Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/maintenance Of B/r Compliance Nature Of Works At Tech Area At Jammu And Kaluchak Area Under Ge Air Force Jammu in Jammu, Jammu & Kashmir, with an estimated contract value of Rs. 20,00,000. The bid opening date for this tender is 30-03-2019 and the last date for bid submission is 22-04-2019. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender

Opening Date30 Mar 2019
Closing DateCancelled
Tender Amount₹ 20,00,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
S&F for Aluminium alloy Butt hinges with galvanised mild steel hinge 100 mm long anodised, fixed in repair, complete all as specified and directed.

20

-

-

... More
Demolition of unreinforced cement concrete above ground floors and exc 15cm thickness ( above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 mitres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

2

-

-

... More
Cleaning manually of blocked WC, EWC seat trap, inside Bldg and gully trap it includes remove/refixing of grating and cleaning of WC's trap,kitchen/bath traps any type/pattern (pedestal/squatt pattern) upto 1st manhole and making the drain pipe of any size full functional by flushing with water to entire satisfaction of Engr-in-Charge including cleaning of 1st manhole and removing the waste material/sludge etc to a distance n.exc 50m and burring the same in pits complete all as directed by Engr-in-Charge. (Measurement will be carried out each time depend on blockage)

250

-

-

... More
S&F for Aluminiun anodised barrel tower bolts of extruded section of size 100mm, complete all as specified and directed.

25

-

-

... More
S&F for Aluminium anodised handle of extruded section 100 mm long fixed with screws complete all as specified and directed.

30

-

-

... More
M&L for 2nd class hardwood beads sectional area n.exc 3 Sqcm for glazed or gauged Joinery , ceiling incl secured with nails, fixed in repairs complete all as specified and directed.

30

-

-

... More
10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete fixed in repairs all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in performance of makes as specified in PS.

50

-

-

... More
S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge.

40

-

-

... More
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

5

-

-

... More
M&L for 2nd class hardwood beads sectional area exc 3 Sqcm but n. exc 6 sqcm for glazed or gauged Joinery , ceiling incl secured with nails, fixed in repairs complete all as specified and directed.

5

-

-

... More
M&L for 10 to 12mm width and 50mm to 100 mm in depth of cutting and filling of joints with bitumenous filler & top 30mm thick filled with sealing compound Grade "B" for crecked surface of including preparing surface smooth by grinding uneven surface complete all as specified and as per manufacturers instructions and as directed at site.

10

-

-

... More
Re fixing only 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

50

-

-

... More
Supply and fixing 15mm bore center hole basin mixer with regular spout with pop up waste assembly with 10mm dia 450mm long braided hoses and brass nuts, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat Part No CON-167KNB or equivalent of Marc/Kohler

10

-

-

... More
S&F for Aluminium alloy Butt hinges with galvanised mild steel hinge 100 mm long anodised, complete all as specified and directed.

16

-

-

... More
Plastic seat cover for water closet seat, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and as directed by Engr-in-Charge.

20

-

-

... More
S&F for aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair complete all as specified and directed.

20

-

-

... More
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 mitres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

10

-

-

... More
S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat all as specified and as directed by Engineer-in-Charge.

20

-

-

... More
Dismantling wall & ceiling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

180

-

-

... More
S&F for GI Elbow of 15mm dia fixed in repair complete all as specified and dirceted.

15

-

-

... More
Removing air lock from GI pipe of any size by opening of joints/fittings and refixing the same after the job is done complete all as specified and as directed.

50

-

-

... More
Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

220

-

-

... More
S&F for Aluminum, anodized, barrel tower bolts of extruded section 150 mm long,complete all as specified and directed.

40

-

-

... More
Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge.

4

-

-

... More
Taking down wooden shutter of any dscription n.exc 1.00 Square metre, each (with all fittings) complete all as specified and directed.

45

-

-

... More
M/L Cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate in roof kerbs or mud stops, kurb stone, rounded or chamfered on edge including necessary form work complete.

