Military Engineer Services Tender
... More
The MES has issued a formal invitation for competitive bids for the Military Engineer Services project, for Repair/ Replacement Of E/m Internal Fittings/ Fixtures And Wiring In Various Units At Poonch And Repair/replacement Of External Security Lights Fixtures, Solar Water Heater, Ro, Geyser And Connected Works In The Aor Of Stn Hq Poonch Under Ge 881 Ews in Poonch, Jammu & Kashmir, with an estimated contract value of Rs. 41,50,000. The bid opening date for this tender is 28-05-2025 and the last date for bid submission is 16-06-2025. Interested bidders for Military Engineer Services tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Military Engineer Services - MES Tender
Electrical and Electronics
Solar Installation and Products
Electrical Works
Eprocure
Opening Date28 May 2025
Closing Date16 Jun 2025
Tender Amount₹ 41,50,000
Costs
EMD
₹ 83,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_710972_1Tender No
GE/PNH-33/2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
One light point controlled by two numbers, two way switch 6 Amp complete all as specified and directed.
2
-
-
... More
One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.
80
-
-
... More
One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.
180
-
-
... More
One bell point controlled by one way switch 6 Amp complete all as specified and directed.
10
-
-
... More
All as per srl item No 2 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.
120
-
-
... More
S&F ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.
200
-
-
... More
S&F switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.
1005
-
-
... More
S&F switch piano flush type 6 Amp two way, (ISI marked), complete all as specified and directed.
4
-
-
... More
S&F switch piano bell push flush type 5 Amp single pole one way (ISI marked) complete all as specified and directed.
10
-
-
... More
S&F socket outlet 2 in 1, 3 pin, 6 Amp flush type universal, complete all as specified and directed.
170
-
-
... More
S&F Switch socket combination, 5 pin, 5 Amp flush type universal, complete all as specified and directed.
180
-
-
... More
S&F Switch socket multipurpose combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.
120
-
-
... More
S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.
90
-
-
... More
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.
60
-
-
... More
S&F electric bell ding dong type 230 volts AC supply 50 Hz complete all as specified and directed by Engineer-in-Charge.
10
-
-
... More
Supply and fixing in repair LED batten 1x 20W wall mounted with polycarbonate housing & integrated electronic driver and connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
600
-
-
... More
Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified and directed.
20
-
-
... More
S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper
conductor cable of suitable size. complete. all as specified and directed.
5
-
-
... More
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
50
-
-
... More
S&F in repair gate light fittings, outdoor type, high power , 25 watt, IP65 luminaire, prewired with suitable pole for mounting complete all as specified and directed.
Make: Havells cat part No. Coral Opal IP65 or equivalent make as mentioned in PS
4
-
-
... More
Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver including suitable bracket fixed to wall/ pole complete with IP 65/66 protection complete all as specified and directed.
60
-
-
... More
S&F in repair LED inverter lamp CDL 10 /12 watt with holder base (B22) type, complete all as specified and directed.
300
-
-
... More
S&F in repair LED driver suitable for 34 watt LED ceiiling light fittings and making connection to fitting complete all as specified and directed.
15
-
-
... More
S&F in repair single pole and neutral enclosure with a two pin and metal earth plug and socket complete with & incl one single pole MCB of 20 Amps complete all as specified and directed.
5
-
-
... More
S&F in repair sheet metal enclosure for DBs, vertical TPN double door (IP43), 4 ways built in bus bars suitable for 415 volts, AC, 50 Hz and suitable for FP MCCB as incommer and out going SP/TP MCBs complete all as specified and directed.
Note:- MCBs shall be measured and paid separately.
4
-
-
... More
S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 4 ways built in bus bars suitable for 240 volts, AC, 50 Hz , including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.
15
-
-
... More
S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.
12
-
-
... More
S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.
5
-
-
... More
S&F in repair MCB TPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.
4
-
-
... More
S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.
55
-
-
... More
S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.
180
-
-
... More
S&F in repair Switch socket multipurpose combination 5 in 1, 20/16 amp flush type universal including box with 4 fixing holes, complete all as specified and directed.
100
-
-
... More
S&F in repair Switch socket multipurpose combination 2 in 1, 6 amp flush type universal including box with 4 fixing holes, complete all as specified and directed.
100
-
-
... More
Taking out old unsv exhaust fan from site and replacement of exhaust fan made up of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, 1200 RPM, copper winding of sweep 300mm incl all connecting accessories complete all as specified and directed by Engineer-in-charge.
10
-
-
... More
Taking out old unsv exhaust fan from site and replacement of exhaust fan made up of steel body, AC single phase, voltage 230 V, 50 Hz, copper winding of sweep 300mm incl all connecting accessories complete all as specified and directed by Engineer-in-charge.
