Municipal Corporation Tender
... More
Search from the latest JKtenders and find a business opportunity fitting your SME on the online platform of BidAssist. If you're wondering how to find the latest JK tenders or from where to get all the documents without the hassles, this is what we explain here. Find the best opportunities coming to the surface via the JK government, PSUs and state corporations.
Municipal Corporation - HAUDD Tender
Eprocure
Opening Date3 Feb 2025
Closing Soon24 Feb 2025
Tender Amount₹ 4,87,60,000
Technical
Technical
Financial
Bid Capacity
... View More
Available Bid capacity = (AxNxM-B) Where:
A = Maximum value of engineering works executed in any one year during the last five years
N = Number of years prescribed for completion of the works for which bids are invited
M = Multiplying factor (usually 1.5)
B = Value of existing commencements and on-going works to be completed during the next ‘N‘ years. Alternatively, Bid capacity = 50% of proposed contract value * multiplying factor (ranging from 1.08 to 1.47 based on the year).
Technical Capacity
... View More
The required prior work experience for the bidder includes specific requirements for key personnel, such as:
- Soil & Material Engineer: B.E Civil + 7 Years Exp. Or Dip. Civil + 10 Years Exp.
- Survey Engineer: B.E Civil + 5 years Exp. Or Dip. Civil + 8 years Exp. For Building work, the bidder should have:
- Three similar completed works costing not less than 40% of the estimated cost
- Two similar completed works costing not less than 50% of the estimated cost
- One similar completed work costing not less than 80% of the estimated cost The bidder should have achieved a minimum average financial turnover on execution of civil engineering works of not less than 50% of the proposed contract/contracts applied, during any of the year out of the last five financial years. The value of work executed shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum. Substantial completions are based on 80% or more works completed under the contract. The bidder should have successfully completed or substantially completed similar works during the last five years, with specific values and percentages mentioned. The similarity of work shall be pre-defined based on physical size, complexity, methods/technology, and scope of works. The bidder should submit a certificate from the employer incorporating the name of the work, contract value, billing amount, date of commencement of works, actual date of completion of work, and satisfactory performance of the contractor. The required prior work experience for key personnel and the values and percentages of similar works completed are mentioned, along with the requirement for the bidder to have achieved a minimum average financial turnover on execution of civil engineering works.
Costs
EMD
₹ 9,75,200Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_HAUDD_271608_1Tender No
e-NIT No 38(P) of 2024-25 of Projects Div. JMCTender Authority
Municipal Corporation ViewPurchaser Address
-Website
http://https://www.jmcjammu.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work
227.33
6
1579.94
... More
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar
18.97
1458
27666.8
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. Including dismembering and stacking within 50 meters lead. Lumpsum Weight for Each Shop for truss and Rolling Shutters
311.54
4
1339.62
... More
Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note: - One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work)
227.96
2912
663865.11
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.
628
27
17458.4
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.
186.2
93
17391.08
... More
Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil
930.6
187
174301.38
... More
Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing off by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)
147.02
79
11666.04
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
112.37
218
24541.61
... More
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
3681
24
88785.72
... More
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 30 cm girth upto and including 60 cm girth.
6
379
2274.3
... More
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 60 cm girth upto and including 120 cm girth.
6
1683
10098
... More
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 120 cm girth upto and including 240 cm girth.
6
7795
46774.2
... More
Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Above 240 cm girth.
6
15627
93765
... More
Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)
151.56
281
42633.83
... More
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)
49.9
7571
377820.35
... More
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
26.68
1455
38836.74
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:3 ( 1 cement : 3 coarse sand)
15.67
981
15380.11
... More
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6 mm cement plaster of mix:1:3 (1 cement : 3 fine sand)
160.72
159
25658.95
... More
Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2mm thick
373.26
181
67578.72
... More
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)
518.54
327
170003.34
... More
Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
373.26
185
69127.75
... More
Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm
100
162
16280
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
562.5
131
74165.63
... More
Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture ( 3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 ( 4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size), including rubbing, polishing and cement slurry and curing complete 18 mm thick crazy marble stone white, black or as specified
209.8
1570
329396.49
... More
Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Light shade using white cement
189.5
1293
245137.2
... More
Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)
213.88
1891
404607.49
... More
40 mm thick fine dressed and rubbed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture with pigment to match the shade of stone and pointing with the same mortar and curing complete Red sand stone
149.4
1238
185084.19
... More
40 mm thick fine dressed and rubbed stone flooring over 20mm (average) thick base of cement mortar 1:5 (1 cement: 5 coarse sand), with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixture with pigment to match the shade of stone and pointing with the same mortar and curing complete White sand stone
52
1268
65951.6
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
287.58
10160
2921855.94
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent
51.5
2336
120327.18
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.