1

-

-

... More
Cleaning of underground SGSW pipes of size 150mm dia by rodding from manhole to manhole or manhole to septic tank/well including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material/sludge to a distance of n. exc 50m and burrying the same pit and replacing manhole cover in position after cleaning (measurement will be carried out each time depend on blockage) complete all as specified and directed by Engr-In-Charge.

250

-

-

-

-

-

... More
Taking down Aluminum frame exc. 1.5 Square metre but n.exc 4.00 Square metre each with taking off Aluminum shutter from frame and removed from site complete all as specified and all as directed by Engineer-in-charge.

22

-

-

... More
S&F for in Repair PVC rain water pipe bend & shoo etc for 110mm dia pipe fixed in repair complete all as specified and directed.

10

-

-

... More
M&L for 20 mm thick interlocking machine pressed precast concrete interlocking paver block any shape, any colour and rubber finished type confirming to IS 15658-2006, M-35 grade laid and jointed in neat cement slurry with grey cement and pigment complete all as specified and directed.

40

-

-

... More
S&F for 2nd class hard wood (Sal), plain, solid, straight, chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete.

0.2

-

-

... More
M&L for 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

100

-

-

... More
Taking down wooden shutter of any dscription exc 1.00 Square metre but n. exc 2.00 Square metre ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specifed & directed.

40

-

-

... More
S&F in repairs Gate Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and dirceted.

10

-

-

... More
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.

6.15

-

-

... More
S&F for GI Nipple of 15/20mm, 50mm length complete, fixed in repairs, all as specified and dirceted.

40

-

-

... More
M&L for 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and dirceted.

200

-

-

... More
Supply only Liquid Water Proofing admixture complete all as specified and directed by Engr-in-charge.

3

-

-

... More
Brass Chromium plated over head shower rose with swivel joints, any size, including 190mm long arm fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

2

-

-

... More
S&F for minimum 5.00 mm thick looking mirror with decorative type wooden beading of any size and spcified thickness, bevelled edge of selected quality glass mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws fixed in repair complete fixed in repair all as per directed.

10

-

-

... More
S&F in repair cast copper alloy 15mm dia concealed stop cock screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and dirceted.

5

-

-

... More
S&F for rounded block made in round shape and coated with brown/cherry/Golden colour suitable for curtain rod 20mm dia fixed in repair complete all as specified and as directed.

60

-

-

... More
S&F for Aluminium anodised barrel Tower Bolts of extruded section 200 mm long fixed with screws complete all as specified and directed.

30

-

-

... More
S&F in repair Angle valve 2-in-1 cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and dirceted.

10

-

-

... More
S&F for Mild steel pressed handle oval type, stove enameled black 125 mm size fixed in repairs complete all as specified and directed.

10

-

-

... More
S&F in repair Angle valve cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and dirceted.

30

-

-

... More
Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

4

-

-

... More
S&F for Block board 19/20mm thick, grade 2 quality, interior grade, commercial type, fixed with nails/screws sin cup board shutter/pelmets etc. or to timber frame work, complete all as specified and directed.

20

-

-

... More
S&F for Towel ring of CP fixed with and chromium plated brass screws and wooden/plastic cleats fixed in repair complete all as specified and directed..

10

-

-

... More
S&F in repairs Health faucet including PVC pipe with brass nuts for EWC as approved by Engr-in-charge complete all as specified

10

-

-

... More
S&F for GI Tee of 15mm dia fixed in repair complete all as specified and dirceted.

10

-

-

... More
Supply and fixing PVC low density waste pipe 40mm bore of standard length with cup and washers for kitchen sinks, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

100

-

-

... More
S&F for GI Nipple of 15/20mm, 75mm length complete, fixed in repairs, all as specified and dirceted.

30

-

-

... More
Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) fixed to pipe or union of 15mm bore, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. Make: Prayag/Polytuf/Supreme

2

-

-

... More
S&F for repair CP central hole grating 100mm dia as suitable to existing trap as per requirement complete all as specified and directed.

30

-

-

... More
S&F for 110mm bore Cast Iron (SWR) 'P' or 'S' trap, including fixed with solvent cement complete all as specified and directed.

