mm nominal outer dia Pipes
135
660
89120.25
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Exposed on wall
-
-
-
... More
20 mm dia, nominal bore (Medium Class)
240
360
86604
... More
25 mm dia, nominal bore(Medium Class)
440
469
206712
... More
32 mm dia, nominal bore (Medium Class)
400
562
224860
... More
40 mm dia, nominal bore (Medium Class)
50
669
33460
... More
Painting G.I. pipes and fittings with synthetic enamel white paint withtwo coats over a ready mixed priming coat, both of approved quality for new work.
-
-
-
... More
20 mm dia, nominal bore
240
18
4524
... More
25 mm dia, nominal bore
440
24
10868
... More
32 mm dia, nominal bore
400
29
11780
... More
40 mm dia, nominal bore
50
34
1737.5
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
-
-
-
... More
15 mm dia
4
438
1755.4
... More
20 mm dia
46
483
22222.6
... More
25 mm dia
48
526
25250.4
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
... More
32 mm nominal bore
26
617
16062.8
... More
50 mm nominal bore
6
942
5656.5
... More
Providing & fixing Auto Air vent for cold water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.
-
-
-
... More
15 mm nominal bore
67
662
44354
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
40000
11
450000
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end)
-
-
-
... More
25 mm nominal bore (Horizontal)
25
538
13468.75
... More
32 mm nominal bore (Horizontal)
30
680
20416.5
... More
40 mm nominal bore (Horizontal)
10
830
8303
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main
-
-
-
... More
25 mm nominal bore
2
457
915.6
... More
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately)
-
-
-
... More
80 mm dia. nominal bore
1
3559
3559
... More
SUB HEAD - 4 : EXTERNAL SEWERAGE AND DRAINAGE SYSTEM
-
-
-
... More
Providing and laying High density Polythene (HDPE Pipes) material grade PE-80, working pressure rating PN 4 (0.4 maximum permissible working pressure) confirming IS - 14333 jointed by Butt welding method including testing of joints etc. complete
-
-
-
... More
160 mm OD
300
1016
304800
... More
225 mm OD
800
2095
1676000
... More
250 mm OD
550
2582
1420100
... More
300 mm OD
250
3030
757500
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand:10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design.
20.2.2 Upto haunches
-
-
-
... More
150 mm diameter pipe
300
459
137790
... More
200 mm diameter pipe
800
539
431920
... More
250 mm diameter pipe
550
628
345702.5
... More
300 mm diameter pipe
250
725
181312.5
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete
-
-
-
... More
250 mm dia. R.C.C. pipe
850
730
621180
... More
300 mm dia. R.C.C. pipe
550
840
462137.5
... More
450 mm dia. R.C.C. pipe
200
1348
269790
... More
500 mm dia. R.C.C. pipe
100
1612
161255
... More
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50 m. All Kinds of Soil Pipes, cables etc., exceeding 80mm dia but not exceeding 300mm dia
2900
352
1021235
... More
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50 m. All Kinds of Soil Pipes, cables etc., exceeding 300mm dia but not exceeding 600mm dia
900
549
494775
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
50
10971
548570
... More
20.7.4 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
40
27344
1093766
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 20.9.10.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
20.9.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
35
10129
354544.75
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 19.9A.1 1.68 m deep with SFRC Cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
19606
196064.5
... More
Extra for depth for manholes
Size 90x80 cm
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
55
7604
418272.25
... More
Extra for depth for manholes
Size 120x90 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
9115
136727.25
... More
Extra depth for circular type manholes Manhole 0.91m internal dia (at bottom) beyond 0.91 m to1.67 m
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
13
6520
84764.55
... More
Extra depth for circular type manholes Manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
8476
50860.2
... More
Providing and fixing square- mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design.
20.3.1) 100 x 100 mm size P type
20.3.1.1) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
55
2193
120648
... More
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design:Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.
30
4988
149668.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc.
(external work)
-
-
-
... More
25 mm dia nominal bore (Medium Duty)
120
298
35778
... More
32 mm dia nominal bore (Medium Duty)
250
360
90225
... More
40 mm dia nominal bore (Medium Duty)
200
418
83760
... More
50 mm dia nominal bore (Medium Duty)
300
559
167805
... More
65 mm dia nominal bore (Medium Duty)
200
711
142340
... More
Providing and filling sand of coarser grade around the G.I. pipes in external work.