148.25
816
120994.24
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
36.31
8563
310940.69
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm),including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment).
90
87
7834.5
... More
Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge Granite of any colour and shade Area of slab over 0.50 sqm 18 mm thick
346.8
4132
1433133.66
... More
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
124.38
1962
244064.66
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern
329.93
929
306785.41
... More
Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in charge.
167.28
1814
303471.01
... More
Providing and laying CUDDAPAH STONE flooring / dado / on platforms with 20mm to 25mm thick cuddapah stone slab, machine cut to required size laid over a bed of 20mm thick cement mortar 1:4 close jointed and pointed with cement mortar.complete as per direction of engineer-in charge Cuddpah stone Basic rate
219.91
1279
281264.89
... More
Brick on edge flooring in required pattern with common burnt clay non modular bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar and curing complete 1:6 ( 1cement : 6 coarse sand)
174.25
993
173047.68
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
47.3
5733
271199.28
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
379.25
5202
1973199.83
... More
Pre-casting & Placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. pipe 40mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing.
108
859
92772
... More
Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
365.34
416
152164.11
... More
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
60.14
7788
468394.38
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
42.63
9395
400538.69
... More
Centering and shuttering in cluding strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete
340.32
286
97450.63
... More
Centering and shuttering in cluding strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms.
315.36
718
226491.55
... More
Centering and shuttering in cluding strutting, propping etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers
10
577
5775.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars
7194.26
123
886332.83
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes
675
156
105941.25
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
850.28
181
154410.85
... More
Supplying and stacking at site dump manure from approved source including carriage complete (manure measured in stacks will be reduced by 8% for payment)Screened through sieve of I.S. designation 16 mm
50.52
105
5319.76
... More
Mixing earth and sludge or manure in proportion specified or directed by officer in charge
151.57
37
5608.09
... More
Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.) In rows 7.5 cm apart in either direction
260
11
3057.6
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking the clods and mixing with sludge or manure in the ration of 8:1 (8 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8 %), flooding with water, filling with the earth ifnecessary, watering and finally fine dressing, leveling etc. including stacking & disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 mtr. and lift upto 1.5 mtr. complete (cost of sludge, manure or extra earth to be paid for separately)
102
225
23016.3
... More
Providing and fixing M.S. flat iron tree guard 60 cm dia. and 2 m high above ground level formed of 4 nos. 25x6 mm, 2.25m long and 8 nos. 25x3 mm 2 m long vertical M.S. flats riveted to 3 nos.25x6 mm MS flat iron rings in two halves, fixed together at site with required 6 no. of 8 mm dia. and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD/PWD/any other approved name The tree guard shall be suitably fixed to the ground by embedding four legs of the tree guard in pits of suitable dia. and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction on direction of Officer-in-charge
21
6169
129566.85
... More
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded)
157.5
18
2913.75
... More
Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
150
638
95835
... More
Providing and Fixing Pole Hanging Dustbins of Capacity 10 Litres (each) or more made with HDPE Plastic in blue and green color of approved make and design approved by the Engineer-in-Charge complete with fixed type MS mounting frame made with MS hollow tubes and painted on the outside with synthetic enamel paint of color as approvee by the Engineer-in-Charge. the Cost includes embedding the frame in ground in a base of c.conc. (1:3:6) over a leveling course of c.conc.(1:5:10). Cost of material, lids and carriage are all included in the rate
48
638
30624
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge
209.96
1885
395974.06
... More
Providing and placing in position 100mm thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains offootpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
97.56
3681
359176.9
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 20 mm nominal outer dia pipes.