18

-

-

... More
Cleaning and dewatering of septic tanks, soakage well/pits of any depth incl let and outlet chamber and removing slauge (in solid and semi solid), silt, both organic and in-organic nature including any type of waste matterial after plugging of incomimg sewage line and removing waste material / sludge etc to a distance n. exc 100m and burrying the same in pit complete all as specified and directed by Engr-In-Charge.

20

-

-

... More
S&F in repair cast copper alloy 20mm dia stop cock screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and dirceted.

5

-

-

... More
M&L for Prepration of old surfaces of wall and applying one coat of white wash complete all as specfied and directed.

500

-

-

... More
S&F for GI Nipple of 15/20mm, 150mm length complete, fixed in repairs, all as specified and dirceted.

40

-

-

... More
S&F in repair PVC cabinate mirror coloured of size 300x450mm fixed with screw and PVC gutty on wall complete all as specified and directed.

5

-

-

... More
S&F for Aluminiun anodised barrel tower bolts of extruded section of size 100mm fixed in repair complete all as specified and directed.

25

-

-

... More
Stainless steel sink, with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm fixed in repairs complete all as specified and as directed.

1

-

-

... More
M&L for Granite work 18-20mm thick (Table rubbed and polished) in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shede complete all as per specified and as directed.

2

-

-

... More
Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

10

-

-

... More
M&L for 100 mm thick plain cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and as directed by Engr-In-Charge.

120

-

-

... More
Taking down wooden shutter of any dscription exc 1.00 Square metre but n.exc 2.00 Square metre , each (with all fittings) complete all as specified and directed.

40

-

-

... More
S&F for Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repairs complete all as specified and directed.

4

-

-

... More
M&L15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed by Engineer-in-Charge.including integral liquid WPC by wt of cement as per manufacturer instruction (NOTE : Supply only WPC will be measured and paid for separately), complete all as specified and directed by Engr-in-charge.

15

-

-

... More
M/L Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

50

-

-

... More
Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed by Engineer-in Charge.

40

-

-

... More
S&F for in repair 20mm dia ball Valve high pressure of PTMT with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and dirceted.

87

-

-

... More
15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

30

-

-

... More
Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with wire brushing and cleaning top surface of tiles, Lime terracing or cement concrete, including flashings and junction of parapets, and use to neat cement slurry (3.0 kg of cement per Square metre) debris and rabbish from site complete all as specified and directed by Engineer-in-Charge.

15

-

-

... More
M&L for 8 mm thick PVC laminated Gypsum ceiling board / tiles , 59.50x59.50 cm in size, fixed in ceiling with screws to frame work with Aluminium grit frame work or GI channel powder coated at bottom , frame work complete all as per manufacturer instruction & complete all as specified and as directed.

50

-

-

... More
Aluminnium window fixed type with three track (min 1.5mm thick) with three shutters made of 18X40X1.25 mm section (one for whire mesh and two for tinted glass) with rubber gasket beading and locking arrangement etc complete all as specified incl 5.5mm thick tinted glass and wire mesh of size 0.56mm dia of wire and 1.40mm aperture including making good distrubed surfaces complete all as specified and directed by Engineer-in-Charge.

10

-

-

... More
S&F for aluminium grill of over shape aperture not exceeding 8 cm and with bar dia not less then 7mm fixing with all necessary fittings and fixture complete all as specified and as directed. Make : Hindalco, Indalco, Jindal

10

-

-

... More
S&F for in repair ball Valve high pressure of PTMT with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed with 15mm dia complete all as specified and dirceted.

10

-

-

... More
M&L for ceiling with non Asbestos cement designer building boards 4mm thick fixed with GI channel powder coated at bottom , frame work complete all as per manufacturer instruction & all as specified.

120

-

-

... More
(2) One supperviser to be detailed by the contractor and will report at complaint cell to collect daily complaint slip from the complaint cell and returned back the same after rectficaion of the same.