-
-
-
... More
25 mm dia nominal bore
120
58
7056
... More
32 mm dia nominal bore
250
60
15075
... More
40 mm dia nominal bore
200
61
12220
... More
50 mm dia nominal bore
300
63
19005
... More
65 mm dia nominal bore
200
100
20000
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)
-
-
-
... More
25 mm dia nominal bore
20
355
7117
... More
32 mm dia nominal bore
50
409
20467.5
... More
40 mm dia nominal bore
40
492
19692
... More
50 mm dia nominal bore
55
648
35645.5
... More
65 mm dia nominal bore
40
886
35450
... More
SUB HEAD - 6 : SEWAGE TREATMENT PLANT (MBR TECHNOLOGY)
-
-
-
... More
Design, Supplying, installing, testing & commissioning of Sewage Treatment Plant of 75 KLD (excluding excavation, back filling & disposal of surplus earth MS / Civil construction work) for the following duty:B335
1
2500000
2500000
... More
Sewage treatment plant shall include the following items:
-
-
-
... More
Conventional MBBR STP Technology Primary Treatment – -Manual Bar Screen -Oil, Grease Trap and Grit Removal System
Secondary Treatment – -Raw Sewage
Transfer Pump (01set) Air Blower (01set) and Diffuser System - Media -Tube Media/Lamella -Chlorine Dosing system with Chlorine Dosing Pump(01set) -Sump Pump (01set) -Plant/Interconnecting Piping And Valves -Manual/PLC Based Electrical Control Panel -Incoming/Outgoing Feeder -Cable Laying With Cable Tray -Earthing Systems -Pressure Gauges -Level Switches -Online Rota meter -Air Rota meter -Flow Meter -Filter Feed Pump (01set) -Multi Grade Sand Filter -Activated Carbon Filter -Micro Filtration system Sludge Handling System – -Sludge Recycling Pump (01set) -Sludge Feed Screw Pumps (01set) -Filter Press System
-
-
-
... More
INLET SEWAGE CHARACTERSTICS (ASSUMED)
-
-
-
... More
pH - 6.0 – 8.5
-
-
-
... More
BOD - Less than 150 Mg/L
-
-
-
... More
S. Solids - Less than or equal to 100 Mg/L
-
-
-
... More
COD - Less than or equal to 300 Mg/L
-
-
-
... More
Oil & Grease - Less than 5 Mg/L
-
-
-
... More
Desired Sewage Quality After Treatment
-
-
-
... More
pH - 6.5 – 8.5
-
-
-
... More
BOD - Less than 5 Mg/L
-
-
-
... More
S. Solids - Less than or equal to 5 Mg/L
-
-
-
... More
COD - Less than or equal to 10 Mg/L
-
-
-
... More
Oil & Grease - NIL
-
-
-
... More
Expected Treated Water Characteristics after filtration and Softner(for HVAC Cooling Tower Makeup)
-
-
-
... More
pH - 6.0 – 7.0
-
-
-
... More
Total D. Solids - Less than 200 ppm
-
-
-
... More
Total S. Solids - Less than 1 Mg/L
-
-
-
... More
Turbidity - NIL
-
-
-
... More
Total Hardness - Less Than 50ppm
-
-
-
... More
Note:
-
-
-
... More
Vendor shall ensure submission of detailed GA drawings (Plan & Section), P&I diagram, schematic diagram for the above said component and additional component if so required for the complete working of the STP for the full capacity.
-
-
-
... More
WET RISER SYSTEM - PUMPING EQUIPMENTS
-
-
-
... More
Main Fire Pump
-
-
-
... More
(A) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required :
(B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(E) Suitable cement concrete foundation duly plastered with anti vibration pads.
-
-
-
... More
Capacity : 2280 LPM
Pump Head: 70 M
App. HP : 60 HP
1
369064
369064
... More
Diesel Engine Driven Main Fire Pump
-
-
-
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)
a) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.
c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
... More
Capacity : 2280 LPM
Pump Head: 70 M
1
612065
612065
... More
Jockey Pump
-
-
-
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)
a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.
c) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
-
-
-
... More
Capacity : 180 LPM
Pump Head: 70 M
1
103304
103304
... More
CONTROL PANELS
-
-
-
... More
Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :
-
-
-
... More
INCOMING
-
-
-
... More
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating
Digital Voltmeter 0-500V with selector switch
Digital Ammeter (0-250 A) with selector swtich & CTs etc.
-
-
-
... More
LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps
-
-
-
... More
Set of Copper Bus Bar 300A
-
-
-
... More
OUTGOING
-
-
-
... More
(Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
-
-
-
... More
Main Fire Pump
-
-
-
... More
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
-
-
-
... More
Jockey Pump
-
-
-
... More
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
-
-
-
... More
DIESEL ENGINE CONTROL
-
-
-
... More
Control for diesel engine comprising -
-
-
-
... More
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode
-
-
-
... More
Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication
-
-
-
... More
Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter
-
-
-
... More
All standard relays and accessories for automatic operation of diesel engine
-
-
-
... More
System Controller
-
-
-
... More
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification
1
245730
245730
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
18244
18244
... More
Supply, Installation, testing and commissioning of pressure switches for Hydrant / Diesel Engine Driven Pump / Jockey Pumps, diaphragm type, adjustable range from 0-9 bar and a regulation range of 0.1 - 1.5 bar direct mounted SNAP acting type made from die cast aluminium with epoxy powder coated finish and SS316 diaphragm and other wetted parts, including necessary wiring upto control panel & other materials as required as per specifications.
