Municipal Corporation Tender

Supply,Installation,Testing and commissiong of (including dismantling of damaged)

Drivers for LED Strips (ELTECKS/Victoria make) functional within SMC Limits along with one year replacement warranty

Supply,Installation,Testing and commissiong of (including dismantling of damaged)

11 kV Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11KV Link Set

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

Fabricated GI Channel as per design for use in HT Lines/Sub-stations

Supply of Energy Meters

Single Phase Energy Meter 5-30 Amp DLMS Compliant of accuracy class 1.0

Three Phase Energy Meter Accuracy Class-1 (20-80Amps)

Servicing of Air Conditioners

Wet Servicing of AC's

Gas filling of AC's

Supply and fixing of Relays (Coil Voltage : 220VAC,110 VAC, 24VAC/DC,Current Rating : 5-20 A)

Supply and fixing of mother board (LG/Daiken/Mitsubishi/other standard brands)

Supply of Electrical items for Maintenance & upkeep of Electrification of various Assets of SMC

1mm.sq CU wire Standard make FR

1.5 mm.sq CU wire Standard make FR

2.5mm.sq CU wire Standard make FR

4mm.sq CU wire Standard make FR

10mm.sq CU wire Standard make FR

12 Watt LED Bulb Pin/Screw type Standard make (1200 lumens of light output,Color temperature 6500 K) with one Year Warranty.

Pin type Holder for bulb Standard make

5Amp Switch Standard make

Insulation Tape Roll Standard make

MCB 16Amp ,Single Pole,50Hz,Breaking Capacity 10KA Standard make

MCB 2 Amp Single Pole,50Hz,Breaking Capacity 10KA Standard make

MCB 6Amp Single Pole,50Hz,Breaking Capacity 10KA Standard make

Nail Standard make

Saddle 6mm Standard make

63Amp 4Pole ,Rated Voltage : 240 V,rated Frequency : 50 Hz Changeover switch

32 Amp. DP,10KA,50Hz Standard make MCB

16Amp S.S. Combine Standard make

16Amp. Socket Standard make

10 Watt LED (3" / 4") Light Conceal type Standard make (70 Lumen/watt with 1 year of warranty,`Product life 25000hrs,Color Temperature : 6000K)

12 Watt LED (4") Light Conceal type Standard make (70 Lumen/watt with 1 year of warranty,`Product life 25000hrs,Color Temperature : 6000K)

15 Watt LED (5")Light Conceal type Standard make (70 Lumen/watt with 1 year of warranty,`Product life 25000hrs,Color Temperature : 6000K)

10 mm² Cable (2C) aluminium make cable ,1.1k V Grade, unarmoured, FRLS type

16 mm² Cable (2C) Al Cable ,1.1k V Grade, unarmoured, FRLS type

40 feet long LED decorative light Rope type with 60 LED's,of various colours (Saffron,green,White,Tri colour)

15 Amp Extension Card (6pin-2 socket with switch,4pin-1 sockey,2pin-1socket)

2Core Telephone wire Standard make (Havells/polycab or equalent)

Angle holder standard make

16Amp 3pin top

400Amp 4P,50KA MCCB (L&T,Schnider)

200Amp 4P,50KA MCCB (L&T,Schnider)

100Amp,4P,25KA MCCB (L&T,Schnider)

SITC of Insulating piercing connectors of sizes suitable for 35Sqmm-240 Sqmm AB Cables) for power connection of Street lights with LT AB Cable

Supply of 200Watt LED outdoor/flood type LED Lumanarie.The lumanaries should be of standard quality with high performance electronic driver instant light with low running temperatue ,AI housing heat sink,effiecient thermal power factor 0.95 ,normal voltage 240V, Over voltage protection surge with warranty period of 02 Years (Philiphs/Panasonic,Havells or equivalent).The luminaire should have minimum system efficacy of 140 lumen/watt for the measured lumen output or system wattage. The LED used shall have CCT of 5700K, SDCM ≤5 and CRI≥70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments.The luminaire LED shall have declared Lifetime of minimum 50000K hours. Product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK10.The driver shall have operating voltage of 120V to 270V, PF≥0.95 @full load, THD ≤10% @ full load, In-built surge protection of 4KV. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown/cut-off at less than 90V & 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2.Successful bidder shall submit the following reports before supply of material for approval: LM79 as per 2019 standard issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, IK Test report for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver.

6 Sqmm 2 core Cu flexible cable

6-32 Amp MCB,Single pole,10KA.

10 Watt LED Light 4' long standard make with 01 Year warranty

12 Watt LED Light 4' long standard make standard make with 01 Year warranty

15Watt LED Light 5' long standard make

Single Phase ,1HP ,Motor (crompton)

SITC of 3.5Core,240Sqmm (Aluminium) armoured extruded PVC type ST2 outer sheathed,650V/1100V Grade as per ID 7098 (Part-I) 1988 upto date ammendments.

SITC of 3.5Core,185Sqmm armoured (Aluminium) extruded PVC type ST2 outer sheathed,650V/1100V Grade as per ID 7098 (Part-I) 1988 upto date ammendments.