-

-

-

... More
S/F Ply wood, 6mm thick, 5 ply, grade BWR, type BB, fixed with nails to timber frame work fixed in repair complete all as specified and directed. Make : Greenply/Century/Bhutan board /Durian

5

-

-

... More
S&F for 3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Square metre in each pane etc complete all as specified and directed.

30

-

-

... More
Continuous (piano) hinges width of flaps 40 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

12

-

-

... More
S&F in repair cast copper alloy 15mm dia stop cock screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed complete all as specified and dirceted.

20

-

-

... More
Preparation of old plastered surfaces of wall and applying one coat of cement base paint complete all as specfied and directed.

500

-

-

... More
PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge. Make: Prayag/Polytuf/Supreme

50

-

-

... More
S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge

15

-

-

... More
M&L for glazed ceremic highliter tiles of any size in 7-8 mm thick, as in dado, vertical surfaces set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

2

-

-

... More
Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Technical area of Air Force station and Kaluchak area

-

-

-

... More
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern of roof coverings, complete all as specified and directed.

130

-

-

... More
S&F for Extruded aluminum alloy handle, fabricated type, anodized 125mm size, fixed in repairs complete all as specified and directed.

40

-

-

... More
PVC connections 15 mm size with PTMT nuts of length 450 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge. Make: Prayag/Polytuf/Supreme

80

-

-

... More
S&F for 3.00mm thick figured type pin headed glass sheet ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exe 0.5 Square metre in each pane etc complete all as specified and directed.

10

-

-

... More
Disconnecting existing tanks capacity of tanks exe 250 Litre and n.exe 500 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge.

80

-

-

... More
Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified and directed by Engineer-in- Charge.

50

-

-

... More
S&F for Aluminium anodised handle of extruded section 100 mm long fixed with screws fixed in repair complete all as specified and directed.

40

-

-

... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

56

-

-

... More
M&L for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with 02 nos MS 100mm size barrel tower bolt for each leaf and Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge.(Note :- Glass panes shall be measured and paid for separately).

12

-

-

... More
S&F in repair CP grating 100mm dia as suitable to existing trap as per requirement complete all as specified and directed.

15

-

-

... More
S&F in repairs PVC water tank cover for 1000 Litre and 500 Litre capacity including proper fixing with clamp &nut bolt complete all as specified.

50

-

-

... More
Dismantling wrought iron or mild steel work,frame work such as truss, wind tie, angle frame work , concertina coil of any description complete all as specified and as directed.

6.65

-

-

... More
Disconnecting existing tanks capacity of tanks exe 500 Litre and n.exe 1000 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge.

30

-

-

... More
S&F For Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-In-Charge.

10

-

-

... More
M/L Cement concrete 1:2:4 type B0 using 12.50mm graded stone aggregate in floors, 40mm thick, laid in panels and finished even & smooth without using extra cement complete.

45

-

-

... More
S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed.

100

-

-

... More
Supply and Fixing brass mortice lock four levers vertical type size 100mm or above fixed in repairs, complete all as specified and as directed by Engr-in-Charge. Make : Harrison/Godrej/Link or equivalent as specified in PS

10

-

-

... More
S&F for GI sockets of of 15mm dia fixed in repair complete all as specified and dirceted.

30

-

-

... More
Repair/adjustment to washer/ siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug etc and making it functional complete all as specified and directed.

100

-

-

... More
S&F for Hangers 6 mm dia GI ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long drawing complete all as specified and as directed.

170

-

-

... More
M&L for Brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

1

-

-

... More
Epoxy heavy duty flooring 6mm (5mm+1mm) thick of make Supreme Polymer or 6mm (4mm+2mm) thick of make Sika or 6mm (4.5mm+1.5mm) thick of make Cipy Polyurethanes Pvt. Ltd. including preparing surface smooth by grinding uneven surface including cutting and filling of joints complete all as specified and as per manufacturers instructions.

6

-

-

... More
S&F for MS PVC coated brackets made inshape and size to hold certain rods and size of bracket 150mm colour and Pattern approved by GE complete all as specified and as directed.