3
1546
4638
... More
INTERNAL & EXTERNAL HYDRANT SYSTEM
-
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
-
-
-
... More
200 mm dia. ( Wall thickness 6.3 mm)
10
5463
54630
... More
150 mm dia
250
3574
893500
... More
100 mm dia
95
2555
242725
... More
80 mm dia
120
1885
226200
... More
25 mm dia
55
744
40920
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.
-
-
-
... More
150 mm dia
1180
3804
4488720
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
-
-
-
... More
150 mm dia
4
8960
35840
... More
80 mm dia
72
4982
358704
... More
50 mm dia
2
3784
7568
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :
-
-
-
... More
150 mm dia
3
17786
53358
... More
80 mm dia
1
7691
7691
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
10
1321
13210
... More
Providing and fixing of dial type (150 mm) pressure gauge with isolation ball valve suitable for working pressure of 250 PSI with no Syphon. Cost shall be inclusive of providing any short pieces, nipples, elbows etc. as required.
15
1800
27000
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
-
-
-
... More
150 mm dia
2
11144
22288
... More
Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.
43
789
33927
... More
Providing and fixing weather proof lockable cabinet of size not less than 750 x 600 x 250 mm made out of Mild Steel sheet of 2 mm thickness having central opening and 4 mm thick glazed glass doors (Two No.) suitably marked on the outside with the letters "FIRE HOSE" including necessary locking arrangement and shall be painted with one coat of primer and two coats of stove enamel paint of approved shade. (The aesthetics and design of the cabinet shall be as per the architect / Client). (For External Hydrant).
27
6183
166941
... More
Providing & fixing single acting Air release valve with brass gate valve, flanges/ union, suitable for wet riser system with all necessary connections complete with all accessories as required and conforming to IS : 12992 (Part 1).
22
1481
32582
... More
100 mm dia. Stainless Steel fire brigade draw out collecting head with 63 mm diameter instantaneous male draw out arranged at a suitable point at street level. This draw out shall be connected to galvanized iron pipe of 100 mm diameter with foot valve arrangement in the tank for Fire Brigade.
2
14674
29348
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single Headed Stainless Steel
70
6139
429730
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304)
140
4448
622720
... More
Supplying & fixing 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304)
70
1662
116340
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. a) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585
b) 20 mm nominal internal dia gun metal globe valve & nozzle.
c) Drum and brackets for fixing the equipmets on wall.
d) Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket 30 Meter length
43
8675
373025
... More
Supplying, installation, testing and commissioning of M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mm x 40mmx6mm complete with glass, locking arrangements to accommodate all acessories.
The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade.
43
16860
724980
... More
4 waySupplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
2
13974
27948
... More
Constructing masonry Chamber 1200 x 1200 x 2000 mm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Gate valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
(For External Hydrant system).
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
1
33860
33860
... More
FIRE EXTINGUISHERS
-
-
-
... More
Note :
-
-
-
... More
All Fire Extinguisher shall be HCFC, CFC and Halons free.
-
-
-
... More
The Fire Extinguisher Manufacturer/Supplier shall provide declaration, Technical Data Sheet/cut sheet of All type of Fire extinguisher to be installed.
-
-
-
... More
Providing and fixing Carbon-di-oxide fire extinguishers consisting of welded M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube, ISI marked high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS : 15683 and amended upto date finished externally with red enamel paint and fixed to wall with brackets with rawl plug/dash fasteners complete with internal charge with CO2 gas conforming to IS : 307-1996..
-
-
-
... More
Capacity 4.5 kg. I.S.I. Marked. (IS : 15683 : 2006 and amended upto date)
44
13313
585772
... More
Providing and fixing ABC stored pressure dry chemical powder Fire Extinguisher IS : 15683 and amended upto date latest revision manufacturer and of CRCA sheet in welded construction, finish with High quality epoxy polyester powder coated complete with brass forged ball valve, gun metal cap and nozzle, including initial filled and wall suspension bracket (suitable for fighting in class 'A', B & 'C' that is wood, textile, flammable liquid, electric and gases).
-
-
-
... More
Capacity 6 Kg (IS : 15683 : 2006 and amended upto date)
86
7717
663662
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%