10
-
-
... More
Taking out old unsv exhaust fan from site and replacement of exhaust fan made up of steel body, AC single phase, voltage 230 V, 50 Hz, copper winding of sweep 450mm incl all connecting accessories complete all as specified and directed by Engineer-in-charge.
4
-
-
... More
S&F in repair PVC casing caping of size upto 32 mm incl all fixing accessories complete all as specified and directed.
40
-
-
... More
S&F Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.
10
-
-
... More
S&F in repair Sub main wiring with single core cable 2x 4 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed.
Note:-Three wire of 4 Sqmm and one run of pvc conduit/casing caping shall be measured as one unit.
150
-
-
... More
S&F in repair Sub main wiring with single core cable 2x 6 Sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 6 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly, complete all as specified and directed.
Note:-Three wire of 6 sqmm and one run of PVC conduit/casing caping shall be measured as one unit.
70
-
-
... More
S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat or circular of size 6 Sqmm 2 core & including taking down old old unsv service cable connection, complete all as specified and directed.
400
-
-
... More
S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10 Sqmm 2 core including taking down existing old service connection, complete all as specified and directed.
370
-
-
... More
Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at contractor's work shop, incl dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, refixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, greasing/oiling etc assembling, cleaning and testing of ceiling fan complete all as specified and directed.
Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only.
(ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'.
(iii) Cost of minor part i.e. Cotter pin, screws shall be deemed to included in the cost of quoted rate.
300
-
-
... More
Supply only bearing good quality for ceiling fan 1200mm/1400mm sweep ISI marked complete all as specified and directed.
150
-
-
... More
Supply only Gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as specified and directed.
100
-
-
... More
Supply only capacitor 2.5 mfd ISI marked complete all as specified and directed.
140
-
-
... More
Supply only brass bracket assy for hanging the ceiling fan 1200mm/1400mm sweep complete all as specified and directed.
50
-
-
... More
Supply only 3 core flexible wire 40/.0076, white colour from ceiling rose to fan connector complete all as specified and directed.
120
-
-
... More
Supply only stator shaft for ceiling fan complete all as specified and directed.
20
-
-
... More
Taking out old unsv ceiling fan from site of capacity 1200/1400 mm sweep and replacement with ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) incl all connecting accessories complete all as specified and directed by Engineer-in-charge.
40
-
-
... More
M&L for removing of old burnt winding of ceiling fan any size, type and rewinding of stator winding with superior quality copper wire with insulation complete all as specified and directed.
150
-
-
... More
Repair and maintenance of unserviceable exhaust fan of any cap and sweep by dismantling the exhaust fan parts, inspecting the serviceability of parts, refixing of serviceable parts after cleaning, replacement of unerviceable parts i.e. beaing, bush, capacitor, connecting wires, fan blade, locknut, rubber pad etc, oiling/greasing, cleaning and testing of exhaust fan complete all as specified and directed.
Note: (i) Unserviceable parts replaced shall be measured and paid separately under relevant items of Sch 'A' as supply only.
(ii) Rewinding of stator winding shall be measured & paid for separately under relevant item of Sch 'A'.
(iii) Cost of minor part i.e. screws shall be deemed to included in the cost of quoted rate.
50
-
-
... More
Supply only double ball bearing (ISI marked) for exhaust fan of 200 mm sweep to 450 mm sweep fan complete all as specified and directed.
20
-
-
... More
Supply only gun metal bush for Exhaust fan of any capacity. complete all as specified and directed.
20
-
-
... More
M&L for rewinding of 450mm sweep exhaust fan motor with superior quality copper winding wire with insulation complete all as specified and directed.
10
-
-
... More
M&L for rewinding of 300mm sweep exhaust fan motor with superior quality copper winding wire with insulation complete all as specified and directed.
20
-
-
... More
Supply only blade of exhuast fan of 200 mm sweep to 450 mm sweep as per existing make complete all as specified and directed.
10
-
-
... More
Taking down old unsv street light fittings any type from pile/ wall/ other similar situation and refixing, re-connecting the same in existing position after carrying out necessary repair/ replacement of unsv accessories to make the fittings functional, complete all as speecified and directed.
Note:-Accessories required to make the fittings functional shall be measured & paid seperately as supply only under relevent items.
190
-
-
... More
Supply only the following accessories to be incorporated for repair of street light fittings taken out under item here in above are as under :-
-
-
-
... More
LED driver for street light fittings of 40 watt capacity complete all as specified and directed.
50
-
-
... More
LED driver for street light fittings of 45 watt capacity complete all as specified and directed.
50
-
-
... More
LED driver for street light fittings of 60/70 watt capacity complete all as specified and directed.
