Military Engineer Services Tender

... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Reapir To Road Incl Road Furniture In Aor Of Age B/r-i At Mendhar, Bg And Hamirpur Under Ge 881 Ews in Poonch, Jammu & Kashmir, with an estimated contract value of Rs. 22,00,000. The bid opening date for this tender is 06-11-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Military Engineer Services - MES Tender - JK Tender

Opening Date6 Nov 2026
Closing Soon20 Nov 2026
Tender Amount₹ 22,00,000 
Notes
Download

Costs

Description

Reapir To Road Incl Road Furniture In Aor Of Age B/r-i At Mendhar, Bg And Hamirpur Under Ge 881 Ews

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal watering & well ramming ( including supply of road metal), complete all as specified and directed.

1

-

-

... More
Applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 10 kg per 10 sq metre on WBM surface, complete all as specified and as directed.

88

-

-

... More
Providing premix bituminous macadam with 4% bitumen binder by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) (paving bitumen VG-30) by weight of total mix spread, rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber complete all as specified and directed. Note:- (I) In case the binder contents by weight of total mix is less than 4% as per per actual design mix, The price adjustment shall be made as per average rates of all purchase voucher for bitumen pertaining to this work. if the total binder contents as per design mix is more than 4% no price adjustment shall be made for the same. (II) Job mix formula for bituminous macadam shall be obtained from the institutions specified in CA prior to commencement of work and shall be got approved from the GE. (iii) The Contractor shall submit certificate issued to Hot mix plant that plant is SDAC compliant before incorporating work at site. The Hot Mix plant visit has to be organized by Contractor for approval of GE. (iv) The plant shall be automatic type which must have facility to print the details of composition of material incorporated with all batches of SDAC.

44

-

-

... More
Preparingof existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc.complete all as specified and as directed.

170

-

-

... More
Applying evenly a priming/ tack coat with bituminous primer using paving bitumen at 05 kg per 10 sq metre on existing black top surface, complete all as specified and as directed.

259

-

-

... More
Material and labour for bituminous premixed carpet, 30mm consolidated thickness, with 0.405 cum of stone chippings mixed with 21.90 kg of binder per 10 sqm using paving bitumen, rolled and compacted with 8 to 10 ton capacity power roller to required gradient and camber to a uniform smooth surface complete all as specified. Note:- (i) The premixed carpet shall be mixed in computerized approved hot mixed plant. (ii) The premixed carpet shall be laid with self-propelled mechanical paver. (iii) The contractor shall submit the computerized slip of premixed carpet of each load.

259

-

-

... More
Premix sand seal coat using (paving bitumen ) @ 6.8 kg / 10 sqm blinded with sand @ 0.06 cum /10 sqm and rolled with 8 to 10 tonne power roller to a uniform smooth surface, complete all as specified and as directed.

259

-

-

... More
M& L for painting lines, dashes, arrows, letters etc on roads, pavements adequate no of coatsand the like exc 10 cm wide with road marking paint, white or golden yellow with special applicator machine all as per manufacture instructions complete all as specified and as directed by Enginner-in-Charge.

163

-

-

... More
Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced, complete all as specified

22

-

-

... More
PCC 1:5:10 ( nominal mix) type E-2 using 40 mm graded crushed stone aggregate as in sub base for tiling , complete all as specified.

12

-

-

... More
Sand filling under floors including watering, ramming and rolling, for laying of interlocking tiles complete all as specified.

3

-

-

... More
Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, fixed with grey cement and pigment, set and jointed complete all as specified and as directed.

120

-

-

... More
PCC 1:2;4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in coping of wall / protecting interlocking tiles and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

3

-

-

... More
Dismantaling of stone slabs and tiles / Machine pressed precast concrete interlocking paver block of any description or thicknes in flors, aprons etc laid bedded and pointed any mortor, complete all as specified.

2.6

-

-

... More
Fixing only 80 mm thick Machine pressed precast concrete interlocking paver block any shape and size obtained from srl item no. 17 above, complete all as specified and as directed.

26

-

-

... More
Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 18 of tender doucments.

-

-

-8250



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.