National Bank For Agriculture And Rural Development Tender

Demolishing cement concrete manually/by mechanical means including disposal of material beyond municipal limits as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalentdesign mix)

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material beyond municipal limits as per direction of Engineer-in-charge In cement mortar

Dismantling 15 to 20 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge

Dismantling doors including chowkhats, architrave, holdfasts etc. of area of 3 sqm. and below complete and stacking within 50 meters lead.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground outside municipal limits With cement mortar 1:4 (1 cement : 4 fine sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure up to floor v level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand

Dismantling tile work in floors and walls, wherever required, laid in cement mortar including disposal of malwa beyond municipal limits. Providing and laying vitrified floor tiles in 600x600 mm with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. and skirting till 150 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size in dado upto ceiling level over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid

Supplying and fixing best approved best quality SS Health Facet with Stop cork of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications (make parryware/hindware/equivalent)

Providing and fixing CPVC inlet connection for flush pipe connecting with W.C. pan

Providing and fixing 100 mm sand cast iron grating for gully trap

Providing and fixing CP Brass wall mixer of quality & make

Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 32 mm dia flexible pipe

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 100 mm sand cast iron grating for gully trap

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing factory made singly extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows and other frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gm) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) and 1100 N (edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite proof, mositure/waterproof and fire retardant and fixed in position with MS hold fast/lugs/SS - fasteners of required dia and length complete as per direction of engineer-incharge Frame size 50 x 100 mm

Providing and fixing factory made singly extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gm) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) and 900 N (edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite proof, mositure/waterproof and fire retardant and fixeing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of engineer-incharge 30 mm thick