50
-
-
... More
LED driver for street light fittings of 90/120 watt capacity complete all as specified and directed.
40
-
-
... More
S&F thermo plastic street light weather proof out door type junction box of size 250mmx 200mm x 105 mm complete with 4 way connector-01 No, 6 Amps SP MCB-01 No, easily openable and having locking arrangement including incoming and out going cable holes with fixing MS clamp and water tight polymide cable gland for each connection with & including taking down old unsv junction box, complete all as specified and directed.
10
-
-
... More
Supply and laying in trenches or passing through pipe or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 3.5 core including taking down old/ unsv cable any type complete all as specified and directed.
100
-
-
... More
All as per Item No 69 above but 16 Sqmm 2 core complete all as specified and directed.
100
-
-
... More
All as per Item No 68 above but 10 Sqmm 2 core complete all as specified and directed.
100
-
-
... More
Excavation in trenches n.exc 1.5M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in any type of soil and getting out complete all as specified and as directed.
20
-
-
... More
Returning, filling soil in trenches including spreading levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
9
-
-
... More
Removal excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and as directed.
11
-
-
... More
Supply and laying sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable (total 23 cm) in trenches, duly punning to a thickness of 18 cm complete all as specified & directed. ( Note: Thickness after punning shall be measured for payment )
8
-
-
... More
Supply and laying sub-class 'B' bricks locally available bricks laid in trenches perpendicular to UG cable for cable protection complete all as specified and as directed.
0.8
-
-
... More
S&F in repair 40mm bore galvanised steel water tubing, light grade including all fittings laid in trenches/ fixed to pole/ along wall/ floor etc for protection of cable/ strip including fixing to pole with M.S. clamp, nuts, bolts etc complete all as specified and as directed.
18
-
-
... More
Supply & fix PVC insulated, 1100 volts grade, stranded aluminium conductor cable 2.5 Sqmm, twin core, connecting from Street light junction box to light fittings including taking down old/ unsv cable any type complete all as specified and directed.
100
-
-
... More
S&F in repair PVC conduit/pipes 25 mm dia and fixed with the pole by clamping / saddling for protection of connecting wires, connection from junction box to light fittings, including taking down old pipe any type complete all as specified and as directed.
30
-
-
... More
S&F in repair decorative gate / garden light made up of high grade unbreakable polycarbonate material suitable for & including 20 watt LED lamp (B22) fixed with & including stand post of 40mm dia GI pipe light grade, 1 mtr long and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed.
4
-
-
... More
S&F Energy efficient LED street light fittings, 45 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed.
50
-
-
... More
S&F Energy efficient LED street light fittings, 60 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed.
70
-
-
... More
S&F Energy efficient LED street light fittings, 70 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed.
50
-
-
... More
S&F Energy efficient LED street light fittings, 90 Watt, 230 volt AC out door type with high pressure die-cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP66 protection, with inbuilt surge protection device including taking down old us light fittings any type complete all as specified and as directed.
30
-
-
... More
Supply and fixing in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
15
-
-
... More
Supply and fixing in repair LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.
15
-
-
... More
S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint including taking down u/s bracket any type all as specified and as directed.
10
-
-
... More
S&F in repair pole mounted street light timer prewired DB with digital time switch single phase, 240 Volts, 50 Hz of 32 amps capacity including suitable MCB, timer contactor, ammeter, voltmeter, selector switch (Auto/Manual) alongwith bypass arrangements etc fitted on pole with 02 Nos of MS clamp incl nut, bolt & washers complete all as specified and directed.
1
-
-
... More
All as per Srl item No. 87 above but for 3 phase, 4 wire, 440 volts, 40 amps complete all as specified and directed.
1
-
-
... More
S&F in repair bus bar of capacity 100 amps, 4 pole, 440 volts alongwith powder coated sheet metal enclosures incl 04 Nos of aluminium bus bar (3P+1N) mounting on on insulators complete all as specified and directed.
2
-
-
... More
All as per Srl item No. 89 above but for 200 amps complete all as specified and directed.
2
-
-
... More
S&F in repair contactor of range 9-32 amps (01 NO + 01NC) single phase conventional/universal AC electronic coil version type suitable for street light timer DB complete all as specified and directed.
2
-
-
... More
All as per Srl item No. 92 above but of range 25-45 amps (01 NO + 01NC) 3 pole complete all as specified and directed.
2
-
-
... More
M&L in repair for Earthing in replacement for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto and PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009.
2
-
-
... More
M&L for Disconnecting electric & water connection to geyser of capacity 25/35/50 litr, taking down from existing position, dismantling and inspecting all the parts for its serviciability, cleaning of serviceable parts i.e. base assembly, connecting lead, thermostat, electric contact, electric wiring, indicators, safety valves etc re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant item of Sch 'A' as supply only (ii) Cost of minor items i.e. screws, nuts, bolts etc shall be deemed to be included in this item
60
-
-
... More
Supply only heating element of capacity 2 KW, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.