80

-

-

... More
Aluminium partation frame of natural anodized aluminum min 1.5mm thick of size 63.50 x 38.10mm including necessary jointing cleats and fixing frame to wall/floor with all fixing arrangement incl providing and fixing of 5.5mm thick sheet glass/12mm thick prelaminatd partical board of selected quality with rubber packing with anodized aluminium beading/glazing clip size 19.00 x 17.30 x 0.70mm on both side complete alongwith neoprene lining and incl door/window shutter cut to required length/width complete in all respect as per manufacture instructions and inclduing making good distrubed surfaces complete all as specified and directed by Engr-in-charge (Aluminium frame will be provided with/without groves & to accommodate glass, grill etc as per site requirement).

2

-

-

... More
Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.

150

-

-

... More
S&F for Aluminium anodised barrel Tower Bolts of extruded section 200 mm long fixed with screws fixed in repair complete all as specified and directed.

30

-

-

... More
S&F for magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

20

-

-

... More
S&F for aluminium die cast body floor door spring hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair complete all as specified and directed.

4

-

-

... More
S/F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

120

-

-

... More
M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall with screws to make PVC frame as per specification and drawing.

20

-

-

... More
Supply and fixing PVC low density waste pipe 32mm bore of standard length with cup and washers for urinal/WHB, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

100

-

-

... More
S&F for Aluminum, anodized, barrel tower bolts of extruded section 150 mm long, fixed in repairs complete all as specified and directed.

30

-

-

... More
M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 Square metre but n exc 0.18 Square metre in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specified and directed.

50

-

-

... More
Re fixing only 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor complete all as specified and dirceted.

20

-

-

... More
M&L for Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, fixed in repairs complete all as specified and directed.

40

-

-

... More
S&F 20mm dia ball Valve high pressure of PTMT with PVC float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and dirceted.

13

-

-

... More
Waste coupling of PTMT (half or full threaded), 32mm bore dia of discharge pipe (Minimum weight 32mm-45gms/40mm-60 gms) fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

20

-

-

... More
S/F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

30

-

-

... More
M&L for Anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, complete in all respect as per manufacture instruction nad including making good disturbed surfaces complete all as specified and directed by Engineer-In-Charge.

200

-

-

... More
S&F in repair brass spindle complete for 15mm dia bib tap complete all as specifed.

50

-

-

... More
25 mm thick, Plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.

160

-

-

... More
Repairs to leaking water in pillar tap, stop cock, angle valve, bib taps of any description by replacing the washer complete all as specified and dirceted.

200

-

-

... More
M&L for coloured vitrifired ceramic tiles light shade tiles 10 mm thick, area of each tile n exc 0.36 Square metre in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 to match Shade, pattern, laying etc of tiles complete all as specfied and directed.

50

-

-

... More
Repair & refixing in same position of aluminium anodised door shutters of any description, size exceeding 1.50 Sqm but not exceeding 4.00Square Metre by taking down/without taking shutters from the frame, disconnecting carefully shutter member with deligaetd tools and as per manufacture's instruction. Removing broken aluminium mongeries, tilted aluminium beads, teared T rubber gasket and cleats in hollow blocks of rails and retightening in same position with excessess sectional area steel screws incl tightening mild steel rod with nuts in hollow blocks of members of shutters of lock side rail and hinge side rails and reassembling shutter with old retrieved members carefully such as ACP panel/prelaminated board, tinted glass 5.5 mm thick in same situations and securing both side with supply and fixing new rubber T gasket and aluminium beads to making the door air tight including refixing of old aluminum hinge, tower bold, mortice lock, bolts, handle, door stoppers, hydraulic door closer and refixing shutters in same opening after assuring complete alignment etc. Repairing floor spring where provided including making good alignments. Also adjusting door chowkats and frame and refixing with new rowl plugs & 3 to 4" long standard steel flat headed screws and assuring the strength of chowkats/frames before refixing shutters etc complete all as specified and directed.

125

-

-

... More
S&F for Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel fixed in floor with over all length of cover plate 140 mm fixed in repairs complete all as specified and directed.

