Municipal Corporation Tender

Providing and laying stone soling hand packed (above 75 mm) including all sorts of carriages by all means of transport upto site of work complete job .

Providing and laying in position cement concrete of specified grade excluding to the cost of centering and shuttering. All work upto plinth level 1:4:8 (1: cement : 4 Sand; 8 Graded stone agg. 40 mm nominal size. Crushed including carriages by all means of transport up to site of work complete job.

Providing & Laying in position cement concrete.1:1:5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm N.S crushed),reinforced cement concrete excluding the cost of centering, shuttering, finishing & reinforcement. , including all carriages by all means of transport upto site of work complete job

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete job including all carriages complete job.(TMT Bars)

Form work centering / shuttering including Strutting, Propping etc and removal of form work for: (a) Foudation, footings, basis, coloums etc

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels a)18 mm Granite of any colour or shade (area of slab upto 0.5 sqm )

Stone tile work for wall lining upto 10m height with special adhesive like araldite or equivalent over 12mm thick bed of cement mortar 1: 3 (1 cement : 3 coarse sand) including pointing in white cement with an admixture of pigment to match the stone shade.8mm thick (mirror polished and machine cut edges) Granite stone of any colour and shade as per the directions of engineer incharge.

Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge beyond 90 m &upto 150 m depth below ground level. All types of soil 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge. 100mm nominal size dia

Providing and fixing of submeresible vertical water Motor 1.00 HP Capacity ( Crompton, Kirlosker ) of standard quality with all fixtures like control panel complete job as per the direction of EIC

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall 20 mm dia. nominal bore complete job.

Installation of 2 KW automatic stablizar including all necessary fixture and spares of standard make and approved quality including all carriages complete job as per the direction of EIC

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job including all carriages complete job ( For fabraction of Control Unit) (a) (Welded.)

Providing and fixing service line (7/20) copper wire as per the direction of EIC

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe removable as per requirement all complete for bore well of 100 mm dia

Electro-Mechanical Part: Design, supply, erection , testing & commissioning of Slow motion sequencing water jets comprises one no columnar jet made from brass chrome plated with 12nos plain bore brass chrome plated nozzles, columnar jet surrounded by 1.22m dia and 1.52m dia aluminum ring made from non corrosive extruded aluminum alloy. 30no brass chrome plated ball joint nozzle fitted on 1.22m dia aluminum ring and 40no brass chrome plated ball joint nozzle fitted on 1.52m dia ring. Approx. height of columnar jet from 0 to 3 M Inside drop 0 to 2m & Outside Drop 0 to 1.5m. The water effects rise up in various combinations and individually, but constantly changing. Rate of rise and fall also varies but is always majestic. Each effect lit in a different colour for beauty at night. Necessary galvanized steel manifold, mounting stands, distribution pipe work, gun metal balancing valves, etc. complete in all respect. and complete system should be ready & tested in factory and pipe work should be prefabricated at manufacturing unit they shall be cut to size, welded, galvanized / epoxy coated in case of steel at factory. These shall be supplied to site in semi knocked down condition at the site only Assembly work to be done at site. There should also be heavy duty PVC hydraulic hose( Welding, threading and cutting is not allowed at site). .Salt spray test report for Aluminum/MS/GI Pipes used in Fountains as per IS:9000: Part XI – 1983 from NABL accredited Laboratory. Fountain manifold should have galvanized coating of 90 micron complying to IS code of IS:2633 of 1985, and in- house production of nozzles & assembly, (Make: Waterworks International /Premier/OASE/Wet Design/BNA only.

Design, supply, erection testing & commissioning of mono submersible pump sets, with steel mounting frame, grouting bolts stainless steel suction screen etc. complete in all respect. Pump Casing: Cast Iron Impeller: Cast Iron Shaft: Steel Motor Casing: Cast Iron Make: KSB/ Sona / Kirloskar/ Premier only.

Supply, Installation , Testing & commissioning Support stands, ring holding brackes, nuts bolts, washer nipples, Salt spray test report for Aluminum/MS/GI materail used in Fountains as per IS:9000: Part XI – 1983 from NABL accredited Laboratory.etc.

Supply erection & commissioning of Earthing pipes with cable, Earthing pipes are of GI make of (2” x 15 ft long) with GI wire of 2” x 20 ft complete earthing work of Pump & Panel including all other material.

Supply, Erection & commissioning of control panel 1. Electrical panel made of 2mm thick sheet steel enclosure, foot mounted type, epoxy powder coated (Siemen’s grey). Front doors are hingeable & lockable with the body. 2) Degree of protection – IP 54. 3) All cable entry from bottom. 4) All doors and gland plates have spongy rubber gasket. 5) Panel should have the rated main incoming TPN MCB (Make- MDS/ Siemens, L&T, Schneider), rated aluminium bus bar, digital/analogue ammeter and voltmeter with selector switch and every LED light channel protected by SP MCB (Make- MDS/ Siemens, L&T, Schneider). Terminals (Elmex) and necessary rated SP MCB, make MDS/ GE/ Schneider for control circuit. 6) All motors are short circuit protected by MPCB/MCB/HRC Fuse and the motor speed, where required, are to be controlled through rated VFD (Make: Lenze, Delta, Schneider) suitable for pump hp . Panel comprises of 32A,3 Pole spectra range moulded case ckt breaker 18 KA (GE),Voltmetrer selector switch 6A,,Voltmetre (0to 500v)72 x 72 mm Sq flush type ,Motor protection ckt breaker (2.5 to 4A) With fault signalling contact +1Contact.-3,frequency inverter 3 phase-3numbers,Panel mounting axial fan ,diode IN 4007,Micro terminal HRC fuse base and carrier, cam operated two way centre off rotary switch, plug in type relays with LED indicator, auxiliary contactor, terminal connecter, potentiometer, indicating lamp, VFD slow motion controller for jets, with internal wiring. (Make :Havells/Siemens/premier/L&t)

Design, supply, erection, testing & commissioning of 16 Nos. 21W x 12V LED lights (RGB). Waterproof luminaries with array of high output of LEDs housed in compact enclosure of noryl construction. Toughened glass with elastomer seal. Special plastic cable gland. All external nuts and bolts are of AISI 304 standard stainless steel. Adjustable mounting bracket to keep the light body in position. The lights have LED’s giving distinct colors. IP 68 certified from Govt. of India Test Laborator and IES LM79 report for all LED Lights used in Fountains from NABL accredited agency, IP 68 Class of protection as per IS 10322 : Part 1 (2014) 2 e : OASE/BNA/Premier/LBT,Syska.

Design, supply, erection, testing & commissioning Supply erection & commissioning of light controller which switches the lights through distinct colors . Working on with adjustment of timings of each step to give proper sequencing to colored lights. Make: Premier / Oase/ Lite Metal / Water works International / LCI / Pem fountains only..

Supply , Erection & commissioning of Out door Electrical Enclosure fabricated from 18 gauge MS sheet with hinged front door, back wall mounting type with provision for incoming & outgoing cable entry, 12” long legs made of iron angle with locking arrangements & provision for fixing of starters, power supply, T PIN, MCB etc. complete in all respect

Supply erection & commissioning of submersible cable double insulated 3 core 1.5 sq.mm of Finolex / Plaza / Shalimar make for pump.

Supply erection & commissioning of 4 core submersible cable 1.5 sq.mm

Supplying laying of PVC Pipes of 32 mm & 50 mm for electrical wiring ISI marked including digging & refilling of trenches complete in all respect.

Gelcoat hardener & Resin

Junction Box