600
320
192420
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 25 mm nominal outer dia pipes.
300
402
120735
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
128000
8
1120000
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bor
6
986
5916.9
... More
Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating
26
5679
147669.6
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete 300 mm dia. R.C.C. pipe
360
837
301518
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end) 25 mm nominal bore Horizontal
260
593
154388
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end) 25 mm nominal bore vertical
260
640
166556
... More
SITC of self priming water pump of 1 H.P of approved make and type
6
5500
33000
... More
SITC of self priming water pump of 0.5 H.P of approved make and type
6
3500
21000
... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2 x 2.5 Sqm + 1 x 2.5 Sqm earth wire
3240
275
891000
... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required 2 x 4 Sqm + 1 x 4 Sqm earth wire
3125
334
1043750
... More
Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required 2 output per phase and suitable for single phase supply
6
8557
51342
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
12
2573
30876
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door
12
2315
27780
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way (4 + 18), Double door
12
4974
59688
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required Group – C
96
1467
140832
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 150 mm width X 50 mm depth X 1.6 mm thickness
125
604
75500
... More
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required 300 mm width X 50 mm depth X 1.6 mm thickness
330
777
256410
... More
Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade 3 ½ C - 50 sq mm Aluminium
150
564
84600
... More
Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade 4C- 10 sq mm Aluminium
150
289
43350
... More
Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor power/ multicore control armoured cable of 1.1 KV grade 4C- 6 sq mm Aluminium
150
254
38100
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required Upto 35 sq. mm (clamped with 1mm thick saddle)
45
45
2025
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
150
92
13800
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 3½ X 50 sq. mm (35mm)
30
413
12390
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 4 X 10 sq. mm (25mm)
30
269
8070
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required 2 X 6 sq. mm (19mm)
30
240
7200
... More
Supply of Elegant look 20 W AIO LED Solar Street lights having extruded alluminium housing, 50 Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 18 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of 4500 lm (Efficacy of 150 lm/ w ) as LM 79 report of third party NABL lab . Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the luen efficacy,luminaire output , IK 07 and IP 65 protection ( In house NABl lab reports will not be acceptable). The complete Solar lighting system must be warrantied for a period of 5 years . The Solar lighting companies must be having toll free base service network to provide immediate after sales service through their service newtorks available in different districts of the state .The Solar lighting companies should submit the lighting design report prepared by their in house lighting design team if required as per the direction of engineer in charge.The AIO solar street lights shall be of Anchor by Panasonic make PA020W11MLF2401 or its equivalent of Philips/Havells
5
53800
269000
... More
Providing, fixing and installing of profile light linear Led light of 17mm visible diffuser width of any desired length made of extruded aluminum housing having PMMA diffuser to give an endless infinite light look of Wipro/ Tisva/ Philips/ Trilux. The fixture shall have a strip light of minimum 10 watts per meter to provide high lumen output in desired colour temperature. the extruded section shall be both recessed mountable or surface mountable, the springs etc for recess mounting shall be suplied with the fixture. The rates quoted are for the entire fixture including the extruded aluminium section, diffuser , drivers & 20 watts/rmt LED strip to be measured in Rmt . The rates are inclusive of cutting, chiselling, electrical supply inclusive of wiring of 2x1.5 sqmm, modular switch, modular plate, modular box etc all complete fittings for switching on and off of the fixture. Each 1 rmt fixture to be controlled by 1 no. 5 amp. switch. the rates quoted here are inclusive of the wiring and switches etc but since the other fixture shall only be looped deduction of rates as quoted below shall be applicable on the looped fixture.
