Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Provn Of Water Tank At Uri Lines At Damana Under Ge Jammu in Jammu, Jammu & Kashmir, with an estimated contract value of Rs. 87,84,571. The bid opening date for this tender is 21-10-2026 and the last date for bid submission is 25-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender - JK Tender
Opening Date21 Oct 2026
Closing Date25 Nov 2026
Tender Amount₹ 87,84,571
Costs
EMD
₹ 1,57,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Provn Of Water Tank At Uri Lines At Damana Under Ge Jammu
Contact
Tender Id
2026_MES_794972_1Tender No
CWE/T-99/2026-27Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY WORKS” as listed in Schedule ‘A’ Part-III
-
11048
-
... More
Lump sum price worked out by the Contractor for “COMPOUND WALL/FENCING/GATE WORKS ” as listed in Schedule ‘A’ Part-IV
-
381256
-
... More
Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part-V
-
160712
-
... More
Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY WORKS” as listed in Schedule ‘A’ Part-VI
-
121748
-
... More
Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY WORKS” as listed in Schedule ‘A’ Part-VII
-
949780
-
... More
Lump sum price worked out by the Contractor for “ROADS/PATH/HARD STANDING WORKS” as listed in Schedule ‘A’ Part-VIII
-
47833
-
... More
Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL WORKS” as listed in Schedule ‘A’ Part-IX
-
40742
-
... More
Lump sum price worked out by the Contractor for “DEMOLITION/ DISMANTLING WORKS” as listed in Schedule ‘A’ Part-X
-
750000
-
... More
Lump sum price worked out by the Contractor for “EARTHWORK FOR SCH 'A' PART-II TO PART -X” as listed in Schedule ‘A’ Part-XI
-
89737
-
... More
SCHEDULE `A' PART - XIII MISC B/R & E/M ITEMS is not prepriced by MES (BOQ)
-
-
-
... More
INTERNAL ELECTRIFICATION WORKS
-
-
-
... More
M& L Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed.
-
-
-
... More
S&F in LED lights fitting 1x 20W, 220V, batten type complete with LED tube rod 20 Watt with driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type, minimum surge protection 2.5 KV conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed
-
-
-
... More
S & F LED light fitting 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and directed
-
-
-
... More
Supply and fixing Modular Fan step regulator, 100W - 1 module 240 volts ISI marked complete all as specified and directed
-
-
-
... More
Disconnecting & taking out defective service cable any size and any type from roof, pole, pipe, floor, wall etc complete all as specified and directed
-
-
-
... More
Supply, laying and fixing of DWC HDPE pipe for protection for power cable (orange in colour) of size 50 mm dia complete with joint fittings and including cutting, jointing and clamping all as specified and directed.
-
-
-
... More
EXTERNAL ELECTRIFICATION WORKS
-
-
-
... More
Supply and fixing of submersible cable 16 Sqmm 3 core flat copper conductor heavy duty 1100 volts grade confirming to ISI all as specified and directed by Engr-in-Charge.
-
-
-
... More
Material and labour for LT panel outdoor type of size (1.2 X 1.2 X 0.6 metre) having thickness of 3.15mm and inner shell made out of 2mm thick mild steel sheet and mild steel angle section 50 x 50 x 6 mm mounted on PCC (1:2:4) type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication to make it dust / vermin proof and general construction confirming to IS : 8623/93, including taking down of old unserviceable panels from site complete all as specified and as directed.
Incoming: - (i) MCCB, 100 Amps, 4 Pole, 415 V, 25 KA - 01 Each, Al busbar of capacity 150 Amps - Set of four.
Outgoing: - (i) TPN MCB, 32 Amps, 4 Pole, 415 V, 16 KA - 02 Each
(ii) Automatic star delta starter 12.5 HP - 02 Each.
(i11) Single Phase Preventor of Capacity 100 Amp ( Suitable for 12.5 HP Pump ) - 02 Nos
(a) Digital Ammeter 0-400 A of size 96 Sqmm with selector switch - 01 No.
(b) Digital Volt meter 0-500 V of size 96 Sqmm with selector switch - 01 No.
(c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
(d) CT coils of suitable ratio - 01 Set.
-
-
-
... More
Material and labour for LT panel outdoor type of size (1.2 X 1.2 X 0.6 metre) having thickness of 3.15mm and inner shell made out of 2mm thick mild steel sheet and mild steel angle section 50 x 50 x 6 mm mounted on PCC (1:2:4) type B-1 platform 45 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process it dust / vermin proof and general construction confirming to IS : 8623/93, including taking down of old unserviceable panels from site complete all as specified and as directed.