30
-
-
... More
Supply only heating element of capacity 1.5 KW, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.
30
-
-
... More
Supply only thermostat, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.
50
-
-
... More
Supply only indicator lamp suitable for existing size, type & make of geyser complete all as specified and as directed.
20
-
-
... More
Supply only geyser safety valve suitable for existing size, type & make of geyser complete all as specified and as directed.
20
-
-
... More
Supply only PVC pipe connection of heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.
60
-
-
... More
Supply only aluminium/chromium type flecxible connection, heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.
4
-
-
... More
Supply only inner tank made out of steel sheet conforming to IS, suitable for 25 litres capacity of geyser, vertical type complete all as specified and as directed.
6
-
-
... More
Supply only inner tank made out of steel sheet conforming to IS, suitable for 35/50 litres capacity of geyser, vertical type complete all as specified and as directed.
6
-
-
... More
Supply only proper glass wool filling in between inner and outer tank of geyser of 25/50 litrs capacity of any make/type complete all as specified and as directed.
1
-
-
... More
Supply only non return valve made out of brass fixed in vertical position of suitable dia complete all as specified and as directed.
18
-
-
... More
Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 25 litres capacity of geyser complete all as specified and as directed.
30
-
-
... More
Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 35/50 litres capacity of geyser complete all as specified and as directed.
10
-
-
... More
M&L for complete servicing and repair of solar water heating system of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Note: Unsv accessories will be measured and paid seperately under respective items of Sch as supply only
10
-
-
... More
Supply only solar water heater collector FPC type screw less technology suitable for existing solar water heating system, ISI marked complete all as specified and as directed. Make Recold or equivalent as approved By GE.
3
-
-
... More
Supply only solar collector glass suitable for existing solar water heating system complete all as specified and as directed.
3
-
-
... More
Supply only Glycol for solar water heating system complete all as specified and as directed.
10
-
-
... More
Supply only solar collector with copper brazing complete all as specified and as directed.
5
-
-
... More
Supply only heating element of capacity 3 KW, ISI marked suitable for existing solar water heating system complete all as specified and as directed.
15
-
-
... More
Supply only make up tank of 500 Ltr capacity for existing solar water heating system complete all as specified and as directed.
5
-
-
... More
Supply only gasket and end joints suitable for existing solar water heating system complete all as specified and as directed.
10
-
-
... More
M&L for complete servicing and repair of RO Plant of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Noe:- Unsv accessories will be measured and paid seperately under respective items of Sch as supply only.
5
-
-
... More
Supply only micron cartridge filter sponge 2" x 10" of 4 micron suitable for existing RO plant complete all as specified and directed.
10
-
-
... More
Supply only RO membrane concealed type, 75 GLD suitable for existing RO plant complete all as specified and directed.
20
-
-
... More
Supply only pressure booster pump suitable for existing RO plant, 24 volt DC complete all as specified and directed.
10
-
-
... More
Supply only primary sedimentation filter pressure booster pump suitable for existing RO plant, complete all as specified and directed.
10
-
-
... More
Supply only post silver activated carbon cartidge for improvement of water taste, complete all as specified and directed.
12
-
-
... More
Supply only SMPS 24 volt DC adopter suitable for any type/capacity of RO water purifier, complete all as specified and directed.
5
-
-
... More
Supply only solenoid switch (water level controller) suitable for any type/capacity of RO water purifier, complete all as specified and directed.
5
-
-
... More
Supply and fix in replacement of thermostat switch suitable for solar water heater of size 150 litre to 300 litre, complete all as specified and directed.
Note: Make and model of thermostat shall be as per sample available at site.
5
-
-
... More
Cleaning of storage tank of solar heating system of any capacity/ size alongwith complete glass tubes for inside/outside solar panel for smooth and efficient function of systemcomplete all as specified and directed.
Note:-
(a) Any damage including glass parts/solar tubes/solar panel as solar water heating system during the cleaning process will be make good/replaced by contractor, cost of same deemed to be included in the rate quoted
(b) All rubber parts or minor hidden parts such as PVC elbow, joint, plug etc shall be replaced by contractor for efficient functioning of system and cost of same deemed to be included in the rate quoted
5
-
-
... More
Cleaning of HDPE water storage tank from inside and outside of for smooth and efficient function of system & removing scale/dirt from inlet/outlet pipe complete all as specified and directed.
5
-
-
... More
Cleaning of solar collector complete in all aspects incl testing complete all as specified and directed.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%