60
500
30000
... More
SITC of Elegant look 15 W AIO LED Solar Street lights having extruded alluminium housing, 40 Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 18 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of 4500 lm (Efficacy of 150 lm/ w ) as LM 79 report of third party NABL lab . Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the luen efficacy,luminaire output , IK 07 and IP 65 protection ( In house NABl lab reports will not be acceptable). The complete Solar lighting system must be warrantied for a period of 5 years . The Solar lighting companies must be having toll free base service network to provide immediate after sales service through their service newtorks available in different districts of the state .The Solar lighting companies should submit the lighting design report prepared by their in house lighting design team if required as per the direction of engineer in charge.The AIO solar street lights shall be of Anchor by Panasonic make PA015W11MLF2401 or its equivalent of Philips/Havells
18
48900
880200
... More
SITC 100W Solar Bench PV Solar Module: 100Wp, Battery: LiPO4 Lithium 12.8V/36Ah and LED Light Display:14W, Controller: Smart MPPT. ANODISED WEATHER PROOF FOR RUST / DUSTPROOF
11
196000
2156000
... More
SITC 3/5mtr decorative pole with double side lamp 60 watt solar panel 2 nos 12 ah battery pho4
lithium 2 nos 15 watt solar lamp With complete accessories
12
14000
168000
... More
SITC Decorative Lamp Post with frame and lights 10Ft Decorative Pole Light With Double Arm, Round Base Plate – 300mm*12mm, MS pipe - OD76mm*2.5mm thickness, Lamp Post & Arm – Cast Aluminium, Base Cover – Cast Aluminium, B22 – Holder, Acrylic Diffuser, Colour – Black, PU Paint Coated As Per Design
12
8000
96000
... More
Supplying, Installing including cost of trenching, refilling etc all complete biodigestor of 1000 Ltr capacity made of FRP or other high density plastic compounds comprising of suitable seperation and sedimentation zones
5
20000
100000
... More
600 MM BOLLARD LIGHT, 12 WATT LED, 100 MM DIAMETER, 600 MM HEIGHT, ACRYLIC
DIFFUDSER, WW, 2 YEAR WARRANTY, SS SCREW, TOP ALUMINUM CASTING,
108
3800
410400
... More
Led Outdoor Beam High Throw Focus Spot Light Upto 25 Meters Distance Light For Attraction - Warm White, Light source: High Power CREE LED Material: pressure casting & Aluminum, Input voltage: AC85-265V. Material: pressure casting & Aluminum Input voltage: AC85-265V Reflector efficiency: 95% Light source: High Power CREE LED Body temperature: -35℃+50℃, Wattage: - 10W LED working temperature: 65C
24
2300
55200
... More
Outdoor 3d Acrylic Led Letter, High-grade acrylic panels, aluminum frame, Polished or matte finish options available. Includes mounting hardware and accessories for versatile installation
1210.5
300
363150
... More
SITC MAIN PANEL with following specifications: INCOMER 1 No. 250amps 4P MCCB(25KA) with thermal Magnetic release (PRTM) with Class-C transient voltage surge suppression device suitable for 3 phases as per specifications 1 No.250 amps ATS METERING & INDICATION for each Incomer 1 set of R,Y,B phase indicating lamps Multifunction digital meter (consisting of Voltage, Current, Frequency, PF, kWh, kVA, harmonics upto 15th order & %THD) with RS-485 Port Sets of 250/5A, CL-1, 15VA CTs for measuring Sets of phase indicating lamp with 2A control MCBs BUS-BAR 300A TPN Aluminium Bus Bar with colour coded PVC Sleeves OUTGOINGS 12 Nos. 63 Amp TPN MCB Building panel as described above
1
571000
571000
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
3
13838
41514
... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
50
51
2550
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe FRLSom earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
50
1551
77550
... More
Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy as per direction of the officer-in-charge.
24
35
861.6
... More
Providing and Displaying Acalypha green well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/Plastic Pot bushy as per direction of the officer-in-charge.
30
35
1077
... More
Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
31
41
1271
... More
Providing and Displaying Ficus nuda topiary well developed with fresh & healthy foliage 45 to 60cm spread 75 to 90 cm ht. bushy in 35 cm Cement Pot as per direction of the officer-in-charge.
90
338
30442.5
... More
Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
100
20
2000
... More
Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags
12
350
4200
... More
Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
12
65
780
... More
Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.