Incoming: - (i) MCCB, 100 Amps, 4 Pole, 415 V, 25 KA - 01 Each, Al busbar of capacity 150 Amps - Set of three.
Outgoing: - (i) MCCB, 63 Amps, 4 Pole, 415 V, 16 KA - 02 Each
(ii) star delta starter 20 HP - 01 Each
(iii) Single Phase Preventor of Capacity 125 Amp ( suitable for 20HP Motor)- 01 Nos
(a) Digital Ammeter 0-400 A of size 96 Sqmm with selector switch - 01 No.
(b) Digital Volt meter 0-500 V of size 96 Sqmm with selector switch - 01 No.
(c) Indicator Lamp RYB 22.5mm dia LED type 240 volts AC with incoming including back up protection by 2 Amp MCB RYB with holder - 01 set of three.
(d) CT coils of suitable ratio - 01 Set.
-
-
-
... More
EXTERNAL WATER SUPPLY WORKS
-
-
-
... More
Material and Labour for Mild Steel /CI/DI specials for spigot & socketed/flanged CI/DI pipes 150mm/100mm dia, such as bends(any type, radious and angle) Reducer, Tapers any type (straight bends, increasing, decreasing or double socket etc) tee, pieces, single branches "Y" junction, double branches cross(all sockets or socket and spigot) collars, caps and plugs, complete all as specified and as directed.
-
-
-
... More
Supply and fixing Monoblock pump set suitable for 415 V, 3 phase system having capacity 12.5 HP (01 Running, 01 Standby). Head Range - 10 to 32mtr, RPM 2900 to 3000, flow rate:- 12 to 37.5LPS
-
-
-
... More
Supply and fix Foot Valve conforming to IS 4038, 150 mm (6”) dia complete all as specified and as directed.
-
-
-
... More
Supply , Installation and commissioning of Submersible pump capacity of 20HP,1260 LPM electric driven 415 V, TP suitable for 100 mm dia bore well complete all as specified and directed complete sall as specified and directed. Head Range - 104 to 24mtr, Discharge rate:- 0 to 1600LPM
-
-
-
... More
Supply and fixing of flow meter with modbus protocol / weather proof with protection agaionst over voltage including complete mechanical work and piping for flow meter fitting all as specified and directed. Make - kirloskar/Leader or equivalent makes of following size :
(i) Flow meter 150 mm dia complete all as specified and directed
-
-
-
... More
Drilling of Trail Bore Hole 300mm (12 inch) dia from ground level to 100 meter in any strata by ROTARY METHOD method as per IS : 2800 1979 (revised and amended) below ground level through any kind of strata soils/rocks, disposal of surplus soil within a distance of 100m, well rammming and stablizing of material , transportation of drilling Rig and other T&P required, keeping space for pea gravel packing in and including lowering and extraction of casing pipes of suitable thickness after lowering of designed assemble of EWR pipe complete all as specified and as directed Notes:- 1. ERW housing pipes shall be measured and paid seperately. 2. Casing pipe alongwith direct rotary drill Pipes with with tools shall be arranged by the contractor and the same shall remain property of contractor after extraction. 3. In case of non extraction of casing pipe during the course of drilling any type of mishappening, any type of fishing operation of failure of bore well the contractor will have no claim what so ever on this account.
The contractor has to submit the test result/report as per IS:2800(Part-II -1979(with amendment) as following:- (a) Results of the tubewell depth and water level measurements. (b)Results of development and drawdown test are to be given in tabular form as per relevant IS. (c) The vertically test report shall be given as per the relevant IS. (D). The Housing/ Casing pipe shall be inserted only after certificate given by GE for sucessful trial bore hole.
-
-
-
... More
Enlargement of borehole from 300 mm to 500mm from Ground Level to 100 mtrs. NOTES:- (i) The rate for development of trial bore beyond 100mtr depth, if ordered by GE depending upon the CGWB recommendation or the basis of the Electrical logging Report, will be admissible at the rater of this Item. (ii)The note is applicable for verticality Test of the Tube-Well Structure shall be carried out by the contractor and the cost is deemed to be included in the Item rate.
-
-
-
... More
Supplying, assembling including lowering and fixing liner assembly or strainer etc in position (net affective length shall only measured and paid) all as specified below.