30

-

-

... More
Taking down or cutting MS helical door spring 150mm to 200 mm long by removing welding or chiseling etc from metal door frames and Supply and fixing MS helical door spring of same size in position by running welding n. exc 6 mm thickness of metal and including fixing roller plate on wooden rail with screws complete all as spd and ditected by Engr-in- charge.

20

-

-

... More
Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

3

-

-

... More
S&F for GI reducer of 20mm to 15mm fixed in repair complete all as specified.

20

-

-

... More
S&F for GI union of 15mm dia fixed in repair complete all as specified and dirceted.

10

-

-

... More
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-In-Charge.

120

-

-

... More
S&F in repairs looking mirror of size 600mmx450mm and 5.0mm thick mirror with aluminum beading of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wood plugs with complete all as specified and directed.

5

-

-

... More
S&F for in repair brass spindle for 15mm size stop cock complete all as specifed

40

-

-

... More
15mm bore, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

100

-

-

... More
Preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge

80

-

-

... More
Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed by Engr-in-Charge. Make: Cera/Hindware/Parryware

10

-

-

... More
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

15

-

-

... More
S&F for solid PVC wall lining consisting of 5mm thick prelaminated colour(natural wood effect) PVC sheet of density 600 Kg/cum inclusive of solvent cement solution and fiting at site on PVC frame as per specified in drawing and directed by Engr-In-Charge.

10

-

-

... More
S&F in repairs vitreous china urinal flat back 465 x 355 x 265mm size , including grating and Connection to flushing pipe and outgoing pipe complete all as specified and directed.

5

-

-

... More
15mm bore long nose bib tap, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

25

-

-

... More
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

-

-

-

... More
M&L for welding for 6mm thick iron work n. exc 2.5 cm in running meter length fixed in repair complete all as specified.

100

-

-

... More
Dismantling structural steel Gates as in opening of hangers each leaf of size 2.5m x 9.5m, weight exceeding 400kg but not exceeding 1000kg including easing, greasing and rectification so as to move smoothly when operated and refixing the same at the specified location complete all as directed at site. Note:- The structural steel required for replacing the unserviceable steel members shall be measured and paid separately.

20

-

-

... More
S&F in repair PVC syphon with knob for PVC flushing cistern of 10 Litre of capacity complete all as specified and directed.

50

-

-

... More
S&F for MS PVC sheathed 20mm dia drapery rod of approved pattern and shade fixed in repair complete all as specified and as directed.

100

-

-

... More
S&F for GI Nipple of 15/20mm, 100mm length complete, fixed in repairs, all as specified and dirceted.

40

-

-

... More
M&L for glazed ceremic tiles 300 x 200 x 7 mm thick, as in dado, vertical surfaces set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

20

-

-

... More
M&L for non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

20

-

-

... More
S&F for end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia fixed in repair complete all as specified and as directed.

80

-

-

... More
Anodized aluminium powder coated window/ventilator side hung type without sash bars, aluminium sections weighting 0.55 Kg/ m (min 1.5mm thick) shutters incl 5.5mm tinted tinted glass with rubber gasket beading and looking arragement and wire mesh of size 0.56 mm dia of wire and 1.40mm aperture, jointing cleats, glazing cloiups, rubber packing, anodised aluminium fittings such as peg stays 150 mm long (1 nos), hinges type B21, 100 mm long (2 nos) suitable handle (1 no) etc including making good disturbed surfaces includng necessary complete all as specified and as directed.

5

-

-

... More
M&L for 60 mm thick interlocking machine pressed precast concrete interlocking paver block any shape, any colour and rubber finished type confirming to IS 15658-2006, M-35 grade laid and jointed in neat cement slurry with grey cement and pigment laid over 50 mm thick sand cushioning complete all as specified and directed.

80

-

-

... More
Cast iron work grade FG 150, machined, in pulleys and similar articles exc 5 kg each including railing/rollers suitable to match with railing at ground level for smooth movements of shutter complete all as specified and directed.

60

-

-

... More
S&F for GI union of 20mm dia fixed in repair complete all as specified and dirceted.

15

-

-

... More
Preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specfied and directed.