12
180
2160
... More
Providing and stacking of Foxtail palm of ht. 120-150 cm bottom girth 15-20 cm well developed in big poly bags of size 25 cm as per direction of the officer-in-charge
12
230
2760
... More
Providing and stacking of Plumeria alba of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the officer-in-charge
12
120
1440
... More
Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge.
12
50
600
... More
Providing and stacking of Hibiscus variegated of height 60-75 cm. with healthy variegated foliage in earthen pots size 25 cm as per direction of the officer-in-charge.
12
55
660
... More
Providing and stacking of Tabernaemontana coronaria (Chandni single) of height 75-90 cm. with 5-6 branches in bag of size 25 cm as per direction of the officer-in-charge.
12
45
540
... More
Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
12
45
540
... More
Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
12
40
480
... More
Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra, Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
12
40
480
... More
Supply, installation, testing and commissioning of indoor UL/FCC Listed colour dome IP camera,1/3'' CMOS sensor,2 Megapixel, varifocal 2.8-10 mm lens, Auto Iris, Day Night cameras(0.1 Lux ) including integrated IP 56,Tamper proof & Motion detection, complete with Dome Housing, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories.(Make Bosch/ Samsung/ Hikvision or equivalent)
24
6500
156000
... More
Supply, installation, testing and commissioning of indoor UL/FCC Listed colour Box type IP camera,1/3'' CMOS sensor, 2MP, varifocal 3-12 mm lens , Auto Iris, Day Night cameras with ICR (0.1 lux ) including integrated IP 56,Tamper proof & Motion detection, complete with box Housing, Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories. (Make Bosch/ Samsung/ Hikvision or equivalent)
24
7000
168000
... More
Supply, Installation, Testing and Commissioning of 32 Channel Network Video Recorder for recording real time audio & video and data applications , inbuilt storage, redundant Fans & Power Supplies. The DVR should store all cameras at 4CIF resolution at H.264 compression for minimum 30 days backup @18 FPS, or min 6 TB harddisk capacity, should have built in DVD writer or USB for video archival, 2 monitor outputs,LAN connectivity etc. Please note the DVR should comply to EN, FCC, UL standards. The system requirement are mentioned in the specifications. The DVR should be networkable via IP protocol & should be able to connect to a web based system for remote viewing via web system.. (Make Bosch/ Samsung/ Hikvision or equivalent)
2
56000
112000
... More
Providing , supplying & installing 24 port POE switch of 10/100/1000 Mbps 24 ports & 4 Uplink ports of make Cisco/ Linksys / Avaya including installation termination mounting etc complete in all respects.
2
32000
64000
... More
Supply, installation, testing and commissioning of 19" 9 U Presidential equipment rack of required size made out of CRCA sheet steel duly powder quoted & provided with P.V.C channel to house all the control equipment's, amplifiers with wiring & switches complete in all respect.rates quoted are inclusive of 24 port patch panel of Legrand/ AMP/ Tyco make complete in all respects including 1 mtr patch cables of same make, terminated and complete
1
20000
20000
... More
Providing & laying in place cat-6 cable in conduits complete with bends, flexible pipe, RJ45 connectors etc . Including termination. (Legrand/ Amp/ Digilink)
900
49
44100
... More
Design, Supplying, installing, testing & commissioning of Kiosks Container 7x7x8.6 ft 7ft X 7ft New fabricated M.S office Container (2100x2100MM), BASE FRAME – 150 X 75 MM I/C Channel, CROSSFRAME–75X75MMSQPipe3MMTH, Corner post (100 X 100) Profile structure, FLOOR –CEMENT FIBRE, BOARD water proof 18 MM TH. Fitted with screw on Pipe, WALL & ROOF – 1.2 MM MS SHEET, Heavy locks upon the container attached with pillar for Loading & Unloading Purpose, 1 nos. Shutter 6x6 feet, 8mm Commercial Board with Sun Mica Pest, Outdoor new paint, Inner and outer Red oxide, Inner Paint oxide, Electricals Fitting Switch Socket, Vinyl Flooring1.3mm on floor, Bulked Light (Outer light) as per Male Female Socket for Main Line (outer)