-
-
-
... More
(i) Mild steel ERW bevelled end pipe 300mm (12 inch) nominal bore having min 8 mm wall thickness confirming to IS:4270-2001 and all around welded with 03 Nos stiffeners of flat iron 75x8mm, 150 mm long, complete all as specified ans as directed.
-
-
-
... More
(iI) Mild steel ERW bevelled end pipe 200mm (8 inch) nominal bore having min 8 mm wall thickness confirming to IS:4270-2001 and all around welded with 03 Nos stiffeners of flat iron 75x8mm, 150 mm long, complete all as specified ans as directed.
-
-
-
... More
(iii) Mild steel ERW bevelled endslotted housing nominal bore 200mm (8 inch) nominal bore having min 8 mm wall thickness confirming ti IS:4270-2001 having slot size of 1.6mm x75mm as per (IS:8110:2000) and all around welded with 03 Nos stiffeners of flat iron 75x8mm, 150 mm long, complete all as specified ansd as directed.
-
-
-
... More
Housing pipe clamps made of MS flat of size 100 mmx 12mm and 750mm long for 300mm (12 inch) bore pipe with suitable bolts, nuts and washers all as specified and as directed.
-
-
-
... More
Supply and filling Pea gravel of Size 2mm to 6mm around the liner assembly from bottom to ground the level including continous watering during development all as directed by Engr-in-Charge.
-
-
-
... More
Supply and fixing Mild Steel Well Cap for (12 inch) 300mm bore made out of mild steel ERW 8mm thick threaded casing puipe complete all as specified and as directed.
-
-
-
... More
Development of Tube Well by means of pumping by Air compressor of minimum pressure 1400 CFM 350 Psi.(Compressor to be arranged by contractor at his own cost), until sand free and clear water upto 5 PPM is obtained at optimum yield complete all as specified and directed;-
First 24 Hrs of development (collectively)
Note;- The Cost of the yeild test by V Notch method and testing of water sample (chemical and biological from Govt approved Laboratary/ Regional Research Laboratry to confirm the potabillity of water as per IS-10500-2012 shall be deemed to be included in the rates quoted by the contractor and nothing extra from the department shall be a admissible on this account
-
-
-
... More
Supplying Strata sample box made of Ist class soft wood (Deodar) with glazed shutter and pigeon holes for depth dsample at the interval of every 3 meters and supplying of strata chart duly marked on 3 mm thick laminated sheet of size 4 inch x 3 inch giving complete details of display of installation, complete all as specified and as directed.
-
-
-
... More
Supply and Fixing MS 200 mm(8 Inch) bail plug having minimum thickness 8 mm all as per IS: 2800;1991 (With latest amendments) complete all as specified & as directed.
-
-
-
... More
Flat Iron of size 50 x 6mm as centre guides of required size including welding to casing pipe complete all as directed.
-
-
-
... More
Construction of foundation of Tube well of size 1.om x 1.0m having minimum 45 mm thick PCC 1:3:4 type B-1 (using 20mm graded crushed stones aggregate) laid over 75 mm tick PCC 1:3:6 type C-2 with GI pipe 80mm bore medium grade-02 Nos embdedd through out the block of suitable length with GI plug and socket fixed on end complete all as specified and as directed.
-
-
-
... More
M& L for welding of reducer of MS pipe of thickness 8 mm amd size 300mmx200mm and approximate length 1mtr all as specified and directed by Engr-in-Charge.
-
-
-
... More
Supply and Fixing Lifting tripod for lowering / lifting of submersible pumps with in buitt chain pulley system loading capacity upto 10 tonnes height 3mtr complete all as specified and directed.
-
-
-
... More
Conducting of Electric Logging of borehore before lowering of linear assembly as directed by Engr-in-charge.
-
-
-
... More
Supply and fixing Mild steel Analog Pressure gauge ranging from 0 - 300 PSI complete all as specified and directed.
-
-
-
... More
SEWAGE DISPOSAL WORKS
-
-
-
... More
M&L 150mm bore/inner dia Double wall corrugated HDPE pipes (SN-4) with intergral socket and necessary fttings, laid in trenches jointed as per manufacturer instruction complete all as spd and directed at site.
-
-
-
... More
NOTE: The Schedule of credit has been attached in tender in pdf format and amount of credit schedule i.e Rs 4,00,000.00 shall be deducted from the total amount of BOQ to arrive at the contract Sum
-
-
-