80

-

-

... More
Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

150

-

-

... More
M&L for 300 x 450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

30

-

-

... More
Anodised aluminium powder coated door shutters, fixed type with sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium fittings such as 150 mm long (4 nos) hinges, 200 mm long (2 nos) suitable handle,, 250mm long Aluminium Tower bolt (1 no), 140mm long aluminium door stopper 01 No and anodised alumnium snap beading, screws etc. complete all as specified and as directed.

20

-

-

... More
S&F for GI Elbow of 20mm dia fixed in repair complete all as specified and dirceted.

20

-

-

... More
S&F for in repair Vitreous China wash down water closet pan pedestal pattern white including fixing bolts, white/ coloured plastic seat cover,CP brass jet nozzle with 900 mm long PVC pipe complete all as directed.Make : Hindware/ Parryware

8

-

-

... More
S&F in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw complete all as specified and directed.

10

-

-

-

-

-

... More
Butt hinges, medium weight, cold rolled mild steel and fixed with screws to wooden frames or with welding to existing MS frames, 100 mm size, ISI marked, fixed in repairs, complete all as specified and directed by Engineer-in- Charge.

100

-

-

... More
Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

1000

-

-

... More
M & L for coloured heavy duty parking tiles 300MM X 300MM X 10 to 12 MM thick, set, jointed & pointed in neat cement slurry in floor with grey cement mixed with colour pigments over 20 mm thick screed bed in 1:6 CM complete all as spd. & directed.

40

-

-

... More
Taking down wooden shutter of any dscription n.exc 1.00 Square metre ,easing and adjusting and than refixing shutters with old builder hardware as required in the same opening complete all as specified and directed.

40

-

-

... More
S/F Mild steel bolts, purpose made, with hexagonal or square head at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long and dia of neck exceeding 12 but not exceeding 20mm complete.

5

-

-

... More
Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots complete including removal all debries exceeding 50m but not exceeding 100m all as specified and directed by Engineer-in-Charge.

100

-

-

... More
M&L for two coat of cement based paint on newly plastered surface including preparation of surface complete all as specified.

80

-

-

... More
S&F for Extruded aluminum alloy handle, fabricated type, anodized 125mm size, complete all as specified and directed.

35

-

-

... More
Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing, complete all as directed at site.

200

-

-

... More
S&F for Flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete all as specified and directed.

10

-

-

... More
S&F for 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges, fixed in repair complete all as specified and directed.

10

-

-

... More
S&F for 5.50mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square exe 0.5 Square metre in each pane etc complete all as specified and directed.

20

-

-

... More
S&F for GI sockets of of 20mm dia fixed in repair complete all as specified and dirceted.

20

-

-

... More
S&F rubber door seal 32mm wide and 1.5mm thick strip of mild steel with hard brush fixed with machine steel screw with washer in door bottom fixed in repair complete all as specified and directed.

50

-

-

... More
S&F for Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc fixed in repair complete all as specified and directed.

4

-

-

... More
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.

100

-

-

... More
M&L for three coat of white washing on new undecorated plastered surface including preparation of walls surfaces complete all as specified.

150

-

-

... More
S&F for GI Nipple of 15/20mm, 25mm length complete, fixed in repairs, all as specified and dirceted.

30

-

-

... More
S&F for Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

15

-

-

... More
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any redius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

10

-

-

... More
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.

80

-

-

... More
S&F for in repair 15mm dia bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as specified and dirceted.

40

-

-

... More
M&L for factory made steel windows conforming to IS-1038 with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Wire gauge shall be measured and paid for separately).

12

-

-

... More
S&F for Mild steel pressed handle oval type stove enameled black 150 mm size fixed in repairs complete all as specified and directed.

10

-

-

... More
S&F for in Repair rain water pipe 110mm dia with single socket joints fixed to wall with stack clamp fixed in repair complete all as specified and directed by Engineer-in-Charge

40

-

-

... More
M&L for one coat of oil bound distemper on old decorated surface including preparation of surface wall/ceiling complete all as specfied and directed.

300

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.