105
160000
16800000
... More
Design, Supplying, installing, testing & commissioning of Kiosks Container 7x9x8.6 ft 7ft X 9ft New fabricated M.S office Container (2100x2700MM), BASE FRAME – 150 X 75 MM I/C Channel, CROSSFRAME–75X75MMSQPipe3MMTH, Corner post (100 X 100) Profile structure, FLOOR –CEMENT FIBRE, BOARD water proof 18 MM TH. Fitted with screw on Pipe, WALL & ROOF – 1.2 MM MS SHEET, Heavy locks upon the container attached with pillar for Loading & Unloading Purpose, 1 nos. Shutter 6x6 feet, 8mm Commercial Board with Sun Mica Pest, Outdoor new paint, Inner and outer Red oxide, Inner Paint oxide, Electricals Fitting Switch Socket, Vinyl Flooring1.3mm on floor, Bulked Light (Outer light) as per Male Female Socket for Main Line (outer)
20
175000
3500000
... More
Design, Supplying, installing, testing & commissioning of Washroom Container 7’X10’X8.6, 7ft X 10ft New fabricated M.S office Container, BASE FRAME – 100 X 50 MM I/C Channel, CROSSFRAME–50X50MMSQPipe3MMTH, Corner post (75 X 75) Profile structure, FLOOR –CEMENT FIBRE BOARD water proof 18 MM TH. Fitted with screw on Pipe, OUTDOOR WALL & ROOF – 1.2 MM MS SHEET, Heavy locks upon the container attached with pillar for Loading & Unloading Purpose 2nos. of MS door 6’x2.6’ ft with PVC Sheet and Shed, 2nos of PVC Door 6x2.6’ ft, Outdoor New Paint. (Berger 2 Coat Paint), Inner and Outer Redoxide. Electricals Fitting: Switch’s & Socket’s, Vinyl Flooring1.3MM on floor, 50MM Glass Wool Insulation, 1nos. of Bulked Light (Outer light), 2nos. of LED Tube Light, 1nos. of Exhaust Fan.1nos. Washroom 3x10’ft (For Male), 1nos. of Wash basin.1nos. of Water tap, 1nos. of Western Commode. (Wall’s & Roof: ACP Sheet’s), )1nos. of Jet Spray, )1nos. of Urinal, 1nos. of Mirror. 1nos. of Towel Handel, )1nos. of Soap Dispenser, nos. Washroom 3X10’ft (for Female), 1nos. of Washbasin,1nos. of Water tap, )1nos. of Western Commode. (Wall’s & Roof: ACP Sheet’s)1nos. of Jet Spray, )1nos. of Towel Handel, 1nos. of Mirror.1nos. of Soap Dispenser
5
122000
610000
... More
Provision for engagement of local artisans for painting of social messages/vibrant
paintings/cartoons/Scenes etc including preparation of surface, base layer paints top coat
paints, etc. all complete. The artisan engaged should be local origin and shall have to get
approved his/her painting ideas from EIC beforehand. 50% of the artisan work shall
correspond to social messages as approved by JMC, and the rest shall be freestyle paintings
imagined by the artisan and approved by JMC. The bidder shall be responsible for
engagement of artisan and getting their ideas approved. Quoted shall cost shall include
negotiations on art supplies and paints etc for which nothing extra shall be paid. The
negotiations for the same shall be the responsibility of bidder and engaged artisan.
1220.18
400
488072
... More
Supplying and stacking at site 53 mm to 22.4 mm size stone aggregate
17.01
1204
20482.59
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level 300mm dia
300
544
163335
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. Rocky strata including boulders 300mm dia
150
1310
196515
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge 150mm nominal size dia
300
712
213780
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well screen (RMS) pipe with ribs, conforming to IS: 12818, including hire and labour charges, fittings and accessories etc all complete for all depths as per direction of Engineer-in-charge150mm nominal size dia
150
743
111540
... More
Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/medium/coarse in required grading and sizes as per actual requirement all complete as per direction of Engineer- in-charge.
50
1068
53410
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (Part 1) 150mm dia
10
284
2843
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%